! Started logfile: /vlbi/uf001/uvm//J1504+1029_S_a_dfm.log on Sun Jan 13 21:50:15 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J1504+1029_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J1504+1029_S_a_uvm.fits
! AN table 1: 8 integrations on 1 of 1 possible baselines.
! AN table 2: 12 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.923077 visibilities/baseline/integration-bin.
! Found source: J1504+1029
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 720 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1504+1029_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 16 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 16 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 16 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.825852Jy  sigma=19.701664
! Fit after  self-cal, rms=0.547469Jy  sigma=5.395766
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.611 mas, bmaj=14.77 mas, bpa=-18.43 degrees
! Estimated noise=3.15786 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.06485 Jy
! Component: 100  -  total flux cleaned = 1.31624 Jy
! Total flux subtracted in 100 components = 1.31624 Jy
! Clean residual min=-0.065673 max=0.106618 Jy/beam
! Clean residual mean=-0.001009 rms=0.024605 Jy/beam
! Combined flux in latest and established models = 1.31624 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 1.31624 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.341277Jy  sigma=3.581273
! Fit after  self-cal, rms=0.340788Jy  sigma=3.577424
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.322 mas, bmaj=14.09 mas, bpa=-23.91 degrees
! Estimated noise=2.66176 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.158192 Jy
! Component: 100  -  total flux cleaned = 0.251161 Jy
! Component: 150  -  total flux cleaned = 0.308286 Jy
! Component: 200  -  total flux cleaned = 0.344769 Jy
! Total flux subtracted in 200 components = 0.344769 Jy
! Clean residual min=-0.061703 max=0.068015 Jy/beam
! Clean residual mean=-0.000346 rms=0.021342 Jy/beam
! Combined flux in latest and established models = 1.66101 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 71 components and 1.66101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.231778Jy  sigma=2.759971
! Fit after  self-cal, rms=0.230792Jy  sigma=2.750417
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.322 x 14.09 at -23.91 degrees (North through East)
! Clean map  min=-0.062812  max=1.3909 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.95     HN        1.09     KP        0.97     LA        0.91     
!   NL        0.88     OV        1.08     PT        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.91     HN        1.10     KP        0.99     LA        0.90     
!   NL        1.00     OV        1.00     PT        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.87     HN        1.10     KP        0.99     LA        0.91     
!   NL        1.33     OV        0.98     PT        1.01     
! 
! 
! Fit before self-cal, rms=0.230792Jy  sigma=2.750417
! Fit after  self-cal, rms=0.178573Jy  sigma=1.925527
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.53 mas, bmaj=14.2 mas, bpa=-23.83 degrees
! Estimated noise=2.65039 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0418634 Jy
! Component: 100  -  total flux cleaned = -0.0502042 Jy
! Component: 150  -  total flux cleaned = -0.0529156 Jy
! Component: 200  -  total flux cleaned = -0.0529488 Jy
! Total flux subtracted in 200 components = -0.0529488 Jy
! Clean residual min=-0.036218 max=0.040653 Jy/beam
! Clean residual mean=0.000061 rms=0.012365 Jy/beam
! Combined flux in latest and established models = 1.60806 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 91 components and 1.60806 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.167773Jy  sigma=1.798597
! Fit after  self-cal, rms=0.166669Jy  sigma=1.788025
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.166669Jy  sigma=1.788025
! Fit after  self-cal, rms=0.118302Jy  sigma=1.180838
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.468 mas, bmaj=14.34 mas, bpa=-23.15 degrees
! Estimated noise=2.63937 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0127764 Jy
! Component: 100  -  total flux cleaned = -0.0201024 Jy
! Component: 150  -  total flux cleaned = -0.0251649 Jy
! Component: 200  -  total flux cleaned = -0.0285394 Jy
! Total flux subtracted in 200 components = -0.0285394 Jy
! Clean residual min=-0.026211 max=0.026905 Jy/beam
! Clean residual mean=0.000188 rms=0.007702 Jy/beam
! Combined flux in latest and established models = 1.57952 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 131 components and 1.57952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.110766Jy  sigma=1.094346
! Fit after  self-cal, rms=0.110096Jy  sigma=1.086049
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.38748e-05 Jy
! Component: 100  -  total flux cleaned = -0.00197012 Jy
! Component: 150  -  total flux cleaned = -0.00354481 Jy
! Component: 200  -  total flux cleaned = -0.00429579 Jy
! Total flux subtracted in 200 components = -0.00429579 Jy
! Clean residual min=-0.026229 max=0.024512 Jy/beam
! Clean residual mean=0.000169 rms=0.007463 Jy/beam
! Combined flux in latest and established models = 1.57522 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 168 components and 1.57522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108584Jy  sigma=1.068204
! Fit after  self-cal, rms=0.108217Jy  sigma=1.062367
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108217Jy  sigma=1.062367
! Fit after  self-cal, rms=0.103729Jy  sigma=1.029013
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.447 mas, bmaj=14.41 mas, bpa=-22.75 degrees
! Estimated noise=2.64315 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00887383 Jy
! Component: 100  -  total flux cleaned = -0.0125173 Jy
! Component: 150  -  total flux cleaned = -0.0147573 Jy
! Component: 200  -  total flux cleaned = -0.0168101 Jy
! Total flux subtracted in 200 components = -0.0168101 Jy
! Clean residual min=-0.023343 max=0.021576 Jy/beam
! Clean residual mean=0.000206 rms=0.006216 Jy/beam
! Combined flux in latest and established models = 1.55841 Jy
selfcal
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 185 components and 1.55841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100547Jy  sigma=0.990633
! Fit after  self-cal, rms=0.100421Jy  sigma=0.987649
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000105572 Jy
! Component: 100  -  total flux cleaned = -0.000673033 Jy
! Component: 150  -  total flux cleaned = -0.000974105 Jy
! Component: 200  -  total flux cleaned = -0.00109906 Jy
! Total flux subtracted in 200 components = -0.00109906 Jy
! Clean residual min=-0.023325 max=0.020363 Jy/beam
! Clean residual mean=0.000200 rms=0.006102 Jy/beam
! Combined flux in latest and established models = 1.55731 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 198 components and 1.55731 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099794Jy  sigma=0.979671
! Fit after  self-cal, rms=0.099724Jy  sigma=0.977503
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099724Jy  sigma=0.977503
! Fit after  self-cal, rms=0.096878Jy  sigma=0.959134
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.55 mas, bmaj=15.35 mas, bpa=-35.65 degrees
! Estimated noise=2.7998 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00825055 Jy
! Component: 100  -  total flux cleaned = -0.00983337 Jy
! Component: 150  -  total flux cleaned = -0.0108537 Jy
! Component: 200  -  total flux cleaned = -0.0117522 Jy
! Total flux subtracted in 200 components = -0.0117522 Jy
! Clean residual min=-0.020579 max=0.018692 Jy/beam
! Clean residual mean=0.000252 rms=0.005842 Jy/beam
! Combined flux in latest and established models = 1.54556 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 215 components and 1.54556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095256Jy  sigma=0.940401
! Fit after  self-cal, rms=0.095244Jy  sigma=0.938747
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.02507e-05 Jy
! Component: 100  -  total flux cleaned = -0.000661114 Jy
! Component: 150  -  total flux cleaned = -0.00105004 Jy
! Component: 200  -  total flux cleaned = -0.00129941 Jy
! Total flux subtracted in 200 components = -0.00129941 Jy
! Clean residual min=-0.020550 max=0.018136 Jy/beam
! Clean residual mean=0.000245 rms=0.005793 Jy/beam
! Combined flux in latest and established models = 1.54426 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 219 components and 1.54426 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094940Jy  sigma=0.935284
! Fit after  self-cal, rms=0.094924Jy  sigma=0.933731
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=7.429 mas, bmaj=14.44 mas, bpa=-22.46 degrees
! Estimated noise=2.64571 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.429 x 14.44 at -22.46 degrees (North through East)
! Clean map  min=-0.020342  max=1.3727 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094924Jy  sigma=0.933731
! Fit after  self-cal, rms=0.087042Jy  sigma=0.838154
! Inverting map and beam 
! Estimated beam: bmin=7.411 mas, bmaj=14.46 mas, bpa=-22.24 degrees
! Estimated noise=2.64718 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00671612 Jy
! Component: 100  -  total flux cleaned = -0.00844414 Jy
! Component: 150  -  total flux cleaned = -0.00978925 Jy
! Component: 200  -  total flux cleaned = -0.0100205 Jy
! Total flux subtracted in 200 components = -0.0100205 Jy
! Clean residual min=-0.018542 max=0.016131 Jy/beam
! Clean residual mean=0.000175 rms=0.004782 Jy/beam
! Combined flux in latest and established models = 1.53424 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 229 components and 1.53424 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085914Jy  sigma=0.823130
! Fit after  self-cal, rms=0.085943Jy  sigma=0.822254
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103361 Jy
! Component: 100  -  total flux cleaned = 0.00113222 Jy
! Component: 150  -  total flux cleaned = 0.00131416 Jy
! Component: 200  -  total flux cleaned = 0.00148689 Jy
! Total flux subtracted in 200 components = 0.00148689 Jy
! Clean residual min=-0.018493 max=0.015411 Jy/beam
! Clean residual mean=0.000181 rms=0.004728 Jy/beam
! Combined flux in latest and established models = 1.53573 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 237 components and 1.53573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085781Jy  sigma=0.818835
! Fit after  self-cal, rms=0.085814Jy  sigma=0.818548
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085814Jy  sigma=0.818548
! Fit after  self-cal, rms=0.084345Jy  sigma=0.810159
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.644 mas, bmaj=15.31 mas, bpa=-17.85 degrees
! Estimated noise=3.14361 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.05805 Jy
! Component: 100  -  total flux cleaned = 1.31323 Jy
! Component: 150  -  total flux cleaned = 1.41115 Jy
! Component: 200  -  total flux cleaned = 1.46257 Jy
! Total flux subtracted in 200 components = 1.46257 Jy
! Clean residual min=-0.027564 max=0.028608 Jy/beam
! Clean residual mean=-0.000099 rms=0.008102 Jy/beam
! Combined flux in latest and established models = 1.46257 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 41 model components to the UV plane model.
! The established model now contains 41 components and 1.46257 Jy
! Inverting map and beam 
! Estimated beam: bmin=7.399 mas, bmaj=14.47 mas, bpa=-22.08 degrees
! Estimated noise=2.64789 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0367898 Jy
! Component: 100  -  total flux cleaned = 0.0472744 Jy
! Component: 150  -  total flux cleaned = 0.0536265 Jy
! Component: 200  -  total flux cleaned = 0.0585765 Jy
! Total flux subtracted in 200 components = 0.0585765 Jy
! Clean residual min=-0.021940 max=0.016309 Jy/beam
! Clean residual mean=0.000120 rms=0.005180 Jy/beam
! Combined flux in latest and established models = 1.52115 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 68 components and 1.52115 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.57 mas, bmaj=15.34 mas, bpa=-34.91 degrees
! Estimated noise=2.80336 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00512692 Jy
! Component: 100  -  total flux cleaned = 0.00587355 Jy
! Component: 150  -  total flux cleaned = 0.00645828 Jy
! Component: 200  -  total flux cleaned = 0.0069122 Jy
! Total flux subtracted in 200 components = 0.0069122 Jy
! Clean residual min=-0.019947 max=0.014897 Jy/beam
! Clean residual mean=0.000195 rms=0.004922 Jy/beam
! Combined flux in latest and established models = 1.52806 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000389315 Jy
! Component: 100  -  total flux cleaned = 0.000729915 Jy
! Component: 150  -  total flux cleaned = 0.00104394 Jy
! Component: 200  -  total flux cleaned = 0.000901386 Jy
! Total flux subtracted in 200 components = 0.000901386 Jy
! Clean residual min=-0.018673 max=0.014714 Jy/beam
! Clean residual mean=0.000203 rms=0.004786 Jy/beam
! Combined flux in latest and established models = 1.52896 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 94 components and 1.52896 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=7.399 mas, bmaj=14.47 mas, bpa=-22.08 degrees
! Estimated noise=2.64789 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00114521 Jy
! Component: 100  -  total flux cleaned = 0.00114215 Jy
! Component: 150  -  total flux cleaned = 0.000942244 Jy
! Component: 200  -  total flux cleaned = 0.0014924 Jy
! Total flux subtracted in 200 components = 0.0014924 Jy
! Clean residual min=-0.017705 max=0.015173 Jy/beam
! Clean residual mean=0.000164 rms=0.004470 Jy/beam
! Combined flux in latest and established models = 1.53046 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 109 components and 1.53046 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083843Jy  sigma=0.800111
! Fit after  self-cal, rms=0.083653Jy  sigma=0.793013
wmodel J1504+1029_S_a_map.mod
! Writing 109 model components to file: J1504+1029_S_a_map.mod
wobs   J1504+1029_S_a_uvs.fits
! Writing UV FITS file: J1504+1029_S_a_uvs.fits
wwins  J1504+1029_S_a_map.win
! wwins: Wrote 1 windows to J1504+1029_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00385483 Jy
! Component: 100  -  total flux cleaned = -0.00210401 Jy
! Component: 150  -  total flux cleaned = -0.002326 Jy
! Component: 200  -  total flux cleaned = -0.00169903 Jy
! Component: 250  -  total flux cleaned = -0.00150272 Jy
! Component: 300  -  total flux cleaned = -0.00074426 Jy
! Component: 350  -  total flux cleaned = -2.92234e-05 Jy
! Component: 400  -  total flux cleaned = 0.000987713 Jy
! Component: 450  -  total flux cleaned = 0.00210728 Jy
! Component: 500  -  total flux cleaned = 0.00301531 Jy
! Component: 550  -  total flux cleaned = 0.00388189 Jy
! Component: 600  -  total flux cleaned = 0.00470917 Jy
! Component: 650  -  total flux cleaned = 0.00563072 Jy
! Component: 700  -  total flux cleaned = 0.00625716 Jy
! Component: 750  -  total flux cleaned = 0.00698108 Jy
! Component: 800  -  total flux cleaned = 0.00755642 Jy
! Component: 850  -  total flux cleaned = 0.00865849 Jy
! Component: 900  -  total flux cleaned = 0.00982595 Jy
! Component: 950  -  total flux cleaned = 0.0113626 Jy
! Component: 1000  -  total flux cleaned = 0.0123495 Jy
! Component: 1050  -  total flux cleaned = 0.0133084 Jy
! Component: 1100  -  total flux cleaned = 0.0138673 Jy
! Component: 1150  -  total flux cleaned = 0.0144074 Jy
! Component: 1200  -  total flux cleaned = 0.0146695 Jy
! Component: 1250  -  total flux cleaned = 0.0150121 Jy
! Component: 1300  -  total flux cleaned = 0.0151794 Jy
! Component: 1350  -  total flux cleaned = 0.0153419 Jy
! Component: 1400  -  total flux cleaned = 0.0154212 Jy
! Component: 1450  -  total flux cleaned = 0.0154227 Jy
! Component: 1500  -  total flux cleaned = 0.0155723 Jy
! Component: 1550  -  total flux cleaned = 0.0154998 Jy
! Component: 1600  -  total flux cleaned = 0.0155009 Jy
! Component: 1650  -  total flux cleaned = 0.0154304 Jy
! Component: 1700  -  total flux cleaned = 0.0150856 Jy
! Component: 1750  -  total flux cleaned = 0.0150861 Jy
! Component: 1800  -  total flux cleaned = 0.0149531 Jy
! Component: 1850  -  total flux cleaned = 0.0148216 Jy
! Component: 1900  -  total flux cleaned = 0.0146295 Jy
! Component: 1950  -  total flux cleaned = 0.0145667 Jy
! Component: 2000  -  total flux cleaned = 0.014442 Jy
! Component: 2050  -  total flux cleaned = 0.014441 Jy
! Component: 2100  -  total flux cleaned = 0.0142612 Jy
! Component: 2150  -  total flux cleaned = 0.0143809 Jy
! Component: 2200  -  total flux cleaned = 0.0143221 Jy
! Component: 2250  -  total flux cleaned = 0.0142074 Jy
! Component: 2300  -  total flux cleaned = 0.0140935 Jy
! Component: 2350  -  total flux cleaned = 0.0140371 Jy
! Component: 2400  -  total flux cleaned = 0.0139255 Jy
! Component: 2450  -  total flux cleaned = 0.0138151 Jy
! Component: 2500  -  total flux cleaned = 0.0135982 Jy
! Component: 2550  -  total flux cleaned = 0.0134908 Jy
! Component: 2600  -  total flux cleaned = 0.0132259 Jy
! Component: 2650  -  total flux cleaned = 0.0131735 Jy
! Component: 2700  -  total flux cleaned = 0.0130167 Jy
! Component: 2750  -  total flux cleaned = 0.0128095 Jy
! Component: 2800  -  total flux cleaned = 0.0125019 Jy
! Component: 2850  -  total flux cleaned = 0.0124005 Jy
! Component: 2900  -  total flux cleaned = 0.0120977 Jy
! Component: 2950  -  total flux cleaned = 0.0119474 Jy
! Component: 3000  -  total flux cleaned = 0.0117978 Jy
! Component: 3050  -  total flux cleaned = 0.0116985 Jy
! Component: 3100  -  total flux cleaned = 0.0115015 Jy
! Component: 3150  -  total flux cleaned = 0.0112569 Jy
! Component: 3200  -  total flux cleaned = 0.0110621 Jy
! Component: 3250  -  total flux cleaned = 0.0109656 Jy
! Component: 3300  -  total flux cleaned = 0.0106774 Jy
! Component: 3350  -  total flux cleaned = 0.0105337 Jy
! Component: 3400  -  total flux cleaned = 0.0104388 Jy
! Component: 3450  -  total flux cleaned = 0.0102966 Jy
! Component: 3500  -  total flux cleaned = 0.0102495 Jy
! Component: 3550  -  total flux cleaned = 0.0101556 Jy
! Component: 3600  -  total flux cleaned = 0.0100153 Jy
! Component: 3650  -  total flux cleaned = 0.00996883 Jy
! Component: 3700  -  total flux cleaned = 0.00996883 Jy
! Component: 3750  -  total flux cleaned = 0.00992251 Jy
! Component: 3800  -  total flux cleaned = 0.00992221 Jy
! Component: 3850  -  total flux cleaned = 0.00992221 Jy
! Component: 3900  -  total flux cleaned = 0.00987615 Jy
! Component: 3950  -  total flux cleaned = 0.0099676 Jy
! Component: 4000  -  total flux cleaned = 0.00996766 Jy
! Component: 4050  -  total flux cleaned = 0.0101046 Jy
! Total flux subtracted in 4096 components = 0.0101504 Jy
! Clean residual min=-0.002398 max=0.002624 Jy/beam
! Clean residual mean=-0.000039 rms=0.000914 Jy/beam
! Combined flux in latest and established models = 1.54061 Jy
keep
! Adding 413 model components to the UV plane model.
! The established model now contains 522 components and 1.54061 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J1504+1029_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.399 x 14.47 at -22.08 degrees (North through East)
! Clean map  min=-0.010357  max=1.3713 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J1504+1029_S_a_map.fits
wmodel /vlbi/uf001/uvm//J1504+1029_S_a_map.mod
! Writing 522 model components to file: /vlbi/uf001/uvm//J1504+1029_S_a_map.mod
wobs   /vlbi/uf001/uvm//J1504+1029_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J1504+1029_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J1504+1029_S_a_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uvm//J1504+1029_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.37134 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000841646 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.184123 0.184123 0.368245 0.73649 1.47298 2.94596 5.89192 11.7838 23.5677 47.1354 94.2708
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0025 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.371 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1629.35 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J1504+1029_S_a_dfm.log closed on Sun Jan 13 21:50:20 2019