! Started logfile: /vlbi/uf001/uva//J1424-1407_S_dfm.log on Mon Jan 14 02:54:15 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1424-1407_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1424-1407_S_uva.fits ! AN table 1: 38 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.790643 visibilities/baseline/integration-bin. ! Found source: J1424-1407 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 4056 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1424-1407_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.011706Jy sigma=18.604281 ! Fit after self-cal, rms=0.866182Jy sigma=15.732395 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.18 mas, bmaj=6.414 mas, bpa=-0.1196 degrees ! Estimated noise=0.855275 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106271 Jy ! Component: 100 - total flux cleaned = 0.134692 Jy ! Total flux subtracted in 100 components = 0.134692 Jy ! Clean residual min=-0.008400 max=0.013066 Jy/beam ! Clean residual mean=-0.000045 rms=0.002549 Jy/beam ! Combined flux in latest and established models = 0.134692 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.134692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088197Jy sigma=1.451692 ! Fit after self-cal, rms=0.088194Jy sigma=1.451224 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.675 mas, bmaj=7.486 mas, bpa=0.3138 degrees ! Estimated noise=0.629086 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013526 Jy ! Component: 100 - total flux cleaned = 0.0197631 Jy ! Component: 150 - total flux cleaned = 0.0229888 Jy ! Component: 200 - total flux cleaned = 0.0247449 Jy ! Total flux subtracted in 200 components = 0.0247449 Jy ! Clean residual min=-0.007416 max=0.009862 Jy/beam ! Clean residual mean=-0.000018 rms=0.002242 Jy/beam ! Combined flux in latest and established models = 0.159436 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 34 components and 0.159436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086911Jy sigma=1.401676 ! Fit after self-cal, rms=0.086925Jy sigma=1.401343 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.675 x 7.486 at 0.3138 degrees (North through East) ! Clean map min=-0.0072149 max=0.13725 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.90 HN 1.00 KP 1.01 ! LA 0.98 MK 1.34 NL 1.00 OV 0.97 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 0.88 HN 1.02 KP 1.01 ! LA 0.96 MK 1.03 NL 0.97 OV 0.94 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 0.89 HN 1.01 KP 1.03 ! LA 0.97 MK 1.01 NL 0.99 OV 1.03 ! PT 1.03 SC 0.99 ! ! ! Fit before self-cal, rms=0.086925Jy sigma=1.401343 ! Fit after self-cal, rms=0.092713Jy sigma=1.377825 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.736 mas, bmaj=7.661 mas, bpa=1.175 degrees ! Estimated noise=0.628568 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-34, 18.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00899006 Jy ! Component: 100 - total flux cleaned = 0.0105566 Jy ! Component: 150 - total flux cleaned = 0.0106919 Jy ! Component: 200 - total flux cleaned = 0.0106973 Jy ! Total flux subtracted in 200 components = 0.0106973 Jy ! Clean residual min=-0.007074 max=0.006281 Jy/beam ! Clean residual mean=0.000005 rms=0.001678 Jy/beam ! Combined flux in latest and established models = 0.170134 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 57 components and 0.170134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091739Jy sigma=1.356052 ! Fit after self-cal, rms=0.091790Jy sigma=1.354312 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091790Jy sigma=1.354312 ! Fit after self-cal, rms=0.101650Jy sigma=1.302050 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.705 mas, bmaj=7.633 mas, bpa=1.34 degrees ! Estimated noise=0.62949 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00335184 Jy ! Component: 100 - total flux cleaned = 0.00451179 Jy ! Component: 150 - total flux cleaned = 0.00486295 Jy ! Component: 200 - total flux cleaned = 0.00504327 Jy ! Total flux subtracted in 200 components = 0.00504327 Jy ! Clean residual min=-0.003362 max=0.003375 Jy/beam ! Clean residual mean=-0.000011 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 0.175177 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 84 components and 0.175177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.101507Jy sigma=1.298901 ! Fit after self-cal, rms=0.101674Jy sigma=1.298050 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000600921 Jy ! Component: 100 - total flux cleaned = 0.000712584 Jy ! Component: 150 - total flux cleaned = 0.000747732 Jy ! Component: 200 - total flux cleaned = 0.00077949 Jy ! Total flux subtracted in 200 components = 0.00077949 Jy ! Clean residual min=-0.003318 max=0.003188 Jy/beam ! Clean residual mean=-0.000012 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.175957 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 95 components and 0.175957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.101635Jy sigma=1.297574 ! Fit after self-cal, rms=0.101632Jy sigma=1.297549 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.101632Jy sigma=1.297549 ! Fit after self-cal, rms=0.102830Jy sigma=1.297206 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.712 mas, bmaj=7.648 mas, bpa=1.5 degrees ! Estimated noise=0.630323 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000444729 Jy ! Component: 100 - total flux cleaned = 0.00037005 Jy ! Component: 150 - total flux cleaned = 0.000369504 Jy ! Component: 200 - total flux cleaned = 0.000338917 Jy ! Total flux subtracted in 200 components = 0.000338917 Jy ! Clean residual min=-0.003228 max=0.003008 Jy/beam ! Clean residual mean=-0.000013 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.176295 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 101 components and 0.176295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102791Jy sigma=1.296807 ! Fit after self-cal, rms=0.102800Jy sigma=1.296774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.80514e-05 Jy ! Component: 100 - total flux cleaned = 1.96806e-05 Jy ! Component: 150 - total flux cleaned = -7.08024e-06 Jy ! Component: 200 - total flux cleaned = -3.31669e-05 Jy ! Total flux subtracted in 200 components = -3.31669e-05 Jy ! Clean residual min=-0.003187 max=0.002974 Jy/beam ! Clean residual mean=-0.000013 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.176262 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 106 components and 0.176262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102775Jy sigma=1.296576 ! Fit after self-cal, rms=0.102773Jy sigma=1.296569 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102773Jy sigma=1.296569 ! Fit after self-cal, rms=0.103168Jy sigma=1.296503 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.542 mas, bmaj=13.98 mas, bpa=3.349 degrees ! Estimated noise=0.766849 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.79459e-05 Jy ! Component: 100 - total flux cleaned = -0.000104503 Jy ! Component: 150 - total flux cleaned = -0.000184927 Jy ! Component: 200 - total flux cleaned = -0.000240803 Jy ! Total flux subtracted in 200 components = -0.000240803 Jy ! Clean residual min=-0.003502 max=0.004022 Jy/beam ! Clean residual mean=-0.000025 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.176021 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 120 components and 0.176021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103156Jy sigma=1.296486 ! Fit after self-cal, rms=0.103155Jy sigma=1.296474 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.48323e-05 Jy ! Component: 100 - total flux cleaned = -4.51123e-05 Jy ! Component: 150 - total flux cleaned = -9.35395e-05 Jy ! Component: 200 - total flux cleaned = -0.000140546 Jy ! Total flux subtracted in 200 components = -0.000140546 Jy ! Clean residual min=-0.003524 max=0.004035 Jy/beam ! Clean residual mean=-0.000025 rms=0.000996 Jy/beam ! Combined flux in latest and established models = 0.175881 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 128 components and 0.175881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103152Jy sigma=1.296447 ! Fit after self-cal, rms=0.103150Jy sigma=1.296440 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.718 mas, bmaj=7.663 mas, bpa=1.628 degrees ! Estimated noise=0.630857 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.718 x 7.663 at 1.628 degrees (North through East) ! Clean map min=-0.0030179 max=0.13728 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.209 mas, bmaj=6.559 mas, bpa=1.664 degrees ! Estimated noise=0.868004 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107527 Jy ! Component: 100 - total flux cleaned = 0.134756 Jy ! Component: 150 - total flux cleaned = 0.147472 Jy ! Component: 200 - total flux cleaned = 0.155422 Jy ! Total flux subtracted in 200 components = 0.155422 Jy ! Clean residual min=-0.005298 max=0.004840 Jy/beam ! Clean residual mean=-0.000025 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 0.155422 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.155422 Jy ! Inverting map and beam ! Estimated beam: bmin=3.718 mas, bmaj=7.663 mas, bpa=1.628 degrees ! Estimated noise=0.630857 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00654961 Jy ! Component: 100 - total flux cleaned = 0.0108652 Jy ! Component: 150 - total flux cleaned = 0.0139393 Jy ! Component: 200 - total flux cleaned = 0.016155 Jy ! Total flux subtracted in 200 components = 0.016155 Jy ! Clean residual min=-0.003657 max=0.003419 Jy/beam ! Clean residual mean=-0.000016 rms=0.000858 Jy/beam ! Combined flux in latest and established models = 0.171577 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 55 components and 0.171577 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.542 mas, bmaj=13.98 mas, bpa=3.349 degrees ! Estimated noise=0.766849 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221323 Jy ! Component: 100 - total flux cleaned = 0.00305119 Jy ! Component: 150 - total flux cleaned = 0.00338526 Jy ! Component: 200 - total flux cleaned = 0.00358963 Jy ! Total flux subtracted in 200 components = 0.00358963 Jy ! Clean residual min=-0.003647 max=0.004185 Jy/beam ! Clean residual mean=-0.000025 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.175166 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142824 Jy ! Component: 100 - total flux cleaned = 0.000240981 Jy ! Component: 150 - total flux cleaned = 0.000347601 Jy ! Component: 200 - total flux cleaned = 0.000384631 Jy ! Total flux subtracted in 200 components = 0.000384631 Jy ! Clean residual min=-0.003601 max=0.004157 Jy/beam ! Clean residual mean=-0.000025 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.175551 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 101 components and 0.175551 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.718 mas, bmaj=7.663 mas, bpa=1.628 degrees ! Estimated noise=0.630857 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.18768e-05 Jy ! Component: 100 - total flux cleaned = -0.000177245 Jy ! Component: 150 - total flux cleaned = -0.000239448 Jy ! Component: 200 - total flux cleaned = -0.000297151 Jy ! Total flux subtracted in 200 components = -0.000297151 Jy ! Clean residual min=-0.003095 max=0.003185 Jy/beam ! Clean residual mean=-0.000015 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.175254 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 112 components and 0.175254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103116Jy sigma=1.296730 ! Fit after self-cal, rms=0.103078Jy sigma=1.296616 wmodel J1424-1407_S_map.mod ! Writing 112 model components to file: J1424-1407_S_map.mod wobs J1424-1407_S_uvs.fits ! Writing UV FITS file: J1424-1407_S_uvs.fits wwins J1424-1407_S_map.win ! wwins: Wrote 2 windows to J1424-1407_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000117278 Jy ! Component: 100 - total flux cleaned = -6.42341e-05 Jy ! Component: 150 - total flux cleaned = 3.87474e-05 Jy ! Component: 200 - total flux cleaned = 4.00458e-05 Jy ! Component: 250 - total flux cleaned = 0.000134372 Jy ! Component: 300 - total flux cleaned = 0.000178668 Jy ! Component: 350 - total flux cleaned = 0.00031095 Jy ! Component: 400 - total flux cleaned = 0.000396631 Jy ! Component: 450 - total flux cleaned = 0.000436865 Jy ! Component: 500 - total flux cleaned = 0.000476069 Jy ! Component: 550 - total flux cleaned = 0.000515116 Jy ! Component: 600 - total flux cleaned = 0.000591136 Jy ! Component: 650 - total flux cleaned = 0.000628482 Jy ! Component: 700 - total flux cleaned = 0.000811464 Jy ! Component: 750 - total flux cleaned = 0.00113328 Jy ! Component: 800 - total flux cleaned = 0.00123782 Jy ! Component: 850 - total flux cleaned = 0.00137513 Jy ! Component: 900 - total flux cleaned = 0.00151053 Jy ! Component: 950 - total flux cleaned = 0.00160974 Jy ! Component: 1000 - total flux cleaned = 0.00167506 Jy ! Component: 1050 - total flux cleaned = 0.00177159 Jy ! Component: 1100 - total flux cleaned = 0.0018977 Jy ! Component: 1150 - total flux cleaned = 0.00199058 Jy ! Component: 1200 - total flux cleaned = 0.00205143 Jy ! Component: 1250 - total flux cleaned = 0.00205157 Jy ! Component: 1300 - total flux cleaned = 0.00214024 Jy ! Component: 1350 - total flux cleaned = 0.00216924 Jy ! Component: 1400 - total flux cleaned = 0.00219774 Jy ! Component: 1450 - total flux cleaned = 0.00216954 Jy ! Component: 1500 - total flux cleaned = 0.00217001 Jy ! Component: 1550 - total flux cleaned = 0.00227971 Jy ! Component: 1600 - total flux cleaned = 0.00227996 Jy ! Component: 1650 - total flux cleaned = 0.00233378 Jy ! Component: 1700 - total flux cleaned = 0.00236009 Jy ! Component: 1750 - total flux cleaned = 0.00243876 Jy ! Component: 1800 - total flux cleaned = 0.00259252 Jy ! Component: 1850 - total flux cleaned = 0.00264274 Jy ! Component: 1900 - total flux cleaned = 0.00271696 Jy ! Component: 1950 - total flux cleaned = 0.00271698 Jy ! Component: 2000 - total flux cleaned = 0.00274156 Jy ! Component: 2050 - total flux cleaned = 0.002862 Jy ! Component: 2100 - total flux cleaned = 0.00293293 Jy ! Component: 2150 - total flux cleaned = 0.00295592 Jy ! Component: 2200 - total flux cleaned = 0.00295589 Jy ! Component: 2250 - total flux cleaned = 0.00304748 Jy ! Component: 2300 - total flux cleaned = 0.00304758 Jy ! Component: 2350 - total flux cleaned = 0.00311511 Jy ! Component: 2400 - total flux cleaned = 0.00313734 Jy ! Component: 2450 - total flux cleaned = 0.00318148 Jy ! Component: 2500 - total flux cleaned = 0.00326873 Jy ! Component: 2550 - total flux cleaned = 0.00320374 Jy ! Component: 2600 - total flux cleaned = 0.00328964 Jy ! Component: 2650 - total flux cleaned = 0.00326839 Jy ! Component: 2700 - total flux cleaned = 0.00331057 Jy ! Component: 2750 - total flux cleaned = 0.00331054 Jy ! Component: 2800 - total flux cleaned = 0.00333112 Jy ! Component: 2850 - total flux cleaned = 0.00328997 Jy ! Component: 2900 - total flux cleaned = 0.00333044 Jy ! Component: 2950 - total flux cleaned = 0.00341115 Jy ! Component: 3000 - total flux cleaned = 0.00341085 Jy ! Component: 3050 - total flux cleaned = 0.00339093 Jy ! Component: 3100 - total flux cleaned = 0.00337129 Jy ! Component: 3150 - total flux cleaned = 0.00335199 Jy ! Component: 3200 - total flux cleaned = 0.00329394 Jy ! Component: 3250 - total flux cleaned = 0.00321724 Jy ! Component: 3300 - total flux cleaned = 0.00319821 Jy ! Component: 3350 - total flux cleaned = 0.00316034 Jy ! Component: 3400 - total flux cleaned = 0.00308534 Jy ! Component: 3450 - total flux cleaned = 0.00312269 Jy ! Component: 3500 - total flux cleaned = 0.00304892 Jy ! Component: 3550 - total flux cleaned = 0.0031221 Jy ! Component: 3600 - total flux cleaned = 0.00303089 Jy ! Component: 3650 - total flux cleaned = 0.00301276 Jy ! Component: 3700 - total flux cleaned = 0.00301285 Jy ! Component: 3750 - total flux cleaned = 0.00306638 Jy ! Component: 3800 - total flux cleaned = 0.00304861 Jy ! Component: 3850 - total flux cleaned = 0.00306632 Jy ! Component: 3900 - total flux cleaned = 0.00301395 Jy ! Component: 3950 - total flux cleaned = 0.00311787 Jy ! Component: 4000 - total flux cleaned = 0.00306618 Jy ! Component: 4050 - total flux cleaned = 0.0030832 Jy ! Total flux subtracted in 4096 components = 0.00311715 Jy ! Clean residual min=-0.001024 max=0.001142 Jy/beam ! Clean residual mean=-0.000004 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.178371 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 365 components and 0.178371 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1424-1407_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.718 x 7.663 at 1.628 degrees (North through East) ! Clean map min=-0.002059 max=0.13861 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1424-1407_S_map.fits wmodel /vlbi/uf001/uva//J1424-1407_S_map.mod ! Writing 365 model components to file: /vlbi/uf001/uva//J1424-1407_S_map.mod wobs /vlbi/uf001/uva//J1424-1407_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1424-1407_S_uvs.fits wwins /vlbi/uf001/uva//J1424-1407_S_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uva//J1424-1407_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.138608 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000302004 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.65365 0.65365 1.3073 2.6146 5.2292 10.4584 20.9168 41.8336 83.6672 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.138 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 458.961 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1424-1407_S_dfm.log closed on Mon Jan 14 02:54:19 2019