! Started logfile: /vlbi/uf001/uva//J1545+5135_X_dfm.log on Mon Jan 14 03:26:40 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J1545+5135_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1545+5135_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.835979 visibilities/baseline/integration-bin.
! Found source: J1545+5135
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 18960 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1545+5135_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015712Jy  sigma=23.236180
! Fit after  self-cal, rms=0.827719Jy  sigma=18.854817
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9123 mas, bmaj=1.033 mas, bpa=-25.07 degrees
! Estimated noise=0.438621 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.12823 Jy
! Component: 100  -  total flux cleaned = 0.162361 Jy
! Total flux subtracted in 100 components = 0.162361 Jy
! Clean residual min=-0.008393 max=0.017993 Jy/beam
! Clean residual mean=0.000099 rms=0.001957 Jy/beam
! Combined flux in latest and established models = 0.162361 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.162361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074301Jy  sigma=1.647092
! Fit after  self-cal, rms=0.074297Jy  sigma=1.646494
! Inverting map 
! Added new window around map position (-0.2, -2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0191347 Jy
! Component: 100  -  total flux cleaned = 0.0315632 Jy
! Total flux subtracted in 100 components = 0.0315632 Jy
! Clean residual min=-0.006371 max=0.009211 Jy/beam
! Clean residual mean=0.000082 rms=0.001498 Jy/beam
! Combined flux in latest and established models = 0.193924 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 21 components and 0.193924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066865Jy  sigma=1.463630
! Fit after  self-cal, rms=0.066644Jy  sigma=1.458697
! Inverting map 
! Added new window around map position (-0.4, -4.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105279 Jy
! Component: 100  -  total flux cleaned = 0.0182469 Jy
! Total flux subtracted in 100 components = 0.0182469 Jy
! Clean residual min=-0.005833 max=0.005601 Jy/beam
! Clean residual mean=0.000072 rms=0.001285 Jy/beam
! Combined flux in latest and established models = 0.212171 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 37 components and 0.212171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064038Jy  sigma=1.393516
! Fit after  self-cal, rms=0.063913Jy  sigma=1.390881
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.152 mas, bmaj=1.276 mas, bpa=-15.94 degrees
! Estimated noise=0.247884 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104981 Jy
! Component: 100  -  total flux cleaned = 0.0181613 Jy
! Component: 150  -  total flux cleaned = 0.024166 Jy
! Component: 200  -  total flux cleaned = 0.0289708 Jy
! Total flux subtracted in 200 components = 0.0289708 Jy
! Clean residual min=-0.006688 max=0.005713 Jy/beam
! Clean residual mean=0.000093 rms=0.001370 Jy/beam
! Combined flux in latest and established models = 0.241141 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 77 components and 0.241141 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061621Jy  sigma=1.330489
! Fit after  self-cal, rms=0.061491Jy  sigma=1.327631
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.152 x 1.276 at -15.94 degrees (North through East)
! Clean map  min=-0.0059208  max=0.1691 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        1.07     HN        1.01     KP        1.05     
!   LA        0.83     MK        1.06     NL        0.99     OV        0.96     
!   PT        0.92     SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        1.09     HN        1.01     KP        1.09     
!   LA        0.83     MK        1.05     NL        1.00     OV        0.95     
!   PT        0.92     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.07     HN        1.02     KP        1.06     
!   LA        0.84     MK        1.02     NL        1.00     OV        0.95     
!   PT        0.90     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.05     HN        1.03     KP        1.10     
!   LA        0.84     MK        1.03     NL        1.01     OV        0.95     
!   PT        0.92     SC        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        1.09     HN        1.01     KP        1.08     
!   LA        0.83     MK        1.03     NL        1.00     OV        0.96     
!   PT        0.86     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        1.07     HN        1.02     KP        1.07     
!   LA        0.82     MK        1.04     NL        1.00     OV        0.96     
!   PT        0.93     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        1.03     HN        1.04     KP        1.09     
!   LA        0.85     MK        1.08     NL        0.99     OV        0.96     
!   PT        0.92     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        1.08     HN        1.03     KP        1.06     
!   LA        0.84     MK        1.04     NL        1.01     OV        0.96     
!   PT        0.93     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        1.06     HN        1.04     KP        1.08     
!   LA        0.85     MK        1.05     NL        0.99     OV        0.99     
!   PT        0.93     SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        1.09     HN        1.00     KP        1.10     
!   LA        0.81     MK        1.07     NL        1.00     OV        0.96     
!   PT        0.91     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        1.07     HN        1.03     KP        1.06     
!   LA        0.85     MK        1.05     NL        1.00     OV        0.97     
!   PT        0.91     SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        1.04     HN        1.03     KP        1.09     
!   LA        0.85     MK        1.04     NL        0.99     OV        0.98     
!   PT        0.94     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.061491Jy  sigma=1.327631
! Fit after  self-cal, rms=0.057532Jy  sigma=1.221359
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.162 mas, bmaj=1.29 mas, bpa=-13.9 degrees
! Estimated noise=0.247037 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139822 Jy
! Component: 100  -  total flux cleaned = 0.00164647 Jy
! Component: 150  -  total flux cleaned = 0.00169054 Jy
! Component: 200  -  total flux cleaned = 0.00176724 Jy
! Total flux subtracted in 200 components = 0.00176724 Jy
! Clean residual min=-0.002329 max=0.001794 Jy/beam
! Clean residual mean=0.000034 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.242909 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 91 components and 0.242909 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057421Jy  sigma=1.218540
! Fit after  self-cal, rms=0.057509Jy  sigma=1.217666
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057509Jy  sigma=1.217666
! Fit after  self-cal, rms=0.057344Jy  sigma=1.209406
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.164 mas, bmaj=1.286 mas, bpa=-13.79 degrees
! Estimated noise=0.246697 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.66346e-05 Jy
! Component: 100  -  total flux cleaned = -5.29716e-05 Jy
! Component: 150  -  total flux cleaned = 3.20701e-06 Jy
! Component: 200  -  total flux cleaned = 5.43337e-05 Jy
! Total flux subtracted in 200 components = 5.43337e-05 Jy
! Clean residual min=-0.001907 max=0.001712 Jy/beam
! Clean residual mean=0.000019 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.242963 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 96 components and 0.242963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057312Jy  sigma=1.208695
! Fit after  self-cal, rms=0.057317Jy  sigma=1.208622
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.39029e-05 Jy
! Component: 100  -  total flux cleaned = 3.76503e-05 Jy
! Component: 150  -  total flux cleaned = 8.16202e-05 Jy
! Component: 200  -  total flux cleaned = 0.000142273 Jy
! Total flux subtracted in 200 components = 0.000142273 Jy
! Clean residual min=-0.001851 max=0.001692 Jy/beam
! Clean residual mean=0.000019 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.243105 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 97 components and 0.243105 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057300Jy  sigma=1.208264
! Fit after  self-cal, rms=0.057297Jy  sigma=1.208244
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057297Jy  sigma=1.208244
! Fit after  self-cal, rms=0.057315Jy  sigma=1.208188
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.164 mas, bmaj=1.285 mas, bpa=-13.5 degrees
! Estimated noise=0.246601 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00013856 Jy
! Component: 100  -  total flux cleaned = -0.000139398 Jy
! Component: 150  -  total flux cleaned = -0.000119802 Jy
! Component: 200  -  total flux cleaned = -8.3109e-05 Jy
! Total flux subtracted in 200 components = -8.3109e-05 Jy
! Clean residual min=-0.001799 max=0.001693 Jy/beam
! Clean residual mean=0.000018 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.243022 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 99 components and 0.243022 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057301Jy  sigma=1.207892
! Fit after  self-cal, rms=0.057300Jy  sigma=1.207871
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.0793e-05 Jy
! Component: 100  -  total flux cleaned = -1.36519e-05 Jy
! Component: 150  -  total flux cleaned = 1.87415e-05 Jy
! Component: 200  -  total flux cleaned = 3.41122e-05 Jy
! Total flux subtracted in 200 components = 3.41122e-05 Jy
! Clean residual min=-0.001751 max=0.001687 Jy/beam
! Clean residual mean=0.000018 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.243056 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 99 components and 0.243056 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057291Jy  sigma=1.207673
! Fit after  self-cal, rms=0.057290Jy  sigma=1.207664
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057290Jy  sigma=1.207664
! Fit after  self-cal, rms=0.057313Jy  sigma=1.207630
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.305 mas, bmaj=2.361 mas, bpa=11.05 degrees
! Estimated noise=0.297707 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000274008 Jy
! Component: 100  -  total flux cleaned = 0.000261339 Jy
! Component: 150  -  total flux cleaned = 0.000250556 Jy
! Component: 200  -  total flux cleaned = 0.000251158 Jy
! Total flux subtracted in 200 components = 0.000251158 Jy
! Clean residual min=-0.001855 max=0.002705 Jy/beam
! Clean residual mean=0.000039 rms=0.000557 Jy/beam
! Combined flux in latest and established models = 0.243308 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 104 components and 0.243308 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057315Jy  sigma=1.207672
! Fit after  self-cal, rms=0.057315Jy  sigma=1.207658
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5, -26.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0025112 Jy
! Component: 100  -  total flux cleaned = 0.00405844 Jy
! Component: 150  -  total flux cleaned = 0.00522919 Jy
! Component: 200  -  total flux cleaned = 0.00589704 Jy
! Total flux subtracted in 200 components = 0.00589704 Jy
! Clean residual min=-0.001475 max=0.001654 Jy/beam
! Clean residual mean=0.000027 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.249205 Jy
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 163 components and 0.249205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057251Jy  sigma=1.205990
! Fit after  self-cal, rms=0.057242Jy  sigma=1.205814
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.165 mas, bmaj=1.284 mas, bpa=-13.2 degrees
! Estimated noise=0.246615 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.165 x 1.284 at -13.2 degrees (North through East)
! Clean map  min=-0.0013703  max=0.16819 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9199 mas, bmaj=1.036 mas, bpa=-24.09 degrees
! Estimated noise=0.440641 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.128534 Jy
! Component: 100  -  total flux cleaned = 0.162746 Jy
! Component: 150  -  total flux cleaned = 0.181375 Jy
! Component: 200  -  total flux cleaned = 0.194286 Jy
! Total flux subtracted in 200 components = 0.194286 Jy
! Clean residual min=-0.003561 max=0.007302 Jy/beam
! Clean residual mean=0.000046 rms=0.001004 Jy/beam
! Combined flux in latest and established models = 0.194286 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.194286 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.165 mas, bmaj=1.284 mas, bpa=-13.2 degrees
! Estimated noise=0.246615 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0133538 Jy
! Component: 100  -  total flux cleaned = 0.0223075 Jy
! Component: 150  -  total flux cleaned = 0.0286449 Jy
! Component: 200  -  total flux cleaned = 0.0333115 Jy
! Total flux subtracted in 200 components = 0.0333115 Jy
! Clean residual min=-0.001909 max=0.002723 Jy/beam
! Clean residual mean=0.000040 rms=0.000545 Jy/beam
! Combined flux in latest and established models = 0.227597 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 57 components and 0.227597 Jy
! Inverting map 
! Added new window around map position (0, -3.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00352028 Jy
! Component: 100  -  total flux cleaned = 0.00627465 Jy
! Component: 150  -  total flux cleaned = 0.00853736 Jy
! Component: 200  -  total flux cleaned = 0.0104384 Jy
! Total flux subtracted in 200 components = 0.0104384 Jy
! Clean residual min=-0.001463 max=0.001627 Jy/beam
! Clean residual mean=0.000026 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.238035 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 90 components and 0.238035 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.305 mas, bmaj=2.361 mas, bpa=11.05 degrees
! Estimated noise=0.297707 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0027333 Jy
! Component: 100  -  total flux cleaned = 0.00478445 Jy
! Component: 150  -  total flux cleaned = 0.00643837 Jy
! Component: 200  -  total flux cleaned = 0.00779521 Jy
! Total flux subtracted in 200 components = 0.00779521 Jy
! Clean residual min=-0.001487 max=0.001854 Jy/beam
! Clean residual mean=0.000036 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.245831 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000999759 Jy
! Component: 100  -  total flux cleaned = 0.00177406 Jy
! Component: 150  -  total flux cleaned = 0.00244311 Jy
! Component: 200  -  total flux cleaned = 0.00302466 Jy
! Total flux subtracted in 200 components = 0.00302466 Jy
! Clean residual min=-0.001325 max=0.001662 Jy/beam
! Clean residual mean=0.000029 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.248855 Jy
! Adding 113 model components to the UV plane model.
! The established model now contains 193 components and 0.248855 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.165 mas, bmaj=1.284 mas, bpa=-13.2 degrees
! Estimated noise=0.246615 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000529518 Jy
! Component: 100  -  total flux cleaned = 0.000655118 Jy
! Component: 150  -  total flux cleaned = 0.000768837 Jy
! Component: 200  -  total flux cleaned = 0.000821527 Jy
! Total flux subtracted in 200 components = 0.000821527 Jy
! Clean residual min=-0.001197 max=0.001365 Jy/beam
! Clean residual mean=0.000012 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.249677 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 223 components and 0.249677 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057180Jy  sigma=1.204184
! Fit after  self-cal, rms=0.057168Jy  sigma=1.203968
wmodel J1545+5135_X_map.mod
! Writing 223 model components to file: J1545+5135_X_map.mod
wobs   J1545+5135_X_uvs.fits
! Writing UV FITS file: J1545+5135_X_uvs.fits
wwins  J1545+5135_X_map.win
! wwins: Wrote 5 windows to J1545+5135_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00045949 Jy
! Component: 100  -  total flux cleaned = 0.000723789 Jy
! Component: 150  -  total flux cleaned = 0.000976831 Jy
! Component: 200  -  total flux cleaned = 0.00122126 Jy
! Component: 250  -  total flux cleaned = 0.00143833 Jy
! Component: 300  -  total flux cleaned = 0.00162999 Jy
! Component: 350  -  total flux cleaned = 0.00181717 Jy
! Component: 400  -  total flux cleaned = 0.00201856 Jy
! Component: 450  -  total flux cleaned = 0.00212634 Jy
! Component: 500  -  total flux cleaned = 0.00221504 Jy
! Component: 550  -  total flux cleaned = 0.00233646 Jy
! Component: 600  -  total flux cleaned = 0.00243891 Jy
! Component: 650  -  total flux cleaned = 0.0024727 Jy
! Component: 700  -  total flux cleaned = 0.00262219 Jy
! Component: 750  -  total flux cleaned = 0.00272043 Jy
! Component: 800  -  total flux cleaned = 0.00281735 Jy
! Component: 850  -  total flux cleaned = 0.00288106 Jy
! Component: 900  -  total flux cleaned = 0.00294418 Jy
! Component: 950  -  total flux cleaned = 0.00300684 Jy
! Component: 1000  -  total flux cleaned = 0.00308361 Jy
! Component: 1050  -  total flux cleaned = 0.00312947 Jy
! Component: 1100  -  total flux cleaned = 0.00317443 Jy
! Component: 1150  -  total flux cleaned = 0.00324874 Jy
! Component: 1200  -  total flux cleaned = 0.00324851 Jy
! Component: 1250  -  total flux cleaned = 0.00324844 Jy
! Component: 1300  -  total flux cleaned = 0.00326285 Jy
! Component: 1350  -  total flux cleaned = 0.00326296 Jy
! Component: 1400  -  total flux cleaned = 0.00331975 Jy
! Component: 1450  -  total flux cleaned = 0.00334758 Jy
! Component: 1500  -  total flux cleaned = 0.00340304 Jy
! Component: 1550  -  total flux cleaned = 0.00340324 Jy
! Component: 1600  -  total flux cleaned = 0.00341683 Jy
! Component: 1650  -  total flux cleaned = 0.00345723 Jy
! Component: 1700  -  total flux cleaned = 0.00347071 Jy
! Component: 1750  -  total flux cleaned = 0.0034707 Jy
! Component: 1800  -  total flux cleaned = 0.00347079 Jy
! Component: 1850  -  total flux cleaned = 0.00353557 Jy
! Component: 1900  -  total flux cleaned = 0.00349693 Jy
! Component: 1950  -  total flux cleaned = 0.00354779 Jy
! Component: 2000  -  total flux cleaned = 0.00352246 Jy
! Component: 2050  -  total flux cleaned = 0.00352253 Jy
! Component: 2100  -  total flux cleaned = 0.00354742 Jy
! Component: 2150  -  total flux cleaned = 0.00353492 Jy
! Component: 2200  -  total flux cleaned = 0.00353504 Jy
! Component: 2250  -  total flux cleaned = 0.00352301 Jy
! Component: 2300  -  total flux cleaned = 0.00355936 Jy
! Component: 2350  -  total flux cleaned = 0.00352335 Jy
! Component: 2400  -  total flux cleaned = 0.00354719 Jy
! Component: 2450  -  total flux cleaned = 0.00355895 Jy
! Component: 2500  -  total flux cleaned = 0.00355879 Jy
! Component: 2550  -  total flux cleaned = 0.00361695 Jy
! Component: 2600  -  total flux cleaned = 0.00361698 Jy
! Component: 2650  -  total flux cleaned = 0.00361695 Jy
! Component: 2700  -  total flux cleaned = 0.00362829 Jy
! Component: 2750  -  total flux cleaned = 0.0036963 Jy
! Component: 2800  -  total flux cleaned = 0.00369629 Jy
! Component: 2850  -  total flux cleaned = 0.00370745 Jy
! Component: 2900  -  total flux cleaned = 0.00376311 Jy
! Component: 2950  -  total flux cleaned = 0.00375193 Jy
! Component: 3000  -  total flux cleaned = 0.00379585 Jy
! Component: 3050  -  total flux cleaned = 0.00378499 Jy
! Component: 3100  -  total flux cleaned = 0.00380656 Jy
! Component: 3150  -  total flux cleaned = 0.00381743 Jy
! Component: 3200  -  total flux cleaned = 0.00383898 Jy
! Component: 3250  -  total flux cleaned = 0.00387097 Jy
! Component: 3300  -  total flux cleaned = 0.00392404 Jy
! Component: 3350  -  total flux cleaned = 0.00397674 Jy
! Component: 3400  -  total flux cleaned = 0.00402918 Jy
! Component: 3450  -  total flux cleaned = 0.00402907 Jy
! Component: 3500  -  total flux cleaned = 0.00403935 Jy
! Component: 3550  -  total flux cleaned = 0.00409096 Jy
! Component: 3600  -  total flux cleaned = 0.00413188 Jy
! Component: 3650  -  total flux cleaned = 0.00416237 Jy
! Component: 3700  -  total flux cleaned = 0.00415216 Jy
! Component: 3750  -  total flux cleaned = 0.00422274 Jy
! Component: 3800  -  total flux cleaned = 0.00425293 Jy
! Component: 3850  -  total flux cleaned = 0.00428278 Jy
! Component: 3900  -  total flux cleaned = 0.00427279 Jy
! Component: 3950  -  total flux cleaned = 0.00430245 Jy
! Component: 4000  -  total flux cleaned = 0.00434174 Jy
! Component: 4050  -  total flux cleaned = 0.00434173 Jy
! Total flux subtracted in 4096 components = 0.00440979 Jy
! Clean residual min=-0.000609 max=0.000693 Jy/beam
! Clean residual mean=0.000003 rms=0.000166 Jy/beam
! Combined flux in latest and established models = 0.254087 Jy
keep
! Adding 322 model components to the UV plane model.
! The established model now contains 545 components and 0.254086 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1545+5135_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.165 x 1.284 at -13.2 degrees (North through East)
! Clean map  min=-0.00095469  max=0.16886 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1545+5135_X_map.fits
wmodel /vlbi/uf001/uva//J1545+5135_X_map.mod
! Writing 545 model components to file: /vlbi/uf001/uva//J1545+5135_X_map.mod
wobs   /vlbi/uf001/uva//J1545+5135_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1545+5135_X_uvs.fits
wwins  /vlbi/uf001/uva//J1545+5135_X_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J1545+5135_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.168864 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00016532 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.293705 0.293705 0.587409 1.17482 2.34964 4.69928 9.39855 18.7971 37.5942 75.1884
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.168 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1021.43 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1545+5135_X_dfm.log closed on Mon Jan 14 03:26:45 2019