! Started logfile: /vlbi/uf001/uva//J1536+3833_X_dfm.log on Mon Jan 14 03:22:18 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J1536+3833_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1536+3833_X_uva.fits
! AN table 1: 72 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.857716 visibilities/baseline/integration-bin.
! Found source: J1536+3833
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 33348 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1536+3833_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006123Jy  sigma=22.798311
! Fit after  self-cal, rms=0.910227Jy  sigma=20.593808
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7133 mas, bmaj=1.188 mas, bpa=-4.856 degrees
! Estimated noise=0.394976 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0640371 Jy
! Component: 100  -  total flux cleaned = 0.0890221 Jy
! Total flux subtracted in 100 components = 0.0890221 Jy
! Clean residual min=-0.004383 max=0.011635 Jy/beam
! Clean residual mean=-0.000007 rms=0.001116 Jy/beam
! Combined flux in latest and established models = 0.0890222 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0890222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064334Jy  sigma=1.360707
! Fit after  self-cal, rms=0.063723Jy  sigma=1.347087
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0146487 Jy
! Component: 100  -  total flux cleaned = 0.022322 Jy
! Total flux subtracted in 100 components = 0.022322 Jy
! Clean residual min=-0.002851 max=0.003968 Jy/beam
! Clean residual mean=-0.000005 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.111344 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 9 components and 0.111344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059463Jy  sigma=1.237702
! Fit after  self-cal, rms=0.059381Jy  sigma=1.235859
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00496754 Jy
! Component: 100  -  total flux cleaned = 0.00748986 Jy
! Total flux subtracted in 100 components = 0.00748986 Jy
! Clean residual min=-0.002597 max=0.003263 Jy/beam
! Clean residual mean=-0.000004 rms=0.000630 Jy/beam
! Combined flux in latest and established models = 0.118834 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 13 components and 0.118834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058841Jy  sigma=1.221739
! Fit after  self-cal, rms=0.058828Jy  sigma=1.221503
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9135 mas, bmaj=1.523 mas, bpa=-2.088 degrees
! Estimated noise=0.174305 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00407407 Jy
! Component: 100  -  total flux cleaned = 0.0066956 Jy
! Component: 150  -  total flux cleaned = 0.00864135 Jy
! Component: 200  -  total flux cleaned = 0.0101327 Jy
! Total flux subtracted in 200 components = 0.0101327 Jy
! Clean residual min=-0.002659 max=0.002800 Jy/beam
! Clean residual mean=-0.000010 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 0.128967 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 35 components and 0.128967 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058518Jy  sigma=1.212635
! Fit after  self-cal, rms=0.058487Jy  sigma=1.211913
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9135 x 1.523 at -2.088 degrees (North through East)
! Clean map  min=-0.0025834  max=0.088394 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        0.96     KP        1.02     
!   LA        0.97     MK        1.02     NL        1.11     OV        0.91     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.07     HN        0.95     KP        1.03     
!   LA        0.99     MK        1.03     NL        1.11     OV        0.90     
!   PT        0.94     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        0.96     KP        1.01     
!   LA        1.02     MK        0.98     NL        1.10     OV        0.88     
!   PT        0.94     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.02     HN        0.99     KP        1.03     
!   LA        0.99     MK        1.05     NL        1.08     OV        0.88     
!   PT        0.93     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.14     HN        0.99     KP        1.02     
!   LA        1.00     MK        1.02     NL        1.14     OV        0.88     
!   PT        0.94     SC        0.95     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.05     HN        0.93     KP        1.05     
!   LA        1.01     MK        1.06     NL        1.09     OV        0.88     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.06     HN        0.98     KP        1.04     
!   LA        1.01     MK        1.02     NL        1.11     OV        0.89     
!   PT        0.94     SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.11     HN        0.98     KP        1.04     
!   LA        0.98     MK        0.98     NL        1.09     OV        0.90     
!   PT        0.95     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.10     HN        0.94     KP        1.00     
!   LA        0.98     MK        1.06     NL        1.11     OV        0.89     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        0.96     KP        1.02     
!   LA        1.02     MK        0.99     NL        1.10     OV        0.90     
!   PT        0.93     SC        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.05     HN        0.99     KP        1.04     
!   LA        0.99     MK        1.02     NL        1.08     OV        0.90     
!   PT        0.94     SC        0.95     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.14     HN        0.97     KP        1.05     
!   LA        0.99     MK        1.03     NL        1.12     OV        0.87     
!   PT        0.96     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.058487Jy  sigma=1.211913
! Fit after  self-cal, rms=0.057664Jy  sigma=1.194785
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9136 mas, bmaj=1.53 mas, bpa=-1.618 degrees
! Estimated noise=0.173031 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.8, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000632517 Jy
! Component: 100  -  total flux cleaned = 0.000843039 Jy
! Component: 150  -  total flux cleaned = 0.000884935 Jy
! Component: 200  -  total flux cleaned = 0.000922362 Jy
! Total flux subtracted in 200 components = 0.000922362 Jy
! Clean residual min=-0.001092 max=0.001336 Jy/beam
! Clean residual mean=-0.000004 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.129889 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 69 components and 0.129889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057586Jy  sigma=1.193005
! Fit after  self-cal, rms=0.057633Jy  sigma=1.192580
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057633Jy  sigma=1.192580
! Fit after  self-cal, rms=0.057741Jy  sigma=1.188981
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9087 mas, bmaj=1.515 mas, bpa=-1.855 degrees
! Estimated noise=0.172114 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000229618 Jy
! Component: 100  -  total flux cleaned = 0.000139923 Jy
! Component: 150  -  total flux cleaned = 5.8733e-05 Jy
! Component: 200  -  total flux cleaned = 3.55467e-05 Jy
! Total flux subtracted in 200 components = 3.55467e-05 Jy
! Clean residual min=-0.000947 max=0.001061 Jy/beam
! Clean residual mean=-0.000002 rms=0.000225 Jy/beam
! Combined flux in latest and established models = 0.129925 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 86 components and 0.129925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057710Jy  sigma=1.188272
! Fit after  self-cal, rms=0.057728Jy  sigma=1.188176
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (11.2, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00081135 Jy
! Component: 100  -  total flux cleaned = 0.00104275 Jy
! Component: 150  -  total flux cleaned = 0.00120411 Jy
! Component: 200  -  total flux cleaned = 0.00135208 Jy
! Total flux subtracted in 200 components = 0.00135208 Jy
! Clean residual min=-0.000976 max=0.000895 Jy/beam
! Clean residual mean=-0.000002 rms=0.000209 Jy/beam
! Combined flux in latest and established models = 0.131277 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 103 components and 0.131277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057705Jy  sigma=1.187600
! Fit after  self-cal, rms=0.057704Jy  sigma=1.187576
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057704Jy  sigma=1.187576
! Fit after  self-cal, rms=0.057640Jy  sigma=1.187483
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9062 mas, bmaj=1.512 mas, bpa=-1.922 degrees
! Estimated noise=0.171824 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.04206e-05 Jy
! Component: 100  -  total flux cleaned = 0.000220767 Jy
! Component: 150  -  total flux cleaned = 0.000319376 Jy
! Component: 200  -  total flux cleaned = 0.000428546 Jy
! Total flux subtracted in 200 components = 0.000428546 Jy
! Clean residual min=-0.000948 max=0.000854 Jy/beam
! Clean residual mean=-0.000002 rms=0.000199 Jy/beam
! Combined flux in latest and established models = 0.131705 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 109 components and 0.131705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057626Jy  sigma=1.187159
! Fit after  self-cal, rms=0.057627Jy  sigma=1.187142
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.984e-05 Jy
! Component: 100  -  total flux cleaned = 0.000166447 Jy
! Component: 150  -  total flux cleaned = 0.000243892 Jy
! Component: 200  -  total flux cleaned = 0.000287504 Jy
! Total flux subtracted in 200 components = 0.000287504 Jy
! Clean residual min=-0.000930 max=0.000838 Jy/beam
! Clean residual mean=-0.000002 rms=0.000195 Jy/beam
! Combined flux in latest and established models = 0.131993 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 114 components and 0.131993 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057618Jy  sigma=1.186957
! Fit after  self-cal, rms=0.057618Jy  sigma=1.186951
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057618Jy  sigma=1.186951
! Fit after  self-cal, rms=0.057568Jy  sigma=1.186914
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.082 mas, bmaj=2.556 mas, bpa=-3.084 degrees
! Estimated noise=0.221535 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000267326 Jy
! Component: 100  -  total flux cleaned = 0.000424663 Jy
! Component: 150  -  total flux cleaned = 0.00056995 Jy
! Component: 200  -  total flux cleaned = 0.000677605 Jy
! Total flux subtracted in 200 components = 0.000677605 Jy
! Clean residual min=-0.000983 max=0.000838 Jy/beam
! Clean residual mean=-0.000004 rms=0.000215 Jy/beam
! Combined flux in latest and established models = 0.13267 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 142 components and 0.13267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057565Jy  sigma=1.186827
! Fit after  self-cal, rms=0.057566Jy  sigma=1.186816
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000157695 Jy
! Component: 100  -  total flux cleaned = 0.000223061 Jy
! Component: 150  -  total flux cleaned = 0.000252442 Jy
! Component: 200  -  total flux cleaned = 0.000288283 Jy
! Total flux subtracted in 200 components = 0.000288283 Jy
! Clean residual min=-0.000971 max=0.000812 Jy/beam
! Clean residual mean=-0.000003 rms=0.000209 Jy/beam
! Combined flux in latest and established models = 0.132959 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 160 components and 0.132959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057565Jy  sigma=1.186791
! Fit after  self-cal, rms=0.057565Jy  sigma=1.186789
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9049 mas, bmaj=1.511 mas, bpa=-1.915 degrees
! Estimated noise=0.171699 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9049 x 1.511 at -1.915 degrees (North through East)
! Clean map  min=-0.00081528  max=0.087371 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7089 mas, bmaj=1.179 mas, bpa=-4.56 degrees
! Estimated noise=0.387228 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0634918 Jy
! Component: 100  -  total flux cleaned = 0.0906564 Jy
! Component: 150  -  total flux cleaned = 0.104712 Jy
! Component: 200  -  total flux cleaned = 0.112072 Jy
! Total flux subtracted in 200 components = 0.112072 Jy
! Clean residual min=-0.002359 max=0.003609 Jy/beam
! Clean residual mean=-0.000003 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.112072 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.112072 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9049 mas, bmaj=1.511 mas, bpa=-1.915 degrees
! Estimated noise=0.171699 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00599764 Jy
! Component: 100  -  total flux cleaned = 0.0092098 Jy
! Component: 150  -  total flux cleaned = 0.0114045 Jy
! Component: 200  -  total flux cleaned = 0.0130626 Jy
! Total flux subtracted in 200 components = 0.0130626 Jy
! Clean residual min=-0.001214 max=0.001009 Jy/beam
! Clean residual mean=-0.000004 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.125135 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 32 components and 0.125135 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.082 mas, bmaj=2.556 mas, bpa=-3.084 degrees
! Estimated noise=0.221535 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00212706 Jy
! Component: 100  -  total flux cleaned = 0.00362098 Jy
! Component: 150  -  total flux cleaned = 0.00473843 Jy
! Component: 200  -  total flux cleaned = 0.00545317 Jy
! Total flux subtracted in 200 components = 0.00545317 Jy
! Clean residual min=-0.001031 max=0.000945 Jy/beam
! Clean residual mean=-0.000006 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.130588 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000500359 Jy
! Component: 100  -  total flux cleaned = 0.000921086 Jy
! Component: 150  -  total flux cleaned = 0.00117457 Jy
! Component: 200  -  total flux cleaned = 0.00141249 Jy
! Total flux subtracted in 200 components = 0.00141249 Jy
! Clean residual min=-0.000996 max=0.000883 Jy/beam
! Clean residual mean=-0.000004 rms=0.000220 Jy/beam
! Combined flux in latest and established models = 0.132 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 93 components and 0.132 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9049 mas, bmaj=1.511 mas, bpa=-1.915 degrees
! Estimated noise=0.171699 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000157993 Jy
! Component: 100  -  total flux cleaned = 4.55238e-05 Jy
! Component: 150  -  total flux cleaned = 0.000259174 Jy
! Component: 200  -  total flux cleaned = 0.000415058 Jy
! Total flux subtracted in 200 components = 0.000415058 Jy
! Clean residual min=-0.001000 max=0.000795 Jy/beam
! Clean residual mean=-0.000002 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.132415 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 113 components and 0.132415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057569Jy  sigma=1.186934
! Fit after  self-cal, rms=0.057562Jy  sigma=1.186778
wmodel J1536+3833_X_map.mod
! Writing 113 model components to file: J1536+3833_X_map.mod
wobs   J1536+3833_X_uvs.fits
! Writing UV FITS file: J1536+3833_X_uvs.fits
wwins  J1536+3833_X_map.win
! wwins: Wrote 4 windows to J1536+3833_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000374914 Jy
! Component: 100  -  total flux cleaned = -0.000464408 Jy
! Component: 150  -  total flux cleaned = -0.000519956 Jy
! Component: 200  -  total flux cleaned = -0.000586402 Jy
! Component: 250  -  total flux cleaned = -0.000650807 Jy
! Component: 300  -  total flux cleaned = -0.000726031 Jy
! Component: 350  -  total flux cleaned = -0.000762684 Jy
! Component: 400  -  total flux cleaned = -0.000882385 Jy
! Component: 450  -  total flux cleaned = -0.000976262 Jy
! Component: 500  -  total flux cleaned = -0.00104536 Jy
! Component: 550  -  total flux cleaned = -0.0011135 Jy
! Component: 600  -  total flux cleaned = -0.00118069 Jy
! Component: 650  -  total flux cleaned = -0.00123587 Jy
! Component: 700  -  total flux cleaned = -0.00126862 Jy
! Component: 750  -  total flux cleaned = -0.00134409 Jy
! Component: 800  -  total flux cleaned = -0.00139717 Jy
! Component: 850  -  total flux cleaned = -0.00143915 Jy
! Component: 900  -  total flux cleaned = -0.00147029 Jy
! Component: 950  -  total flux cleaned = -0.00150117 Jy
! Component: 1000  -  total flux cleaned = -0.00153182 Jy
! Component: 1050  -  total flux cleaned = -0.00156196 Jy
! Component: 1100  -  total flux cleaned = -0.00160178 Jy
! Component: 1150  -  total flux cleaned = -0.00164122 Jy
! Component: 1200  -  total flux cleaned = -0.00166087 Jy
! Component: 1250  -  total flux cleaned = -0.00169967 Jy
! Component: 1300  -  total flux cleaned = -0.00173808 Jy
! Component: 1350  -  total flux cleaned = -0.00177623 Jy
! Component: 1400  -  total flux cleaned = -0.00181409 Jy
! Component: 1450  -  total flux cleaned = -0.00189826 Jy
! Component: 1500  -  total flux cleaned = -0.00191696 Jy
! Component: 1550  -  total flux cleaned = -0.00196294 Jy
! Component: 1600  -  total flux cleaned = -0.00201774 Jy
! Component: 1650  -  total flux cleaned = -0.00206293 Jy
! Component: 1700  -  total flux cleaned = -0.00209888 Jy
! Component: 1750  -  total flux cleaned = -0.0021256 Jy
! Component: 1800  -  total flux cleaned = -0.00213448 Jy
! Component: 1850  -  total flux cleaned = -0.00218703 Jy
! Component: 1900  -  total flux cleaned = -0.00217829 Jy
! Component: 1950  -  total flux cleaned = -0.00219563 Jy
! Component: 2000  -  total flux cleaned = -0.00220422 Jy
! Component: 2050  -  total flux cleaned = -0.00219576 Jy
! Component: 2100  -  total flux cleaned = -0.00220421 Jy
! Component: 2150  -  total flux cleaned = -0.00221255 Jy
! Component: 2200  -  total flux cleaned = -0.00222923 Jy
! Component: 2250  -  total flux cleaned = -0.00219594 Jy
! Component: 2300  -  total flux cleaned = -0.00222901 Jy
! Component: 2350  -  total flux cleaned = -0.00222899 Jy
! Component: 2400  -  total flux cleaned = -0.00223716 Jy
! Component: 2450  -  total flux cleaned = -0.00222908 Jy
! Component: 2500  -  total flux cleaned = -0.0022691 Jy
! Component: 2550  -  total flux cleaned = -0.00223716 Jy
! Component: 2600  -  total flux cleaned = -0.00229277 Jy
! Component: 2650  -  total flux cleaned = -0.00225339 Jy
! Component: 2700  -  total flux cleaned = -0.00226128 Jy
! Component: 2750  -  total flux cleaned = -0.00225352 Jy
! Component: 2800  -  total flux cleaned = -0.00228454 Jy
! Component: 2850  -  total flux cleaned = -0.00227683 Jy
! Component: 2900  -  total flux cleaned = -0.00227679 Jy
! Component: 2950  -  total flux cleaned = -0.00226916 Jy
! Component: 3000  -  total flux cleaned = -0.00226163 Jy
! Component: 3050  -  total flux cleaned = -0.00224658 Jy
! Component: 3100  -  total flux cleaned = -0.00225402 Jy
! Component: 3150  -  total flux cleaned = -0.00223163 Jy
! Component: 3200  -  total flux cleaned = -0.00220939 Jy
! Component: 3250  -  total flux cleaned = -0.00223886 Jy
! Component: 3300  -  total flux cleaned = -0.00220223 Jy
! Component: 3350  -  total flux cleaned = -0.00223133 Jy
! Component: 3400  -  total flux cleaned = -0.00220228 Jy
! Component: 3450  -  total flux cleaned = -0.00218061 Jy
! Component: 3500  -  total flux cleaned = -0.00220215 Jy
! Component: 3550  -  total flux cleaned = -0.00220217 Jy
! Component: 3600  -  total flux cleaned = -0.00218087 Jy
! Component: 3650  -  total flux cleaned = -0.00220209 Jy
! Component: 3700  -  total flux cleaned = -0.00218093 Jy
! Component: 3750  -  total flux cleaned = -0.00218093 Jy
! Component: 3800  -  total flux cleaned = -0.00216004 Jy
! Component: 3850  -  total flux cleaned = -0.00213924 Jy
! Component: 3900  -  total flux cleaned = -0.00214611 Jy
! Component: 3950  -  total flux cleaned = -0.00211867 Jy
! Component: 4000  -  total flux cleaned = -0.00213234 Jy
! Component: 4050  -  total flux cleaned = -0.00212553 Jy
! Total flux subtracted in 4096 components = -0.00211874 Jy
! Clean residual min=-0.000418 max=0.000494 Jy/beam
! Clean residual mean=-0.000001 rms=0.000115 Jy/beam
! Combined flux in latest and established models = 0.130297 Jy
keep
! Adding 302 model components to the UV plane model.
! The established model now contains 415 components and 0.130296 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1536+3833_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9049 x 1.511 at -1.915 degrees (North through East)
! Clean map  min=-0.00077876  max=0.087196 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1536+3833_X_map.fits
wmodel /vlbi/uf001/uva//J1536+3833_X_map.mod
! Writing 415 model components to file: /vlbi/uf001/uva//J1536+3833_X_map.mod
wobs   /vlbi/uf001/uva//J1536+3833_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1536+3833_X_uvs.fits
wwins  /vlbi/uf001/uva//J1536+3833_X_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J1536+3833_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0871961 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000114909 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.395348 0.395348 0.790697 1.58139 3.16279 6.32557 12.6511 25.3023 50.6046
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.087 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  758.824 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1536+3833_X_dfm.log closed on Mon Jan 14 03:22:24 2019