! Started logfile: /vlbi/uf001/uva//J1504-0248_S_b_dfm.log on Mon Jan 14 03:10:13 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1504-0248_S_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1504-0248_S_b_uva.fits
! AN table 1: 72 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.875 visibilities/baseline/integration-bin.
! Found source: J1504-0248
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 5292 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1504-0248_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004136Jy  sigma=19.188686
! Fit after  self-cal, rms=0.944395Jy  sigma=18.076419
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.938 mas, bmaj=17.59 mas, bpa=-19.03 degrees
! Estimated noise=0.781862 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0431964 Jy
! Component: 100  -  total flux cleaned = 0.0539415 Jy
! Total flux subtracted in 100 components = 0.0539415 Jy
! Clean residual min=-0.004372 max=0.004588 Jy/beam
! Clean residual mean=0.000014 rms=0.001146 Jy/beam
! Combined flux in latest and established models = 0.0539415 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0539415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076417Jy  sigma=1.225792
! Fit after  self-cal, rms=0.075237Jy  sigma=1.203803
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.461 mas, bmaj=17.52 mas, bpa=-19.24 degrees
! Estimated noise=0.524882 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00776806 Jy
! Component: 100  -  total flux cleaned = 0.0119581 Jy
! Component: 150  -  total flux cleaned = 0.0145349 Jy
! Component: 200  -  total flux cleaned = 0.0155336 Jy
! Total flux subtracted in 200 components = 0.0155336 Jy
! Clean residual min=-0.002815 max=0.002839 Jy/beam
! Clean residual mean=0.000001 rms=0.000754 Jy/beam
! Combined flux in latest and established models = 0.0694751 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 29 components and 0.0694751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074352Jy  sigma=1.186788
! Fit after  self-cal, rms=0.074260Jy  sigma=1.185674
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.461 x 17.52 at -19.24 degrees (North through East)
! Clean map  min=-0.0026091  max=0.057745 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.77     FD        0.94     HN        1.09     KP        0.92     
!   LA        0.93     MK        1.01     NL        1.03     OV        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.75     FD        0.99     HN        1.03     KP        0.97     
!   LA        1.02     MK        1.04     NL        0.94     OV        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.98     HN        1.07     KP        1.02     
!   LA        1.00     MK        1.05     NL        1.00     OV        1.10     
! 
! 
! Fit before self-cal, rms=0.074260Jy  sigma=1.185674
! Fit after  self-cal, rms=0.069735Jy  sigma=1.181113
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.533 mas, bmaj=17.01 mas, bpa=-19.28 degrees
! Estimated noise=0.519151 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000867885 Jy
! Component: 100  -  total flux cleaned = 0.00131343 Jy
! Component: 150  -  total flux cleaned = 0.00148134 Jy
! Component: 200  -  total flux cleaned = 0.00165175 Jy
! Total flux subtracted in 200 components = 0.00165175 Jy
! Clean residual min=-0.002714 max=0.002607 Jy/beam
! Clean residual mean=0.000002 rms=0.000639 Jy/beam
! Combined flux in latest and established models = 0.0711268 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 47 components and 0.0711268 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069696Jy  sigma=1.180654
! Fit after  self-cal, rms=0.069662Jy  sigma=1.180265
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069662Jy  sigma=1.180265
! Fit after  self-cal, rms=0.069948Jy  sigma=1.178336
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.535 mas, bmaj=16.96 mas, bpa=-19.31 degrees
! Estimated noise=0.521255 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000712563 Jy
! Component: 100  -  total flux cleaned = 0.000819794 Jy
! Component: 150  -  total flux cleaned = 0.000798907 Jy
! Component: 200  -  total flux cleaned = 0.000776284 Jy
! Total flux subtracted in 200 components = 0.000776284 Jy
! Clean residual min=-0.002454 max=0.002632 Jy/beam
! Clean residual mean=0.000000 rms=0.000586 Jy/beam
! Combined flux in latest and established models = 0.0719031 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 60 components and 0.0719031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069925Jy  sigma=1.177996
! Fit after  self-cal, rms=0.069949Jy  sigma=1.177814
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-116, 50.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122961 Jy
! Component: 100  -  total flux cleaned = 0.00106585 Jy
! Component: 150  -  total flux cleaned = 0.000976512 Jy
! Component: 200  -  total flux cleaned = 0.000793783 Jy
! Total flux subtracted in 200 components = 0.000793783 Jy
! Clean residual min=-0.002274 max=0.002168 Jy/beam
! Clean residual mean=-0.000002 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 0.0726969 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 77 components and 0.0726969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069846Jy  sigma=1.176116
! Fit after  self-cal, rms=0.069825Jy  sigma=1.175794
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069825Jy  sigma=1.175794
! Fit after  self-cal, rms=0.069650Jy  sigma=1.175654
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.526 mas, bmaj=16.96 mas, bpa=-19.29 degrees
! Estimated noise=0.519335 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000132071 Jy
! Component: 100  -  total flux cleaned = 0.000134031 Jy
! Component: 150  -  total flux cleaned = -7.36845e-05 Jy
! Component: 200  -  total flux cleaned = -0.000168234 Jy
! Total flux subtracted in 200 components = -0.000168234 Jy
! Clean residual min=-0.002240 max=0.002019 Jy/beam
! Clean residual mean=-0.000001 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.0725286 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 92 components and 0.0725286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069602Jy  sigma=1.174874
! Fit after  self-cal, rms=0.069598Jy  sigma=1.174763
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00026908 Jy
! Component: 100  -  total flux cleaned = -0.000395475 Jy
! Component: 150  -  total flux cleaned = -0.000423264 Jy
! Component: 200  -  total flux cleaned = -0.000530022 Jy
! Total flux subtracted in 200 components = -0.000530022 Jy
! Clean residual min=-0.002237 max=0.002046 Jy/beam
! Clean residual mean=-0.000001 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.0719986 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 99 components and 0.0719986 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069569Jy  sigma=1.174341
! Fit after  self-cal, rms=0.069562Jy  sigma=1.174293
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069562Jy  sigma=1.174293
! Fit after  self-cal, rms=0.069260Jy  sigma=1.174208
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.386 mas, bmaj=16.84 mas, bpa=-17.91 degrees
! Estimated noise=0.627422 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.87931e-05 Jy
! Component: 100  -  total flux cleaned = -8.58023e-06 Jy
! Component: 150  -  total flux cleaned = -7.85315e-05 Jy
! Component: 200  -  total flux cleaned = -0.000206115 Jy
! Total flux subtracted in 200 components = -0.000206115 Jy
! Clean residual min=-0.002025 max=0.001855 Jy/beam
! Clean residual mean=-0.000000 rms=0.000530 Jy/beam
! Combined flux in latest and established models = 0.0717925 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 125 components and 0.0717925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069243Jy  sigma=1.173966
! Fit after  self-cal, rms=0.069242Jy  sigma=1.173917
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000311158 Jy
! Component: 100  -  total flux cleaned = -0.000230202 Jy
! Component: 150  -  total flux cleaned = -0.000251589 Jy
! Component: 200  -  total flux cleaned = -0.000319623 Jy
! Total flux subtracted in 200 components = -0.000319623 Jy
! Clean residual min=-0.002023 max=0.001831 Jy/beam
! Clean residual mean=-0.000000 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.0714729 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 131 components and 0.0714729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069231Jy  sigma=1.173814
! Fit after  self-cal, rms=0.069230Jy  sigma=1.173790
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.518 mas, bmaj=16.93 mas, bpa=-19.25 degrees
! Estimated noise=0.517296 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.518 x 16.93 at -19.25 degrees (North through East)
! Clean map  min=-0.002465  max=0.05707 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.981 mas, bmaj=17.08 mas, bpa=-19.04 degrees
! Estimated noise=0.778487 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0437203 Jy
! Component: 100  -  total flux cleaned = 0.0549118 Jy
! Component: 150  -  total flux cleaned = 0.0609125 Jy
! Component: 200  -  total flux cleaned = 0.0644955 Jy
! Total flux subtracted in 200 components = 0.0644955 Jy
! Clean residual min=-0.004084 max=0.003411 Jy/beam
! Clean residual mean=0.000008 rms=0.001003 Jy/beam
! Combined flux in latest and established models = 0.0644955 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.0644955 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.518 mas, bmaj=16.93 mas, bpa=-19.25 degrees
! Estimated noise=0.517296 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00326168 Jy
! Component: 100  -  total flux cleaned = 0.00434918 Jy
! Component: 150  -  total flux cleaned = 0.00495932 Jy
! Component: 200  -  total flux cleaned = 0.00555566 Jy
! Total flux subtracted in 200 components = 0.00555566 Jy
! Clean residual min=-0.002572 max=0.002370 Jy/beam
! Clean residual mean=0.000004 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 0.0700512 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 62 components and 0.0700512 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.386 mas, bmaj=16.84 mas, bpa=-17.91 degrees
! Estimated noise=0.627422 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013445 Jy
! Component: 100  -  total flux cleaned = 0.00140768 Jy
! Component: 150  -  total flux cleaned = 0.00134909 Jy
! Component: 200  -  total flux cleaned = 0.0015178 Jy
! Total flux subtracted in 200 components = 0.0015178 Jy
! Clean residual min=-0.002041 max=0.001986 Jy/beam
! Clean residual mean=0.000002 rms=0.000548 Jy/beam
! Combined flux in latest and established models = 0.071569 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000175341 Jy
! Component: 100  -  total flux cleaned = 0.000236531 Jy
! Component: 150  -  total flux cleaned = 0.000265182 Jy
! Component: 200  -  total flux cleaned = 0.000166794 Jy
! Total flux subtracted in 200 components = 0.000166794 Jy
! Clean residual min=-0.001998 max=0.001915 Jy/beam
! Clean residual mean=0.000001 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.0717358 Jy
! Adding 71 model components to the UV plane model.
! The established model now contains 133 components and 0.0717358 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.518 mas, bmaj=16.93 mas, bpa=-19.25 degrees
! Estimated noise=0.517296 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000200681 Jy
! Component: 100  -  total flux cleaned = -0.000407615 Jy
! Component: 150  -  total flux cleaned = -0.000626421 Jy
! Component: 200  -  total flux cleaned = -0.000526958 Jy
! Total flux subtracted in 200 components = -0.000526958 Jy
! Clean residual min=-0.002418 max=0.002142 Jy/beam
! Clean residual mean=0.000001 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.0712088 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 158 components and 0.0712088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069277Jy  sigma=1.174596
! Fit after  self-cal, rms=0.069294Jy  sigma=1.174433
wmodel J1504-0248_S_b_map.mod
! Writing 158 model components to file: J1504-0248_S_b_map.mod
wobs   J1504-0248_S_b_uvs.fits
! Writing UV FITS file: J1504-0248_S_b_uvs.fits
wwins  J1504-0248_S_b_map.win
! wwins: Wrote 2 windows to J1504-0248_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000527875 Jy
! Component: 100  -  total flux cleaned = -0.001081 Jy
! Component: 150  -  total flux cleaned = -0.00145384 Jy
! Component: 200  -  total flux cleaned = -0.00168536 Jy
! Component: 250  -  total flux cleaned = -0.00184814 Jy
! Component: 300  -  total flux cleaned = -0.00197535 Jy
! Component: 350  -  total flux cleaned = -0.0019272 Jy
! Component: 400  -  total flux cleaned = -0.00185832 Jy
! Component: 450  -  total flux cleaned = -0.00183594 Jy
! Component: 500  -  total flux cleaned = -0.0017498 Jy
! Component: 550  -  total flux cleaned = -0.00170896 Jy
! Component: 600  -  total flux cleaned = -0.00166944 Jy
! Component: 650  -  total flux cleaned = -0.00165038 Jy
! Component: 700  -  total flux cleaned = -0.00159347 Jy
! Component: 750  -  total flux cleaned = -0.00159373 Jy
! Component: 800  -  total flux cleaned = -0.00154036 Jy
! Component: 850  -  total flux cleaned = -0.00152342 Jy
! Component: 900  -  total flux cleaned = -0.00145502 Jy
! Component: 950  -  total flux cleaned = -0.00135404 Jy
! Component: 1000  -  total flux cleaned = -0.00127203 Jy
! Component: 1050  -  total flux cleaned = -0.00119175 Jy
! Component: 1100  -  total flux cleaned = -0.00116006 Jy
! Component: 1150  -  total flux cleaned = -0.00108261 Jy
! Component: 1200  -  total flux cleaned = -0.00108264 Jy
! Component: 1250  -  total flux cleaned = -0.00100841 Jy
! Component: 1300  -  total flux cleaned = -0.000994099 Jy
! Component: 1350  -  total flux cleaned = -0.000965427 Jy
! Component: 1400  -  total flux cleaned = -0.000937182 Jy
! Component: 1450  -  total flux cleaned = -0.000923301 Jy
! Component: 1500  -  total flux cleaned = -0.000882258 Jy
! Component: 1550  -  total flux cleaned = -0.000829035 Jy
! Component: 1600  -  total flux cleaned = -0.000776471 Jy
! Component: 1650  -  total flux cleaned = -0.000724731 Jy
! Component: 1700  -  total flux cleaned = -0.000661148 Jy
! Component: 1750  -  total flux cleaned = -0.00061092 Jy
! Component: 1800  -  total flux cleaned = -0.000561728 Jy
! Component: 1850  -  total flux cleaned = -0.000476573 Jy
! Component: 1900  -  total flux cleaned = -0.000440606 Jy
! Component: 1950  -  total flux cleaned = -0.000393062 Jy
! Component: 2000  -  total flux cleaned = -0.000311208 Jy
! Component: 2050  -  total flux cleaned = -0.000230621 Jy
! Component: 2100  -  total flux cleaned = -0.000151519 Jy
! Component: 2150  -  total flux cleaned = -0.000129413 Jy
! Component: 2200  -  total flux cleaned = -0.000118354 Jy
! Component: 2250  -  total flux cleaned = -6.38496e-05 Jy
! Component: 2300  -  total flux cleaned = -2.07054e-05 Jy
! Component: 2350  -  total flux cleaned = -1.01505e-05 Jy
! Component: 2400  -  total flux cleaned = 2.12659e-05 Jy
! Component: 2450  -  total flux cleaned = 5.14129e-07 Jy
! Component: 2500  -  total flux cleaned = 3.13082e-05 Jy
! Component: 2550  -  total flux cleaned = 5.16342e-05 Jy
! Component: 2600  -  total flux cleaned = 6.16854e-05 Jy
! Component: 2650  -  total flux cleaned = 5.18642e-05 Jy
! Component: 2700  -  total flux cleaned = 5.1808e-05 Jy
! Component: 2750  -  total flux cleaned = 6.17317e-05 Jy
! Component: 2800  -  total flux cleaned = 6.19303e-05 Jy
! Component: 2850  -  total flux cleaned = 6.1823e-05 Jy
! Component: 2900  -  total flux cleaned = 9.00445e-05 Jy
! Component: 2950  -  total flux cleaned = 7.12892e-05 Jy
! Component: 3000  -  total flux cleaned = 8.98564e-05 Jy
! Component: 3050  -  total flux cleaned = 9.90137e-05 Jy
! Component: 3100  -  total flux cleaned = 0.000117242 Jy
! Component: 3150  -  total flux cleaned = 0.000126267 Jy
! Component: 3200  -  total flux cleaned = 0.000135219 Jy
! Component: 3250  -  total flux cleaned = 0.000135223 Jy
! Component: 3300  -  total flux cleaned = 0.000144055 Jy
! Component: 3350  -  total flux cleaned = 0.000161431 Jy
! Component: 3400  -  total flux cleaned = 0.000161352 Jy
! Component: 3450  -  total flux cleaned = 0.000170022 Jy
! Component: 3500  -  total flux cleaned = 0.000195567 Jy
! Component: 3550  -  total flux cleaned = 0.000187037 Jy
! Component: 3600  -  total flux cleaned = 0.000170302 Jy
! Component: 3650  -  total flux cleaned = 0.000195273 Jy
! Component: 3700  -  total flux cleaned = 0.000203513 Jy
! Component: 3750  -  total flux cleaned = 0.000203443 Jy
! Component: 3800  -  total flux cleaned = 0.000179069 Jy
! Component: 3850  -  total flux cleaned = 0.000187218 Jy
! Component: 3900  -  total flux cleaned = 0.000179248 Jy
! Component: 3950  -  total flux cleaned = 0.000179234 Jy
! Component: 4000  -  total flux cleaned = 0.00017126 Jy
! Component: 4050  -  total flux cleaned = 0.000171222 Jy
! Total flux subtracted in 4096 components = 0.000147709 Jy
! Clean residual min=-0.000425 max=0.000415 Jy/beam
! Clean residual mean=-0.000001 rms=0.000146 Jy/beam
! Combined flux in latest and established models = 0.0713565 Jy
keep
! Adding 277 model components to the UV plane model.
! The established model now contains 435 components and 0.0713565 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1504-0248_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.518 x 16.93 at -19.25 degrees (North through East)
! Clean map  min=-0.0024423  max=0.056823 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1504-0248_S_b_map.fits
wmodel /vlbi/uf001/uva//J1504-0248_S_b_map.mod
! Writing 435 model components to file: /vlbi/uf001/uva//J1504-0248_S_b_map.mod
wobs   /vlbi/uf001/uva//J1504-0248_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1504-0248_S_b_uvs.fits
wwins  /vlbi/uf001/uva//J1504-0248_S_b_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J1504-0248_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0568232 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00014804 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.781583 0.781583 1.56317 3.12633 6.25266 12.5053 25.0106 50.0213
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.056 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  383.836 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1504-0248_S_b_dfm.log closed on Mon Jan 14 03:10:17 2019