! Started logfile: /vlbi/uf001/uva//J1546+0026_X_dfm.log on Mon Jan 14 03:27:02 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1546+0026_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1546+0026_X_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.914286 visibilities/baseline/integration-bin. ! Found source: J1546+0026 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 20736 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1546+0026_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.017765Jy sigma=21.436735 ! Fit after self-cal, rms=0.856031Jy sigma=17.943220 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6928 mas, bmaj=1.701 mas, bpa=-2.322 degrees ! Estimated noise=0.370196 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0981989 Jy ! Component: 100 - total flux cleaned = 0.14175 Jy ! Total flux subtracted in 100 components = 0.14175 Jy ! Clean residual min=-0.013584 max=0.030028 Jy/beam ! Clean residual mean=-0.000001 rms=0.003296 Jy/beam ! Combined flux in latest and established models = 0.14175 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.14175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.132996Jy sigma=2.736643 ! Fit after self-cal, rms=0.132715Jy sigma=2.731132 ! Inverting map ! Added new window around map position (-1.2, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0331783 Jy ! Component: 100 - total flux cleaned = 0.0584294 Jy ! Total flux subtracted in 100 components = 0.0584294 Jy ! Clean residual min=-0.012345 max=0.024238 Jy/beam ! Clean residual mean=-0.000001 rms=0.002568 Jy/beam ! Combined flux in latest and established models = 0.200179 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 48 components and 0.200179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112884Jy sigma=2.278323 ! Fit after self-cal, rms=0.112334Jy sigma=2.267841 ! Inverting map ! Added new window around map position (1.2, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0245559 Jy ! Component: 100 - total flux cleaned = 0.0437086 Jy ! Total flux subtracted in 100 components = 0.0437086 Jy ! Clean residual min=-0.009000 max=0.013068 Jy/beam ! Clean residual mean=0.000000 rms=0.002027 Jy/beam ! Combined flux in latest and established models = 0.243888 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 66 components and 0.243888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099368Jy sigma=1.969203 ! Fit after self-cal, rms=0.099242Jy sigma=1.967285 ! Inverting map ! Added new window around map position (-1.2, -2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167062 Jy ! Component: 100 - total flux cleaned = 0.0306631 Jy ! Total flux subtracted in 100 components = 0.0306631 Jy ! Clean residual min=-0.007244 max=0.010957 Jy/beam ! Clean residual mean=0.000001 rms=0.001731 Jy/beam ! Combined flux in latest and established models = 0.274551 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 76 components and 0.274551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091802Jy sigma=1.792174 ! Fit after self-cal, rms=0.091749Jy sigma=1.791073 ! Inverting map ! Added new window around map position (2.2, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012896 Jy ! Component: 100 - total flux cleaned = 0.0237443 Jy ! Total flux subtracted in 100 components = 0.0237443 Jy ! Clean residual min=-0.006055 max=0.010234 Jy/beam ! Clean residual mean=0.000001 rms=0.001534 Jy/beam ! Combined flux in latest and established models = 0.298295 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 94 components and 0.298295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086804Jy sigma=1.675235 ! Fit after self-cal, rms=0.086788Jy sigma=1.674359 ! Inverting map ! Added new window around map position (-2.6, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109643 Jy ! Component: 100 - total flux cleaned = 0.0201205 Jy ! Total flux subtracted in 100 components = 0.0201205 Jy ! Clean residual min=-0.005256 max=0.009663 Jy/beam ! Clean residual mean=0.000001 rms=0.001374 Jy/beam ! Combined flux in latest and established models = 0.318416 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 111 components and 0.318416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083170Jy sigma=1.589701 ! Fit after self-cal, rms=0.083125Jy sigma=1.588849 ! Inverting map ! Added new window around map position (5.2, -1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.009711 Jy ! Component: 100 - total flux cleaned = 0.017638 Jy ! Total flux subtracted in 100 components = 0.017638 Jy ! Clean residual min=-0.004515 max=0.005536 Jy/beam ! Clean residual mean=0.000001 rms=0.001241 Jy/beam ! Combined flux in latest and established models = 0.336054 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 128 components and 0.336054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080426Jy sigma=1.526777 ! Fit after self-cal, rms=0.080395Jy sigma=1.525974 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8504 mas, bmaj=1.968 mas, bpa=-2.638 degrees ! Estimated noise=0.258421 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178131 Jy ! Component: 100 - total flux cleaned = 0.0319585 Jy ! Component: 150 - total flux cleaned = 0.0440271 Jy ! Component: 200 - total flux cleaned = 0.0545714 Jy ! Total flux subtracted in 200 components = 0.0545714 Jy ! Clean residual min=-0.005982 max=0.008769 Jy/beam ! Clean residual mean=0.000003 rms=0.001900 Jy/beam ! Combined flux in latest and established models = 0.390625 Jy ! Performing phase self-cal ! Adding 102 model components to the UV plane model. ! The established model now contains 202 components and 0.390625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073999Jy sigma=1.370251 ! Fit after self-cal, rms=0.073953Jy sigma=1.368782 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8504 x 1.968 at -2.638 degrees (North through East) ! Clean map min=-0.0059354 max=0.1286 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.98 HN 0.99 KP 1.00 ! LA 0.87 MK 1.09 NL 1.16 OV 0.98 ! PT 0.89 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.96 HN 0.97 KP 0.98 ! LA 0.88 MK 1.14 NL 1.16 OV 0.98 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.96 HN 1.00 KP 0.99 ! LA 0.87 MK 1.04 NL 1.13 OV 1.00 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.98 HN 1.04 KP 1.00 ! LA 0.86 MK 1.10 NL 1.12 OV 1.00 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 HN 0.96 KP 0.99 ! LA 0.89 MK 1.00 NL 1.13 OV 0.97 ! PT 0.90 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.99 HN 1.07 KP 1.00 ! LA 0.87 MK 1.05 NL 1.12 OV 0.99 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.98 HN 1.01 KP 1.00 ! LA 0.89 MK 1.03 NL 1.12 OV 0.99 ! PT 0.92 SC 1.08 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 1.05 KP 1.00 ! LA 0.87 MK 1.06 NL 1.14 OV 0.99 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 1.03 KP 1.01 ! LA 0.88 MK 0.96 NL 1.16 OV 0.98 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.96 HN 1.13 KP 0.98 ! LA 0.88 MK 1.02 NL 1.15 OV 0.99 ! PT 0.92 SC 1.04 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.01 HN 0.99 KP 1.01 ! LA 0.86 MK 1.00 NL 1.19 OV 1.00 ! PT 0.91 SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 0.99 KP 0.98 ! LA 0.88 MK 1.06 NL 1.18 OV 1.00 ! PT 0.93 SC 0.98 ! ! ! Fit before self-cal, rms=0.073953Jy sigma=1.368782 ! Fit after self-cal, rms=0.070898Jy sigma=1.267647 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8622 mas, bmaj=2.004 mas, bpa=-2.159 degrees ! Estimated noise=0.258107 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00693471 Jy ! Component: 100 - total flux cleaned = 0.0115204 Jy ! Component: 150 - total flux cleaned = 0.0148399 Jy ! Component: 200 - total flux cleaned = 0.0166098 Jy ! Total flux subtracted in 200 components = 0.0166098 Jy ! Clean residual min=-0.003404 max=0.004135 Jy/beam ! Clean residual mean=0.000002 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.407235 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 247 components and 0.407235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070085Jy sigma=1.245621 ! Fit after self-cal, rms=0.070112Jy sigma=1.243507 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070112Jy sigma=1.243507 ! Fit after self-cal, rms=0.070965Jy sigma=1.229888 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8584 mas, bmaj=2.004 mas, bpa=-2.206 degrees ! Estimated noise=0.256065 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307894 Jy ! Component: 100 - total flux cleaned = 0.00498874 Jy ! Component: 150 - total flux cleaned = 0.00664925 Jy ! Component: 200 - total flux cleaned = 0.00804731 Jy ! Total flux subtracted in 200 components = 0.00804731 Jy ! Clean residual min=-0.002354 max=0.003196 Jy/beam ! Clean residual mean=0.000001 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.415282 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 272 components and 0.415282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070701Jy sigma=1.222425 ! Fit after self-cal, rms=0.070701Jy sigma=1.221934 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00278182 Jy ! Component: 100 - total flux cleaned = 0.0038599 Jy ! Component: 150 - total flux cleaned = 0.00438105 Jy ! Component: 200 - total flux cleaned = 0.00479917 Jy ! Total flux subtracted in 200 components = 0.00479917 Jy ! Clean residual min=-0.002244 max=0.002641 Jy/beam ! Clean residual mean=0.000001 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.420081 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 291 components and 0.420081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070553Jy sigma=1.218372 ! Fit after self-cal, rms=0.070541Jy sigma=1.218218 ! Inverting map ! Added new window around map position (-6.4, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223117 Jy ! Component: 100 - total flux cleaned = 0.00362093 Jy ! Component: 150 - total flux cleaned = 0.00451087 Jy ! Component: 200 - total flux cleaned = 0.00501104 Jy ! Total flux subtracted in 200 components = 0.00501104 Jy ! Clean residual min=-0.002253 max=0.001961 Jy/beam ! Clean residual mean=0.000001 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.425092 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 308 components and 0.425092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070448Jy sigma=1.215657 ! Fit after self-cal, rms=0.070437Jy sigma=1.215554 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070437Jy sigma=1.215554 ! Fit after self-cal, rms=0.070295Jy sigma=1.213022 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8551 mas, bmaj=2.002 mas, bpa=-2.306 degrees ! Estimated noise=0.253793 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162056 Jy ! Component: 100 - total flux cleaned = 0.00270051 Jy ! Component: 150 - total flux cleaned = 0.00334778 Jy ! Component: 200 - total flux cleaned = 0.00401925 Jy ! Total flux subtracted in 200 components = 0.00401925 Jy ! Clean residual min=-0.001921 max=0.001738 Jy/beam ! Clean residual mean=0.000001 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.429112 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 316 components and 0.429112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070229Jy sigma=1.211128 ! Fit after self-cal, rms=0.070230Jy sigma=1.211080 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000522319 Jy ! Component: 100 - total flux cleaned = 0.000887897 Jy ! Component: 150 - total flux cleaned = 0.00116456 Jy ! Component: 200 - total flux cleaned = 0.00146154 Jy ! Total flux subtracted in 200 components = 0.00146154 Jy ! Clean residual min=-0.001856 max=0.001662 Jy/beam ! Clean residual mean=0.000001 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.430573 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 323 components and 0.430573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070198Jy sigma=1.210286 ! Fit after self-cal, rms=0.070195Jy sigma=1.210274 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070195Jy sigma=1.210274 ! Fit after self-cal, rms=0.070064Jy sigma=1.209893 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.123 mas, bmaj=3.426 mas, bpa=1.392 degrees ! Estimated noise=0.326245 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225564 Jy ! Component: 100 - total flux cleaned = 0.00315754 Jy ! Component: 150 - total flux cleaned = 0.00366549 Jy ! Component: 200 - total flux cleaned = 0.00395011 Jy ! Total flux subtracted in 200 components = 0.00395011 Jy ! Clean residual min=-0.001808 max=0.001718 Jy/beam ! Clean residual mean=0.000001 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.434523 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 335 components and 0.434523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070054Jy sigma=1.209453 ! Fit after self-cal, rms=0.070047Jy sigma=1.209371 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.41846e-05 Jy ! Component: 100 - total flux cleaned = 0.000136898 Jy ! Component: 150 - total flux cleaned = 0.000109855 Jy ! Component: 200 - total flux cleaned = 5.9557e-05 Jy ! Total flux subtracted in 200 components = 5.9557e-05 Jy ! Clean residual min=-0.001723 max=0.001646 Jy/beam ! Clean residual mean=0.000001 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.434583 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 351 components and 0.434583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070050Jy sigma=1.209514 ! Fit after self-cal, rms=0.070050Jy sigma=1.209493 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8537 mas, bmaj=2.001 mas, bpa=-2.315 degrees ! Estimated noise=0.253076 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8537 x 2.001 at -2.315 degrees (North through East) ! Clean map min=-0.0016646 max=0.12375 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6919 mas, bmaj=1.721 mas, bpa=-1.957 degrees ! Estimated noise=0.365776 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0965071 Jy ! Component: 100 - total flux cleaned = 0.141805 Jy ! Component: 150 - total flux cleaned = 0.17482 Jy ! Component: 200 - total flux cleaned = 0.200667 Jy ! Total flux subtracted in 200 components = 0.200667 Jy ! Clean residual min=-0.008259 max=0.015213 Jy/beam ! Clean residual mean=-0.000002 rms=0.002242 Jy/beam ! Combined flux in latest and established models = 0.200667 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.200667 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8537 mas, bmaj=2.001 mas, bpa=-2.315 degrees ! Estimated noise=0.253076 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0414661 Jy ! Component: 100 - total flux cleaned = 0.0712159 Jy ! Component: 150 - total flux cleaned = 0.0937791 Jy ! Component: 200 - total flux cleaned = 0.111764 Jy ! Total flux subtracted in 200 components = 0.111764 Jy ! Clean residual min=-0.006586 max=0.010885 Jy/beam ! Clean residual mean=-0.000000 rms=0.002173 Jy/beam ! Combined flux in latest and established models = 0.312431 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 101 components and 0.312431 Jy ! Inverting map ! Added new window around map position (-0.4, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148225 Jy ! Component: 100 - total flux cleaned = 0.0271781 Jy ! Component: 150 - total flux cleaned = 0.0376122 Jy ! Component: 200 - total flux cleaned = 0.0465171 Jy ! Total flux subtracted in 200 components = 0.0465171 Jy ! Clean residual min=-0.003890 max=0.005491 Jy/beam ! Clean residual mean=-0.000000 rms=0.001287 Jy/beam ! Combined flux in latest and established models = 0.358948 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 155 components and 0.358948 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00767732 Jy ! Component: 100 - total flux cleaned = 0.0143605 Jy ! Component: 150 - total flux cleaned = 0.0202131 Jy ! Component: 200 - total flux cleaned = 0.0253559 Jy ! Total flux subtracted in 200 components = 0.0253559 Jy ! Clean residual min=-0.002855 max=0.003631 Jy/beam ! Clean residual mean=0.000000 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.384304 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 217 components and 0.384304 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.123 mas, bmaj=3.426 mas, bpa=1.392 degrees ! Estimated noise=0.326245 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00927038 Jy ! Component: 100 - total flux cleaned = 0.0162832 Jy ! Component: 150 - total flux cleaned = 0.021797 Jy ! Component: 200 - total flux cleaned = 0.0263076 Jy ! Total flux subtracted in 200 components = 0.0263076 Jy ! Clean residual min=-0.003222 max=0.003359 Jy/beam ! Clean residual mean=0.000000 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.410612 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378825 Jy ! Component: 100 - total flux cleaned = 0.00698135 Jy ! Component: 150 - total flux cleaned = 0.00969859 Jy ! Component: 200 - total flux cleaned = 0.0120376 Jy ! Total flux subtracted in 200 components = 0.0120376 Jy ! Clean residual min=-0.002357 max=0.002315 Jy/beam ! Clean residual mean=0.000001 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.422649 Jy ! Adding 147 model components to the UV plane model. ! The established model now contains 327 components and 0.42265 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8537 mas, bmaj=2.001 mas, bpa=-2.315 degrees ! Estimated noise=0.253076 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186474 Jy ! Component: 100 - total flux cleaned = 0.00320304 Jy ! Component: 150 - total flux cleaned = 0.00422619 Jy ! Component: 200 - total flux cleaned = 0.00515425 Jy ! Total flux subtracted in 200 components = 0.00515425 Jy ! Clean residual min=-0.001837 max=0.001701 Jy/beam ! Clean residual mean=0.000000 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.427804 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 354 components and 0.427804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070125Jy sigma=1.211300 ! Fit after self-cal, rms=0.070100Jy sigma=1.210770 wmodel J1546+0026_X_map.mod ! Writing 354 model components to file: J1546+0026_X_map.mod wobs J1546+0026_X_uvs.fits ! Writing UV FITS file: J1546+0026_X_uvs.fits wwins J1546+0026_X_map.win ! wwins: Wrote 11 windows to J1546+0026_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -1.2119e-05 Jy ! Component: 100 - total flux cleaned = -3.95632e-05 Jy ! Component: 150 - total flux cleaned = -0.000121666 Jy ! Component: 200 - total flux cleaned = -0.000201638 Jy ! Component: 250 - total flux cleaned = -0.000330283 Jy ! Component: 300 - total flux cleaned = -0.000255029 Jy ! Component: 350 - total flux cleaned = -0.00025492 Jy ! Component: 400 - total flux cleaned = -0.000326937 Jy ! Component: 450 - total flux cleaned = -0.000444751 Jy ! Component: 500 - total flux cleaned = -0.000467618 Jy ! Component: 550 - total flux cleaned = -0.00051256 Jy ! Component: 600 - total flux cleaned = -0.000490234 Jy ! Component: 650 - total flux cleaned = -0.000512451 Jy ! Component: 700 - total flux cleaned = -0.000556023 Jy ! Component: 750 - total flux cleaned = -0.000534696 Jy ! Component: 800 - total flux cleaned = -0.00053464 Jy ! Component: 850 - total flux cleaned = -0.000513918 Jy ! Component: 900 - total flux cleaned = -0.000534593 Jy ! Component: 950 - total flux cleaned = -0.000554946 Jy ! Component: 1000 - total flux cleaned = -0.000574899 Jy ! Component: 1050 - total flux cleaned = -0.000574826 Jy ! Component: 1100 - total flux cleaned = -0.000633455 Jy ! Component: 1150 - total flux cleaned = -0.000652818 Jy ! Component: 1200 - total flux cleaned = -0.000672113 Jy ! Component: 1250 - total flux cleaned = -0.000691272 Jy ! Component: 1300 - total flux cleaned = -0.000784591 Jy ! Component: 1350 - total flux cleaned = -0.000803032 Jy ! Component: 1400 - total flux cleaned = -0.000857686 Jy ! Component: 1450 - total flux cleaned = -0.000947606 Jy ! Component: 1500 - total flux cleaned = -0.000947255 Jy ! Component: 1550 - total flux cleaned = -0.000999919 Jy ! Component: 1600 - total flux cleaned = -0.00103487 Jy ! Component: 1650 - total flux cleaned = -0.00106973 Jy ! Component: 1700 - total flux cleaned = -0.00115542 Jy ! Component: 1750 - total flux cleaned = -0.00117243 Jy ! Component: 1800 - total flux cleaned = -0.00125626 Jy ! Component: 1850 - total flux cleaned = -0.00128973 Jy ! Component: 1900 - total flux cleaned = -0.00133924 Jy ! Component: 1950 - total flux cleaned = -0.00137201 Jy ! Component: 2000 - total flux cleaned = -0.00150143 Jy ! Component: 2050 - total flux cleaned = -0.00151731 Jy ! Component: 2100 - total flux cleaned = -0.00158117 Jy ! Component: 2150 - total flux cleaned = -0.00158088 Jy ! Component: 2200 - total flux cleaned = -0.00165937 Jy ! Component: 2250 - total flux cleaned = -0.00176848 Jy ! Component: 2300 - total flux cleaned = -0.00179925 Jy ! Component: 2350 - total flux cleaned = -0.00192194 Jy ! Component: 2400 - total flux cleaned = -0.00195227 Jy ! Component: 2450 - total flux cleaned = -0.00201243 Jy ! Component: 2500 - total flux cleaned = -0.00202724 Jy ! Component: 2550 - total flux cleaned = -0.00208688 Jy ! Component: 2600 - total flux cleaned = -0.00219038 Jy ! Component: 2650 - total flux cleaned = -0.00219016 Jy ! Component: 2700 - total flux cleaned = -0.00220464 Jy ! Component: 2750 - total flux cleaned = -0.00230599 Jy ! Component: 2800 - total flux cleaned = -0.00239209 Jy ! Component: 2850 - total flux cleaned = -0.00234928 Jy ! Component: 2900 - total flux cleaned = -0.00234927 Jy ! Component: 2950 - total flux cleaned = -0.00240551 Jy ! Component: 3000 - total flux cleaned = -0.00244753 Jy ! Component: 3050 - total flux cleaned = -0.00250314 Jy ! Component: 3100 - total flux cleaned = -0.00246174 Jy ! Component: 3150 - total flux cleaned = -0.00248924 Jy ! Component: 3200 - total flux cleaned = -0.00253014 Jy ! Component: 3250 - total flux cleaned = -0.00251667 Jy ! Component: 3300 - total flux cleaned = -0.0025437 Jy ! Component: 3350 - total flux cleaned = -0.00251694 Jy ! Component: 3400 - total flux cleaned = -0.00255693 Jy ! Component: 3450 - total flux cleaned = -0.00250409 Jy ! Component: 3500 - total flux cleaned = -0.00249113 Jy ! Component: 3550 - total flux cleaned = -0.00255642 Jy ! Component: 3600 - total flux cleaned = -0.00254358 Jy ! Component: 3650 - total flux cleaned = -0.00253061 Jy ! Component: 3700 - total flux cleaned = -0.00253058 Jy ! Component: 3750 - total flux cleaned = -0.00259432 Jy ! Component: 3800 - total flux cleaned = -0.0025943 Jy ! Component: 3850 - total flux cleaned = -0.00261941 Jy ! Component: 3900 - total flux cleaned = -0.00251917 Jy ! Component: 3950 - total flux cleaned = -0.00260651 Jy ! Component: 4000 - total flux cleaned = -0.00263137 Jy ! Component: 4050 - total flux cleaned = -0.00260662 Jy ! Total flux subtracted in 4096 components = -0.00268026 Jy ! Clean residual min=-0.000635 max=0.000697 Jy/beam ! Clean residual mean=0.000000 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.425124 Jy keep ! Adding 313 model components to the UV plane model. ! The established model now contains 667 components and 0.425124 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1546+0026_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8537 x 2.001 at -2.315 degrees (North through East) ! Clean map min=-0.0014491 max=0.12599 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1546+0026_X_map.fits wmodel /vlbi/uf001/uva//J1546+0026_X_map.mod ! Writing 667 model components to file: /vlbi/uf001/uva//J1546+0026_X_map.mod wobs /vlbi/uf001/uva//J1546+0026_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1546+0026_X_uvs.fits wwins /vlbi/uf001/uva//J1546+0026_X_map.win ! wwins: Wrote 12 windows to /vlbi/uf001/uva//J1546+0026_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.125986 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000217729 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.518461 0.518461 1.03692 2.07385 4.14769 8.29538 16.5908 33.1815 66.3631 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.125 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 578.635 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1546+0026_X_dfm.log closed on Mon Jan 14 03:27:09 2019