! Started logfile: /vlbi/uf001/uvm//J1517-2618_S_a_dfm.log on Sun Jan 13 21:52:00 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J1517-2618_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J1517-2618_S_a_uvm.fits
! AN table 1: 38 integrations on 21 of 21 possible baselines.
! AN table 2: 73 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.890218 visibilities/baseline/integration-bin.
! Found source: J1517-2618
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 7590 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1517-2618_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  A total of 49 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  A total of 49 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  A total of 49 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.005781Jy  sigma=16.724146
! Fit after  self-cal, rms=0.904348Jy  sigma=14.940403
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.729 mas, bmaj=14.25 mas, bpa=-19.52 degrees
! Estimated noise=0.823059 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0762119 Jy
! Component: 100  -  total flux cleaned = 0.096302 Jy
! Total flux subtracted in 100 components = 0.096302 Jy
! Clean residual min=-0.007226 max=0.010130 Jy/beam
! Clean residual mean=-0.000097 rms=0.002083 Jy/beam
! Combined flux in latest and established models = 0.096302 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.096302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089590Jy  sigma=1.284009
! Fit after  self-cal, rms=0.089112Jy  sigma=1.277810
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.492 mas, bmaj=15.89 mas, bpa=-18.29 degrees
! Estimated noise=0.51376 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123665 Jy
! Component: 100  -  total flux cleaned = 0.019092 Jy
! Component: 150  -  total flux cleaned = 0.0232027 Jy
! Component: 200  -  total flux cleaned = 0.0258265 Jy
! Total flux subtracted in 200 components = 0.0258265 Jy
! Clean residual min=-0.004699 max=0.004439 Jy/beam
! Clean residual mean=-0.000046 rms=0.001193 Jy/beam
! Combined flux in latest and established models = 0.122128 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 75 components and 0.122128 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087542Jy  sigma=1.241552
! Fit after  self-cal, rms=0.087567Jy  sigma=1.240844
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.492 x 15.89 at -18.29 degrees (North through East)
! Clean map  min=-0.0044474  max=0.097953 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.90     HN        1.07     KP        0.97     LA        0.86     
!   NL        0.97     OV        0.82     PT        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.27     FD        1.05     HN        1.21     KP        1.09     
!   LA        1.09     MK        0.97     NL        1.04     OV        1.00     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.84     HN        1.00     KP        0.94     LA        0.89     
!   NL        0.97     OV        0.77     PT        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.26     FD        1.03     HN        1.10     KP        1.03     
!   LA        1.02     MK        0.97     NL        1.04     OV        1.10     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     HN        0.97     KP        0.96     LA        0.86     
!   NL        0.92     OV        0.81     PT        0.91     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.78     FD        1.04     HN        1.25     KP        1.11     
!   LA        1.06     MK        0.94     NL        1.02     OV        1.05     
! 
! 
! Fit before self-cal, rms=0.087567Jy  sigma=1.240844
! Fit after  self-cal, rms=0.090837Jy  sigma=1.201172
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.556 mas, bmaj=16.07 mas, bpa=-18.41 degrees
! Estimated noise=0.516065 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00130753 Jy
! Component: 100  -  total flux cleaned = -0.00149532 Jy
! Component: 150  -  total flux cleaned = -0.00153209 Jy
! Component: 200  -  total flux cleaned = -0.00156265 Jy
! Total flux subtracted in 200 components = -0.00156265 Jy
! Clean residual min=-0.003224 max=0.003200 Jy/beam
! Clean residual mean=-0.000004 rms=0.000728 Jy/beam
! Combined flux in latest and established models = 0.120566 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 87 components and 0.120566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090786Jy  sigma=1.200488
! Fit after  self-cal, rms=0.090928Jy  sigma=1.200052
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090928Jy  sigma=1.200052
! Fit after  self-cal, rms=0.091773Jy  sigma=1.197678
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.558 mas, bmaj=16.11 mas, bpa=-18.58 degrees
! Estimated noise=0.516006 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000720325 Jy
! Component: 100  -  total flux cleaned = -0.000837363 Jy
! Component: 150  -  total flux cleaned = -0.000910205 Jy
! Component: 200  -  total flux cleaned = -0.00098466 Jy
! Total flux subtracted in 200 components = -0.00098466 Jy
! Clean residual min=-0.003179 max=0.003261 Jy/beam
! Clean residual mean=-0.000003 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.119581 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 98 components and 0.119581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091763Jy  sigma=1.197437
! Fit after  self-cal, rms=0.091773Jy  sigma=1.197374
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-27, 2.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00189782 Jy
! Component: 100  -  total flux cleaned = 0.00267056 Jy
! Component: 150  -  total flux cleaned = 0.00282351 Jy
! Component: 200  -  total flux cleaned = 0.00273883 Jy
! Total flux subtracted in 200 components = 0.00273883 Jy
! Clean residual min=-0.002548 max=0.002039 Jy/beam
! Clean residual mean=0.000002 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.12232 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 133 components and 0.12232 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091661Jy  sigma=1.195171
! Fit after  self-cal, rms=0.091648Jy  sigma=1.194905
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091648Jy  sigma=1.194905
! Fit after  self-cal, rms=0.092083Jy  sigma=1.194281
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.566 mas, bmaj=16.13 mas, bpa=-18.63 degrees
! Estimated noise=0.514738 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000965714 Jy
! Component: 100  -  total flux cleaned = 0.00113381 Jy
! Component: 150  -  total flux cleaned = 0.00106003 Jy
! Component: 200  -  total flux cleaned = 0.000925768 Jy
! Total flux subtracted in 200 components = 0.000925768 Jy
! Clean residual min=-0.002350 max=0.001916 Jy/beam
! Clean residual mean=0.000000 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 0.123246 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 166 components and 0.123246 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092044Jy  sigma=1.193596
! Fit after  self-cal, rms=0.092046Jy  sigma=1.193525
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000130816 Jy
! Component: 100  -  total flux cleaned = 5.39014e-06 Jy
! Component: 150  -  total flux cleaned = -8.14765e-05 Jy
! Component: 200  -  total flux cleaned = -0.00013557 Jy
! Total flux subtracted in 200 components = -0.00013557 Jy
! Clean residual min=-0.002315 max=0.001923 Jy/beam
! Clean residual mean=0.000000 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.12311 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 182 components and 0.12311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092028Jy  sigma=1.193185
! Fit after  self-cal, rms=0.092024Jy  sigma=1.193171
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092024Jy  sigma=1.193171
! Fit after  self-cal, rms=0.091851Jy  sigma=1.193073
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.794 mas, bmaj=27.46 mas, bpa=-7.045 degrees
! Estimated noise=0.589243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000494845 Jy
! Component: 100  -  total flux cleaned = 0.000472059 Jy
! Component: 150  -  total flux cleaned = 0.000430564 Jy
! Component: 200  -  total flux cleaned = 0.000338215 Jy
! Total flux subtracted in 200 components = 0.000338215 Jy
! Clean residual min=-0.002115 max=0.001783 Jy/beam
! Clean residual mean=-0.000002 rms=0.000557 Jy/beam
! Combined flux in latest and established models = 0.123448 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 207 components and 0.123448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091843Jy  sigma=1.192875
! Fit after  self-cal, rms=0.091833Jy  sigma=1.192851
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.86449e-06 Jy
! Component: 100  -  total flux cleaned = -9.17372e-05 Jy
! Component: 150  -  total flux cleaned = -0.000172836 Jy
! Component: 200  -  total flux cleaned = -0.000249013 Jy
! Total flux subtracted in 200 components = -0.000249013 Jy
! Clean residual min=-0.002043 max=0.001766 Jy/beam
! Clean residual mean=-0.000002 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.123199 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 227 components and 0.123199 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091828Jy  sigma=1.192749
! Fit after  self-cal, rms=0.091825Jy  sigma=1.192743
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.567 mas, bmaj=16.14 mas, bpa=-18.63 degrees
! Estimated noise=0.513922 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.567 x 16.14 at -18.63 degrees (North through East)
! Clean map  min=-0.0022746  max=0.09845 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.792 mas, bmaj=14.48 mas, bpa=-19.78 degrees
! Estimated noise=0.815318 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0759263 Jy
! Component: 100  -  total flux cleaned = 0.0946538 Jy
! Component: 150  -  total flux cleaned = 0.103637 Jy
! Component: 200  -  total flux cleaned = 0.109481 Jy
! Total flux subtracted in 200 components = 0.109481 Jy
! Clean residual min=-0.004603 max=0.004584 Jy/beam
! Clean residual mean=-0.000024 rms=0.001072 Jy/beam
! Combined flux in latest and established models = 0.109481 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 39 model components to the UV plane model.
! The established model now contains 39 components and 0.109481 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.567 mas, bmaj=16.14 mas, bpa=-18.63 degrees
! Estimated noise=0.513922 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00541711 Jy
! Component: 100  -  total flux cleaned = 0.00785693 Jy
! Component: 150  -  total flux cleaned = 0.0098734 Jy
! Component: 200  -  total flux cleaned = 0.0111236 Jy
! Total flux subtracted in 200 components = 0.0111236 Jy
! Clean residual min=-0.002684 max=0.002228 Jy/beam
! Clean residual mean=-0.000006 rms=0.000607 Jy/beam
! Combined flux in latest and established models = 0.120604 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 64 components and 0.120604 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.794 mas, bmaj=27.46 mas, bpa=-7.045 degrees
! Estimated noise=0.589243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00175029 Jy
! Component: 100  -  total flux cleaned = 0.00215161 Jy
! Component: 150  -  total flux cleaned = 0.00223798 Jy
! Component: 200  -  total flux cleaned = 0.00234688 Jy
! Total flux subtracted in 200 components = 0.00234688 Jy
! Clean residual min=-0.002586 max=0.001787 Jy/beam
! Clean residual mean=-0.000004 rms=0.000581 Jy/beam
! Combined flux in latest and established models = 0.122951 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.81426e-07 Jy
! Component: 100  -  total flux cleaned = 8.86985e-08 Jy
! Component: 150  -  total flux cleaned = -7.775e-05 Jy
! Component: 200  -  total flux cleaned = -0.000101881 Jy
! Total flux subtracted in 200 components = -0.000101881 Jy
! Clean residual min=-0.002385 max=0.001737 Jy/beam
! Clean residual mean=-0.000003 rms=0.000561 Jy/beam
! Combined flux in latest and established models = 0.122849 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 117 components and 0.122849 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.567 mas, bmaj=16.14 mas, bpa=-18.63 degrees
! Estimated noise=0.513922 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000360647 Jy
! Component: 100  -  total flux cleaned = -0.000280951 Jy
! Component: 150  -  total flux cleaned = -0.000134592 Jy
! Component: 200  -  total flux cleaned = 1.37209e-06 Jy
! Total flux subtracted in 200 components = 1.37209e-06 Jy
! Clean residual min=-0.002225 max=0.001799 Jy/beam
! Clean residual mean=-0.000002 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.122851 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 133 components and 0.122851 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091861Jy  sigma=1.193397
! Fit after  self-cal, rms=0.091853Jy  sigma=1.193313
wmodel J1517-2618_S_a_map.mod
! Writing 133 model components to file: J1517-2618_S_a_map.mod
wobs   J1517-2618_S_a_uvs.fits
! Writing UV FITS file: J1517-2618_S_a_uvs.fits
wwins  J1517-2618_S_a_map.win
! wwins: Wrote 2 windows to J1517-2618_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000929389 Jy
! Component: 100  -  total flux cleaned = -0.00158049 Jy
! Component: 150  -  total flux cleaned = -0.00199289 Jy
! Component: 200  -  total flux cleaned = -0.00223443 Jy
! Component: 250  -  total flux cleaned = -0.00246525 Jy
! Component: 300  -  total flux cleaned = -0.00260473 Jy
! Component: 350  -  total flux cleaned = -0.00263164 Jy
! Component: 400  -  total flux cleaned = -0.00270962 Jy
! Component: 450  -  total flux cleaned = -0.00281107 Jy
! Component: 500  -  total flux cleaned = -0.00295802 Jy
! Component: 550  -  total flux cleaned = -0.0030297 Jy
! Component: 600  -  total flux cleaned = -0.00309971 Jy
! Component: 650  -  total flux cleaned = -0.00319069 Jy
! Component: 700  -  total flux cleaned = -0.00325748 Jy
! Component: 750  -  total flux cleaned = -0.00323568 Jy
! Component: 800  -  total flux cleaned = -0.00317185 Jy
! Component: 850  -  total flux cleaned = -0.00315125 Jy
! Component: 900  -  total flux cleaned = -0.00317123 Jy
! Component: 950  -  total flux cleaned = -0.00309084 Jy
! Component: 1000  -  total flux cleaned = -0.00311086 Jy
! Component: 1050  -  total flux cleaned = -0.00313042 Jy
! Component: 1100  -  total flux cleaned = -0.00313047 Jy
! Component: 1150  -  total flux cleaned = -0.00314933 Jy
! Component: 1200  -  total flux cleaned = -0.00309368 Jy
! Component: 1250  -  total flux cleaned = -0.00314851 Jy
! Component: 1300  -  total flux cleaned = -0.00307625 Jy
! Component: 1350  -  total flux cleaned = -0.00312985 Jy
! Component: 1400  -  total flux cleaned = -0.0031124 Jy
! Component: 1450  -  total flux cleaned = -0.00314705 Jy
! Component: 1500  -  total flux cleaned = -0.00316405 Jy
! Component: 1550  -  total flux cleaned = -0.00314709 Jy
! Component: 1600  -  total flux cleaned = -0.00318042 Jy
! Component: 1650  -  total flux cleaned = -0.00316359 Jy
! Component: 1700  -  total flux cleaned = -0.00314689 Jy
! Component: 1750  -  total flux cleaned = -0.00314676 Jy
! Component: 1800  -  total flux cleaned = -0.00311468 Jy
! Component: 1850  -  total flux cleaned = -0.00314663 Jy
! Component: 1900  -  total flux cleaned = -0.00313117 Jy
! Component: 1950  -  total flux cleaned = -0.00313143 Jy
! Component: 2000  -  total flux cleaned = -0.00316234 Jy
! Component: 2050  -  total flux cleaned = -0.00317767 Jy
! Component: 2100  -  total flux cleaned = -0.00323832 Jy
! Component: 2150  -  total flux cleaned = -0.00322345 Jy
! Component: 2200  -  total flux cleaned = -0.00331276 Jy
! Component: 2250  -  total flux cleaned = -0.00338613 Jy
! Component: 2300  -  total flux cleaned = -0.00338638 Jy
! Component: 2350  -  total flux cleaned = -0.00345826 Jy
! Component: 2400  -  total flux cleaned = -0.00345843 Jy
! Component: 2450  -  total flux cleaned = -0.00351514 Jy
! Component: 2500  -  total flux cleaned = -0.00359942 Jy
! Component: 2550  -  total flux cleaned = -0.0036968 Jy
! Component: 2600  -  total flux cleaned = -0.00371048 Jy
! Component: 2650  -  total flux cleaned = -0.00377888 Jy
! Component: 2700  -  total flux cleaned = -0.00383295 Jy
! Component: 2750  -  total flux cleaned = -0.0038999 Jy
! Component: 2800  -  total flux cleaned = -0.00392636 Jy
! Component: 2850  -  total flux cleaned = -0.00405814 Jy
! Component: 2900  -  total flux cleaned = -0.00408407 Jy
! Component: 2950  -  total flux cleaned = -0.00414866 Jy
! Component: 3000  -  total flux cleaned = -0.00421297 Jy
! Component: 3050  -  total flux cleaned = -0.00421297 Jy
! Component: 3100  -  total flux cleaned = -0.00423846 Jy
! Component: 3150  -  total flux cleaned = -0.00431365 Jy
! Component: 3200  -  total flux cleaned = -0.00437555 Jy
! Component: 3250  -  total flux cleaned = -0.00441239 Jy
! Component: 3300  -  total flux cleaned = -0.00444913 Jy
! Component: 3350  -  total flux cleaned = -0.00446129 Jy
! Component: 3400  -  total flux cleaned = -0.00452161 Jy
! Component: 3450  -  total flux cleaned = -0.00455739 Jy
! Component: 3500  -  total flux cleaned = -0.00462864 Jy
! Component: 3550  -  total flux cleaned = -0.00466391 Jy
! Component: 3600  -  total flux cleaned = -0.00468708 Jy
! Component: 3650  -  total flux cleaned = -0.00473348 Jy
! Component: 3700  -  total flux cleaned = -0.00475667 Jy
! Component: 3750  -  total flux cleaned = -0.00477949 Jy
! Component: 3800  -  total flux cleaned = -0.00479097 Jy
! Component: 3850  -  total flux cleaned = -0.00482489 Jy
! Component: 3900  -  total flux cleaned = -0.0048362 Jy
! Component: 3950  -  total flux cleaned = -0.004825 Jy
! Component: 4000  -  total flux cleaned = -0.00491406 Jy
! Component: 4050  -  total flux cleaned = -0.00492506 Jy
! Total flux subtracted in 4096 components = -0.00492508 Jy
! Clean residual min=-0.000799 max=0.000652 Jy/beam
! Clean residual mean=-0.000005 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.117926 Jy
keep
! Adding 266 model components to the UV plane model.
! The established model now contains 399 components and 0.117926 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J1517-2618_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.567 x 16.14 at -18.63 degrees (North through East)
! Clean map  min=-0.0017948  max=0.099034 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J1517-2618_S_a_map.fits
wmodel /vlbi/uf001/uvm//J1517-2618_S_a_map.mod
! Writing 399 model components to file: /vlbi/uf001/uvm//J1517-2618_S_a_map.mod
wobs   /vlbi/uf001/uvm//J1517-2618_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J1517-2618_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J1517-2618_S_a_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uvm//J1517-2618_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0990338 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000209528 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.634716 0.634716 1.26943 2.53886 5.07772 10.1554 20.3109 40.6218 81.2436
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.099 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  472.652 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J1517-2618_S_a_dfm.log closed on Sun Jan 13 21:52:04 2019