! Started logfile: /vlbi/uf001/uva//J1545+5400_S_dfm.log on Mon Jan 14 03:26:46 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1545+5400_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1545+5400_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.850292 visibilities/baseline/integration-bin.
! Found source: J1545+5400
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 6543 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1545+5400_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 76 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 76 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 76 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010417Jy  sigma=23.451859
! Fit after  self-cal, rms=0.797188Jy  sigma=18.507263
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.723 mas, bmaj=4.268 mas, bpa=-25.59 degrees
! Estimated noise=0.595585 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.158994 Jy
! Component: 100  -  total flux cleaned = 0.193681 Jy
! Total flux subtracted in 100 components = 0.193681 Jy
! Clean residual min=-0.005339 max=0.009747 Jy/beam
! Clean residual mean=-0.000005 rms=0.001389 Jy/beam
! Combined flux in latest and established models = 0.193681 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.193681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060685Jy  sigma=1.318312
! Fit after  self-cal, rms=0.060678Jy  sigma=1.318191
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00922365 Jy
! Component: 100  -  total flux cleaned = 0.0138363 Jy
! Total flux subtracted in 100 components = 0.0138363 Jy
! Clean residual min=-0.005401 max=0.008143 Jy/beam
! Clean residual mean=-0.000001 rms=0.001169 Jy/beam
! Combined flux in latest and established models = 0.207517 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 19 components and 0.207517 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059170Jy  sigma=1.283354
! Fit after  self-cal, rms=0.059160Jy  sigma=1.283016
! Inverting map 
! Added new window around map position (8.5, -1.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0065752 Jy
! Component: 100  -  total flux cleaned = 0.00969253 Jy
! Total flux subtracted in 100 components = 0.00969253 Jy
! Clean residual min=-0.004867 max=0.004194 Jy/beam
! Clean residual mean=0.000001 rms=0.001030 Jy/beam
! Combined flux in latest and established models = 0.217209 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 27 components and 0.217209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058486Jy  sigma=1.267498
! Fit after  self-cal, rms=0.058445Jy  sigma=1.266426
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.207 mas, bmaj=5.036 mas, bpa=-26.64 degrees
! Estimated noise=0.399414 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00276105 Jy
! Component: 100  -  total flux cleaned = 0.00426581 Jy
! Component: 150  -  total flux cleaned = 0.00496454 Jy
! Component: 200  -  total flux cleaned = 0.00553865 Jy
! Total flux subtracted in 200 components = 0.00553865 Jy
! Clean residual min=-0.003539 max=0.003296 Jy/beam
! Clean residual mean=0.000010 rms=0.000812 Jy/beam
! Combined flux in latest and established models = 0.222748 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 38 components and 0.222748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058272Jy  sigma=1.262556
! Fit after  self-cal, rms=0.058266Jy  sigma=1.262394
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.207 x 5.036 at -26.64 degrees (North through East)
! Clean map  min=-0.0034512  max=0.20324 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.03     KP        1.04     
!   LA        0.93     MK        1.00     NL        0.99     OV        1.00     
!   PT        1.03     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.00     KP        1.00     
!   LA        0.96     MK        1.05     NL        0.96     OV        1.08     
!   PT        1.02     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.02     KP        1.03     
!   LA        0.96     MK        1.05     NL        0.95     OV        1.00     
!   PT        1.01     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.058266Jy  sigma=1.262394
! Fit after  self-cal, rms=0.057670Jy  sigma=1.243126
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.234 mas, bmaj=5.052 mas, bpa=-25.9 degrees
! Estimated noise=0.400859 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000724748 Jy
! Component: 100  -  total flux cleaned = 0.000697161 Jy
! Component: 150  -  total flux cleaned = 0.000719726 Jy
! Component: 200  -  total flux cleaned = 0.000740062 Jy
! Total flux subtracted in 200 components = 0.000740062 Jy
! Clean residual min=-0.002292 max=0.002453 Jy/beam
! Clean residual mean=0.000016 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 0.223488 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 53 components and 0.223488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057637Jy  sigma=1.242439
! Fit after  self-cal, rms=0.057649Jy  sigma=1.242320
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057649Jy  sigma=1.242320
! Fit after  self-cal, rms=0.056840Jy  sigma=1.225309
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.236 mas, bmaj=5.047 mas, bpa=-25.72 degrees
! Estimated noise=0.400656 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000727568 Jy
! Component: 100  -  total flux cleaned = -0.000877934 Jy
! Component: 150  -  total flux cleaned = -0.000940306 Jy
! Component: 200  -  total flux cleaned = -0.000926647 Jy
! Total flux subtracted in 200 components = -0.000926647 Jy
! Clean residual min=-0.001597 max=0.001808 Jy/beam
! Clean residual mean=0.000013 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.222561 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 61 components and 0.222561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056823Jy  sigma=1.225063
! Fit after  self-cal, rms=0.056819Jy  sigma=1.224990
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.33959e-05 Jy
! Component: 100  -  total flux cleaned = -7.04542e-05 Jy
! Component: 150  -  total flux cleaned = -7.0366e-05 Jy
! Component: 200  -  total flux cleaned = -5.96875e-05 Jy
! Total flux subtracted in 200 components = -5.96875e-05 Jy
! Clean residual min=-0.001589 max=0.001795 Jy/beam
! Clean residual mean=0.000013 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.222502 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 70 components and 0.222502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056814Jy  sigma=1.224892
! Fit after  self-cal, rms=0.056813Jy  sigma=1.224886
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056813Jy  sigma=1.224886
! Fit after  self-cal, rms=0.056796Jy  sigma=1.224846
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.236 mas, bmaj=5.051 mas, bpa=-25.8 degrees
! Estimated noise=0.400526 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000407362 Jy
! Component: 100  -  total flux cleaned = -0.000443694 Jy
! Component: 150  -  total flux cleaned = -0.000443999 Jy
! Component: 200  -  total flux cleaned = -0.000434108 Jy
! Total flux subtracted in 200 components = -0.000434108 Jy
! Clean residual min=-0.001605 max=0.001787 Jy/beam
! Clean residual mean=0.000013 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.222068 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 73 components and 0.222068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056791Jy  sigma=1.224743
! Fit after  self-cal, rms=0.056791Jy  sigma=1.224734
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.91448e-05 Jy
! Component: 100  -  total flux cleaned = -4.87294e-05 Jy
! Component: 150  -  total flux cleaned = -3.93127e-05 Jy
! Component: 200  -  total flux cleaned = -3.04722e-05 Jy
! Total flux subtracted in 200 components = -3.04722e-05 Jy
! Clean residual min=-0.001598 max=0.001776 Jy/beam
! Clean residual mean=0.000013 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.222037 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 76 components and 0.222037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056788Jy  sigma=1.224673
! Fit after  self-cal, rms=0.056787Jy  sigma=1.224668
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056787Jy  sigma=1.224668
! Fit after  self-cal, rms=0.056786Jy  sigma=1.224656
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.964 mas, bmaj=8.432 mas, bpa=-18.39 degrees
! Estimated noise=0.487178 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.28578e-05 Jy
! Component: 100  -  total flux cleaned = -0.000112873 Jy
! Component: 150  -  total flux cleaned = -0.000152147 Jy
! Component: 200  -  total flux cleaned = -0.000186822 Jy
! Total flux subtracted in 200 components = -0.000186822 Jy
! Clean residual min=-0.001528 max=0.001620 Jy/beam
! Clean residual mean=0.000030 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.22185 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 88 components and 0.22185 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056786Jy  sigma=1.224655
! Fit after  self-cal, rms=0.056786Jy  sigma=1.224648
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.50202e-06 Jy
! Component: 100  -  total flux cleaned = -8.95468e-06 Jy
! Component: 150  -  total flux cleaned = -2.02182e-05 Jy
! Component: 200  -  total flux cleaned = -3.04796e-05 Jy
! Total flux subtracted in 200 components = -3.04796e-05 Jy
! Clean residual min=-0.001546 max=0.001612 Jy/beam
! Clean residual mean=0.000030 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.22182 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 91 components and 0.22182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056787Jy  sigma=1.224665
! Fit after  self-cal, rms=0.056787Jy  sigma=1.224660
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.236 mas, bmaj=5.054 mas, bpa=-25.85 degrees
! Estimated noise=0.400446 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.236 x 5.054 at -25.85 degrees (North through East)
! Clean map  min=-0.0015846  max=0.20382 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.741 mas, bmaj=4.281 mas, bpa=-24.84 degrees
! Estimated noise=0.599479 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.160002 Jy
! Component: 100  -  total flux cleaned = 0.194992 Jy
! Component: 150  -  total flux cleaned = 0.205216 Jy
! Component: 200  -  total flux cleaned = 0.210858 Jy
! Total flux subtracted in 200 components = 0.210858 Jy
! Clean residual min=-0.003170 max=0.003263 Jy/beam
! Clean residual mean=0.000004 rms=0.000794 Jy/beam
! Combined flux in latest and established models = 0.210858 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.210858 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.236 mas, bmaj=5.054 mas, bpa=-25.85 degrees
! Estimated noise=0.400446 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00387725 Jy
! Component: 100  -  total flux cleaned = 0.00630713 Jy
! Component: 150  -  total flux cleaned = 0.00798664 Jy
! Component: 200  -  total flux cleaned = 0.00916428 Jy
! Total flux subtracted in 200 components = 0.00916428 Jy
! Clean residual min=-0.001671 max=0.001767 Jy/beam
! Clean residual mean=0.000013 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.220022 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 40 components and 0.220022 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.964 mas, bmaj=8.432 mas, bpa=-18.39 degrees
! Estimated noise=0.487178 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101762 Jy
! Component: 100  -  total flux cleaned = 0.00155522 Jy
! Component: 150  -  total flux cleaned = 0.00174372 Jy
! Component: 200  -  total flux cleaned = 0.00178431 Jy
! Total flux subtracted in 200 components = 0.00178431 Jy
! Clean residual min=-0.001525 max=0.001585 Jy/beam
! Clean residual mean=0.000030 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.221807 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.94408e-06 Jy
! Component: 100  -  total flux cleaned = 2.49498e-05 Jy
! Component: 150  -  total flux cleaned = 3.94089e-05 Jy
! Component: 200  -  total flux cleaned = 4.59461e-05 Jy
! Total flux subtracted in 200 components = 4.59461e-05 Jy
! Clean residual min=-0.001530 max=0.001596 Jy/beam
! Clean residual mean=0.000030 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.221853 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 62 components and 0.221852 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.236 mas, bmaj=5.054 mas, bpa=-25.85 degrees
! Estimated noise=0.400446 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.30445e-05 Jy
! Component: 100  -  total flux cleaned = 2.23445e-05 Jy
! Component: 150  -  total flux cleaned = 6.23505e-05 Jy
! Component: 200  -  total flux cleaned = 0.000116777 Jy
! Total flux subtracted in 200 components = 0.000116777 Jy
! Clean residual min=-0.001574 max=0.001826 Jy/beam
! Clean residual mean=0.000014 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.221969 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 76 components and 0.221969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056815Jy  sigma=1.225091
! Fit after  self-cal, rms=0.056812Jy  sigma=1.225069
wmodel J1545+5400_S_map.mod
! Writing 76 model components to file: J1545+5400_S_map.mod
wobs   J1545+5400_S_uvs.fits
! Writing UV FITS file: J1545+5400_S_uvs.fits
wwins  J1545+5400_S_map.win
! wwins: Wrote 2 windows to J1545+5400_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000730029 Jy
! Component: 100  -  total flux cleaned = 0.00120716 Jy
! Component: 150  -  total flux cleaned = 0.00143533 Jy
! Component: 200  -  total flux cleaned = 0.00154398 Jy
! Component: 250  -  total flux cleaned = 0.00156989 Jy
! Component: 300  -  total flux cleaned = 0.00156918 Jy
! Component: 350  -  total flux cleaned = 0.00154403 Jy
! Component: 400  -  total flux cleaned = 0.00147185 Jy
! Component: 450  -  total flux cleaned = 0.00142493 Jy
! Component: 500  -  total flux cleaned = 0.0013324 Jy
! Component: 550  -  total flux cleaned = 0.00128671 Jy
! Component: 600  -  total flux cleaned = 0.00121999 Jy
! Component: 650  -  total flux cleaned = 0.00119811 Jy
! Component: 700  -  total flux cleaned = 0.00111186 Jy
! Component: 750  -  total flux cleaned = 0.00104806 Jy
! Component: 800  -  total flux cleaned = 0.00111114 Jy
! Component: 850  -  total flux cleaned = 0.00111152 Jy
! Component: 900  -  total flux cleaned = 0.0011726 Jy
! Component: 950  -  total flux cleaned = 0.00115201 Jy
! Component: 1000  -  total flux cleaned = 0.00113207 Jy
! Component: 1050  -  total flux cleaned = 0.0011518 Jy
! Component: 1100  -  total flux cleaned = 0.00107469 Jy
! Component: 1150  -  total flux cleaned = 0.00105595 Jy
! Component: 1200  -  total flux cleaned = 0.00105614 Jy
! Component: 1250  -  total flux cleaned = 0.00103751 Jy
! Component: 1300  -  total flux cleaned = 0.00111109 Jy
! Component: 1350  -  total flux cleaned = 0.00105647 Jy
! Component: 1400  -  total flux cleaned = 0.00103864 Jy
! Component: 1450  -  total flux cleaned = 0.00102075 Jy
! Component: 1500  -  total flux cleaned = 0.00102055 Jy
! Component: 1550  -  total flux cleaned = 0.00100336 Jy
! Component: 1600  -  total flux cleaned = 0.00103759 Jy
! Component: 1650  -  total flux cleaned = 0.00108867 Jy
! Component: 1700  -  total flux cleaned = 0.0011054 Jy
! Component: 1750  -  total flux cleaned = 0.00113893 Jy
! Component: 1800  -  total flux cleaned = 0.00115548 Jy
! Component: 1850  -  total flux cleaned = 0.00120465 Jy
! Component: 1900  -  total flux cleaned = 0.00123675 Jy
! Component: 1950  -  total flux cleaned = 0.00125292 Jy
! Component: 2000  -  total flux cleaned = 0.00133216 Jy
! Component: 2050  -  total flux cleaned = 0.00130073 Jy
! Component: 2100  -  total flux cleaned = 0.00133189 Jy
! Component: 2150  -  total flux cleaned = 0.00137831 Jy
! Component: 2200  -  total flux cleaned = 0.00139361 Jy
! Component: 2250  -  total flux cleaned = 0.001424 Jy
! Component: 2300  -  total flux cleaned = 0.00146914 Jy
! Component: 2350  -  total flux cleaned = 0.00151367 Jy
! Component: 2400  -  total flux cleaned = 0.00155783 Jy
! Component: 2450  -  total flux cleaned = 0.00154312 Jy
! Component: 2500  -  total flux cleaned = 0.00158665 Jy
! Component: 2550  -  total flux cleaned = 0.00161547 Jy
! Component: 2600  -  total flux cleaned = 0.00161542 Jy
! Component: 2650  -  total flux cleaned = 0.00161536 Jy
! Component: 2700  -  total flux cleaned = 0.00162927 Jy
! Component: 2750  -  total flux cleaned = 0.00162944 Jy
! Component: 2800  -  total flux cleaned = 0.00171232 Jy
! Component: 2850  -  total flux cleaned = 0.00172599 Jy
! Component: 2900  -  total flux cleaned = 0.00172588 Jy
! Component: 2950  -  total flux cleaned = 0.00165831 Jy
! Component: 3000  -  total flux cleaned = 0.00171191 Jy
! Component: 3050  -  total flux cleaned = 0.00173854 Jy
! Component: 3100  -  total flux cleaned = 0.00175158 Jy
! Component: 3150  -  total flux cleaned = 0.0017385 Jy
! Component: 3200  -  total flux cleaned = 0.00176455 Jy
! Component: 3250  -  total flux cleaned = 0.00173882 Jy
! Component: 3300  -  total flux cleaned = 0.00180296 Jy
! Component: 3350  -  total flux cleaned = 0.00182834 Jy
! Component: 3400  -  total flux cleaned = 0.00184108 Jy
! Component: 3450  -  total flux cleaned = 0.00182862 Jy
! Component: 3500  -  total flux cleaned = 0.00185359 Jy
! Component: 3550  -  total flux cleaned = 0.00189086 Jy
! Component: 3600  -  total flux cleaned = 0.0018172 Jy
! Component: 3650  -  total flux cleaned = 0.00189045 Jy
! Component: 3700  -  total flux cleaned = 0.00195099 Jy
! Component: 3750  -  total flux cleaned = 0.00195097 Jy
! Component: 3800  -  total flux cleaned = 0.00195113 Jy
! Component: 3850  -  total flux cleaned = 0.00198675 Jy
! Component: 3900  -  total flux cleaned = 0.00199855 Jy
! Component: 3950  -  total flux cleaned = 0.00201024 Jy
! Component: 4000  -  total flux cleaned = 0.00198697 Jy
! Component: 4050  -  total flux cleaned = 0.00195233 Jy
! Total flux subtracted in 4096 components = 0.00194091 Jy
! Clean residual min=-0.000830 max=0.000773 Jy/beam
! Clean residual mean=0.000004 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.22391 Jy
keep
! Adding 290 model components to the UV plane model.
! The established model now contains 366 components and 0.22391 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1545+5400_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.236 x 5.054 at -25.85 degrees (North through East)
! Clean map  min=-0.0011088  max=0.20409 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1545+5400_S_map.fits
wmodel /vlbi/uf001/uva//J1545+5400_S_map.mod
! Writing 366 model components to file: /vlbi/uf001/uva//J1545+5400_S_map.mod
wobs   /vlbi/uf001/uva//J1545+5400_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1545+5400_S_uvs.fits
wwins  /vlbi/uf001/uva//J1545+5400_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J1545+5400_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.204091 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000206224 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.303135 0.303135 0.60627 1.21254 2.42508 4.85016 9.70031 19.4006 38.8013 77.6025
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.204 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  989.658 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1545+5400_S_dfm.log closed on Mon Jan 14 03:26:50 2019