! Started logfile: /vlbi/uf001/uva//J1424+4705_S_dfm.log on Mon Jan 14 02:54:05 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1424+4705_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1424+4705_S_uva.fits ! AN table 1: 57 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.992481 visibilities/baseline/integration-bin. ! Found source: J1424+4705 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 4752 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1424+4705_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.008272Jy sigma=20.694237 ! Fit after self-cal, rms=0.862355Jy sigma=17.560432 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.899 mas, bmaj=4.087 mas, bpa=-0.659 degrees ! Estimated noise=0.810629 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113021 Jy ! Component: 100 - total flux cleaned = 0.1393 Jy ! Total flux subtracted in 100 components = 0.1393 Jy ! Clean residual min=-0.007608 max=0.010416 Jy/beam ! Clean residual mean=-0.000012 rms=0.001987 Jy/beam ! Combined flux in latest and established models = 0.1393 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.1393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077077Jy sigma=1.400939 ! Fit after self-cal, rms=0.077009Jy sigma=1.399990 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.345 mas, bmaj=4.622 mas, bpa=-2.011 degrees ! Estimated noise=0.518918 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, 36). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117736 Jy ! Component: 100 - total flux cleaned = 0.0184954 Jy ! Component: 150 - total flux cleaned = 0.0230815 Jy ! Component: 200 - total flux cleaned = 0.0258178 Jy ! Total flux subtracted in 200 components = 0.0258178 Jy ! Clean residual min=-0.006810 max=0.009333 Jy/beam ! Clean residual mean=0.000005 rms=0.001662 Jy/beam ! Combined flux in latest and established models = 0.165118 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 33 components and 0.165118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075479Jy sigma=1.347616 ! Fit after self-cal, rms=0.075329Jy sigma=1.342231 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.345 x 4.622 at -2.011 degrees (North through East) ! Clean map min=-0.0057477 max=0.14221 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 HN 0.95 LA 0.88 MK 1.05 ! NL 1.06 OV 1.26 PT 0.96 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 0.95 LA 0.92 MK 1.04 ! NL 1.02 OV 1.26 PT 0.96 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 0.96 LA 0.93 MK 1.02 ! NL 0.98 OV 1.30 PT 0.97 SC 1.03 ! ! ! Fit before self-cal, rms=0.075329Jy sigma=1.342231 ! Fit after self-cal, rms=0.075813Jy sigma=1.277718 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.391 mas, bmaj=4.667 mas, bpa=-2.439 degrees ! Estimated noise=0.51207 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113034 Jy ! Component: 100 - total flux cleaned = 0.000327574 Jy ! Component: 150 - total flux cleaned = 0.000505432 Jy ! Component: 200 - total flux cleaned = 0.000672059 Jy ! Total flux subtracted in 200 components = 0.000672059 Jy ! Clean residual min=-0.003476 max=0.003840 Jy/beam ! Clean residual mean=0.000018 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.16579 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 49 components and 0.16579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075633Jy sigma=1.275816 ! Fit after self-cal, rms=0.075860Jy sigma=1.274708 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075860Jy sigma=1.274708 ! Fit after self-cal, rms=0.085561Jy sigma=1.255656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.38 mas, bmaj=4.659 mas, bpa=-2.489 degrees ! Estimated noise=0.516565 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000910825 Jy ! Component: 100 - total flux cleaned = -0.00170842 Jy ! Component: 150 - total flux cleaned = -0.00219026 Jy ! Component: 200 - total flux cleaned = -0.0025069 Jy ! Total flux subtracted in 200 components = -0.0025069 Jy ! Clean residual min=-0.002746 max=0.003404 Jy/beam ! Clean residual mean=0.000017 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.163283 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 70 components and 0.163283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085455Jy sigma=1.253980 ! Fit after self-cal, rms=0.085575Jy sigma=1.253531 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (57, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275896 Jy ! Component: 100 - total flux cleaned = 0.00307081 Jy ! Component: 150 - total flux cleaned = 0.0028082 Jy ! Component: 200 - total flux cleaned = 0.00273182 Jy ! Total flux subtracted in 200 components = 0.00273182 Jy ! Clean residual min=-0.002609 max=0.002406 Jy/beam ! Clean residual mean=0.000010 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.166015 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 88 components and 0.166015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085449Jy sigma=1.251238 ! Fit after self-cal, rms=0.085448Jy sigma=1.251136 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085448Jy sigma=1.251136 ! Fit after self-cal, rms=0.086176Jy sigma=1.250807 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.381 mas, bmaj=4.658 mas, bpa=-2.466 degrees ! Estimated noise=0.516375 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.1162e-05 Jy ! Component: 100 - total flux cleaned = -0.000465916 Jy ! Component: 150 - total flux cleaned = -0.000533141 Jy ! Component: 200 - total flux cleaned = -0.000595204 Jy ! Total flux subtracted in 200 components = -0.000595204 Jy ! Clean residual min=-0.002576 max=0.002396 Jy/beam ! Clean residual mean=0.000013 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.165419 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 109 components and 0.165419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086130Jy sigma=1.250233 ! Fit after self-cal, rms=0.086132Jy sigma=1.250176 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000450912 Jy ! Component: 100 - total flux cleaned = -0.000540699 Jy ! Component: 150 - total flux cleaned = -0.000596605 Jy ! Component: 200 - total flux cleaned = -0.000649105 Jy ! Total flux subtracted in 200 components = -0.000649105 Jy ! Clean residual min=-0.002555 max=0.002384 Jy/beam ! Clean residual mean=0.000012 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.16477 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 118 components and 0.16477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086106Jy sigma=1.249823 ! Fit after self-cal, rms=0.086103Jy sigma=1.249796 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086103Jy sigma=1.249796 ! Fit after self-cal, rms=0.086462Jy sigma=1.249714 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.821 mas, bmaj=8.064 mas, bpa=11.88 degrees ! Estimated noise=0.691719 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00049026 Jy ! Component: 100 - total flux cleaned = 0.000168709 Jy ! Component: 150 - total flux cleaned = -0.00019899 Jy ! Component: 200 - total flux cleaned = -0.000355768 Jy ! Total flux subtracted in 200 components = -0.000355768 Jy ! Clean residual min=-0.002864 max=0.002910 Jy/beam ! Clean residual mean=0.000030 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.164415 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 140 components and 0.164415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086440Jy sigma=1.249822 ! Fit after self-cal, rms=0.086438Jy sigma=1.249659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000395998 Jy ! Component: 100 - total flux cleaned = -0.00069294 Jy ! Component: 150 - total flux cleaned = -0.00079495 Jy ! Component: 200 - total flux cleaned = -0.00086188 Jy ! Total flux subtracted in 200 components = -0.00086188 Jy ! Clean residual min=-0.002746 max=0.002840 Jy/beam ! Clean residual mean=0.000024 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.163553 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 145 components and 0.163553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086431Jy sigma=1.249856 ! Fit after self-cal, rms=0.086427Jy sigma=1.249802 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.381 mas, bmaj=4.657 mas, bpa=-2.502 degrees ! Estimated noise=0.51626 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.381 x 4.657 at -2.502 degrees (North through East) ! Clean map min=-0.0024338 max=0.14114 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.933 mas, bmaj=4.116 mas, bpa=-1.09 degrees ! Estimated noise=0.801978 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111611 Jy ! Component: 100 - total flux cleaned = 0.137694 Jy ! Component: 150 - total flux cleaned = 0.147915 Jy ! Component: 200 - total flux cleaned = 0.153078 Jy ! Total flux subtracted in 200 components = 0.153078 Jy ! Clean residual min=-0.004022 max=0.004395 Jy/beam ! Clean residual mean=0.000002 rms=0.001033 Jy/beam ! Combined flux in latest and established models = 0.153078 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.153078 Jy ! Inverting map and beam ! Estimated beam: bmin=3.381 mas, bmaj=4.657 mas, bpa=-2.502 degrees ! Estimated noise=0.51626 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00364204 Jy ! Component: 100 - total flux cleaned = 0.00493247 Jy ! Component: 150 - total flux cleaned = 0.00598242 Jy ! Component: 200 - total flux cleaned = 0.00640886 Jy ! Total flux subtracted in 200 components = 0.00640886 Jy ! Clean residual min=-0.002561 max=0.002565 Jy/beam ! Clean residual mean=0.000007 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.159487 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 37 components and 0.159487 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.821 mas, bmaj=8.064 mas, bpa=11.88 degrees ! Estimated noise=0.691719 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204761 Jy ! Component: 100 - total flux cleaned = 0.00179476 Jy ! Component: 150 - total flux cleaned = 0.00174343 Jy ! Component: 200 - total flux cleaned = 0.00182886 Jy ! Total flux subtracted in 200 components = 0.00182886 Jy ! Clean residual min=-0.002819 max=0.002816 Jy/beam ! Clean residual mean=0.000018 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.161316 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119403 Jy ! Component: 100 - total flux cleaned = 0.000297427 Jy ! Component: 150 - total flux cleaned = 0.000426603 Jy ! Component: 200 - total flux cleaned = 0.000544498 Jy ! Total flux subtracted in 200 components = 0.000544498 Jy ! Clean residual min=-0.002805 max=0.002736 Jy/beam ! Clean residual mean=0.000018 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.16186 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 55 components and 0.16186 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.381 mas, bmaj=4.657 mas, bpa=-2.502 degrees ! Estimated noise=0.51626 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000203935 Jy ! Component: 100 - total flux cleaned = 1.10171e-06 Jy ! Component: 150 - total flux cleaned = 4.61624e-05 Jy ! Component: 200 - total flux cleaned = 8.898e-05 Jy ! Total flux subtracted in 200 components = 8.898e-05 Jy ! Clean residual min=-0.002432 max=0.002324 Jy/beam ! Clean residual mean=0.000006 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.161949 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 77 components and 0.161949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086521Jy sigma=1.251358 ! Fit after self-cal, rms=0.086492Jy sigma=1.250973 wmodel J1424+4705_S_map.mod ! Writing 77 model components to file: J1424+4705_S_map.mod wobs J1424+4705_S_uvs.fits ! Writing UV FITS file: J1424+4705_S_uvs.fits wwins J1424+4705_S_map.win ! wwins: Wrote 3 windows to J1424+4705_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000212121 Jy ! Component: 100 - total flux cleaned = 0.000293369 Jy ! Component: 150 - total flux cleaned = 0.000370662 Jy ! Component: 200 - total flux cleaned = 0.000408544 Jy ! Component: 250 - total flux cleaned = 0.000480685 Jy ! Component: 300 - total flux cleaned = 0.000548663 Jy ! Component: 350 - total flux cleaned = 0.000480914 Jy ! Component: 400 - total flux cleaned = 0.000480617 Jy ! Component: 450 - total flux cleaned = 0.000385941 Jy ! Component: 500 - total flux cleaned = 0.000447889 Jy ! Component: 550 - total flux cleaned = 0.000568679 Jy ! Component: 600 - total flux cleaned = 0.000656436 Jy ! Component: 650 - total flux cleaned = 0.000771364 Jy ! Component: 700 - total flux cleaned = 0.000827738 Jy ! Component: 750 - total flux cleaned = 0.000910816 Jy ! Component: 800 - total flux cleaned = 0.00101897 Jy ! Component: 850 - total flux cleaned = 0.00107219 Jy ! Component: 900 - total flux cleaned = 0.00104661 Jy ! Component: 950 - total flux cleaned = 0.00122829 Jy ! Component: 1000 - total flux cleaned = 0.00140545 Jy ! Component: 1050 - total flux cleaned = 0.0014799 Jy ! Component: 1100 - total flux cleaned = 0.00160318 Jy ! Component: 1150 - total flux cleaned = 0.0017726 Jy ! Component: 1200 - total flux cleaned = 0.0018679 Jy ! Component: 1250 - total flux cleaned = 0.00200899 Jy ! Component: 1300 - total flux cleaned = 0.00214818 Jy ! Component: 1350 - total flux cleaned = 0.00223992 Jy ! Component: 1400 - total flux cleaned = 0.00244375 Jy ! Component: 1450 - total flux cleaned = 0.00264402 Jy ! Component: 1500 - total flux cleaned = 0.00268814 Jy ! Component: 1550 - total flux cleaned = 0.00283961 Jy ! Component: 1600 - total flux cleaned = 0.00290326 Jy ! Component: 1650 - total flux cleaned = 0.0030091 Jy ! Component: 1700 - total flux cleaned = 0.00311387 Jy ! Component: 1750 - total flux cleaned = 0.00321754 Jy ! Component: 1800 - total flux cleaned = 0.00329914 Jy ! Component: 1850 - total flux cleaned = 0.00342038 Jy ! Component: 1900 - total flux cleaned = 0.0034801 Jy ! Component: 1950 - total flux cleaned = 0.00351965 Jy ! Component: 2000 - total flux cleaned = 0.00355862 Jy ! Component: 2050 - total flux cleaned = 0.00355901 Jy ! Component: 2100 - total flux cleaned = 0.00357836 Jy ! Component: 2150 - total flux cleaned = 0.00361645 Jy ! Component: 2200 - total flux cleaned = 0.00363514 Jy ! Component: 2250 - total flux cleaned = 0.00369119 Jy ! Component: 2300 - total flux cleaned = 0.00372802 Jy ! Component: 2350 - total flux cleaned = 0.00372802 Jy ! Component: 2400 - total flux cleaned = 0.00378274 Jy ! Component: 2450 - total flux cleaned = 0.00385487 Jy ! Component: 2500 - total flux cleaned = 0.00385477 Jy ! Component: 2550 - total flux cleaned = 0.00392556 Jy ! Component: 2600 - total flux cleaned = 0.00390813 Jy ! Component: 2650 - total flux cleaned = 0.0039952 Jy ! Component: 2700 - total flux cleaned = 0.00401251 Jy ! Component: 2750 - total flux cleaned = 0.00411517 Jy ! Component: 2800 - total flux cleaned = 0.00413201 Jy ! Component: 2850 - total flux cleaned = 0.00411502 Jy ! Component: 2900 - total flux cleaned = 0.00421521 Jy ! Component: 2950 - total flux cleaned = 0.00423168 Jy ! Component: 3000 - total flux cleaned = 0.00424825 Jy ! Component: 3050 - total flux cleaned = 0.00426447 Jy ! Component: 3100 - total flux cleaned = 0.0042969 Jy ! Component: 3150 - total flux cleaned = 0.00431282 Jy ! Component: 3200 - total flux cleaned = 0.00428095 Jy ! Component: 3250 - total flux cleaned = 0.0043285 Jy ! Component: 3300 - total flux cleaned = 0.00432839 Jy ! Component: 3350 - total flux cleaned = 0.00437543 Jy ! Component: 3400 - total flux cleaned = 0.00439104 Jy ! Component: 3450 - total flux cleaned = 0.0044373 Jy ! Component: 3500 - total flux cleaned = 0.00446778 Jy ! Component: 3550 - total flux cleaned = 0.00443734 Jy ! Component: 3600 - total flux cleaned = 0.00451288 Jy ! Component: 3650 - total flux cleaned = 0.0045429 Jy ! Component: 3700 - total flux cleaned = 0.00457286 Jy ! Component: 3750 - total flux cleaned = 0.00461725 Jy ! Component: 3800 - total flux cleaned = 0.00461721 Jy ! Component: 3850 - total flux cleaned = 0.00463175 Jy ! Component: 3900 - total flux cleaned = 0.00467526 Jy ! Component: 3950 - total flux cleaned = 0.00468964 Jy ! Component: 4000 - total flux cleaned = 0.00470394 Jy ! Component: 4050 - total flux cleaned = 0.00470382 Jy ! Total flux subtracted in 4096 components = 0.00471788 Jy ! Clean residual min=-0.000981 max=0.000931 Jy/beam ! Clean residual mean=0.000003 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.166667 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 350 components and 0.166667 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1424+4705_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.381 x 4.657 at -2.502 degrees (North through East) ! Clean map min=-0.0022562 max=0.14212 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1424+4705_S_map.fits wmodel /vlbi/uf001/uva//J1424+4705_S_map.mod ! Writing 350 model components to file: /vlbi/uf001/uva//J1424+4705_S_map.mod wobs /vlbi/uf001/uva//J1424+4705_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1424+4705_S_uvs.fits wwins /vlbi/uf001/uva//J1424+4705_S_map.win ! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1424+4705_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.142115 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000246846 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.521083 0.521083 1.04217 2.08433 4.16867 8.33733 16.6747 33.3493 66.6986 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.142 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 575.723 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1424+4705_S_dfm.log closed on Mon Jan 14 02:54:09 2019