! Started logfile: /vlbi/uf001/uvm//J1530-1950_S_a_dfm.log on Sun Jan 13 21:54:00 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J1530-1950_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J1530-1950_S_a_uvm.fits
! AN table 1: 88 integrations on 36 of 36 possible baselines.
! AN table 2: 73 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.898695 visibilities/baseline/integration-bin.
! Found source: J1530-1950
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 14052 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1530-1950_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 83 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 83 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 83 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.018209Jy  sigma=16.940993
! Fit after  self-cal, rms=0.852377Jy  sigma=14.182546
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.666 mas, bmaj=12.35 mas, bpa=-19.43 degrees
! Estimated noise=0.693256 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.112398 Jy
! Component: 100  -  total flux cleaned = 0.139247 Jy
! Total flux subtracted in 100 components = 0.139247 Jy
! Clean residual min=-0.006265 max=0.012391 Jy/beam
! Clean residual mean=-0.000004 rms=0.001952 Jy/beam
! Combined flux in latest and established models = 0.139247 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.139247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095165Jy  sigma=1.346794
! Fit after  self-cal, rms=0.095151Jy  sigma=1.346195
! Inverting map 
! Added new window around map position (37.5, -58).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121875 Jy
! Component: 100  -  total flux cleaned = 0.0180165 Jy
! Total flux subtracted in 100 components = 0.0180165 Jy
! Clean residual min=-0.006196 max=0.009531 Jy/beam
! Clean residual mean=-0.000004 rms=0.001634 Jy/beam
! Combined flux in latest and established models = 0.157263 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 26 components and 0.157263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092977Jy  sigma=1.304787
! Fit after  self-cal, rms=0.092922Jy  sigma=1.302770
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.49 mas, bmaj=14.06 mas, bpa=-17.99 degrees
! Estimated noise=0.368944 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00943275 Jy
! Component: 100  -  total flux cleaned = 0.0149165 Jy
! Component: 150  -  total flux cleaned = 0.0175851 Jy
! Component: 200  -  total flux cleaned = 0.0189459 Jy
! Total flux subtracted in 200 components = 0.0189459 Jy
! Clean residual min=-0.005156 max=0.007310 Jy/beam
! Clean residual mean=0.000003 rms=0.001497 Jy/beam
! Combined flux in latest and established models = 0.176209 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 58 components and 0.176209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091717Jy  sigma=1.282767
! Fit after  self-cal, rms=0.091723Jy  sigma=1.282417
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.49 x 14.06 at -17.99 degrees (North through East)
! Clean map  min=-0.0052732  max=0.14782 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.89     HN        1.06     KP        0.99     
!   LA        0.86     MK        0.94     NL        1.00     OV        0.94     
!   PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.74     FD        0.98     HN        1.10     KP        1.04     
!   LA        1.01     MK        1.16     NL        1.11     OV        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        1.01     HN        1.07     KP        1.00     
!   LA        0.88     MK        0.95     NL        1.01     OV        0.82     
!   PT        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.43     FD        0.98     HN        1.07     KP        1.05     
!   LA        1.07     MK        1.11     NL        1.13     OV        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.95     HN        1.10     KP        1.01     
!   LA        0.86     MK        0.98     NL        1.05     OV        0.95     
!   PT        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.88     FD        0.96     HN        1.05     KP        1.06     
!   LA        1.06     MK        1.04     NL        1.19     OV        1.07     
! 
! 
! Fit before self-cal, rms=0.091723Jy  sigma=1.282417
! Fit after  self-cal, rms=0.089865Jy  sigma=1.236530
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.54 mas, bmaj=14.19 mas, bpa=-17.92 degrees
! Estimated noise=0.368252 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00370364 Jy
! Component: 100  -  total flux cleaned = -0.00400231 Jy
! Component: 150  -  total flux cleaned = -0.00433748 Jy
! Component: 200  -  total flux cleaned = -0.00462514 Jy
! Total flux subtracted in 200 components = -0.00462514 Jy
! Clean residual min=-0.003961 max=0.004772 Jy/beam
! Clean residual mean=-0.000002 rms=0.001040 Jy/beam
! Combined flux in latest and established models = 0.171584 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 71 components and 0.171584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089554Jy  sigma=1.232930
! Fit after  self-cal, rms=0.089654Jy  sigma=1.232396
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089654Jy  sigma=1.232396
! Fit after  self-cal, rms=0.096000Jy  sigma=1.206276
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.544 mas, bmaj=14.47 mas, bpa=-18.19 degrees
! Estimated noise=0.36899 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00153867 Jy
! Component: 100  -  total flux cleaned = -0.00173216 Jy
! Component: 150  -  total flux cleaned = -0.00184484 Jy
! Component: 200  -  total flux cleaned = -0.00194142 Jy
! Total flux subtracted in 200 components = -0.00194142 Jy
! Clean residual min=-0.001855 max=0.001901 Jy/beam
! Clean residual mean=0.000001 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.169643 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 83 components and 0.169643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095901Jy  sigma=1.204712
! Fit after  self-cal, rms=0.096020Jy  sigma=1.204269
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000625018 Jy
! Component: 100  -  total flux cleaned = -0.000586127 Jy
! Component: 150  -  total flux cleaned = -0.000553299 Jy
! Component: 200  -  total flux cleaned = -0.000553668 Jy
! Total flux subtracted in 200 components = -0.000553668 Jy
! Clean residual min=-0.001854 max=0.001810 Jy/beam
! Clean residual mean=0.000001 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.169089 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 91 components and 0.169089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095988Jy  sigma=1.203828
! Fit after  self-cal, rms=0.095987Jy  sigma=1.203793
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095987Jy  sigma=1.203793
! Fit after  self-cal, rms=0.097336Jy  sigma=1.203389
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.543 mas, bmaj=14.52 mas, bpa=-18.21 degrees
! Estimated noise=0.368599 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000739451 Jy
! Component: 100  -  total flux cleaned = -0.000853459 Jy
! Component: 150  -  total flux cleaned = -0.000920333 Jy
! Component: 200  -  total flux cleaned = -0.000977066 Jy
! Total flux subtracted in 200 components = -0.000977066 Jy
! Clean residual min=-0.001754 max=0.001667 Jy/beam
! Clean residual mean=0.000001 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.168112 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 94 components and 0.168112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097302Jy  sigma=1.202906
! Fit after  self-cal, rms=0.097306Jy  sigma=1.202867
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000250806 Jy
! Component: 100  -  total flux cleaned = -0.000157302 Jy
! Component: 150  -  total flux cleaned = -0.000179063 Jy
! Component: 200  -  total flux cleaned = -0.000198154 Jy
! Total flux subtracted in 200 components = -0.000198154 Jy
! Clean residual min=-0.001729 max=0.001639 Jy/beam
! Clean residual mean=0.000001 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.167914 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 98 components and 0.167914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097294Jy  sigma=1.202708
! Fit after  self-cal, rms=0.097291Jy  sigma=1.202698
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097291Jy  sigma=1.202698
! Fit after  self-cal, rms=0.097983Jy  sigma=1.202544
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.123 mas, bmaj=20.13 mas, bpa=-7.505 degrees
! Estimated noise=0.437202 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000344904 Jy
! Component: 100  -  total flux cleaned = -0.000425254 Jy
! Component: 150  -  total flux cleaned = -0.00042509 Jy
! Component: 200  -  total flux cleaned = -0.0004251 Jy
! Total flux subtracted in 200 components = -0.0004251 Jy
! Clean residual min=-0.001964 max=0.001687 Jy/beam
! Clean residual mean=0.000002 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.167489 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 112 components and 0.167489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097977Jy  sigma=1.202467
! Fit after  self-cal, rms=0.097978Jy  sigma=1.202456
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.44615e-05 Jy
! Component: 100  -  total flux cleaned = -8.49647e-05 Jy
! Component: 150  -  total flux cleaned = -9.54713e-05 Jy
! Component: 200  -  total flux cleaned = -0.000104682 Jy
! Total flux subtracted in 200 components = -0.000104682 Jy
! Clean residual min=-0.001921 max=0.001680 Jy/beam
! Clean residual mean=0.000002 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.167384 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 122 components and 0.167384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097975Jy  sigma=1.202437
! Fit after  self-cal, rms=0.097973Jy  sigma=1.202432
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.542 mas, bmaj=14.55 mas, bpa=-18.22 degrees
! Estimated noise=0.368267 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.542 x 14.55 at -18.22 degrees (North through East)
! Clean map  min=-0.0020709  max=0.14755 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.695 mas, bmaj=12.74 mas, bpa=-19.43 degrees
! Estimated noise=0.717942 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.116219 Jy
! Component: 100  -  total flux cleaned = 0.142587 Jy
! Component: 150  -  total flux cleaned = 0.151903 Jy
! Component: 200  -  total flux cleaned = 0.156688 Jy
! Total flux subtracted in 200 components = 0.156688 Jy
! Clean residual min=-0.002811 max=0.003347 Jy/beam
! Clean residual mean=0.000001 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.156688 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and 0.156688 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.542 mas, bmaj=14.55 mas, bpa=-18.22 degrees
! Estimated noise=0.368267 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00449788 Jy
! Component: 100  -  total flux cleaned = 0.00724487 Jy
! Component: 150  -  total flux cleaned = 0.00901579 Jy
! Component: 200  -  total flux cleaned = 0.00999657 Jy
! Total flux subtracted in 200 components = 0.00999657 Jy
! Clean residual min=-0.001843 max=0.001803 Jy/beam
! Clean residual mean=0.000001 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.166685 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 82 components and 0.166685 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.123 mas, bmaj=20.13 mas, bpa=-7.505 degrees
! Estimated noise=0.437202 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00056183 Jy
! Component: 100  -  total flux cleaned = 0.000783931 Jy
! Component: 150  -  total flux cleaned = 0.000905621 Jy
! Component: 200  -  total flux cleaned = 0.000905738 Jy
! Total flux subtracted in 200 components = 0.000905738 Jy
! Clean residual min=-0.001902 max=0.001711 Jy/beam
! Clean residual mean=0.000003 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.16759 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.43374e-07 Jy
! Component: 100  -  total flux cleaned = -1.42963e-08 Jy
! Component: 150  -  total flux cleaned = -4.15937e-07 Jy
! Component: 200  -  total flux cleaned = 1.36874e-05 Jy
! Total flux subtracted in 200 components = 1.36874e-05 Jy
! Clean residual min=-0.001873 max=0.001695 Jy/beam
! Clean residual mean=0.000003 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.167604 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 120 components and 0.167604 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.542 mas, bmaj=14.55 mas, bpa=-18.22 degrees
! Estimated noise=0.368267 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.15034e-05 Jy
! Component: 100  -  total flux cleaned = -7.23309e-05 Jy
! Component: 150  -  total flux cleaned = -2.91322e-05 Jy
! Component: 200  -  total flux cleaned = -9.14826e-06 Jy
! Total flux subtracted in 200 components = -9.14826e-06 Jy
! Clean residual min=-0.001720 max=0.001650 Jy/beam
! Clean residual mean=0.000001 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.167595 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 136 components and 0.167595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098012Jy  sigma=1.202626
! Fit after  self-cal, rms=0.097935Jy  sigma=1.202508
wmodel J1530-1950_S_a_map.mod
! Writing 136 model components to file: J1530-1950_S_a_map.mod
wobs   J1530-1950_S_a_uvs.fits
! Writing UV FITS file: J1530-1950_S_a_uvs.fits
wwins  J1530-1950_S_a_map.win
! wwins: Wrote 2 windows to J1530-1950_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000222191 Jy
! Component: 100  -  total flux cleaned = -0.000252073 Jy
! Component: 150  -  total flux cleaned = -0.000332945 Jy
! Component: 200  -  total flux cleaned = -0.00040942 Jy
! Component: 250  -  total flux cleaned = -0.000434482 Jy
! Component: 300  -  total flux cleaned = -0.000506584 Jy
! Component: 350  -  total flux cleaned = -0.000483207 Jy
! Component: 400  -  total flux cleaned = -0.000459846 Jy
! Component: 450  -  total flux cleaned = -0.000415046 Jy
! Component: 500  -  total flux cleaned = -0.000414941 Jy
! Component: 550  -  total flux cleaned = -0.000372189 Jy
! Component: 600  -  total flux cleaned = -0.000330367 Jy
! Component: 650  -  total flux cleaned = -0.000351197 Jy
! Component: 700  -  total flux cleaned = -0.000351182 Jy
! Component: 750  -  total flux cleaned = -0.000350999 Jy
! Component: 800  -  total flux cleaned = -0.000311744 Jy
! Component: 850  -  total flux cleaned = -0.000311461 Jy
! Component: 900  -  total flux cleaned = -0.000273249 Jy
! Component: 950  -  total flux cleaned = -0.000291798 Jy
! Component: 1000  -  total flux cleaned = -0.000273298 Jy
! Component: 1050  -  total flux cleaned = -0.000273072 Jy
! Component: 1100  -  total flux cleaned = -0.000254682 Jy
! Component: 1150  -  total flux cleaned = -0.000307527 Jy
! Component: 1200  -  total flux cleaned = -0.000255186 Jy
! Component: 1250  -  total flux cleaned = -0.00030669 Jy
! Component: 1300  -  total flux cleaned = -0.000323534 Jy
! Component: 1350  -  total flux cleaned = -0.000339954 Jy
! Component: 1400  -  total flux cleaned = -0.000307034 Jy
! Component: 1450  -  total flux cleaned = -0.000323221 Jy
! Component: 1500  -  total flux cleaned = -0.000339488 Jy
! Component: 1550  -  total flux cleaned = -0.000371095 Jy
! Component: 1600  -  total flux cleaned = -0.000355461 Jy
! Component: 1650  -  total flux cleaned = -0.000355607 Jy
! Component: 1700  -  total flux cleaned = -0.000309437 Jy
! Component: 1750  -  total flux cleaned = -0.00029418 Jy
! Component: 1800  -  total flux cleaned = -0.000279136 Jy
! Component: 1850  -  total flux cleaned = -0.000264339 Jy
! Component: 1900  -  total flux cleaned = -0.00022016 Jy
! Component: 1950  -  total flux cleaned = -0.000234586 Jy
! Component: 2000  -  total flux cleaned = -0.000191111 Jy
! Component: 2050  -  total flux cleaned = -0.000148012 Jy
! Component: 2100  -  total flux cleaned = -0.000133547 Jy
! Component: 2150  -  total flux cleaned = -0.000119235 Jy
! Component: 2200  -  total flux cleaned = -9.14843e-05 Jy
! Component: 2250  -  total flux cleaned = -7.76643e-05 Jy
! Component: 2300  -  total flux cleaned = -9.31186e-06 Jy
! Component: 2350  -  total flux cleaned = -9.15178e-06 Jy
! Component: 2400  -  total flux cleaned = 7.13444e-05 Jy
! Component: 2450  -  total flux cleaned = 9.76393e-05 Jy
! Component: 2500  -  total flux cleaned = 9.74837e-05 Jy
! Component: 2550  -  total flux cleaned = 0.000149607 Jy
! Component: 2600  -  total flux cleaned = 0.000149604 Jy
! Component: 2650  -  total flux cleaned = 0.000136776 Jy
! Component: 2700  -  total flux cleaned = 0.000200506 Jy
! Component: 2750  -  total flux cleaned = 0.000225875 Jy
! Component: 2800  -  total flux cleaned = 0.000238379 Jy
! Component: 2850  -  total flux cleaned = 0.000288339 Jy
! Component: 2900  -  total flux cleaned = 0.000300812 Jy
! Component: 2950  -  total flux cleaned = 0.00028856 Jy
! Component: 3000  -  total flux cleaned = 0.000313011 Jy
! Component: 3050  -  total flux cleaned = 0.00036118 Jy
! Component: 3100  -  total flux cleaned = 0.000397169 Jy
! Component: 3150  -  total flux cleaned = 0.000397224 Jy
! Component: 3200  -  total flux cleaned = 0.000397187 Jy
! Component: 3250  -  total flux cleaned = 0.000385393 Jy
! Component: 3300  -  total flux cleaned = 0.000362011 Jy
! Component: 3350  -  total flux cleaned = 0.000385253 Jy
! Component: 3400  -  total flux cleaned = 0.000350863 Jy
! Component: 3450  -  total flux cleaned = 0.00036243 Jy
! Component: 3500  -  total flux cleaned = 0.000351145 Jy
! Component: 3550  -  total flux cleaned = 0.000328619 Jy
! Component: 3600  -  total flux cleaned = 0.000351167 Jy
! Component: 3650  -  total flux cleaned = 0.000384446 Jy
! Component: 3700  -  total flux cleaned = 0.000373424 Jy
! Component: 3750  -  total flux cleaned = 0.00035152 Jy
! Component: 3800  -  total flux cleaned = 0.000395126 Jy
! Component: 3850  -  total flux cleaned = 0.000427692 Jy
! Component: 3900  -  total flux cleaned = 0.00041689 Jy
! Component: 3950  -  total flux cleaned = 0.000459522 Jy
! Component: 4000  -  total flux cleaned = 0.000470096 Jy
! Component: 4050  -  total flux cleaned = 0.000448984 Jy
! Total flux subtracted in 4096 components = 0.000490931 Jy
! Clean residual min=-0.000678 max=0.000684 Jy/beam
! Clean residual mean=0.000000 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.168086 Jy
keep
! Adding 260 model components to the UV plane model.
! The established model now contains 396 components and 0.168086 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J1530-1950_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.542 x 14.55 at -18.22 degrees (North through East)
! Clean map  min=-0.0011929  max=0.14876 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J1530-1950_S_a_map.fits
wmodel /vlbi/uf001/uvm//J1530-1950_S_a_map.mod
! Writing 396 model components to file: /vlbi/uf001/uvm//J1530-1950_S_a_map.mod
wobs   /vlbi/uf001/uvm//J1530-1950_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J1530-1950_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J1530-1950_S_a_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uvm//J1530-1950_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.148757 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000200994 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.405346 0.405346 0.810691 1.62138 3.24277 6.48553 12.9711 25.9421 51.8843
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.148 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  740.109 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J1530-1950_S_a_dfm.log closed on Sun Jan 13 21:54:04 2019