! Started logfile: /vlbi/uf001/uva//J1516+0015_X_dfm.log on Mon Jan 14 03:15:20 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1516+0015_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1516+0015_X_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.945503 visibilities/baseline/integration-bin. ! Found source: J1516+0015 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 21444 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1516+0015_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.169208Jy sigma=22.169271 ! Fit after self-cal, rms=0.471833Jy sigma=9.181236 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6837 mas, bmaj=1.695 mas, bpa=-1.596 degrees ! Estimated noise=0.409358 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.402946 Jy ! Component: 100 - total flux cleaned = 0.530048 Jy ! Total flux subtracted in 100 components = 0.530048 Jy ! Clean residual min=-0.021220 max=0.051555 Jy/beam ! Clean residual mean=-0.000000 rms=0.004156 Jy/beam ! Combined flux in latest and established models = 0.530048 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.530048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.133718Jy sigma=2.429706 ! Fit after self-cal, rms=0.133558Jy sigma=2.427016 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0521606 Jy ! Component: 100 - total flux cleaned = 0.0760693 Jy ! Total flux subtracted in 100 components = 0.0760693 Jy ! Clean residual min=-0.018188 max=0.037825 Jy/beam ! Clean residual mean=-0.000004 rms=0.003157 Jy/beam ! Combined flux in latest and established models = 0.606117 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 17 components and 0.606118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103005Jy sigma=1.885256 ! Fit after self-cal, rms=0.102910Jy sigma=1.883686 ! Inverting map ! Added new window around map position (-1.2, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0331048 Jy ! Component: 100 - total flux cleaned = 0.0501792 Jy ! Total flux subtracted in 100 components = 0.0501792 Jy ! Clean residual min=-0.014975 max=0.017627 Jy/beam ! Clean residual mean=-0.000003 rms=0.002521 Jy/beam ! Combined flux in latest and established models = 0.656297 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 22 components and 0.656297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088265Jy sigma=1.626122 ! Fit after self-cal, rms=0.087123Jy sigma=1.599675 ! Inverting map ! Added new window around map position (-6.4, 9.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164771 Jy ! Component: 100 - total flux cleaned = 0.0234618 Jy ! Total flux subtracted in 100 components = 0.0234618 Jy ! Clean residual min=-0.013755 max=0.014594 Jy/beam ! Clean residual mean=-0.000003 rms=0.002276 Jy/beam ! Combined flux in latest and established models = 0.679759 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 32 components and 0.679759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082493Jy sigma=1.514658 ! Fit after self-cal, rms=0.082319Jy sigma=1.509728 ! Inverting map ! Added new window around map position (1.2, 2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145836 Jy ! Component: 100 - total flux cleaned = 0.0224431 Jy ! Total flux subtracted in 100 components = 0.0224431 Jy ! Clean residual min=-0.012984 max=0.014118 Jy/beam ! Clean residual mean=-0.000002 rms=0.002091 Jy/beam ! Combined flux in latest and established models = 0.702202 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 45 components and 0.702202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078982Jy sigma=1.447387 ! Fit after self-cal, rms=0.078881Jy sigma=1.444004 ! Inverting map ! Added new window around map position (-2.8, 5.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134934 Jy ! Component: 100 - total flux cleaned = 0.0208068 Jy ! Total flux subtracted in 100 components = 0.0208068 Jy ! Clean residual min=-0.012061 max=0.011106 Jy/beam ! Clean residual mean=-0.000003 rms=0.001928 Jy/beam ! Combined flux in latest and established models = 0.723008 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 0.723008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075302Jy sigma=1.383441 ! Fit after self-cal, rms=0.075260Jy sigma=1.382246 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8245 mas, bmaj=1.959 mas, bpa=-0.3548 degrees ! Estimated noise=0.28064 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128769 Jy ! Component: 100 - total flux cleaned = 0.0229034 Jy ! Component: 150 - total flux cleaned = 0.0313457 Jy ! Component: 200 - total flux cleaned = 0.0385715 Jy ! Total flux subtracted in 200 components = 0.0385715 Jy ! Clean residual min=-0.011602 max=0.013617 Jy/beam ! Clean residual mean=-0.000002 rms=0.002316 Jy/beam ! Combined flux in latest and established models = 0.76158 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 75 components and 0.76158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071550Jy sigma=1.316970 ! Fit after self-cal, rms=0.071478Jy sigma=1.315081 ! Inverting map ! Added new window around map position (0.6, -47.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117286 Jy ! Component: 100 - total flux cleaned = 0.0188178 Jy ! Component: 150 - total flux cleaned = 0.0249536 Jy ! Component: 200 - total flux cleaned = 0.0299583 Jy ! Total flux subtracted in 200 components = 0.0299583 Jy ! Clean residual min=-0.010385 max=0.011560 Jy/beam ! Clean residual mean=-0.000002 rms=0.002055 Jy/beam ! Combined flux in latest and established models = 0.791538 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 111 components and 0.791538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068974Jy sigma=1.266207 ! Fit after self-cal, rms=0.068788Jy sigma=1.262991 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8245 x 1.959 at -0.3548 degrees (North through East) ! Clean map min=-0.010015 max=0.51712 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 0.96 KP 1.04 ! LA 0.95 MK 1.00 NL 1.10 OV 0.96 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 0.97 KP 1.05 ! LA 0.94 MK 1.00 NL 1.09 OV 0.95 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HN 0.96 KP 1.05 ! LA 0.95 MK 1.00 NL 1.07 OV 0.94 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 0.96 KP 1.05 ! LA 0.94 MK 1.01 NL 1.07 OV 0.93 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 0.96 KP 1.04 ! LA 0.94 MK 0.99 NL 1.06 OV 0.95 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 0.97 KP 1.03 ! LA 0.95 MK 1.01 NL 1.07 OV 0.95 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.05 HN 0.96 KP 1.05 ! LA 0.95 MK 1.01 NL 1.05 OV 0.94 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 0.97 KP 1.04 ! LA 0.95 MK 1.02 NL 1.05 OV 0.94 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.96 KP 1.03 ! LA 0.95 MK 1.01 NL 1.06 OV 0.93 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 0.96 KP 1.04 ! LA 0.95 MK 1.01 NL 1.06 OV 0.94 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 0.96 KP 1.03 ! LA 0.95 MK 1.03 NL 1.07 OV 0.93 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.96 KP 1.04 ! LA 0.95 MK 1.01 NL 1.07 OV 0.93 ! PT 0.97 SC 0.99 ! ! ! Fit before self-cal, rms=0.068788Jy sigma=1.262991 ! Fit after self-cal, rms=0.059769Jy sigma=1.097810 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8249 mas, bmaj=1.968 mas, bpa=-0.2933 degrees ! Estimated noise=0.280213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.6, 4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00462258 Jy ! Component: 100 - total flux cleaned = 0.00661215 Jy ! Component: 150 - total flux cleaned = 0.0073019 Jy ! Component: 200 - total flux cleaned = 0.00797076 Jy ! Total flux subtracted in 200 components = 0.00797076 Jy ! Clean residual min=-0.004223 max=0.005701 Jy/beam ! Clean residual mean=-0.000003 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.799509 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 140 components and 0.799509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058491Jy sigma=1.073518 ! Fit after self-cal, rms=0.058460Jy sigma=1.072631 ! Inverting map ! Added new window around map position (-0.4, 5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038099 Jy ! Component: 100 - total flux cleaned = 0.00478905 Jy ! Component: 150 - total flux cleaned = 0.0051107 Jy ! Component: 200 - total flux cleaned = 0.00569775 Jy ! Total flux subtracted in 200 components = 0.00569775 Jy ! Clean residual min=-0.004083 max=0.003993 Jy/beam ! Clean residual mean=-0.000003 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.805207 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 163 components and 0.805207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057910Jy sigma=1.062108 ! Fit after self-cal, rms=0.057893Jy sigma=1.061883 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057893Jy sigma=1.061883 ! Fit after self-cal, rms=0.056961Jy sigma=1.047658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8242 mas, bmaj=1.969 mas, bpa=-0.2528 degrees ! Estimated noise=0.279518 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00179016 Jy ! Component: 100 - total flux cleaned = -0.00215591 Jy ! Component: 150 - total flux cleaned = -0.00197199 Jy ! Component: 200 - total flux cleaned = -0.00163965 Jy ! Total flux subtracted in 200 components = -0.00163965 Jy ! Clean residual min=-0.003652 max=0.003466 Jy/beam ! Clean residual mean=-0.000002 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.803567 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 176 components and 0.803567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056571Jy sigma=1.040001 ! Fit after self-cal, rms=0.056553Jy sigma=1.039763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000182155 Jy ! Component: 100 - total flux cleaned = 0.000186715 Jy ! Component: 150 - total flux cleaned = 0.000725723 Jy ! Component: 200 - total flux cleaned = 0.0011617 Jy ! Total flux subtracted in 200 components = 0.0011617 Jy ! Clean residual min=-0.003545 max=0.003250 Jy/beam ! Clean residual mean=-0.000002 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.804729 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 186 components and 0.804729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056401Jy sigma=1.036798 ! Fit after self-cal, rms=0.056394Jy sigma=1.036728 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056394Jy sigma=1.036728 ! Fit after self-cal, rms=0.056095Jy sigma=1.033720 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8232 mas, bmaj=1.969 mas, bpa=-0.2196 degrees ! Estimated noise=0.279022 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.002162 Jy ! Component: 100 - total flux cleaned = -0.0028324 Jy ! Component: 150 - total flux cleaned = -0.00276419 Jy ! Component: 200 - total flux cleaned = -0.00264233 Jy ! Total flux subtracted in 200 components = -0.00264233 Jy ! Clean residual min=-0.003347 max=0.003155 Jy/beam ! Clean residual mean=-0.000001 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.802086 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 190 components and 0.802086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055893Jy sigma=1.029728 ! Fit after self-cal, rms=0.055881Jy sigma=1.029595 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.33066e-05 Jy ! Component: 100 - total flux cleaned = 6.91651e-05 Jy ! Component: 150 - total flux cleaned = 0.000221001 Jy ! Component: 200 - total flux cleaned = 0.000363058 Jy ! Total flux subtracted in 200 components = 0.000363058 Jy ! Clean residual min=-0.003218 max=0.002899 Jy/beam ! Clean residual mean=-0.000001 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.802449 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 197 components and 0.802449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055795Jy sigma=1.027934 ! Fit after self-cal, rms=0.055791Jy sigma=1.027898 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055791Jy sigma=1.027898 ! Fit after self-cal, rms=0.055645Jy sigma=1.026724 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.093 mas, bmaj=3.309 mas, bpa=4.225 degrees ! Estimated noise=0.373635 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000535737 Jy ! Component: 100 - total flux cleaned = 0.00077681 Jy ! Component: 150 - total flux cleaned = 0.0008963 Jy ! Component: 200 - total flux cleaned = 0.000941659 Jy ! Total flux subtracted in 200 components = 0.000941659 Jy ! Clean residual min=-0.003063 max=0.004239 Jy/beam ! Clean residual mean=-0.000003 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.803391 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 213 components and 0.803391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055588Jy sigma=1.025780 ! Fit after self-cal, rms=0.055574Jy sigma=1.025544 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-25.4, 34.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00415941 Jy ! Component: 100 - total flux cleaned = 0.00625302 Jy ! Component: 150 - total flux cleaned = 0.00715714 Jy ! Component: 200 - total flux cleaned = 0.00753082 Jy ! Total flux subtracted in 200 components = 0.00753082 Jy ! Clean residual min=-0.002523 max=0.002722 Jy/beam ! Clean residual mean=-0.000001 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.810922 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 264 components and 0.810922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055375Jy sigma=1.022459 ! Fit after self-cal, rms=0.055359Jy sigma=1.022264 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8225 mas, bmaj=1.969 mas, bpa=-0.2044 degrees ! Estimated noise=0.278703 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8225 x 1.969 at -0.2044 degrees (North through East) ! Clean map min=-0.0026574 max=0.516 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055359Jy sigma=1.022264 ! Fit after self-cal, rms=0.052292Jy sigma=0.955784 ! Inverting map and beam ! Estimated beam: bmin=0.8227 mas, bmaj=1.969 mas, bpa=-0.2026 degrees ! Estimated noise=0.278605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.90541e-06 Jy ! Component: 100 - total flux cleaned = -0.00015067 Jy ! Component: 150 - total flux cleaned = -0.000276747 Jy ! Component: 200 - total flux cleaned = -0.000503651 Jy ! Total flux subtracted in 200 components = -0.000503651 Jy ! Clean residual min=-0.002711 max=0.002169 Jy/beam ! Clean residual mean=-0.000000 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.810418 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 283 components and 0.810418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052135Jy sigma=0.952823 ! Fit after self-cal, rms=0.052128Jy sigma=0.952761 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.89783e-05 Jy ! Component: 100 - total flux cleaned = -0.00011042 Jy ! Component: 150 - total flux cleaned = -0.000160395 Jy ! Component: 200 - total flux cleaned = -0.000206033 Jy ! Total flux subtracted in 200 components = -0.000206033 Jy ! Clean residual min=-0.002555 max=0.002076 Jy/beam ! Clean residual mean=-0.000000 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.810212 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 297 components and 0.810212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052046Jy sigma=0.951220 ! Fit after self-cal, rms=0.052045Jy sigma=0.951204 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052045Jy sigma=0.951204 ! Fit after self-cal, rms=0.051995Jy sigma=0.950809 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6812 mas, bmaj=1.701 mas, bpa=-1.433 degrees ! Estimated noise=0.407879 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.401389 Jy ! Component: 100 - total flux cleaned = 0.530184 Jy ! Component: 150 - total flux cleaned = 0.58863 Jy ! Component: 200 - total flux cleaned = 0.621042 Jy ! Total flux subtracted in 200 components = 0.621042 Jy ! Clean residual min=-0.008404 max=0.016722 Jy/beam ! Clean residual mean=-0.000000 rms=0.001917 Jy/beam ! Combined flux in latest and established models = 0.621042 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.621042 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8225 mas, bmaj=1.97 mas, bpa=-0.1964 degrees ! Estimated noise=0.278441 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0303331 Jy ! Component: 100 - total flux cleaned = 0.0517872 Jy ! Component: 150 - total flux cleaned = 0.0682705 Jy ! Component: 200 - total flux cleaned = 0.0815023 Jy ! Total flux subtracted in 200 components = 0.0815023 Jy ! Clean residual min=-0.005323 max=0.008115 Jy/beam ! Clean residual mean=-0.000002 rms=0.001609 Jy/beam ! Combined flux in latest and established models = 0.702544 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 46 components and 0.702544 Jy ! Inverting map ! Added new window around map position (-5.2, 8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010983 Jy ! Component: 100 - total flux cleaned = 0.0202338 Jy ! Component: 150 - total flux cleaned = 0.0280727 Jy ! Component: 200 - total flux cleaned = 0.0348203 Jy ! Total flux subtracted in 200 components = 0.0348203 Jy ! Clean residual min=-0.004233 max=0.004931 Jy/beam ! Clean residual mean=-0.000002 rms=0.001086 Jy/beam ! Combined flux in latest and established models = 0.737365 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 85 components and 0.737365 Jy ! Inverting map ! Added new window around map position (-7.6, 12.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00602188 Jy ! Component: 100 - total flux cleaned = 0.0113236 Jy ! Component: 150 - total flux cleaned = 0.0161019 Jy ! Component: 200 - total flux cleaned = 0.0204296 Jy ! Total flux subtracted in 200 components = 0.0204296 Jy ! Clean residual min=-0.003551 max=0.003741 Jy/beam ! Clean residual mean=-0.000001 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.757794 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 121 components and 0.757794 Jy ! Inverting map ! Added new window around map position (-15.6, 23.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00430709 Jy ! Component: 100 - total flux cleaned = 0.00795747 Jy ! Component: 150 - total flux cleaned = 0.0113034 Jy ! Component: 200 - total flux cleaned = 0.014392 Jy ! Total flux subtracted in 200 components = 0.014392 Jy ! Clean residual min=-0.002925 max=0.003093 Jy/beam ! Clean residual mean=-0.000001 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.772186 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 164 components and 0.772186 Jy ! Inverting map ! Added new window around map position (-13, 17.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0033308 Jy ! Component: 100 - total flux cleaned = 0.00604303 Jy ! Component: 150 - total flux cleaned = 0.00853348 Jy ! Component: 200 - total flux cleaned = 0.0108366 Jy ! Total flux subtracted in 200 components = 0.0108366 Jy ! Clean residual min=-0.002526 max=0.002602 Jy/beam ! Clean residual mean=-0.000001 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.783023 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 201 components and 0.783023 Jy ! Inverting map ! Added new window around map position (-1.2, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0027939 Jy ! Component: 100 - total flux cleaned = 0.00495123 Jy ! Component: 150 - total flux cleaned = 0.00691897 Jy ! Component: 200 - total flux cleaned = 0.00858808 Jy ! Total flux subtracted in 200 components = 0.00858808 Jy ! Clean residual min=-0.002269 max=0.002118 Jy/beam ! Clean residual mean=-0.000001 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.791611 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 221 components and 0.791611 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.093 mas, bmaj=3.31 mas, bpa=4.251 degrees ! Estimated noise=0.373355 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311588 Jy ! Component: 100 - total flux cleaned = 0.00568168 Jy ! Component: 150 - total flux cleaned = 0.00786785 Jy ! Component: 200 - total flux cleaned = 0.009746 Jy ! Total flux subtracted in 200 components = 0.009746 Jy ! Clean residual min=-0.002330 max=0.002212 Jy/beam ! Clean residual mean=-0.000001 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.801357 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157928 Jy ! Component: 100 - total flux cleaned = 0.00280602 Jy ! Component: 150 - total flux cleaned = 0.00375009 Jy ! Component: 200 - total flux cleaned = 0.00455505 Jy ! Total flux subtracted in 200 components = 0.00455505 Jy ! Clean residual min=-0.001979 max=0.001758 Jy/beam ! Clean residual mean=-0.000001 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.805912 Jy ! Adding 113 model components to the UV plane model. ! The established model now contains 316 components and 0.805912 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8225 mas, bmaj=1.97 mas, bpa=-0.1964 degrees ! Estimated noise=0.278441 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104186 Jy ! Component: 100 - total flux cleaned = 0.000364755 Jy ! Component: 150 - total flux cleaned = 0.00074631 Jy ! Component: 200 - total flux cleaned = 0.00113594 Jy ! Total flux subtracted in 200 components = 0.00113594 Jy ! Clean residual min=-0.002105 max=0.001567 Jy/beam ! Clean residual mean=-0.000000 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.807048 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 337 components and 0.807048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051533Jy sigma=0.942261 ! Fit after self-cal, rms=0.051481Jy sigma=0.941253 wmodel J1516+0015_X_map.mod ! Writing 337 model components to file: J1516+0015_X_map.mod wobs J1516+0015_X_uvs.fits ! Writing UV FITS file: J1516+0015_X_uvs.fits wwins J1516+0015_X_map.win ! wwins: Wrote 14 windows to J1516+0015_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000751068 Jy ! Component: 100 - total flux cleaned = -0.000886907 Jy ! Component: 150 - total flux cleaned = -0.00101558 Jy ! Component: 200 - total flux cleaned = -0.00108931 Jy ! Component: 250 - total flux cleaned = -0.00113701 Jy ! Component: 300 - total flux cleaned = -0.00115969 Jy ! Component: 350 - total flux cleaned = -0.00124915 Jy ! Component: 400 - total flux cleaned = -0.00124875 Jy ! Component: 450 - total flux cleaned = -0.00137857 Jy ! Component: 500 - total flux cleaned = -0.00144185 Jy ! Component: 550 - total flux cleaned = -0.00152531 Jy ! Component: 600 - total flux cleaned = -0.00156639 Jy ! Component: 650 - total flux cleaned = -0.0016275 Jy ! Component: 700 - total flux cleaned = -0.00172732 Jy ! Component: 750 - total flux cleaned = -0.00178683 Jy ! Component: 800 - total flux cleaned = -0.00182572 Jy ! Component: 850 - total flux cleaned = -0.00188346 Jy ! Component: 900 - total flux cleaned = -0.00186491 Jy ! Component: 950 - total flux cleaned = -0.00188415 Jy ! Component: 1000 - total flux cleaned = -0.00195829 Jy ! Component: 1050 - total flux cleaned = -0.00197659 Jy ! Component: 1100 - total flux cleaned = -0.00201285 Jy ! Component: 1150 - total flux cleaned = -0.00195883 Jy ! Component: 1200 - total flux cleaned = -0.00199456 Jy ! Component: 1250 - total flux cleaned = -0.00208203 Jy ! Component: 1300 - total flux cleaned = -0.00209909 Jy ! Component: 1350 - total flux cleaned = -0.00216761 Jy ! Component: 1400 - total flux cleaned = -0.00220147 Jy ! Component: 1450 - total flux cleaned = -0.00225195 Jy ! Component: 1500 - total flux cleaned = -0.00225209 Jy ! Component: 1550 - total flux cleaned = -0.00233444 Jy ! Component: 1600 - total flux cleaned = -0.00241606 Jy ! Component: 1650 - total flux cleaned = -0.0024484 Jy ! Component: 1700 - total flux cleaned = -0.00246434 Jy ! Component: 1750 - total flux cleaned = -0.00254405 Jy ! Component: 1800 - total flux cleaned = -0.00260734 Jy ! Component: 1850 - total flux cleaned = -0.00268573 Jy ! Component: 1900 - total flux cleaned = -0.00274792 Jy ! Component: 1950 - total flux cleaned = -0.0027631 Jy ! Component: 2000 - total flux cleaned = -0.00276292 Jy ! Component: 2050 - total flux cleaned = -0.00285408 Jy ! Component: 2100 - total flux cleaned = -0.00283915 Jy ! Component: 2150 - total flux cleaned = -0.00288381 Jy ! Component: 2200 - total flux cleaned = -0.00301716 Jy ! Component: 2250 - total flux cleaned = -0.00297287 Jy ! Component: 2300 - total flux cleaned = -0.00307486 Jy ! Component: 2350 - total flux cleaned = -0.00311834 Jy ! Component: 2400 - total flux cleaned = -0.00316141 Jy ! Component: 2450 - total flux cleaned = -0.00318987 Jy ! Component: 2500 - total flux cleaned = -0.00318991 Jy ! Component: 2550 - total flux cleaned = -0.00323247 Jy ! Component: 2600 - total flux cleaned = -0.00330212 Jy ! Component: 2650 - total flux cleaned = -0.00337151 Jy ! Component: 2700 - total flux cleaned = -0.00335784 Jy ! Component: 2750 - total flux cleaned = -0.00339892 Jy ! Component: 2800 - total flux cleaned = -0.00343984 Jy ! Component: 2850 - total flux cleaned = -0.00354765 Jy ! Component: 2900 - total flux cleaned = -0.00361451 Jy ! Component: 2950 - total flux cleaned = -0.00353477 Jy ! Component: 3000 - total flux cleaned = -0.00364054 Jy ! Component: 3050 - total flux cleaned = -0.00369281 Jy ! Component: 3100 - total flux cleaned = -0.0037579 Jy ! Component: 3150 - total flux cleaned = -0.00377093 Jy ! Component: 3200 - total flux cleaned = -0.00384804 Jy ! Component: 3250 - total flux cleaned = -0.00391188 Jy ! Component: 3300 - total flux cleaned = -0.00389919 Jy ! Component: 3350 - total flux cleaned = -0.00396223 Jy ! Component: 3400 - total flux cleaned = -0.00398724 Jy ! Component: 3450 - total flux cleaned = -0.00407422 Jy ! Component: 3500 - total flux cleaned = -0.00412353 Jy ! Component: 3550 - total flux cleaned = -0.00418472 Jy ! Component: 3600 - total flux cleaned = -0.00417252 Jy ! Component: 3650 - total flux cleaned = -0.00422077 Jy ! Component: 3700 - total flux cleaned = -0.00432893 Jy ! Component: 3750 - total flux cleaned = -0.00434084 Jy ! Component: 3800 - total flux cleaned = -0.00440017 Jy ! Component: 3850 - total flux cleaned = -0.00447091 Jy ! Component: 3900 - total flux cleaned = -0.00451783 Jy ! Component: 3950 - total flux cleaned = -0.00455266 Jy ! Component: 4000 - total flux cleaned = -0.004599 Jy ! Component: 4050 - total flux cleaned = -0.00462192 Jy ! Total flux subtracted in 4096 components = -0.00464489 Jy ! Clean residual min=-0.000657 max=0.000641 Jy/beam ! Clean residual mean=0.000000 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.802404 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 641 components and 0.802403 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1516+0015_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8225 x 1.97 at -0.1964 degrees (North through East) ! Clean map min=-0.0016685 max=0.51671 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1516+0015_X_map.fits wmodel /vlbi/uf001/uva//J1516+0015_X_map.mod ! Writing 641 model components to file: /vlbi/uf001/uva//J1516+0015_X_map.mod wobs /vlbi/uf001/uva//J1516+0015_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1516+0015_X_uvs.fits wwins /vlbi/uf001/uva//J1516+0015_X_map.win ! wwins: Wrote 15 windows to /vlbi/uf001/uva//J1516+0015_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.516714 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000197093 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.114431 0.114431 0.228862 0.457724 0.915447 1.83089 3.66179 7.32358 14.6472 29.2943 58.5886 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.516 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2621.67 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1516+0015_X_dfm.log closed on Mon Jan 14 03:15:27 2019