! Started logfile: /vlbi/uf001/uva//J1506+8319_X_dfm.log on Mon Jan 14 03:11:20 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1506+8319_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1506+8319_X_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.973684 visibilities/baseline/integration-bin. ! Found source: J1506+8319 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 39960 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1506+8319_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.022049Jy sigma=23.611976 ! Fit after self-cal, rms=0.825580Jy sigma=19.079636 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7597 mas, bmaj=0.8524 mas, bpa=67.57 degrees ! Estimated noise=0.332401 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.125375 Jy ! Component: 100 - total flux cleaned = 0.169413 Jy ! Total flux subtracted in 100 components = 0.169413 Jy ! Clean residual min=-0.008210 max=0.019975 Jy/beam ! Clean residual mean=-0.000009 rms=0.001346 Jy/beam ! Combined flux in latest and established models = 0.169413 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.169413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072364Jy sigma=1.590470 ! Fit after self-cal, rms=0.072039Jy sigma=1.582943 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0229431 Jy ! Component: 100 - total flux cleaned = 0.0350822 Jy ! Total flux subtracted in 100 components = 0.0350822 Jy ! Clean residual min=-0.004129 max=0.005777 Jy/beam ! Clean residual mean=-0.000004 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.204495 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 8 components and 0.204495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061725Jy sigma=1.345400 ! Fit after self-cal, rms=0.061692Jy sigma=1.344636 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00674884 Jy ! Component: 100 - total flux cleaned = 0.0105625 Jy ! Total flux subtracted in 100 components = 0.0105625 Jy ! Clean residual min=-0.004030 max=0.004732 Jy/beam ! Clean residual mean=-0.000002 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.215058 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 10 components and 0.215058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060503Jy sigma=1.321482 ! Fit after self-cal, rms=0.060501Jy sigma=1.321428 ! Inverting map ! Added new window around map position (-2.8, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423676 Jy ! Component: 100 - total flux cleaned = 0.0066609 Jy ! Total flux subtracted in 100 components = 0.0066609 Jy ! Clean residual min=-0.003987 max=0.004167 Jy/beam ! Clean residual mean=-0.000002 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.221718 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 13 components and 0.221718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060073Jy sigma=1.312685 ! Fit after self-cal, rms=0.060054Jy sigma=1.312374 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.021 mas, bmaj=1.132 mas, bpa=63.01 degrees ! Estimated noise=0.159842 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.8, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00517364 Jy ! Component: 100 - total flux cleaned = 0.00676677 Jy ! Component: 150 - total flux cleaned = 0.00814134 Jy ! Component: 200 - total flux cleaned = 0.00935782 Jy ! Total flux subtracted in 200 components = 0.00935782 Jy ! Clean residual min=-0.003334 max=0.003891 Jy/beam ! Clean residual mean=0.000001 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.231076 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 34 components and 0.231076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059459Jy sigma=1.298398 ! Fit after self-cal, rms=0.059415Jy sigma=1.297365 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.021 x 1.132 at 63.01 degrees (North through East) ! Clean map min=-0.003457 max=0.17045 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 0.92 KP 1.01 ! LA 0.99 MK 1.05 NL 1.07 OV 0.93 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 0.94 KP 1.00 ! LA 0.99 MK 1.00 NL 1.08 OV 0.93 ! PT 0.93 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 0.95 KP 1.01 ! LA 1.00 MK 1.02 NL 1.10 OV 0.93 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.04 HN 0.92 KP 1.02 ! LA 0.98 MK 1.02 NL 1.08 OV 0.92 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 0.93 KP 1.00 ! LA 0.98 MK 1.00 NL 1.11 OV 0.93 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.92 KP 1.02 ! LA 1.00 MK 1.02 NL 1.10 OV 0.93 ! PT 0.93 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.96 KP 1.01 ! LA 0.99 MK 1.00 NL 1.09 OV 0.92 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 0.97 KP 1.01 ! LA 1.00 MK 1.00 NL 1.11 OV 0.92 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.05 HN 0.96 KP 1.01 ! LA 1.01 MK 1.04 NL 1.08 OV 0.94 ! PT 0.91 SC 1.04 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.06 HN 0.94 KP 1.02 ! LA 0.99 MK 1.04 NL 1.09 OV 0.94 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.96 KP 1.00 ! LA 1.01 MK 1.03 NL 1.10 OV 0.95 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 0.97 KP 1.00 ! LA 1.01 MK 1.04 NL 1.11 OV 0.93 ! PT 0.94 SC 0.99 ! ! ! Fit before self-cal, rms=0.059415Jy sigma=1.297365 ! Fit after self-cal, rms=0.057470Jy sigma=1.256471 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.022 mas, bmaj=1.133 mas, bpa=62.63 degrees ! Estimated noise=0.159486 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00256784 Jy ! Component: 100 - total flux cleaned = -0.00309294 Jy ! Component: 150 - total flux cleaned = -0.00345071 Jy ! Component: 200 - total flux cleaned = -0.00370545 Jy ! Total flux subtracted in 200 components = -0.00370545 Jy ! Clean residual min=-0.001890 max=0.002336 Jy/beam ! Clean residual mean=0.000003 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.227371 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 45 components and 0.227371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057344Jy sigma=1.253567 ! Fit after self-cal, rms=0.057347Jy sigma=1.253290 ! Inverting map ! Added new window around map position (-2, 7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217733 Jy ! Component: 100 - total flux cleaned = 0.00306567 Jy ! Component: 150 - total flux cleaned = 0.00354543 Jy ! Component: 200 - total flux cleaned = 0.00388227 Jy ! Total flux subtracted in 200 components = 0.00388227 Jy ! Clean residual min=-0.001727 max=0.001962 Jy/beam ! Clean residual mean=0.000002 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.231253 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 70 components and 0.231253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057256Jy sigma=1.251206 ! Fit after self-cal, rms=0.057251Jy sigma=1.251074 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057251Jy sigma=1.251074 ! Fit after self-cal, rms=0.056237Jy sigma=1.237167 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.019 mas, bmaj=1.133 mas, bpa=63.78 degrees ! Estimated noise=0.159182 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.25538e-05 Jy ! Component: 100 - total flux cleaned = 0.000425555 Jy ! Component: 150 - total flux cleaned = 0.000597376 Jy ! Component: 200 - total flux cleaned = 0.0007448 Jy ! Total flux subtracted in 200 components = 0.0007448 Jy ! Clean residual min=-0.001004 max=0.001887 Jy/beam ! Clean residual mean=-0.000001 rms=0.000252 Jy/beam ! Combined flux in latest and established models = 0.231998 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 79 components and 0.231998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056200Jy sigma=1.236312 ! Fit after self-cal, rms=0.056200Jy sigma=1.236222 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, 4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164348 Jy ! Component: 100 - total flux cleaned = 0.00208886 Jy ! Component: 150 - total flux cleaned = 0.00223153 Jy ! Component: 200 - total flux cleaned = 0.00235006 Jy ! Total flux subtracted in 200 components = 0.00235006 Jy ! Clean residual min=-0.000897 max=0.000967 Jy/beam ! Clean residual mean=-0.000001 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.234348 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 94 components and 0.234348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056151Jy sigma=1.234997 ! Fit after self-cal, rms=0.056147Jy sigma=1.234915 ! Inverting map ! Added new window around map position (2.6, 9.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000867763 Jy ! Component: 100 - total flux cleaned = 0.00122641 Jy ! Component: 150 - total flux cleaned = 0.00136965 Jy ! Component: 200 - total flux cleaned = 0.00148322 Jy ! Total flux subtracted in 200 components = 0.00148322 Jy ! Clean residual min=-0.000884 max=0.000956 Jy/beam ! Clean residual mean=-0.000001 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.235831 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 111 components and 0.235831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056131Jy sigma=1.234474 ! Fit after self-cal, rms=0.056130Jy sigma=1.234452 ! Inverting map ! Added new window around map position (10.8, -21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000490933 Jy ! Component: 100 - total flux cleaned = 0.000589815 Jy ! Component: 150 - total flux cleaned = 0.000711383 Jy ! Component: 200 - total flux cleaned = 0.000808426 Jy ! Total flux subtracted in 200 components = 0.000808426 Jy ! Clean residual min=-0.000877 max=0.000888 Jy/beam ! Clean residual mean=-0.000001 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.23664 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 129 components and 0.23664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056115Jy sigma=1.234077 ! Fit after self-cal, rms=0.056114Jy sigma=1.234060 ! Inverting map ! Added new window around map position (-28, 42.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000666142 Jy ! Component: 100 - total flux cleaned = 0.00085451 Jy ! Component: 150 - total flux cleaned = 0.000935628 Jy ! Component: 200 - total flux cleaned = 0.00102638 Jy ! Total flux subtracted in 200 components = 0.00102638 Jy ! Clean residual min=-0.000829 max=0.000887 Jy/beam ! Clean residual mean=-0.000001 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.237666 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 146 components and 0.237666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056099Jy sigma=1.233745 ! Fit after self-cal, rms=0.056099Jy sigma=1.233735 ! Inverting map ! Added new window around map position (-29.6, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000730649 Jy ! Component: 100 - total flux cleaned = 0.00086223 Jy ! Component: 150 - total flux cleaned = 0.00103702 Jy ! Component: 200 - total flux cleaned = 0.00115407 Jy ! Total flux subtracted in 200 components = 0.00115407 Jy ! Clean residual min=-0.000778 max=0.000804 Jy/beam ! Clean residual mean=-0.000001 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.23882 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 159 components and 0.23882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056083Jy sigma=1.233401 ! Fit after self-cal, rms=0.056083Jy sigma=1.233392 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056083Jy sigma=1.233392 ! Fit after self-cal, rms=0.055988Jy sigma=1.233088 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.018 mas, bmaj=1.132 mas, bpa=63.96 degrees ! Estimated noise=0.159073 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.73508e-05 Jy ! Component: 100 - total flux cleaned = 0.000159892 Jy ! Component: 150 - total flux cleaned = 0.000274975 Jy ! Component: 200 - total flux cleaned = 0.000334889 Jy ! Total flux subtracted in 200 components = 0.000334889 Jy ! Clean residual min=-0.000721 max=0.000746 Jy/beam ! Clean residual mean=0.000000 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.239155 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 170 components and 0.239155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055977Jy sigma=1.232845 ! Fit after self-cal, rms=0.055977Jy sigma=1.232839 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103485 Jy ! Component: 100 - total flux cleaned = 0.000131489 Jy ! Component: 150 - total flux cleaned = 0.000197051 Jy ! Component: 200 - total flux cleaned = 0.00020954 Jy ! Total flux subtracted in 200 components = 0.00020954 Jy ! Clean residual min=-0.000712 max=0.000734 Jy/beam ! Clean residual mean=0.000000 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.239364 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 175 components and 0.239364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055971Jy sigma=1.232715 ! Fit after self-cal, rms=0.055971Jy sigma=1.232717 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055971Jy sigma=1.232717 ! Fit after self-cal, rms=0.055953Jy sigma=1.232677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.413 mas, bmaj=2.585 mas, bpa=61.24 degrees ! Estimated noise=0.21008 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00035532 Jy ! Component: 100 - total flux cleaned = 0.000454008 Jy ! Component: 150 - total flux cleaned = 0.000531832 Jy ! Component: 200 - total flux cleaned = 0.000610975 Jy ! Total flux subtracted in 200 components = 0.000610975 Jy ! Clean residual min=-0.000761 max=0.000786 Jy/beam ! Clean residual mean=0.000001 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.239975 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 190 components and 0.239975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055952Jy sigma=1.232629 ! Fit after self-cal, rms=0.055951Jy sigma=1.232620 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00019252 Jy ! Component: 100 - total flux cleaned = 0.000292352 Jy ! Component: 150 - total flux cleaned = 0.000371551 Jy ! Component: 200 - total flux cleaned = 0.000411177 Jy ! Total flux subtracted in 200 components = 0.000411177 Jy ! Clean residual min=-0.000794 max=0.000768 Jy/beam ! Clean residual mean=0.000001 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.240387 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 200 components and 0.240387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055951Jy sigma=1.232617 ! Fit after self-cal, rms=0.055951Jy sigma=1.232614 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.018 mas, bmaj=1.132 mas, bpa=64.11 degrees ! Estimated noise=0.159074 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.018 x 1.132 at 64.11 degrees (North through East) ! Clean map min=-0.00101 max=0.1698 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7577 mas, bmaj=0.8525 mas, bpa=68.25 degrees ! Estimated noise=0.331003 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.125298 Jy ! Component: 100 - total flux cleaned = 0.169806 Jy ! Component: 150 - total flux cleaned = 0.191949 Jy ! Component: 200 - total flux cleaned = 0.203878 Jy ! Total flux subtracted in 200 components = 0.203878 Jy ! Clean residual min=-0.002962 max=0.005881 Jy/beam ! Clean residual mean=-0.000003 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.203878 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.203878 Jy ! Inverting map and beam ! Estimated beam: bmin=1.018 mas, bmaj=1.132 mas, bpa=64.11 degrees ! Estimated noise=0.159074 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00925543 Jy ! Component: 100 - total flux cleaned = 0.0139003 Jy ! Component: 150 - total flux cleaned = 0.0171243 Jy ! Component: 200 - total flux cleaned = 0.0196268 Jy ! Total flux subtracted in 200 components = 0.0196268 Jy ! Clean residual min=-0.001128 max=0.001576 Jy/beam ! Clean residual mean=-0.000000 rms=0.000311 Jy/beam ! Combined flux in latest and established models = 0.223504 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 34 components and 0.223504 Jy ! Inverting map ! Added new window around map position (-0.2, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200685 Jy ! Component: 100 - total flux cleaned = 0.00364377 Jy ! Component: 150 - total flux cleaned = 0.00503245 Jy ! Component: 200 - total flux cleaned = 0.0062509 Jy ! Total flux subtracted in 200 components = 0.0062509 Jy ! Clean residual min=-0.000913 max=0.001095 Jy/beam ! Clean residual mean=0.000000 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.229755 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 66 components and 0.229755 Jy ! Inverting map ! Added new window around map position (-33.8, -11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117553 Jy ! Component: 100 - total flux cleaned = 0.00218807 Jy ! Component: 150 - total flux cleaned = 0.00311163 Jy ! Component: 200 - total flux cleaned = 0.00395521 Jy ! Total flux subtracted in 200 components = 0.00395521 Jy ! Clean residual min=-0.000864 max=0.000828 Jy/beam ! Clean residual mean=0.000000 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.233711 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 87 components and 0.233711 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.413 mas, bmaj=2.585 mas, bpa=61.24 degrees ! Estimated noise=0.21008 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128869 Jy ! Component: 100 - total flux cleaned = 0.00223407 Jy ! Component: 150 - total flux cleaned = 0.00285681 Jy ! Component: 200 - total flux cleaned = 0.00339611 Jy ! Total flux subtracted in 200 components = 0.00339611 Jy ! Clean residual min=-0.000845 max=0.000826 Jy/beam ! Clean residual mean=0.000001 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.237107 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000355584 Jy ! Component: 100 - total flux cleaned = 0.000718569 Jy ! Component: 150 - total flux cleaned = 0.00104551 Jy ! Component: 200 - total flux cleaned = 0.00132504 Jy ! Total flux subtracted in 200 components = 0.00132504 Jy ! Clean residual min=-0.000789 max=0.000730 Jy/beam ! Clean residual mean=0.000001 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.238432 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 149 components and 0.238432 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.018 mas, bmaj=1.132 mas, bpa=64.11 degrees ! Estimated noise=0.159074 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000403822 Jy ! Component: 100 - total flux cleaned = 0.000639973 Jy ! Component: 150 - total flux cleaned = 0.000778557 Jy ! Component: 200 - total flux cleaned = 0.000889753 Jy ! Total flux subtracted in 200 components = 0.000889753 Jy ! Clean residual min=-0.000790 max=0.000771 Jy/beam ! Clean residual mean=0.000000 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.239321 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 173 components and 0.239321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055976Jy sigma=1.233095 ! Fit after self-cal, rms=0.055973Jy sigma=1.233037 wmodel J1506+8319_X_map.mod ! Writing 173 model components to file: J1506+8319_X_map.mod wobs J1506+8319_X_uvs.fits ! Writing UV FITS file: J1506+8319_X_uvs.fits wwins J1506+8319_X_map.win ! wwins: Wrote 11 windows to J1506+8319_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.87425e-07 Jy ! Component: 100 - total flux cleaned = -2.80159e-05 Jy ! Component: 150 - total flux cleaned = -2.07362e-06 Jy ! Component: 200 - total flux cleaned = -4.01851e-05 Jy ! Component: 250 - total flux cleaned = -7.73868e-05 Jy ! Component: 300 - total flux cleaned = -0.000126336 Jy ! Component: 350 - total flux cleaned = -0.000138437 Jy ! Component: 400 - total flux cleaned = -0.000197968 Jy ! Component: 450 - total flux cleaned = -0.000221413 Jy ! Component: 500 - total flux cleaned = -0.000267639 Jy ! Component: 550 - total flux cleaned = -0.000324692 Jy ! Component: 600 - total flux cleaned = -0.000335884 Jy ! Component: 650 - total flux cleaned = -0.000347017 Jy ! Component: 700 - total flux cleaned = -0.00034685 Jy ! Component: 750 - total flux cleaned = -0.000313923 Jy ! Component: 800 - total flux cleaned = -0.000346562 Jy ! Component: 850 - total flux cleaned = -0.000324972 Jy ! Component: 900 - total flux cleaned = -0.000335596 Jy ! Component: 950 - total flux cleaned = -0.000346171 Jy ! Component: 1000 - total flux cleaned = -0.000335548 Jy ! Component: 1050 - total flux cleaned = -0.00032525 Jy ! Component: 1100 - total flux cleaned = -0.000345948 Jy ! Component: 1150 - total flux cleaned = -0.000345843 Jy ! Component: 1200 - total flux cleaned = -0.000345797 Jy ! Component: 1250 - total flux cleaned = -0.000315823 Jy ! Component: 1300 - total flux cleaned = -0.000315878 Jy ! Component: 1350 - total flux cleaned = -0.000335809 Jy ! Component: 1400 - total flux cleaned = -0.000345672 Jy ! Component: 1450 - total flux cleaned = -0.000345747 Jy ! Component: 1500 - total flux cleaned = -0.000355428 Jy ! Component: 1550 - total flux cleaned = -0.000364974 Jy ! Component: 1600 - total flux cleaned = -0.000384061 Jy ! Component: 1650 - total flux cleaned = -0.00036521 Jy ! Component: 1700 - total flux cleaned = -0.000393531 Jy ! Component: 1750 - total flux cleaned = -0.000449714 Jy ! Component: 1800 - total flux cleaned = -0.000421787 Jy ! Component: 1850 - total flux cleaned = -0.000449548 Jy ! Component: 1900 - total flux cleaned = -0.000477156 Jy ! Component: 1950 - total flux cleaned = -0.000468091 Jy ! Component: 2000 - total flux cleaned = -0.000458979 Jy ! Component: 2050 - total flux cleaned = -0.000513092 Jy ! Component: 2100 - total flux cleaned = -0.00051314 Jy ! Component: 2150 - total flux cleaned = -0.000566639 Jy ! Component: 2200 - total flux cleaned = -0.000566648 Jy ! Component: 2250 - total flux cleaned = -0.000619599 Jy ! Component: 2300 - total flux cleaned = -0.000628354 Jy ! Component: 2350 - total flux cleaned = -0.000680692 Jy ! Component: 2400 - total flux cleaned = -0.000689271 Jy ! Component: 2450 - total flux cleaned = -0.000680592 Jy ! Component: 2500 - total flux cleaned = -0.000706419 Jy ! Component: 2550 - total flux cleaned = -0.000749213 Jy ! Component: 2600 - total flux cleaned = -0.000723701 Jy ! Component: 2650 - total flux cleaned = -0.000774485 Jy ! Component: 2700 - total flux cleaned = -0.000791383 Jy ! Component: 2750 - total flux cleaned = -0.000824948 Jy ! Component: 2800 - total flux cleaned = -0.000799922 Jy ! Component: 2850 - total flux cleaned = -0.000816556 Jy ! Component: 2900 - total flux cleaned = -0.000833042 Jy ! Component: 2950 - total flux cleaned = -0.000824806 Jy ! Component: 3000 - total flux cleaned = -0.000882211 Jy ! Component: 3050 - total flux cleaned = -0.000808702 Jy ! Component: 3100 - total flux cleaned = -0.000865658 Jy ! Component: 3150 - total flux cleaned = -0.000873704 Jy ! Component: 3200 - total flux cleaned = -0.00090595 Jy ! Component: 3250 - total flux cleaned = -0.000873761 Jy ! Component: 3300 - total flux cleaned = -0.000889754 Jy ! Component: 3350 - total flux cleaned = -0.000881807 Jy ! Component: 3400 - total flux cleaned = -0.000929387 Jy ! Component: 3450 - total flux cleaned = -0.000889918 Jy ! Component: 3500 - total flux cleaned = -0.0009214 Jy ! Component: 3550 - total flux cleaned = -0.00091352 Jy ! Component: 3600 - total flux cleaned = -0.000936894 Jy ! Component: 3650 - total flux cleaned = -0.000960207 Jy ! Component: 3700 - total flux cleaned = -0.000975695 Jy ! Component: 3750 - total flux cleaned = -0.000967937 Jy ! Component: 3800 - total flux cleaned = -0.0009372 Jy ! Component: 3850 - total flux cleaned = -0.000952502 Jy ! Component: 3900 - total flux cleaned = -0.000975404 Jy ! Component: 3950 - total flux cleaned = -0.00096788 Jy ! Component: 4000 - total flux cleaned = -0.000975405 Jy ! Component: 4050 - total flux cleaned = -0.000975412 Jy ! Total flux subtracted in 4096 components = -0.000952847 Jy ! Clean residual min=-0.000411 max=0.000435 Jy/beam ! Clean residual mean=-0.000000 rms=0.000126 Jy/beam ! Combined flux in latest and established models = 0.238369 Jy keep ! Adding 338 model components to the UV plane model. ! The established model now contains 511 components and 0.238368 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1506+8319_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.018 x 1.132 at 64.11 degrees (North through East) ! Clean map min=-0.00060119 max=0.16951 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1506+8319_X_map.fits wmodel /vlbi/uf001/uva//J1506+8319_X_map.mod ! Writing 511 model components to file: /vlbi/uf001/uva//J1506+8319_X_map.mod wobs /vlbi/uf001/uva//J1506+8319_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1506+8319_X_uvs.fits wwins /vlbi/uf001/uva//J1506+8319_X_map.win ! wwins: Wrote 12 windows to /vlbi/uf001/uva//J1506+8319_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.169513 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000126321 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.22356 0.22356 0.447119 0.894238 1.78848 3.57695 7.15391 14.3078 28.6156 57.2312 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.169 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1341.92 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1506+8319_X_dfm.log closed on Mon Jan 14 03:11:27 2019