! Started logfile: /vlbi/uf001/uvm//J1513-1012_X_b_dfm.log on Sun Jan 13 21:51:32 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1513-1012_X_b_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1513-1012_X_b_uvm.fits ! AN table 1: 7 integrations on 36 of 36 possible baselines. ! AN table 2: 6 integrations on 28 of 28 possible baselines. ! AN table 3: 13 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.840561 visibilities/baseline/integration-bin. ! Found source: J1513-1012 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 7908 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1513-1012_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 59 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 59 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 59 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 59 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 59 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 59 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 59 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 59 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 59 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 59 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 59 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 59 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.688320Jy sigma=19.432042 ! Fit after self-cal, rms=0.430520Jy sigma=4.793013 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6883 mas, bmaj=3.157 mas, bpa=-17.63 degrees ! Estimated noise=1.25933 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.983764 Jy ! Component: 100 - total flux cleaned = 1.22017 Jy ! Total flux subtracted in 100 components = 1.22017 Jy ! Clean residual min=-0.043806 max=0.098470 Jy/beam ! Clean residual mean=0.000239 rms=0.010313 Jy/beam ! Combined flux in latest and established models = 1.22017 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.22017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.266167Jy sigma=2.940645 ! Fit after self-cal, rms=0.266111Jy sigma=2.940107 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108281 Jy ! Component: 100 - total flux cleaned = 0.166017 Jy ! Total flux subtracted in 100 components = 0.166017 Jy ! Clean residual min=-0.030579 max=0.046068 Jy/beam ! Clean residual mean=0.000167 rms=0.006808 Jy/beam ! Combined flux in latest and established models = 1.38618 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 10 components and 1.38618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.181336Jy sigma=2.006447 ! Fit after self-cal, rms=0.181159Jy sigma=2.004706 ! Inverting map ! Added new window around map position (1.6, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0433546 Jy ! Component: 100 - total flux cleaned = 0.0709075 Jy ! Total flux subtracted in 100 components = 0.0709075 Jy ! Clean residual min=-0.029551 max=0.033728 Jy/beam ! Clean residual mean=0.000141 rms=0.005900 Jy/beam ! Combined flux in latest and established models = 1.45709 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 27 components and 1.45709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.161662Jy sigma=1.786587 ! Fit after self-cal, rms=0.161328Jy sigma=1.780749 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8826 mas, bmaj=3.267 mas, bpa=-14.94 degrees ! Estimated noise=0.860469 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0444895 Jy ! Component: 100 - total flux cleaned = 0.0741583 Jy ! Component: 150 - total flux cleaned = 0.0963784 Jy ! Component: 200 - total flux cleaned = 0.113367 Jy ! Total flux subtracted in 200 components = 0.113367 Jy ! Clean residual min=-0.028951 max=0.040763 Jy/beam ! Clean residual mean=0.000219 rms=0.007967 Jy/beam ! Combined flux in latest and established models = 1.57046 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 71 components and 1.57046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.143699Jy sigma=1.595806 ! Fit after self-cal, rms=0.143461Jy sigma=1.591457 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8826 x 3.267 at -14.94 degrees (North through East) ! Clean map min=-0.026809 max=1.3287 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 0.97 KP 1.06 ! LA 0.84 MK 1.02 NL 1.16 OV 0.96 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 HN 0.96 KP 0.98 ! LA 0.99 MK 0.99 NL 1.10 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.01 HN 1.06 KP 1.03 ! LA 1.03 MK 1.01 NL 1.04 OV 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.96 HN 0.97 KP 1.04 ! LA 0.84 MK 1.01 NL 1.16 OV 0.96 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 HN 0.97 KP 0.97 ! LA 1.00 MK 1.02 NL 1.08 PT 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.02 HN 1.05 KP 1.03 ! LA 1.02 MK 1.00 NL 1.04 OV 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 0.96 KP 1.03 ! LA 0.86 MK 1.00 NL 1.15 OV 0.97 ! PT 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 HN 0.97 KP 0.97 ! LA 1.01 MK 1.02 NL 1.09 PT 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.02 HN 1.04 KP 1.03 ! LA 1.03 MK 1.01 NL 1.04 OV 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 0.98 KP 1.05 ! LA 0.88 MK 0.99 NL 1.16 OV 0.97 ! PT 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 HN 0.96 KP 0.98 ! LA 1.01 MK 1.02 NL 1.10 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.03 HN 1.09 KP 1.03 ! LA 1.03 MK 1.01 NL 1.06 OV 0.92 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.99 HN 0.98 KP 1.04 ! LA 0.86 MK 1.00 NL 1.16 OV 0.95 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HN 0.98 KP 0.98 ! LA 1.00 MK 1.01 NL 1.08 PT 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.01 HN 1.05 KP 1.04 ! LA 1.02 MK 0.99 NL 1.03 OV 0.94 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.95 HN 0.98 KP 1.05 ! LA 0.83 MK 1.01 NL 1.15 OV 0.97 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 HN 0.96 KP 0.97 ! LA 0.99 MK 1.01 NL 1.08 PT 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.02 HN 1.07 KP 1.01 ! LA 1.03 MK 0.99 NL 1.03 OV 0.94 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.94 HN 0.95 KP 1.06 ! LA 0.85 MK 1.01 NL 1.13 OV 0.96 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HN 0.97 KP 0.98 ! LA 0.99 MK 1.03 NL 1.09 PT 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.02 HN 1.09 KP 1.02 ! LA 1.01 MK 0.99 NL 1.03 OV 0.93 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 0.96 KP 1.05 ! LA 0.85 MK 1.01 NL 1.14 OV 0.95 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HN 0.96 KP 0.97 ! LA 0.99 MK 1.00 NL 1.09 PT 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.03 HN 1.06 KP 1.04 ! LA 1.02 MK 1.01 NL 1.05 OV 0.93 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 0.97 KP 1.03 ! LA 0.85 MK 1.01 NL 1.12 OV 0.96 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.98 HN 0.98 KP 0.98 ! LA 1.00 MK 1.01 NL 1.08 PT 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.02 HN 1.05 KP 1.04 ! LA 1.02 MK 1.00 NL 1.04 OV 0.94 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 1.00 KP 1.03 ! LA 0.84 MK 0.98 NL 1.14 OV 0.97 ! PT 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 HN 0.96 KP 0.97 ! LA 1.00 MK 1.01 NL 1.11 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.03 HN 1.06 KP 1.03 ! LA 1.02 MK 1.01 NL 1.05 OV 0.94 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 0.98 KP 1.05 ! LA 0.85 MK 1.00 NL 1.13 OV 0.93 ! PT 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.98 HN 0.96 KP 0.97 ! LA 1.00 MK 1.02 NL 1.12 PT 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.03 HN 1.08 KP 1.04 ! LA 1.02 MK 1.02 NL 1.03 OV 0.92 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 0.97 KP 1.03 ! LA 0.87 MK 1.01 NL 1.14 OV 0.96 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.97 HN 0.97 KP 0.99 ! LA 1.00 MK 1.02 NL 1.10 PT 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.03 HN 1.09 KP 1.00 ! LA 1.04 MK 1.03 NL 1.04 OV 0.93 ! ! ! Fit before self-cal, rms=0.143461Jy sigma=1.591457 ! Fit after self-cal, rms=0.085963Jy sigma=0.939186 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8888 mas, bmaj=3.28 mas, bpa=-14.85 degrees ! Estimated noise=0.858383 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0168548 Jy ! Component: 100 - total flux cleaned = -0.0211209 Jy ! Component: 150 - total flux cleaned = -0.0213881 Jy ! Component: 200 - total flux cleaned = -0.022091 Jy ! Total flux subtracted in 200 components = -0.022091 Jy ! Clean residual min=-0.012497 max=0.013147 Jy/beam ! Clean residual mean=0.000029 rms=0.002715 Jy/beam ! Combined flux in latest and established models = 1.54837 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 88 components and 1.54837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082079Jy sigma=0.895970 ! Fit after self-cal, rms=0.081749Jy sigma=0.892986 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081749Jy sigma=0.892986 ! Fit after self-cal, rms=0.071508Jy sigma=0.784269 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8867 mas, bmaj=3.28 mas, bpa=-14.9 degrees ! Estimated noise=0.856247 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00781726 Jy ! Component: 100 - total flux cleaned = -0.00828637 Jy ! Component: 150 - total flux cleaned = -0.00795217 Jy ! Component: 200 - total flux cleaned = -0.00810088 Jy ! Total flux subtracted in 200 components = -0.00810088 Jy ! Clean residual min=-0.008871 max=0.009034 Jy/beam ! Clean residual mean=0.000021 rms=0.001768 Jy/beam ! Combined flux in latest and established models = 1.54027 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 105 components and 1.54027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069685Jy sigma=0.763837 ! Fit after self-cal, rms=0.069399Jy sigma=0.761456 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.2, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00928245 Jy ! Component: 100 - total flux cleaned = 0.0128429 Jy ! Component: 150 - total flux cleaned = 0.015225 Jy ! Component: 200 - total flux cleaned = 0.0171122 Jy ! Total flux subtracted in 200 components = 0.0171122 Jy ! Clean residual min=-0.006690 max=0.006488 Jy/beam ! Clean residual mean=0.000008 rms=0.001354 Jy/beam ! Combined flux in latest and established models = 1.55738 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 134 components and 1.55738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067820Jy sigma=0.744747 ! Fit after self-cal, rms=0.067669Jy sigma=0.743423 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067669Jy sigma=0.743423 ! Fit after self-cal, rms=0.067156Jy sigma=0.738974 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8867 mas, bmaj=3.278 mas, bpa=-14.9 degrees ! Estimated noise=0.855155 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00380684 Jy ! Component: 100 - total flux cleaned = -0.00308748 Jy ! Component: 150 - total flux cleaned = -0.00200844 Jy ! Component: 200 - total flux cleaned = -0.00104285 Jy ! Total flux subtracted in 200 components = -0.00104285 Jy ! Clean residual min=-0.005731 max=0.005750 Jy/beam ! Clean residual mean=0.000007 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 1.55634 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 145 components and 1.55634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066518Jy sigma=0.731427 ! Fit after self-cal, rms=0.066428Jy sigma=0.730851 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14.4, 27.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00366075 Jy ! Component: 100 - total flux cleaned = 0.00483357 Jy ! Component: 150 - total flux cleaned = 0.00559329 Jy ! Component: 200 - total flux cleaned = 0.00621035 Jy ! Total flux subtracted in 200 components = 0.00621035 Jy ! Clean residual min=-0.004823 max=0.004128 Jy/beam ! Clean residual mean=0.000005 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 1.56255 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 163 components and 1.56255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066006Jy sigma=0.725485 ! Fit after self-cal, rms=0.065980Jy sigma=0.725277 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065980Jy sigma=0.725277 ! Fit after self-cal, rms=0.065760Jy sigma=0.723492 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.129 mas, bmaj=4.134 mas, bpa=3.128 degrees ! Estimated noise=1.09969 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000586721 Jy ! Component: 100 - total flux cleaned = 0.000599493 Jy ! Component: 150 - total flux cleaned = 0.00164673 Jy ! Component: 200 - total flux cleaned = 0.00259336 Jy ! Total flux subtracted in 200 components = 0.00259336 Jy ! Clean residual min=-0.004920 max=0.004425 Jy/beam ! Clean residual mean=0.000007 rms=0.001188 Jy/beam ! Combined flux in latest and established models = 1.56514 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 184 components and 1.56514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065624Jy sigma=0.722158 ! Fit after self-cal, rms=0.065602Jy sigma=0.721892 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000550913 Jy ! Component: 100 - total flux cleaned = 0.00120811 Jy ! Component: 150 - total flux cleaned = 0.00160678 Jy ! Component: 200 - total flux cleaned = 0.00179423 Jy ! Total flux subtracted in 200 components = 0.00179423 Jy ! Clean residual min=-0.004634 max=0.004508 Jy/beam ! Clean residual mean=0.000005 rms=0.001157 Jy/beam ! Combined flux in latest and established models = 1.56693 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 195 components and 1.56693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065577Jy sigma=0.721903 ! Fit after self-cal, rms=0.065576Jy sigma=0.721840 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8867 mas, bmaj=3.275 mas, bpa=-14.9 degrees ! Estimated noise=0.854422 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8867 x 3.275 at -14.9 degrees (North through East) ! Clean map min=-0.0040235 max=1.3256 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065576Jy sigma=0.721840 ! Fit after self-cal, rms=0.061576Jy sigma=0.663382 ! Inverting map and beam ! Estimated beam: bmin=0.8869 mas, bmaj=3.274 mas, bpa=-14.9 degrees ! Estimated noise=0.854518 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00190194 Jy ! Component: 100 - total flux cleaned = -0.00209202 Jy ! Component: 150 - total flux cleaned = -0.00183488 Jy ! Component: 200 - total flux cleaned = -0.00152641 Jy ! Total flux subtracted in 200 components = -0.00152641 Jy ! Clean residual min=-0.003672 max=0.003118 Jy/beam ! Clean residual mean=0.000005 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 1.56541 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 210 components and 1.56541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061318Jy sigma=0.659748 ! Fit after self-cal, rms=0.061298Jy sigma=0.659660 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.1421e-05 Jy ! Component: 100 - total flux cleaned = 0.000208118 Jy ! Component: 150 - total flux cleaned = 0.000523048 Jy ! Component: 200 - total flux cleaned = 0.000699073 Jy ! Total flux subtracted in 200 components = 0.000699073 Jy ! Clean residual min=-0.003532 max=0.003026 Jy/beam ! Clean residual mean=0.000005 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 1.56611 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 218 components and 1.56611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061181Jy sigma=0.658053 ! Fit after self-cal, rms=0.061169Jy sigma=0.658007 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061169Jy sigma=0.658007 ! Fit after self-cal, rms=0.061105Jy sigma=0.657316 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6912 mas, bmaj=3.159 mas, bpa=-17.67 degrees ! Estimated noise=1.26995 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.992018 Jy ! Component: 100 - total flux cleaned = 1.22791 Jy ! Component: 150 - total flux cleaned = 1.33404 Jy ! Component: 200 - total flux cleaned = 1.39054 Jy ! Total flux subtracted in 200 components = 1.39054 Jy ! Clean residual min=-0.011058 max=0.027247 Jy/beam ! Clean residual mean=0.000077 rms=0.003152 Jy/beam ! Combined flux in latest and established models = 1.39054 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.39054 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8868 mas, bmaj=3.273 mas, bpa=-14.9 degrees ! Estimated noise=0.85429 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0484128 Jy ! Component: 100 - total flux cleaned = 0.0750334 Jy ! Component: 150 - total flux cleaned = 0.0924938 Jy ! Component: 200 - total flux cleaned = 0.105232 Jy ! Total flux subtracted in 200 components = 0.105232 Jy ! Clean residual min=-0.005726 max=0.008677 Jy/beam ! Clean residual mean=0.000057 rms=0.001975 Jy/beam ! Combined flux in latest and established models = 1.49578 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 61 components and 1.49578 Jy ! Inverting map ! Added new window around map position (-7.4, 13.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010229 Jy ! Component: 100 - total flux cleaned = 0.0183663 Jy ! Component: 150 - total flux cleaned = 0.0250633 Jy ! Component: 200 - total flux cleaned = 0.0306677 Jy ! Total flux subtracted in 200 components = 0.0306677 Jy ! Clean residual min=-0.004486 max=0.005468 Jy/beam ! Clean residual mean=0.000031 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 1.52644 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 96 components and 1.52644 Jy ! Inverting map ! Added new window around map position (-20.8, 31.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00539449 Jy ! Component: 100 - total flux cleaned = 0.0096239 Jy ! Component: 150 - total flux cleaned = 0.0133147 Jy ! Component: 200 - total flux cleaned = 0.0165637 Jy ! Total flux subtracted in 200 components = 0.0165637 Jy ! Clean residual min=-0.004072 max=0.003608 Jy/beam ! Clean residual mean=0.000020 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 1.54301 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 128 components and 1.54301 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.129 mas, bmaj=4.131 mas, bpa=3.187 degrees ! Estimated noise=1.09967 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00470503 Jy ! Component: 100 - total flux cleaned = 0.00830134 Jy ! Component: 150 - total flux cleaned = 0.0112181 Jy ! Component: 200 - total flux cleaned = 0.0131715 Jy ! Total flux subtracted in 200 components = 0.0131715 Jy ! Clean residual min=-0.004029 max=0.003618 Jy/beam ! Clean residual mean=0.000022 rms=0.001065 Jy/beam ! Combined flux in latest and established models = 1.55618 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135205 Jy ! Component: 100 - total flux cleaned = 0.00203151 Jy ! Component: 150 - total flux cleaned = 0.00265954 Jy ! Component: 200 - total flux cleaned = 0.00317842 Jy ! Total flux subtracted in 200 components = 0.00317842 Jy ! Clean residual min=-0.003643 max=0.003433 Jy/beam ! Clean residual mean=0.000017 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 1.55936 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 168 components and 1.55936 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8868 mas, bmaj=3.273 mas, bpa=-14.9 degrees ! Estimated noise=0.85429 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000708919 Jy ! Component: 100 - total flux cleaned = 0.000869483 Jy ! Component: 150 - total flux cleaned = 0.000942189 Jy ! Component: 200 - total flux cleaned = 0.00113769 Jy ! Total flux subtracted in 200 components = 0.00113769 Jy ! Clean residual min=-0.003472 max=0.003125 Jy/beam ! Clean residual mean=0.000007 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 1.56049 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 202 components and 1.56049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060890Jy sigma=0.654472 ! Fit after self-cal, rms=0.060798Jy sigma=0.653567 wmodel J1513-1012_X_b_map.mod ! Writing 202 model components to file: J1513-1012_X_b_map.mod wobs J1513-1012_X_b_uvs.fits ! Writing UV FITS file: J1513-1012_X_b_uvs.fits wwins J1513-1012_X_b_map.win ! wwins: Wrote 6 windows to J1513-1012_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000383971 Jy ! Component: 100 - total flux cleaned = -0.000586837 Jy ! Component: 150 - total flux cleaned = -0.000724536 Jy ! Component: 200 - total flux cleaned = -0.000679721 Jy ! Component: 250 - total flux cleaned = -0.000594505 Jy ! Component: 300 - total flux cleaned = -0.000389129 Jy ! Component: 350 - total flux cleaned = -0.000348983 Jy ! Component: 400 - total flux cleaned = -0.000154243 Jy ! Component: 450 - total flux cleaned = -0.000117537 Jy ! Component: 500 - total flux cleaned = -0.000192145 Jy ! Component: 550 - total flux cleaned = -1.15425e-05 Jy ! Component: 600 - total flux cleaned = -1.31627e-05 Jy ! Component: 650 - total flux cleaned = -0.000151858 Jy ! Component: 700 - total flux cleaned = -0.000185605 Jy ! Component: 750 - total flux cleaned = -0.000252398 Jy ! Component: 800 - total flux cleaned = -0.000187289 Jy ! Component: 850 - total flux cleaned = -0.000316133 Jy ! Component: 900 - total flux cleaned = -0.000284497 Jy ! Component: 950 - total flux cleaned = -0.000346405 Jy ! Component: 1000 - total flux cleaned = -0.000376871 Jy ! Component: 1050 - total flux cleaned = -0.000406907 Jy ! Component: 1100 - total flux cleaned = -0.000347467 Jy ! Component: 1150 - total flux cleaned = -0.000377068 Jy ! Component: 1200 - total flux cleaned = -0.000405956 Jy ! Component: 1250 - total flux cleaned = -0.000434692 Jy ! Component: 1300 - total flux cleaned = -0.000378811 Jy ! Component: 1350 - total flux cleaned = -0.000406657 Jy ! Component: 1400 - total flux cleaned = -0.000433837 Jy ! Component: 1450 - total flux cleaned = -0.00032522 Jy ! Component: 1500 - total flux cleaned = -0.000378973 Jy ! Component: 1550 - total flux cleaned = -0.000326358 Jy ! Component: 1600 - total flux cleaned = -0.000248059 Jy ! Component: 1650 - total flux cleaned = -0.000351826 Jy ! Component: 1700 - total flux cleaned = -0.000300493 Jy ! Component: 1750 - total flux cleaned = -0.000351288 Jy ! Component: 1800 - total flux cleaned = -0.000350657 Jy ! Component: 1850 - total flux cleaned = -0.000251844 Jy ! Component: 1900 - total flux cleaned = -0.000276397 Jy ! Component: 1950 - total flux cleaned = -0.000300381 Jy ! Component: 2000 - total flux cleaned = -0.000228025 Jy ! Component: 2050 - total flux cleaned = -0.000156743 Jy ! Component: 2100 - total flux cleaned = -0.000180178 Jy ! Component: 2150 - total flux cleaned = -1.72208e-05 Jy ! Component: 2200 - total flux cleaned = 2.88177e-05 Jy ! Component: 2250 - total flux cleaned = 0.000120064 Jy ! Component: 2300 - total flux cleaned = 0.000142386 Jy ! Component: 2350 - total flux cleaned = 0.00011974 Jy ! Component: 2400 - total flux cleaned = 0.000186691 Jy ! Component: 2450 - total flux cleaned = 0.000208728 Jy ! Component: 2500 - total flux cleaned = 0.000187011 Jy ! Component: 2550 - total flux cleaned = 0.000252113 Jy ! Component: 2600 - total flux cleaned = 0.00018735 Jy ! Component: 2650 - total flux cleaned = 0.000209073 Jy ! Component: 2700 - total flux cleaned = 0.000209068 Jy ! Component: 2750 - total flux cleaned = 0.000251346 Jy ! Component: 2800 - total flux cleaned = 0.000272193 Jy ! Component: 2850 - total flux cleaned = 0.000251311 Jy ! Component: 2900 - total flux cleaned = 0.000251326 Jy ! Component: 2950 - total flux cleaned = 0.000231106 Jy ! Component: 3000 - total flux cleaned = 0.000271509 Jy ! Component: 3050 - total flux cleaned = 0.000271738 Jy ! Component: 3100 - total flux cleaned = 0.000291727 Jy ! Component: 3150 - total flux cleaned = 0.000271842 Jy ! Component: 3200 - total flux cleaned = 0.000271461 Jy ! Component: 3250 - total flux cleaned = 0.000174237 Jy ! Component: 3300 - total flux cleaned = 0.000251553 Jy ! Component: 3350 - total flux cleaned = 0.000193917 Jy ! Component: 3400 - total flux cleaned = 0.000213141 Jy ! Component: 3450 - total flux cleaned = 0.000175333 Jy ! Component: 3500 - total flux cleaned = 0.000175277 Jy ! Component: 3550 - total flux cleaned = 0.000137919 Jy ! Component: 3600 - total flux cleaned = 0.000193411 Jy ! Component: 3650 - total flux cleaned = 0.000119597 Jy ! Component: 3700 - total flux cleaned = 0.000138129 Jy ! Component: 3750 - total flux cleaned = 0.000156122 Jy ! Component: 3800 - total flux cleaned = 6.57415e-05 Jy ! Component: 3850 - total flux cleaned = 0.000101963 Jy ! Component: 3900 - total flux cleaned = 0.000137773 Jy ! Component: 3950 - total flux cleaned = 8.44659e-05 Jy ! Component: 4000 - total flux cleaned = 8.45619e-05 Jy ! Component: 4050 - total flux cleaned = 8.44631e-05 Jy ! Total flux subtracted in 4096 components = 4.96458e-05 Jy ! Clean residual min=-0.001020 max=0.001004 Jy/beam ! Clean residual mean=-0.000001 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 1.56054 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 500 components and 1.56054 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1513-1012_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8868 x 3.273 at -14.9 degrees (North through East) ! Clean map min=-0.0018101 max=1.3289 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1513-1012_X_b_map.fits wmodel /vlbi/uf001/uvm//J1513-1012_X_b_map.mod ! Writing 500 model components to file: /vlbi/uf001/uvm//J1513-1012_X_b_map.mod wobs /vlbi/uf001/uvm//J1513-1012_X_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1513-1012_X_b_uvs.fits wwins /vlbi/uf001/uvm//J1513-1012_X_b_map.win ! wwins: Wrote 7 windows to /vlbi/uf001/uvm//J1513-1012_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.32891 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000311974 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.070428 0.070428 0.140856 0.281712 0.563424 1.12685 2.2537 4.50739 9.01478 18.0296 36.0591 72.1183 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.328 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4259.67 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1513-1012_X_b_dfm.log closed on Sun Jan 13 21:51:36 2019