! Started logfile: /vlbi/uf001/uvm//J1444-0859_S_a_dfm.log on Sun Jan 13 21:48:42 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J1444-0859_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J1444-0859_S_a_uvm.fits
! AN table 1: 88 integrations on 36 of 36 possible baselines.
! AN table 2: 148 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.896745 visibilities/baseline/integration-bin.
! Found source: J1444-0859
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 19671 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1444-0859_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 98 telescope corrections were flagged in sub-array 1.
!  A total of 35 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 98 telescope corrections were flagged in sub-array 1.
!  A total of 35 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 98 telescope corrections were flagged in sub-array 1.
!  A total of 35 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.009859Jy  sigma=17.662603
! Fit after  self-cal, rms=0.913062Jy  sigma=15.905379
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.969 mas, bmaj=13.67 mas, bpa=-16.94 degrees
! Estimated noise=0.551236 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0714471 Jy
! Component: 100  -  total flux cleaned = 0.0872209 Jy
! Total flux subtracted in 100 components = 0.0872209 Jy
! Clean residual min=-0.004704 max=0.005213 Jy/beam
! Clean residual mean=-0.000011 rms=0.001221 Jy/beam
! Combined flux in latest and established models = 0.0872209 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0872209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096040Jy  sigma=1.285406
! Fit after  self-cal, rms=0.095565Jy  sigma=1.279631
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.629 mas, bmaj=14.81 mas, bpa=-16.49 degrees
! Estimated noise=0.305858 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00724623 Jy
! Component: 100  -  total flux cleaned = 0.0109356 Jy
! Component: 150  -  total flux cleaned = 0.0132015 Jy
! Component: 200  -  total flux cleaned = 0.0147537 Jy
! Total flux subtracted in 200 components = 0.0147537 Jy
! Clean residual min=-0.004057 max=0.003680 Jy/beam
! Clean residual mean=-0.000014 rms=0.000910 Jy/beam
! Combined flux in latest and established models = 0.101975 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 41 components and 0.101975 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095160Jy  sigma=1.267432
! Fit after  self-cal, rms=0.095091Jy  sigma=1.267104
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.629 x 14.81 at -16.49 degrees (North through East)
! Clean map  min=-0.0039364  max=0.093485 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.78     FD        0.98     HN        1.01     KP        0.98     
!   LA        0.90     MK        1.05     NL        1.07     OV        0.99     
!   PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.17     FD        0.97     HN        1.01     KP        1.13     
!   LA        1.27     MK        1.26     NL        1.00     OV        0.91     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.77     FD        1.11     HN        0.94     KP        1.04     
!   LA        0.89     MK        1.01     NL        1.04     OV        0.86     
!   PT        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.45     FD        0.93     HN        1.07     KP        0.95     
!   LA        0.95     MK        0.95     NL        0.96     OV        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     FD        1.08     HN        0.94     KP        1.04     
!   LA        0.86     MK        1.05     NL        0.98     OV        0.99     
!   PT        1.06     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.39     FD        0.95     HN        1.06     KP        0.94     
!   LA        0.91     MK        0.99     NL        1.04     OV        0.99     
! 
! 
! Fit before self-cal, rms=0.095091Jy  sigma=1.267104
! Fit after  self-cal, rms=0.104650Jy  sigma=1.243870
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.686 mas, bmaj=15.13 mas, bpa=-16.28 degrees
! Estimated noise=0.305476 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00152205 Jy
! Component: 100  -  total flux cleaned = -0.0019094 Jy
! Component: 150  -  total flux cleaned = -0.00202135 Jy
! Component: 200  -  total flux cleaned = -0.00199672 Jy
! Total flux subtracted in 200 components = -0.00199672 Jy
! Clean residual min=-0.002456 max=0.002495 Jy/beam
! Clean residual mean=-0.000018 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.0999779 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 51 components and 0.0999779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104607Jy  sigma=1.243473
! Fit after  self-cal, rms=0.104631Jy  sigma=1.242695
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104631Jy  sigma=1.242695
! Fit after  self-cal, rms=0.123070Jy  sigma=1.228843
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.684 mas, bmaj=15.11 mas, bpa=-16.55 degrees
! Estimated noise=0.305034 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000414076 Jy
! Component: 100  -  total flux cleaned = 0.000486614 Jy
! Component: 150  -  total flux cleaned = 0.000563659 Jy
! Component: 200  -  total flux cleaned = 0.000618114 Jy
! Total flux subtracted in 200 components = 0.000618114 Jy
! Clean residual min=-0.001670 max=0.001567 Jy/beam
! Clean residual mean=0.000002 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.100596 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 61 components and 0.100596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.123065Jy  sigma=1.228694
! Fit after  self-cal, rms=0.123421Jy  sigma=1.227844
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000306734 Jy
! Component: 100  -  total flux cleaned = -0.000305698 Jy
! Component: 150  -  total flux cleaned = -0.000305553 Jy
! Component: 200  -  total flux cleaned = -0.000294576 Jy
! Total flux subtracted in 200 components = -0.000294576 Jy
! Clean residual min=-0.001639 max=0.001461 Jy/beam
! Clean residual mean=0.000001 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.100301 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 73 components and 0.100301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.123419Jy  sigma=1.227761
! Fit after  self-cal, rms=0.123424Jy  sigma=1.227758
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.123424Jy  sigma=1.227758
! Fit after  self-cal, rms=0.130674Jy  sigma=1.227511
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.679 mas, bmaj=15.12 mas, bpa=-16.6 degrees
! Estimated noise=0.305116 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000194039 Jy
! Component: 100  -  total flux cleaned = 0.000235568 Jy
! Component: 150  -  total flux cleaned = 0.000259668 Jy
! Component: 200  -  total flux cleaned = 0.000282201 Jy
! Total flux subtracted in 200 components = 0.000282201 Jy
! Clean residual min=-0.001585 max=0.001455 Jy/beam
! Clean residual mean=0.000002 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.100584 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 81 components and 0.100584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.130671Jy  sigma=1.227429
! Fit after  self-cal, rms=0.130810Jy  sigma=1.227362
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000106456 Jy
! Component: 100  -  total flux cleaned = -8.63685e-05 Jy
! Component: 150  -  total flux cleaned = -7.69733e-05 Jy
! Component: 200  -  total flux cleaned = -6.85084e-05 Jy
! Total flux subtracted in 200 components = -6.85084e-05 Jy
! Clean residual min=-0.001574 max=0.001405 Jy/beam
! Clean residual mean=0.000002 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.100515 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 85 components and 0.100515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.130809Jy  sigma=1.227321
! Fit after  self-cal, rms=0.130813Jy  sigma=1.227319
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.130813Jy  sigma=1.227319
! Fit after  self-cal, rms=0.134143Jy  sigma=1.227278
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.601 mas, bmaj=16.76 mas, bpa=-9.597 degrees
! Estimated noise=0.36536 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000264484 Jy
! Component: 100  -  total flux cleaned = 0.000297085 Jy
! Component: 150  -  total flux cleaned = 0.000314921 Jy
! Component: 200  -  total flux cleaned = 0.000332354 Jy
! Total flux subtracted in 200 components = 0.000332354 Jy
! Clean residual min=-0.001566 max=0.001412 Jy/beam
! Clean residual mean=0.000004 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.100847 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 92 components and 0.100847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.134142Jy  sigma=1.227265
! Fit after  self-cal, rms=0.134191Jy  sigma=1.227247
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.33173e-05 Jy
! Component: 100  -  total flux cleaned = -1.23693e-05 Jy
! Component: 150  -  total flux cleaned = -2.04711e-05 Jy
! Component: 200  -  total flux cleaned = -3.51041e-05 Jy
! Total flux subtracted in 200 components = -3.51041e-05 Jy
! Clean residual min=-0.001553 max=0.001402 Jy/beam
! Clean residual mean=0.000003 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.100812 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 93 components and 0.100812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.134192Jy  sigma=1.227250
! Fit after  self-cal, rms=0.134197Jy  sigma=1.227248
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.676 mas, bmaj=15.12 mas, bpa=-16.64 degrees
! Estimated noise=0.305228 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.676 x 15.12 at -16.64 degrees (North through East)
! Clean map  min=-0.0014681  max=0.09279 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.012 mas, bmaj=13.81 mas, bpa=-17.08 degrees
! Estimated noise=0.557658 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0725569 Jy
! Component: 100  -  total flux cleaned = 0.0884799 Jy
! Component: 150  -  total flux cleaned = 0.0930956 Jy
! Component: 200  -  total flux cleaned = 0.0955064 Jy
! Total flux subtracted in 200 components = 0.0955064 Jy
! Clean residual min=-0.002540 max=0.002510 Jy/beam
! Clean residual mean=-0.000003 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.0955063 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0955063 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.676 mas, bmaj=15.12 mas, bpa=-16.64 degrees
! Estimated noise=0.305228 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00200033 Jy
! Component: 100  -  total flux cleaned = 0.00316667 Jy
! Component: 150  -  total flux cleaned = 0.00381548 Jy
! Component: 200  -  total flux cleaned = 0.00413987 Jy
! Total flux subtracted in 200 components = 0.00413987 Jy
! Clean residual min=-0.001557 max=0.001367 Jy/beam
! Clean residual mean=0.000001 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.0996462 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 57 components and 0.0996462 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.601 mas, bmaj=16.76 mas, bpa=-9.597 degrees
! Estimated noise=0.36536 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000639369 Jy
! Component: 100  -  total flux cleaned = 0.000826857 Jy
! Component: 150  -  total flux cleaned = 0.000960644 Jy
! Component: 200  -  total flux cleaned = 0.00108217 Jy
! Total flux subtracted in 200 components = 0.00108217 Jy
! Clean residual min=-0.001541 max=0.001454 Jy/beam
! Clean residual mean=0.000003 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.100728 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.69359e-05 Jy
! Component: 100  -  total flux cleaned = 0.000150291 Jy
! Component: 150  -  total flux cleaned = 0.000196957 Jy
! Component: 200  -  total flux cleaned = 0.000211178 Jy
! Total flux subtracted in 200 components = 0.000211178 Jy
! Clean residual min=-0.001544 max=0.001447 Jy/beam
! Clean residual mean=0.000003 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.10094 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 73 components and 0.10094 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.676 mas, bmaj=15.12 mas, bpa=-16.64 degrees
! Estimated noise=0.305228 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.15001e-05 Jy
! Component: 100  -  total flux cleaned = -1.25178e-05 Jy
! Component: 150  -  total flux cleaned = 6.08682e-05 Jy
! Component: 200  -  total flux cleaned = 7.21938e-05 Jy
! Total flux subtracted in 200 components = 7.21938e-05 Jy
! Clean residual min=-0.001539 max=0.001382 Jy/beam
! Clean residual mean=0.000002 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.101012 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 85 components and 0.101012 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.134198Jy  sigma=1.227253
! Fit after  self-cal, rms=0.134203Jy  sigma=1.227230
wmodel J1444-0859_S_a_map.mod
! Writing 85 model components to file: J1444-0859_S_a_map.mod
wobs   J1444-0859_S_a_uvs.fits
! Writing UV FITS file: J1444-0859_S_a_uvs.fits
wwins  J1444-0859_S_a_map.win
! wwins: Wrote 1 windows to J1444-0859_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000404747 Jy
! Component: 100  -  total flux cleaned = -0.000643799 Jy
! Component: 150  -  total flux cleaned = -0.000887903 Jy
! Component: 200  -  total flux cleaned = -0.00109888 Jy
! Component: 250  -  total flux cleaned = -0.0012793 Jy
! Component: 300  -  total flux cleaned = -0.00135677 Jy
! Component: 350  -  total flux cleaned = -0.00139416 Jy
! Component: 400  -  total flux cleaned = -0.00141255 Jy
! Component: 450  -  total flux cleaned = -0.00146529 Jy
! Component: 500  -  total flux cleaned = -0.00149947 Jy
! Component: 550  -  total flux cleaned = -0.00154937 Jy
! Component: 600  -  total flux cleaned = -0.00156564 Jy
! Component: 650  -  total flux cleaned = -0.00156563 Jy
! Component: 700  -  total flux cleaned = -0.00158097 Jy
! Component: 750  -  total flux cleaned = -0.00153477 Jy
! Component: 800  -  total flux cleaned = -0.00148982 Jy
! Component: 850  -  total flux cleaned = -0.00146056 Jy
! Component: 900  -  total flux cleaned = -0.00147517 Jy
! Component: 950  -  total flux cleaned = -0.00143253 Jy
! Component: 1000  -  total flux cleaned = -0.00144698 Jy
! Component: 1050  -  total flux cleaned = -0.0014884 Jy
! Component: 1100  -  total flux cleaned = -0.00151538 Jy
! Component: 1150  -  total flux cleaned = -0.00156846 Jy
! Component: 1200  -  total flux cleaned = -0.00154184 Jy
! Component: 1250  -  total flux cleaned = -0.00156773 Jy
! Component: 1300  -  total flux cleaned = -0.00161872 Jy
! Component: 1350  -  total flux cleaned = -0.00165608 Jy
! Component: 1400  -  total flux cleaned = -0.00165602 Jy
! Component: 1450  -  total flux cleaned = -0.00168053 Jy
! Component: 1500  -  total flux cleaned = -0.00174118 Jy
! Component: 1550  -  total flux cleaned = -0.00176507 Jy
! Component: 1600  -  total flux cleaned = -0.00178892 Jy
! Component: 1650  -  total flux cleaned = -0.00183592 Jy
! Component: 1700  -  total flux cleaned = -0.00185926 Jy
! Component: 1750  -  total flux cleaned = -0.00193977 Jy
! Component: 1800  -  total flux cleaned = -0.00197384 Jy
! Component: 1850  -  total flux cleaned = -0.00201891 Jy
! Component: 1900  -  total flux cleaned = -0.00205248 Jy
! Component: 1950  -  total flux cleaned = -0.00208559 Jy
! Component: 2000  -  total flux cleaned = -0.00212948 Jy
! Component: 2050  -  total flux cleaned = -0.00215122 Jy
! Component: 2100  -  total flux cleaned = -0.00211898 Jy
! Component: 2150  -  total flux cleaned = -0.00215109 Jy
! Component: 2200  -  total flux cleaned = -0.00212994 Jy
! Component: 2250  -  total flux cleaned = -0.00210897 Jy
! Component: 2300  -  total flux cleaned = -0.0021194 Jy
! Component: 2350  -  total flux cleaned = -0.00204722 Jy
! Component: 2400  -  total flux cleaned = -0.00204727 Jy
! Component: 2450  -  total flux cleaned = -0.00206751 Jy
! Component: 2500  -  total flux cleaned = -0.00202708 Jy
! Component: 2550  -  total flux cleaned = -0.00198709 Jy
! Component: 2600  -  total flux cleaned = -0.00197718 Jy
! Component: 2650  -  total flux cleaned = -0.00199698 Jy
! Component: 2700  -  total flux cleaned = -0.00195765 Jy
! Component: 2750  -  total flux cleaned = -0.00196734 Jy
! Component: 2800  -  total flux cleaned = -0.00191914 Jy
! Component: 2850  -  total flux cleaned = -0.00195757 Jy
! Component: 2900  -  total flux cleaned = -0.00191937 Jy
! Component: 2950  -  total flux cleaned = -0.0019479 Jy
! Component: 3000  -  total flux cleaned = -0.00195734 Jy
! Component: 3050  -  total flux cleaned = -0.00195736 Jy
! Component: 3100  -  total flux cleaned = -0.00194809 Jy
! Component: 3150  -  total flux cleaned = -0.00196652 Jy
! Component: 3200  -  total flux cleaned = -0.00195732 Jy
! Component: 3250  -  total flux cleaned = -0.00195736 Jy
! Component: 3300  -  total flux cleaned = -0.00190294 Jy
! Component: 3350  -  total flux cleaned = -0.00192094 Jy
! Component: 3400  -  total flux cleaned = -0.00188511 Jy
! Component: 3450  -  total flux cleaned = -0.00192963 Jy
! Component: 3500  -  total flux cleaned = -0.00188531 Jy
! Component: 3550  -  total flux cleaned = -0.00190287 Jy
! Component: 3600  -  total flux cleaned = -0.00189411 Jy
! Component: 3650  -  total flux cleaned = -0.00185925 Jy
! Component: 3700  -  total flux cleaned = -0.00187654 Jy
! Component: 3750  -  total flux cleaned = -0.00189379 Jy
! Component: 3800  -  total flux cleaned = -0.00185094 Jy
! Component: 3850  -  total flux cleaned = -0.00185949 Jy
! Component: 3900  -  total flux cleaned = -0.00184264 Jy
! Component: 3950  -  total flux cleaned = -0.00185953 Jy
! Component: 4000  -  total flux cleaned = -0.00185114 Jy
! Component: 4050  -  total flux cleaned = -0.00185947 Jy
! Total flux subtracted in 4096 components = -0.00184292 Jy
! Clean residual min=-0.000583 max=0.000504 Jy/beam
! Clean residual mean=0.000003 rms=0.000162 Jy/beam
! Combined flux in latest and established models = 0.0991688 Jy
keep
! Adding 261 model components to the UV plane model.
! The established model now contains 346 components and 0.0991688 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J1444-0859_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.676 x 15.12 at -16.64 degrees (North through East)
! Clean map  min=-0.0010032  max=0.092904 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J1444-0859_S_a_map.fits
wmodel /vlbi/uf001/uvm//J1444-0859_S_a_map.mod
! Writing 346 model components to file: /vlbi/uf001/uvm//J1444-0859_S_a_map.mod
wobs   /vlbi/uf001/uvm//J1444-0859_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J1444-0859_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J1444-0859_S_a_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uvm//J1444-0859_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0929044 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000161132 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.520315 0.520315 1.04063 2.08126 4.16252 8.32503 16.6501 33.3001 66.6003
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.092 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  576.574 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J1444-0859_S_a_dfm.log closed on Sun Jan 13 21:48:47 2019