! Started logfile: /vlbi/uf001/uva//J1524-3012_S_dfm.log on Mon Jan 14 03:17:22 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1524-3012_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1524-3012_S_uva.fits
! AN table 1: 58 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.989272 visibilities/baseline/integration-bin.
! Found source: J1524-3012
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7746 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1524-3012_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009948Jy  sigma=14.880823
! Fit after  self-cal, rms=0.902381Jy  sigma=13.209466
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.463 mas, bmaj=7.012 mas, bpa=-4.017 degrees
! Estimated noise=0.798739 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.081966 Jy
! Component: 100  -  total flux cleaned = 0.109507 Jy
! Total flux subtracted in 100 components = 0.109507 Jy
! Clean residual min=-0.008043 max=0.013651 Jy/beam
! Clean residual mean=-0.000048 rms=0.002366 Jy/beam
! Combined flux in latest and established models = 0.109507 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.109507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104121Jy  sigma=1.322682
! Fit after  self-cal, rms=0.103642Jy  sigma=1.318444
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.939 mas, bmaj=8.076 mas, bpa=-2.967 degrees
! Estimated noise=0.571874 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.5, -9.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0172602 Jy
! Component: 100  -  total flux cleaned = 0.0274114 Jy
! Component: 150  -  total flux cleaned = 0.0341759 Jy
! Component: 200  -  total flux cleaned = 0.0388586 Jy
! Total flux subtracted in 200 components = 0.0388586 Jy
! Clean residual min=-0.004843 max=0.008308 Jy/beam
! Clean residual mean=-0.000053 rms=0.001577 Jy/beam
! Combined flux in latest and established models = 0.148366 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 52 components and 0.148366 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101396Jy  sigma=1.251608
! Fit after  self-cal, rms=0.101191Jy  sigma=1.248391
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.939 x 8.076 at -2.967 degrees (North through East)
! Clean map  min=-0.0043811  max=0.093238 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.92     HN        1.45     KP        0.97     
!   LA        0.96     MK        1.02     NL        1.08     OV        0.93     
!   PT        0.93     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.69     FD        0.91     HN        1.43     KP        0.98     
!   LA        0.92     MK        1.00     NL        1.10     OV        0.88     
!   PT        0.93     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.29     FD        0.93     HN        1.32     KP        0.96     
!   LA        0.93     MK        1.09     NL        1.04     OV        0.91     
!   PT        0.92     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.101191Jy  sigma=1.248391
! Fit after  self-cal, rms=0.132706Jy  sigma=1.219619
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.992 mas, bmaj=8.113 mas, bpa=-2.339 degrees
! Estimated noise=0.579107 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00089967 Jy
! Component: 100  -  total flux cleaned = -0.00110071 Jy
! Component: 150  -  total flux cleaned = -0.00121755 Jy
! Component: 200  -  total flux cleaned = -0.00121719 Jy
! Total flux subtracted in 200 components = -0.00121719 Jy
! Clean residual min=-0.003354 max=0.003516 Jy/beam
! Clean residual mean=-0.000017 rms=0.000816 Jy/beam
! Combined flux in latest and established models = 0.147149 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 64 components and 0.147149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.132635Jy  sigma=1.218446
! Fit after  self-cal, rms=0.133267Jy  sigma=1.217563
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.133267Jy  sigma=1.217563
! Fit after  self-cal, rms=0.136368Jy  sigma=1.217464
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.994 mas, bmaj=8.112 mas, bpa=-2.328 degrees
! Estimated noise=0.579224 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00100321 Jy
! Component: 100  -  total flux cleaned = -0.00110925 Jy
! Component: 150  -  total flux cleaned = -0.00111036 Jy
! Component: 200  -  total flux cleaned = -0.0011527 Jy
! Total flux subtracted in 200 components = -0.0011527 Jy
! Clean residual min=-0.003332 max=0.003388 Jy/beam
! Clean residual mean=-0.000017 rms=0.000796 Jy/beam
! Combined flux in latest and established models = 0.145996 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 74 components and 0.145996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.136327Jy  sigma=1.216770
! Fit after  self-cal, rms=0.136366Jy  sigma=1.216710
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000320917 Jy
! Component: 100  -  total flux cleaned = -0.000320446 Jy
! Component: 150  -  total flux cleaned = -0.000358756 Jy
! Component: 200  -  total flux cleaned = -0.000357465 Jy
! Total flux subtracted in 200 components = -0.000357465 Jy
! Clean residual min=-0.003328 max=0.003305 Jy/beam
! Clean residual mean=-0.000018 rms=0.000787 Jy/beam
! Combined flux in latest and established models = 0.145639 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 76 components and 0.145639 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.136341Jy  sigma=1.216280
! Fit after  self-cal, rms=0.136344Jy  sigma=1.216250
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.136344Jy  sigma=1.216250
! Fit after  self-cal, rms=0.141154Jy  sigma=1.213799
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.996 mas, bmaj=8.125 mas, bpa=-2.377 degrees
! Estimated noise=0.579379 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000606697 Jy
! Component: 100  -  total flux cleaned = -0.000755261 Jy
! Component: 150  -  total flux cleaned = -0.000818572 Jy
! Component: 200  -  total flux cleaned = -0.000902996 Jy
! Total flux subtracted in 200 components = -0.000902996 Jy
! Clean residual min=-0.003106 max=0.002954 Jy/beam
! Clean residual mean=-0.000012 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.144736 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 92 components and 0.144736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.141129Jy  sigma=1.213511
! Fit after  self-cal, rms=0.141191Jy  sigma=1.213436
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000224537 Jy
! Component: 100  -  total flux cleaned = -0.000224063 Jy
! Component: 150  -  total flux cleaned = -0.000223979 Jy
! Component: 200  -  total flux cleaned = -0.000246181 Jy
! Total flux subtracted in 200 components = -0.000246181 Jy
! Clean residual min=-0.003130 max=0.002857 Jy/beam
! Clean residual mean=-0.000013 rms=0.000728 Jy/beam
! Combined flux in latest and established models = 0.144489 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 98 components and 0.144489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.141179Jy  sigma=1.213304
! Fit after  self-cal, rms=0.141178Jy  sigma=1.213295
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.141178Jy  sigma=1.213295
! Fit after  self-cal, rms=0.142699Jy  sigma=1.213228
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.986 mas, bmaj=22.06 mas, bpa=2.826 degrees
! Estimated noise=0.722589 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.47959e-07 Jy
! Component: 100  -  total flux cleaned = -5.04721e-05 Jy
! Component: 150  -  total flux cleaned = -0.000113217 Jy
! Component: 200  -  total flux cleaned = -0.000114028 Jy
! Total flux subtracted in 200 components = -0.000114028 Jy
! Clean residual min=-0.003841 max=0.002815 Jy/beam
! Clean residual mean=-0.000022 rms=0.000880 Jy/beam
! Combined flux in latest and established models = 0.144375 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 105 components and 0.144375 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.142699Jy  sigma=1.213278
! Fit after  self-cal, rms=0.142709Jy  sigma=1.213220
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000137207 Jy
! Component: 100  -  total flux cleaned = 0.000157879 Jy
! Component: 150  -  total flux cleaned = 0.000158943 Jy
! Component: 200  -  total flux cleaned = 0.00017285 Jy
! Total flux subtracted in 200 components = 0.00017285 Jy
! Clean residual min=-0.003799 max=0.002748 Jy/beam
! Clean residual mean=-0.000022 rms=0.000876 Jy/beam
! Combined flux in latest and established models = 0.144548 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 109 components and 0.144548 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.142712Jy  sigma=1.213287
! Fit after  self-cal, rms=0.142710Jy  sigma=1.213270
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.997 mas, bmaj=8.135 mas, bpa=-2.26 degrees
! Estimated noise=0.579761 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.997 x 8.135 at -2.26 degrees (North through East)
! Clean map  min=-0.0030761  max=0.093477 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.511 mas, bmaj=7.029 mas, bpa=-2.957 degrees
! Estimated noise=0.811834 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0823496 Jy
! Component: 100  -  total flux cleaned = 0.10927 Jy
! Component: 150  -  total flux cleaned = 0.121671 Jy
! Component: 200  -  total flux cleaned = 0.129233 Jy
! Total flux subtracted in 200 components = 0.129233 Jy
! Clean residual min=-0.004743 max=0.005342 Jy/beam
! Clean residual mean=-0.000017 rms=0.001161 Jy/beam
! Combined flux in latest and established models = 0.129233 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and 0.129233 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.997 mas, bmaj=8.135 mas, bpa=-2.26 degrees
! Estimated noise=0.579761 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00588572 Jy
! Component: 100  -  total flux cleaned = 0.00920402 Jy
! Component: 150  -  total flux cleaned = 0.0112471 Jy
! Component: 200  -  total flux cleaned = 0.0121343 Jy
! Total flux subtracted in 200 components = 0.0121343 Jy
! Clean residual min=-0.003344 max=0.003343 Jy/beam
! Clean residual mean=-0.000017 rms=0.000771 Jy/beam
! Combined flux in latest and established models = 0.141367 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 69 components and 0.141367 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.986 mas, bmaj=22.06 mas, bpa=2.826 degrees
! Estimated noise=0.722589 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00154407 Jy
! Component: 100  -  total flux cleaned = 0.00168552 Jy
! Component: 150  -  total flux cleaned = 0.00177004 Jy
! Component: 200  -  total flux cleaned = 0.00183885 Jy
! Total flux subtracted in 200 components = 0.00183885 Jy
! Clean residual min=-0.004054 max=0.003135 Jy/beam
! Clean residual mean=-0.000028 rms=0.000908 Jy/beam
! Combined flux in latest and established models = 0.143206 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.3314e-05 Jy
! Component: 100  -  total flux cleaned = 0.00010593 Jy
! Component: 150  -  total flux cleaned = 0.000145647 Jy
! Component: 200  -  total flux cleaned = 0.000183891 Jy
! Total flux subtracted in 200 components = 0.000183891 Jy
! Clean residual min=-0.004020 max=0.003066 Jy/beam
! Clean residual mean=-0.000027 rms=0.000902 Jy/beam
! Combined flux in latest and established models = 0.14339 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 86 components and 0.14339 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.997 mas, bmaj=8.135 mas, bpa=-2.26 degrees
! Estimated noise=0.579761 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000631888 Jy
! Component: 100  -  total flux cleaned = -0.000672847 Jy
! Component: 150  -  total flux cleaned = -0.000743704 Jy
! Component: 200  -  total flux cleaned = -0.00077569 Jy
! Total flux subtracted in 200 components = -0.00077569 Jy
! Clean residual min=-0.003249 max=0.002972 Jy/beam
! Clean residual mean=-0.000015 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.142614 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 99 components and 0.142614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.142768Jy  sigma=1.213680
! Fit after  self-cal, rms=0.142748Jy  sigma=1.213590
wmodel J1524-3012_S_map.mod
! Writing 99 model components to file: J1524-3012_S_map.mod
wobs   J1524-3012_S_uvs.fits
! Writing UV FITS file: J1524-3012_S_uvs.fits
wwins  J1524-3012_S_map.win
! wwins: Wrote 2 windows to J1524-3012_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000429711 Jy
! Component: 100  -  total flux cleaned = -0.000126314 Jy
! Component: 150  -  total flux cleaned = 6.37316e-05 Jy
! Component: 200  -  total flux cleaned = 0.000198063 Jy
! Component: 250  -  total flux cleaned = 0.00045702 Jy
! Component: 300  -  total flux cleaned = 0.000540881 Jy
! Component: 350  -  total flux cleaned = 0.000461495 Jy
! Component: 400  -  total flux cleaned = 0.000383532 Jy
! Component: 450  -  total flux cleaned = 0.000306898 Jy
! Component: 500  -  total flux cleaned = 0.00019434 Jy
! Component: 550  -  total flux cleaned = 0.000120245 Jy
! Component: 600  -  total flux cleaned = -2.45077e-05 Jy
! Component: 650  -  total flux cleaned = -0.000130791 Jy
! Component: 700  -  total flux cleaned = -0.000200208 Jy
! Component: 750  -  total flux cleaned = -0.00030277 Jy
! Component: 800  -  total flux cleaned = -0.00043648 Jy
! Component: 850  -  total flux cleaned = -0.000469351 Jy
! Component: 900  -  total flux cleaned = -0.000534725 Jy
! Component: 950  -  total flux cleaned = -0.000663691 Jy
! Component: 1000  -  total flux cleaned = -0.000790646 Jy
! Component: 1050  -  total flux cleaned = -0.00091638 Jy
! Component: 1100  -  total flux cleaned = -0.000947324 Jy
! Component: 1150  -  total flux cleaned = -0.00109934 Jy
! Component: 1200  -  total flux cleaned = -0.00106898 Jy
! Component: 1250  -  total flux cleaned = -0.00112834 Jy
! Component: 1300  -  total flux cleaned = -0.00121595 Jy
! Component: 1350  -  total flux cleaned = -0.00121575 Jy
! Component: 1400  -  total flux cleaned = -0.00133059 Jy
! Component: 1450  -  total flux cleaned = -0.00135891 Jy
! Component: 1500  -  total flux cleaned = -0.00135897 Jy
! Component: 1550  -  total flux cleaned = -0.00138697 Jy
! Component: 1600  -  total flux cleaned = -0.0014414 Jy
! Component: 1650  -  total flux cleaned = -0.00144146 Jy
! Component: 1700  -  total flux cleaned = -0.00136074 Jy
! Component: 1750  -  total flux cleaned = -0.00138696 Jy
! Component: 1800  -  total flux cleaned = -0.00141287 Jy
! Component: 1850  -  total flux cleaned = -0.00141277 Jy
! Component: 1900  -  total flux cleaned = -0.00138647 Jy
! Component: 1950  -  total flux cleaned = -0.00136094 Jy
! Component: 2000  -  total flux cleaned = -0.00128478 Jy
! Component: 2050  -  total flux cleaned = -0.00131003 Jy
! Component: 2100  -  total flux cleaned = -0.00128492 Jy
! Component: 2150  -  total flux cleaned = -0.00128493 Jy
! Component: 2200  -  total flux cleaned = -0.00126075 Jy
! Component: 2250  -  total flux cleaned = -0.00123666 Jy
! Component: 2300  -  total flux cleaned = -0.00118838 Jy
! Component: 2350  -  total flux cleaned = -0.00121218 Jy
! Component: 2400  -  total flux cleaned = -0.0012119 Jy
! Component: 2450  -  total flux cleaned = -0.00118842 Jy
! Component: 2500  -  total flux cleaned = -0.00118863 Jy
! Component: 2550  -  total flux cleaned = -0.00111946 Jy
! Component: 2600  -  total flux cleaned = -0.00111944 Jy
! Component: 2650  -  total flux cleaned = -0.00107429 Jy
! Component: 2700  -  total flux cleaned = -0.00107453 Jy
! Component: 2750  -  total flux cleaned = -0.00107448 Jy
! Component: 2800  -  total flux cleaned = -0.00116362 Jy
! Component: 2850  -  total flux cleaned = -0.00125179 Jy
! Component: 2900  -  total flux cleaned = -0.00129555 Jy
! Component: 2950  -  total flux cleaned = -0.0012305 Jy
! Component: 3000  -  total flux cleaned = -0.00133867 Jy
! Component: 3050  -  total flux cleaned = -0.00136028 Jy
! Component: 3100  -  total flux cleaned = -0.00144554 Jy
! Component: 3150  -  total flux cleaned = -0.00153028 Jy
! Component: 3200  -  total flux cleaned = -0.0015724 Jy
! Component: 3250  -  total flux cleaned = -0.00155165 Jy
! Component: 3300  -  total flux cleaned = -0.0016763 Jy
! Component: 3350  -  total flux cleaned = -0.00175867 Jy
! Component: 3400  -  total flux cleaned = -0.00188149 Jy
! Component: 3450  -  total flux cleaned = -0.00186092 Jy
! Component: 3500  -  total flux cleaned = -0.00194203 Jy
! Component: 3550  -  total flux cleaned = -0.00202237 Jy
! Component: 3600  -  total flux cleaned = -0.00208255 Jy
! Component: 3650  -  total flux cleaned = -0.00220176 Jy
! Component: 3700  -  total flux cleaned = -0.00224138 Jy
! Component: 3750  -  total flux cleaned = -0.00235921 Jy
! Component: 3800  -  total flux cleaned = -0.00243712 Jy
! Component: 3850  -  total flux cleaned = -0.00251462 Jy
! Component: 3900  -  total flux cleaned = -0.00264943 Jy
! Component: 3950  -  total flux cleaned = -0.00268769 Jy
! Component: 4000  -  total flux cleaned = -0.00278289 Jy
! Component: 4050  -  total flux cleaned = -0.00282087 Jy
! Total flux subtracted in 4096 components = -0.0028962 Jy
! Clean residual min=-0.001225 max=0.001165 Jy/beam
! Clean residual mean=-0.000002 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.139718 Jy
keep
! Adding 280 model components to the UV plane model.
! The established model now contains 379 components and 0.139718 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1524-3012_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.997 x 8.135 at -2.26 degrees (North through East)
! Clean map  min=-0.0025146  max=0.096158 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1524-3012_S_map.fits
wmodel /vlbi/uf001/uva//J1524-3012_S_map.mod
! Writing 379 model components to file: /vlbi/uf001/uva//J1524-3012_S_map.mod
wobs   /vlbi/uf001/uva//J1524-3012_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1524-3012_S_uvs.fits
wwins  /vlbi/uf001/uva//J1524-3012_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J1524-3012_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0961575 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000334643 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.04405 1.04405 2.08809 4.17619 8.35237 16.7047 33.4095 66.819
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.096 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  287.343 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1524-3012_S_dfm.log closed on Mon Jan 14 03:17:27 2019