! Started logfile: /vlbi/uf001/uvm//J1521+4336_X_a_dfm.log on Sun Jan 13 21:52:29 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1521+4336_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1521+4336_X_a_uvm.fits ! AN table 1: 12 integrations on 36 of 36 possible baselines. ! AN table 2: 20 integrations on 45 of 45 possible baselines. ! AN table 3: 7 integrations on 28 of 28 possible baselines. ! AN table 4: 7 integrations on 3 of 3 possible baselines. ! Apparent sampling: 0.77082 visibilities/baseline/integration-bin. ! Found source: J1521+4336 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 14328 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1521+4336_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.037490Jy sigma=21.078127 ! Fit after self-cal, rms=0.699988Jy sigma=14.011885 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7647 mas, bmaj=1.171 mas, bpa=-8.961 degrees ! Estimated noise=0.456145 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.234431 Jy ! Component: 100 - total flux cleaned = 0.287982 Jy ! Total flux subtracted in 100 components = 0.287982 Jy ! Clean residual min=-0.009310 max=0.019612 Jy/beam ! Clean residual mean=0.000005 rms=0.001687 Jy/beam ! Combined flux in latest and established models = 0.287982 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.287982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083379Jy sigma=1.623054 ! Fit after self-cal, rms=0.083373Jy sigma=1.622874 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203575 Jy ! Component: 100 - total flux cleaned = 0.0300549 Jy ! Total flux subtracted in 100 components = 0.0300549 Jy ! Clean residual min=-0.009444 max=0.012615 Jy/beam ! Clean residual mean=0.000001 rms=0.001418 Jy/beam ! Combined flux in latest and established models = 0.318037 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 12 components and 0.318037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078512Jy sigma=1.468827 ! Fit after self-cal, rms=0.078503Jy sigma=1.468471 ! Inverting map ! Added new window around map position (0, 2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102877 Jy ! Component: 100 - total flux cleaned = 0.0141457 Jy ! Total flux subtracted in 100 components = 0.0141457 Jy ! Clean residual min=-0.008918 max=0.009531 Jy/beam ! Clean residual mean=0.000000 rms=0.001348 Jy/beam ! Combined flux in latest and established models = 0.332183 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 17 components and 0.332183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077065Jy sigma=1.430751 ! Fit after self-cal, rms=0.076964Jy sigma=1.428395 ! Inverting map ! Added new window around map position (-1.8, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0079223 Jy ! Component: 100 - total flux cleaned = 0.0118261 Jy ! Total flux subtracted in 100 components = 0.0118261 Jy ! Clean residual min=-0.008211 max=0.008313 Jy/beam ! Clean residual mean=-0.000001 rms=0.001294 Jy/beam ! Combined flux in latest and established models = 0.344009 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.344009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075763Jy sigma=1.398610 ! Fit after self-cal, rms=0.075667Jy sigma=1.396039 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.012 mas, bmaj=1.498 mas, bpa=-8.08 degrees ! Estimated noise=0.302248 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101668 Jy ! Component: 100 - total flux cleaned = 0.0161268 Jy ! Component: 150 - total flux cleaned = 0.018872 Jy ! Component: 200 - total flux cleaned = 0.0208097 Jy ! Total flux subtracted in 200 components = 0.0208097 Jy ! Clean residual min=-0.006856 max=0.006606 Jy/beam ! Clean residual mean=-0.000027 rms=0.001344 Jy/beam ! Combined flux in latest and established models = 0.364818 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 50 components and 0.364818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074020Jy sigma=1.354283 ! Fit after self-cal, rms=0.073989Jy sigma=1.353455 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.012 x 1.498 at -8.08 degrees (North through East) ! Clean map min=-0.006644 max=0.30248 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.99 HN 0.92 KP 0.94 ! LA 1.02 MK 1.00 NL 1.09 OV 0.95 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.12 FD 1.02 HN 0.97 KP 1.07 ! LA 0.87 MK 1.01 NL 1.08 OV 0.92 ! PT 0.98 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.05 HN 0.87 KP 1.09 ! LA 1.08 NL 0.93 OV 0.93 PT 0.94 ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NL 0.00* SC 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 0.93 KP 0.97 ! LA 0.98 MK 1.02 NL 1.13 OV 0.94 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 1.02 HN 0.98 KP 1.08 ! LA 0.87 MK 1.03 NL 1.06 OV 0.93 ! PT 0.97 SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.06 HN 0.89 KP 1.06 ! LA 1.05 NL 0.93 OV 0.94 PT 0.94 ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NL 0.00* SC 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.02 HN 0.97 KP 0.94 ! LA 0.95 MK 1.02 NL 1.09 OV 0.94 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 FD 1.03 HN 0.99 KP 1.08 ! LA 0.85 MK 1.04 NL 1.08 OV 0.92 ! PT 0.99 SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.10 FD 1.02 HN 0.95 KP 1.09 ! LA 1.01 NL 0.93 OV 0.93 PT 0.93 ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NL 0.00* SC 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.99 HN 0.93 KP 0.95 ! LA 0.99 MK 1.02 NL 1.10 OV 0.96 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.15 FD 1.01 HN 0.97 KP 1.10 ! LA 0.85 MK 1.00 NL 1.07 OV 0.91 ! PT 0.97 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.12 HN 0.91 KP 1.08 ! LA 1.06 NL 0.93 OV 0.92 PT 0.95 ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NL 0.00* SC 0.00* ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 0.95 KP 0.94 ! LA 0.99 MK 1.00 NL 1.08 OV 0.92 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 1.00 HN 0.96 KP 1.06 ! LA 0.87 MK 0.99 NL 1.08 OV 0.94 ! PT 1.00 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.07 HN 0.90 KP 1.06 ! LA 1.06 NL 0.93 OV 0.89 PT 1.00 ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NL 0.00* SC 0.00* ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 0.95 KP 0.97 ! LA 0.98 MK 0.99 NL 1.08 OV 0.96 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 FD 1.02 HN 0.96 KP 1.11 ! LA 0.86 MK 1.02 NL 1.08 OV 0.92 ! PT 1.00 SC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.08 HN 0.96 KP 1.10 ! LA 1.03 NL 0.94 OV 0.93 PT 0.95 ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NL 0.00* SC 0.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.01 HN 0.93 KP 0.96 ! LA 0.95 MK 1.01 NL 1.09 OV 0.95 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 FD 1.03 HN 0.98 KP 1.09 ! LA 0.86 MK 1.01 NL 1.09 OV 0.91 ! PT 0.98 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.04 HN 0.90 KP 1.08 ! LA 1.06 NL 0.94 OV 0.95 PT 0.94 ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NL 0.00* SC 0.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.99 HN 0.94 KP 0.96 ! LA 0.96 MK 0.98 NL 1.10 OV 0.98 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 1.02 HN 0.99 KP 1.11 ! LA 0.85 MK 1.04 NL 1.08 OV 0.91 ! PT 1.00 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.11 HN 0.87 KP 1.08 ! LA 1.04 NL 0.95 OV 0.96 PT 0.97 ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NL 0.00* SC 0.00* ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 0.99 KP 0.94 ! LA 0.99 MK 1.02 NL 1.09 OV 0.94 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.16 FD 1.03 HN 0.97 KP 1.07 ! LA 0.87 MK 1.03 NL 1.09 OV 0.92 ! PT 0.97 SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.10 HN 0.90 KP 1.05 ! LA 1.06 NL 0.93 OV 0.97 PT 0.95 ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NL 0.00* SC 0.00* ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 0.99 KP 0.97 ! LA 0.96 MK 1.00 NL 1.08 OV 0.97 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 1.01 HN 1.00 KP 1.08 ! LA 0.87 MK 1.00 NL 1.08 OV 0.91 ! PT 0.98 SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 1.02 HN 0.91 KP 1.09 ! LA 1.08 NL 0.92 OV 0.95 PT 0.96 ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NL 0.00* SC 0.00* ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00 HN 0.95 KP 0.92 ! LA 0.96 MK 1.00 NL 1.08 OV 0.98 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.12 FD 1.02 HN 0.97 KP 1.10 ! LA 0.86 MK 1.04 NL 1.08 OV 0.91 ! PT 0.99 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.10 FD 1.09 HN 0.93 KP 1.10 ! LA 1.05 NL 0.92 OV 0.93 PT 1.00 ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NL 0.00* SC 0.00* ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 0.91 KP 0.98 ! LA 0.97 MK 1.01 NL 1.09 OV 0.95 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 1.04 HN 0.97 KP 1.08 ! LA 0.89 MK 1.03 NL 1.08 OV 0.92 ! PT 0.96 SC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 1.09 HN 0.90 KP 1.06 ! LA 1.05 NL 0.93 OV 0.93 PT 0.97 ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NL 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.073989Jy sigma=1.353455 ! Fit after self-cal, rms=0.067972Jy sigma=1.192161 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.013 mas, bmaj=1.507 mas, bpa=-8.706 degrees ! Estimated noise=0.303611 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00327523 Jy ! Component: 100 - total flux cleaned = -0.00470109 Jy ! Component: 150 - total flux cleaned = -0.00535967 Jy ! Component: 200 - total flux cleaned = -0.00570893 Jy ! Total flux subtracted in 200 components = -0.00570893 Jy ! Clean residual min=-0.003903 max=0.003453 Jy/beam ! Clean residual mean=-0.000020 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.359109 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 70 components and 0.359109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067664Jy sigma=1.186355 ! Fit after self-cal, rms=0.067772Jy sigma=1.185676 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067772Jy sigma=1.185676 ! Fit after self-cal, rms=0.067827Jy sigma=1.088317 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.013 mas, bmaj=1.509 mas, bpa=-7.753 degrees ! Estimated noise=0.304638 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00316465 Jy ! Component: 100 - total flux cleaned = -0.00496048 Jy ! Component: 150 - total flux cleaned = -0.00560586 Jy ! Component: 200 - total flux cleaned = -0.00585242 Jy ! Total flux subtracted in 200 components = -0.00585242 Jy ! Clean residual min=-0.001952 max=0.001635 Jy/beam ! Clean residual mean=-0.000004 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.353257 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 88 components and 0.353257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067643Jy sigma=1.083899 ! Fit after self-cal, rms=0.067766Jy sigma=1.083577 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000367054 Jy ! Component: 100 - total flux cleaned = -0.000489991 Jy ! Component: 150 - total flux cleaned = -0.000562596 Jy ! Component: 200 - total flux cleaned = -0.000561752 Jy ! Total flux subtracted in 200 components = -0.000561752 Jy ! Clean residual min=-0.001810 max=0.001786 Jy/beam ! Clean residual mean=-0.000004 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.352695 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 95 components and 0.352695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067725Jy sigma=1.082632 ! Fit after self-cal, rms=0.067723Jy sigma=1.082606 ! Inverting map ! Added new window around map position (-0.2, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108909 Jy ! Component: 100 - total flux cleaned = 0.00109365 Jy ! Component: 150 - total flux cleaned = 0.00109182 Jy ! Component: 200 - total flux cleaned = 0.00112341 Jy ! Total flux subtracted in 200 components = 0.00112341 Jy ! Clean residual min=-0.001717 max=0.001671 Jy/beam ! Clean residual mean=-0.000003 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.353819 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 109 components and 0.353819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067664Jy sigma=1.081407 ! Fit after self-cal, rms=0.067660Jy sigma=1.081313 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067660Jy sigma=1.081313 ! Fit after self-cal, rms=0.068048Jy sigma=1.080039 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.013 mas, bmaj=1.508 mas, bpa=-7.711 degrees ! Estimated noise=0.304727 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00183111 Jy ! Component: 100 - total flux cleaned = -0.00264602 Jy ! Component: 150 - total flux cleaned = -0.00295495 Jy ! Component: 200 - total flux cleaned = -0.00309035 Jy ! Total flux subtracted in 200 components = -0.00309035 Jy ! Clean residual min=-0.001551 max=0.001570 Jy/beam ! Clean residual mean=-0.000002 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.350728 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 116 components and 0.350728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067977Jy sigma=1.078475 ! Fit after self-cal, rms=0.067987Jy sigma=1.078445 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.08973e-05 Jy ! Component: 100 - total flux cleaned = 1.38948e-06 Jy ! Component: 150 - total flux cleaned = 1.16613e-06 Jy ! Component: 200 - total flux cleaned = -2.44031e-05 Jy ! Total flux subtracted in 200 components = -2.44031e-05 Jy ! Clean residual min=-0.001535 max=0.001560 Jy/beam ! Clean residual mean=-0.000002 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.350704 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 121 components and 0.350704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067962Jy sigma=1.077982 ! Fit after self-cal, rms=0.067961Jy sigma=1.077963 ! Inverting map ! Added new window around map position (10.2, -10.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000886426 Jy ! Component: 100 - total flux cleaned = 0.000824691 Jy ! Component: 150 - total flux cleaned = 0.000694502 Jy ! Component: 200 - total flux cleaned = 0.000605962 Jy ! Total flux subtracted in 200 components = 0.000605962 Jy ! Clean residual min=-0.001613 max=0.001355 Jy/beam ! Clean residual mean=-0.000003 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.35131 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 136 components and 0.35131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067898Jy sigma=1.076898 ! Fit after self-cal, rms=0.067897Jy sigma=1.076840 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067897Jy sigma=1.076840 ! Fit after self-cal, rms=0.068078Jy sigma=1.076282 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.381 mas, bmaj=2.486 mas, bpa=-32.11 degrees ! Estimated noise=0.368095 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135809 Jy ! Component: 100 - total flux cleaned = -0.00178191 Jy ! Component: 150 - total flux cleaned = -0.00188766 Jy ! Component: 200 - total flux cleaned = -0.00193663 Jy ! Total flux subtracted in 200 components = -0.00193663 Jy ! Clean residual min=-0.001676 max=0.001592 Jy/beam ! Clean residual mean=-0.000005 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.349373 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 149 components and 0.349373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068049Jy sigma=1.075717 ! Fit after self-cal, rms=0.068053Jy sigma=1.075695 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.67198e-05 Jy ! Component: 100 - total flux cleaned = -4.68832e-05 Jy ! Component: 150 - total flux cleaned = -4.64532e-05 Jy ! Component: 200 - total flux cleaned = -8.16142e-05 Jy ! Total flux subtracted in 200 components = -8.16142e-05 Jy ! Clean residual min=-0.001652 max=0.001581 Jy/beam ! Clean residual mean=-0.000005 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.349292 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 153 components and 0.349292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068044Jy sigma=1.075518 ! Fit after self-cal, rms=0.068043Jy sigma=1.075508 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.013 mas, bmaj=1.508 mas, bpa=-7.654 degrees ! Estimated noise=0.304775 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.013 x 1.508 at -7.654 degrees (North through East) ! Clean map min=-0.0014352 max=0.30537 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7642 mas, bmaj=1.174 mas, bpa=-8.283 degrees ! Estimated noise=0.462096 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.236856 Jy ! Component: 100 - total flux cleaned = 0.290362 Jy ! Component: 150 - total flux cleaned = 0.309893 Jy ! Component: 200 - total flux cleaned = 0.319487 Jy ! Total flux subtracted in 200 components = 0.319487 Jy ! Clean residual min=-0.002622 max=0.004931 Jy/beam ! Clean residual mean=0.000001 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.319487 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.319487 Jy ! Inverting map and beam ! Estimated beam: bmin=1.013 mas, bmaj=1.508 mas, bpa=-7.654 degrees ! Estimated noise=0.304775 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00847411 Jy ! Component: 100 - total flux cleaned = 0.0137571 Jy ! Component: 150 - total flux cleaned = 0.0174121 Jy ! Component: 200 - total flux cleaned = 0.020213 Jy ! Total flux subtracted in 200 components = 0.020213 Jy ! Clean residual min=-0.001828 max=0.001734 Jy/beam ! Clean residual mean=-0.000005 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.3397 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 37 components and 0.3397 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.381 mas, bmaj=2.486 mas, bpa=-32.11 degrees ! Estimated noise=0.368095 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00318589 Jy ! Component: 100 - total flux cleaned = 0.00536557 Jy ! Component: 150 - total flux cleaned = 0.00666533 Jy ! Component: 200 - total flux cleaned = 0.00723412 Jy ! Total flux subtracted in 200 components = 0.00723412 Jy ! Clean residual min=-0.001770 max=0.001516 Jy/beam ! Clean residual mean=-0.000007 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.346934 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000478105 Jy ! Component: 100 - total flux cleaned = 0.000816379 Jy ! Component: 150 - total flux cleaned = 0.00101671 Jy ! Component: 200 - total flux cleaned = 0.00116554 Jy ! Total flux subtracted in 200 components = 0.00116554 Jy ! Clean residual min=-0.001654 max=0.001464 Jy/beam ! Clean residual mean=-0.000007 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.3481 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 104 components and 0.3481 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.013 mas, bmaj=1.508 mas, bpa=-7.654 degrees ! Estimated noise=0.304775 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000307221 Jy ! Component: 100 - total flux cleaned = 0.00048226 Jy ! Component: 150 - total flux cleaned = 0.000523528 Jy ! Component: 200 - total flux cleaned = 0.000559871 Jy ! Total flux subtracted in 200 components = 0.000559871 Jy ! Clean residual min=-0.001635 max=0.001313 Jy/beam ! Clean residual mean=-0.000003 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.34866 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 118 components and 0.34866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068066Jy sigma=1.076238 ! Fit after self-cal, rms=0.068044Jy sigma=1.075916 wmodel J1521+4336_X_a_map.mod ! Writing 118 model components to file: J1521+4336_X_a_map.mod wobs J1521+4336_X_a_uvs.fits ! Writing UV FITS file: J1521+4336_X_a_uvs.fits wwins J1521+4336_X_a_map.win ! wwins: Wrote 6 windows to J1521+4336_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000538106 Jy ! Component: 100 - total flux cleaned = -0.000538338 Jy ! Component: 150 - total flux cleaned = -0.000419208 Jy ! Component: 200 - total flux cleaned = -0.000395838 Jy ! Component: 250 - total flux cleaned = -0.000213584 Jy ! Component: 300 - total flux cleaned = -7.98023e-05 Jy ! Component: 350 - total flux cleaned = -5.77591e-05 Jy ! Component: 400 - total flux cleaned = 2.93997e-05 Jy ! Component: 450 - total flux cleaned = 0.000114756 Jy ! Component: 500 - total flux cleaned = 0.000135606 Jy ! Component: 550 - total flux cleaned = 0.000219077 Jy ! Component: 600 - total flux cleaned = 0.000260353 Jy ! Component: 650 - total flux cleaned = 0.000239603 Jy ! Component: 700 - total flux cleaned = 0.000158302 Jy ! Component: 750 - total flux cleaned = 0.000158372 Jy ! Component: 800 - total flux cleaned = 0.000138498 Jy ! Component: 850 - total flux cleaned = 0.000118912 Jy ! Component: 900 - total flux cleaned = 0.000118996 Jy ! Component: 950 - total flux cleaned = 0.000138118 Jy ! Component: 1000 - total flux cleaned = 6.11685e-05 Jy ! Component: 1050 - total flux cleaned = 0.000156975 Jy ! Component: 1100 - total flux cleaned = 0.000137982 Jy ! Component: 1150 - total flux cleaned = 0.000194188 Jy ! Component: 1200 - total flux cleaned = 0.000137981 Jy ! Component: 1250 - total flux cleaned = 0.000212233 Jy ! Component: 1300 - total flux cleaned = 0.000138269 Jy ! Component: 1350 - total flux cleaned = 0.000138229 Jy ! Component: 1400 - total flux cleaned = 0.000174779 Jy ! Component: 1450 - total flux cleaned = 0.000120319 Jy ! Component: 1500 - total flux cleaned = 0.000102194 Jy ! Component: 1550 - total flux cleaned = 0.000102105 Jy ! Component: 1600 - total flux cleaned = 1.29019e-05 Jy ! Component: 1650 - total flux cleaned = 1.27833e-05 Jy ! Component: 1700 - total flux cleaned = -4.61932e-06 Jy ! Component: 1750 - total flux cleaned = 1.29823e-05 Jy ! Component: 1800 - total flux cleaned = -2.18854e-05 Jy ! Component: 1850 - total flux cleaned = -7.38836e-05 Jy ! Component: 1900 - total flux cleaned = -2.21299e-05 Jy ! Component: 1950 - total flux cleaned = -5.05824e-06 Jy ! Component: 2000 - total flux cleaned = -3.92092e-05 Jy ! Component: 2050 - total flux cleaned = -5.27899e-06 Jy ! Component: 2100 - total flux cleaned = -2.22697e-05 Jy ! Component: 2150 - total flux cleaned = -2.23061e-05 Jy ! Component: 2200 - total flux cleaned = -5.56406e-05 Jy ! Component: 2250 - total flux cleaned = -7.22585e-05 Jy ! Component: 2300 - total flux cleaned = -2.26743e-05 Jy ! Component: 2350 - total flux cleaned = 5.98036e-05 Jy ! Component: 2400 - total flux cleaned = 1.058e-05 Jy ! Component: 2450 - total flux cleaned = 2.68024e-05 Jy ! Component: 2500 - total flux cleaned = 2.67013e-05 Jy ! Component: 2550 - total flux cleaned = -2.18888e-05 Jy ! Component: 2600 - total flux cleaned = 1.03116e-05 Jy ! Component: 2650 - total flux cleaned = 4.25364e-05 Jy ! Component: 2700 - total flux cleaned = 2.65567e-05 Jy ! Component: 2750 - total flux cleaned = 4.24603e-05 Jy ! Component: 2800 - total flux cleaned = -5.08734e-06 Jy ! Component: 2850 - total flux cleaned = -2.08138e-05 Jy ! Component: 2900 - total flux cleaned = -6.80036e-05 Jy ! Component: 2950 - total flux cleaned = -6.81195e-05 Jy ! Component: 3000 - total flux cleaned = -0.00014604 Jy ! Component: 3050 - total flux cleaned = -0.000161535 Jy ! Component: 3100 - total flux cleaned = -0.000146124 Jy ! Component: 3150 - total flux cleaned = -0.000161517 Jy ! Component: 3200 - total flux cleaned = -0.000176866 Jy ! Component: 3250 - total flux cleaned = -0.000299218 Jy ! Component: 3300 - total flux cleaned = -0.000283952 Jy ! Component: 3350 - total flux cleaned = -0.000283889 Jy ! Component: 3400 - total flux cleaned = -0.000268843 Jy ! Component: 3450 - total flux cleaned = -0.000298957 Jy ! Component: 3500 - total flux cleaned = -0.00034396 Jy ! Component: 3550 - total flux cleaned = -0.000329042 Jy ! Component: 3600 - total flux cleaned = -0.000373855 Jy ! Component: 3650 - total flux cleaned = -0.000314453 Jy ! Component: 3700 - total flux cleaned = -0.000403199 Jy ! Component: 3750 - total flux cleaned = -0.000506365 Jy ! Component: 3800 - total flux cleaned = -0.000462356 Jy ! Component: 3850 - total flux cleaned = -0.000462367 Jy ! Component: 3900 - total flux cleaned = -0.000549824 Jy ! Component: 3950 - total flux cleaned = -0.00047719 Jy ! Component: 4000 - total flux cleaned = -0.000520602 Jy ! Component: 4050 - total flux cleaned = -0.000534977 Jy ! Total flux subtracted in 4096 components = -0.000491848 Jy ! Clean residual min=-0.000924 max=0.000792 Jy/beam ! Clean residual mean=-0.000002 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.348168 Jy keep ! Adding 334 model components to the UV plane model. ! The established model now contains 452 components and 0.348168 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1521+4336_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.013 x 1.508 at -7.654 degrees (North through East) ! Clean map min=-0.0011941 max=0.30631 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1521+4336_X_a_map.fits wmodel /vlbi/uf001/uvm//J1521+4336_X_a_map.mod ! Writing 452 model components to file: /vlbi/uf001/uvm//J1521+4336_X_a_map.mod wobs /vlbi/uf001/uvm//J1521+4336_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1521+4336_X_a_uvs.fits wwins /vlbi/uf001/uvm//J1521+4336_X_a_map.win ! wwins: Wrote 7 windows to /vlbi/uf001/uvm//J1521+4336_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.306309 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000250546 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.245386 0.245386 0.490772 0.981545 1.96309 3.92618 7.85236 15.7047 31.4094 62.8189 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.306 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1222.56 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1521+4336_X_a_dfm.log closed on Sun Jan 13 21:52:35 2019