! Started logfile: /vlbi/uf001/uvm//J1419+3821_X_a_dfm.log on Sun Jan 13 21:45:11 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1419+3821_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1419+3821_X_a_uvm.fits ! AN table 1: 4 integrations on 10 of 10 possible baselines. ! AN table 2: 8 integrations on 21 of 21 possible baselines. ! AN table 3: 37 integrations on 45 of 45 possible baselines. ! AN table 4: 15 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.751761 visibilities/baseline/integration-bin. ! Found source: J1419+3821 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 21768 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1419+3821_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 101 telescope corrections were flagged in sub-array 3. ! A total of 43 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 101 telescope corrections were flagged in sub-array 3. ! A total of 43 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 101 telescope corrections were flagged in sub-array 3. ! A total of 43 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 101 telescope corrections were flagged in sub-array 3. ! A total of 43 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 101 telescope corrections were flagged in sub-array 3. ! A total of 43 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 101 telescope corrections were flagged in sub-array 3. ! A total of 43 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 101 telescope corrections were flagged in sub-array 3. ! A total of 43 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 101 telescope corrections were flagged in sub-array 3. ! A total of 43 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 101 telescope corrections were flagged in sub-array 3. ! A total of 43 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 101 telescope corrections were flagged in sub-array 3. ! A total of 43 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 101 telescope corrections were flagged in sub-array 3. ! A total of 43 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 101 telescope corrections were flagged in sub-array 3. ! A total of 43 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.065997Jy sigma=22.128620 ! Fit after self-cal, rms=0.642430Jy sigma=13.509240 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.707 mas, bmaj=1.264 mas, bpa=-3.841 degrees ! Estimated noise=0.381365 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.278058 Jy ! Component: 100 - total flux cleaned = 0.338693 Jy ! Total flux subtracted in 100 components = 0.338693 Jy ! Clean residual min=-0.007893 max=0.016919 Jy/beam ! Clean residual mean=0.000005 rms=0.001456 Jy/beam ! Combined flux in latest and established models = 0.338693 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.338693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.144888Jy sigma=1.724546 ! Fit after self-cal, rms=0.144886Jy sigma=1.724501 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159428 Jy ! Component: 100 - total flux cleaned = 0.023348 Jy ! Total flux subtracted in 100 components = 0.023348 Jy ! Clean residual min=-0.007878 max=0.009867 Jy/beam ! Clean residual mean=0.000005 rms=0.001361 Jy/beam ! Combined flux in latest and established models = 0.362041 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.362041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.141082Jy sigma=1.659120 ! Fit after self-cal, rms=0.141082Jy sigma=1.659084 ! Inverting map ! Added new window around map position (-1.6, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106732 Jy ! Component: 100 - total flux cleaned = 0.015538 Jy ! Total flux subtracted in 100 components = 0.015538 Jy ! Clean residual min=-0.007661 max=0.009624 Jy/beam ! Clean residual mean=0.000005 rms=0.001301 Jy/beam ! Combined flux in latest and established models = 0.377579 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 22 components and 0.377579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.139443Jy sigma=1.621850 ! Fit after self-cal, rms=0.139364Jy sigma=1.618985 ! Inverting map ! Added new window around map position (-0.2, -2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00815311 Jy ! Component: 100 - total flux cleaned = 0.0130096 Jy ! Total flux subtracted in 100 components = 0.0130096 Jy ! Clean residual min=-0.007612 max=0.008656 Jy/beam ! Clean residual mean=0.000005 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.390589 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 32 components and 0.390589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.138250Jy sigma=1.595499 ! Fit after self-cal, rms=0.138221Jy sigma=1.594574 ! Inverting map ! Added new window around map position (1.6, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00839076 Jy ! Component: 100 - total flux cleaned = 0.0140379 Jy ! Total flux subtracted in 100 components = 0.0140379 Jy ! Clean residual min=-0.007159 max=0.007170 Jy/beam ! Clean residual mean=0.000005 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 0.404627 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 42 components and 0.404627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.137028Jy sigma=1.571665 ! Fit after self-cal, rms=0.136997Jy sigma=1.570533 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8929 mas, bmaj=1.607 mas, bpa=-1.105 degrees ! Estimated noise=0.256848 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00755769 Jy ! Component: 100 - total flux cleaned = 0.0131942 Jy ! Component: 150 - total flux cleaned = 0.0176408 Jy ! Component: 200 - total flux cleaned = 0.0211886 Jy ! Total flux subtracted in 200 components = 0.0211886 Jy ! Clean residual min=-0.006519 max=0.006676 Jy/beam ! Clean residual mean=0.000008 rms=0.001486 Jy/beam ! Combined flux in latest and established models = 0.425815 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 52 components and 0.425815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.135685Jy sigma=1.554921 ! Fit after self-cal, rms=0.135678Jy sigma=1.554653 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8929 x 1.607 at -1.105 degrees (North through East) ! Clean map min=-0.006023 max=0.35645 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 LA 1.15 MK 1.18 OV 1.10 ! PT 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 HN 1.07 LA 1.09 MK 1.09 ! NL 1.20 PT 1.09 SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 1.00 HN 0.95 KP 1.01 ! LA 0.99 MK 1.04 NL 1.07 OV 0.92 ! PT 0.94 SC 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 HN 0.96 KP 1.01 LA 0.97 ! MK 1.03 NL 1.03 OV 0.90 PT 1.14 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 LA 1.11 MK 1.18 OV 1.04 ! PT 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 HN 1.10 LA 1.13 MK 1.11 ! NL 1.14 PT 1.10 SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.01 HN 0.96 KP 1.01 ! LA 0.98 MK 1.03 NL 1.06 OV 0.92 ! PT 0.95 SC 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 HN 0.95 KP 0.99 LA 0.98 ! MK 1.06 NL 1.04 OV 0.91 PT 1.15 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 LA 1.07 MK 1.15 OV 1.05 ! PT 1.11 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 HN 1.04 LA 1.10 MK 1.11 ! NL 1.19 PT 1.16 SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.01 HN 0.97 KP 1.00 ! LA 0.99 MK 1.04 NL 1.06 OV 0.93 ! PT 0.94 SC 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 HN 0.94 KP 1.00 LA 0.98 ! MK 1.01 NL 1.04 OV 0.93 PT 1.13 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 LA 1.14 MK 1.21 OV 1.11 ! PT 1.09 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 HN 1.03 LA 1.04 MK 1.12 ! NL 1.16 PT 1.12 SC 1.13 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.00 HN 0.94 KP 1.00 ! LA 1.00 MK 1.03 NL 1.06 OV 0.94 ! PT 0.94 SC 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.06 HN 0.94 KP 0.99 LA 0.98 ! MK 1.03 NL 1.05 OV 0.90 PT 1.14 ! SC 0.97 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 LA 1.16 MK 1.01 OV 1.21 ! PT 1.16 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 HN 1.07 LA 1.08 MK 1.09 ! NL 1.19 PT 1.11 SC 1.14 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.01 HN 0.95 KP 1.01 ! LA 0.98 MK 1.02 NL 1.08 OV 0.92 ! PT 0.94 SC 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 HN 0.98 KP 1.01 LA 0.97 ! MK 1.05 NL 1.06 OV 0.89 PT 1.17 ! SC 0.96 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 LA 0.92 MK 1.03 OV 1.22 ! PT 1.17 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 HN 1.05 LA 1.05 MK 1.08 ! NL 1.15 PT 1.10 SC 1.08 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 1.00 HN 0.95 KP 1.02 ! LA 0.99 MK 1.02 NL 1.08 OV 0.94 ! PT 0.94 SC 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 HN 0.98 KP 1.04 LA 0.97 ! MK 1.06 NL 1.09 OV 0.89 PT 1.15 ! SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 LA 1.19 MK 1.06 OV 1.19 ! PT 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 HN 1.06 LA 1.08 MK 1.13 ! NL 1.16 PT 1.10 SC 1.11 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.00 HN 0.96 KP 1.03 ! LA 0.98 MK 1.03 NL 1.08 OV 0.93 ! PT 0.94 SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 HN 0.99 KP 1.01 LA 0.98 ! MK 1.07 NL 1.03 OV 0.93 PT 1.14 ! SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 LA 1.09 MK 1.10 OV 1.15 ! PT 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.15 HN 1.12 LA 1.04 MK 1.07 ! NL 1.15 PT 1.14 SC 1.09 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.00 HN 0.95 KP 1.00 ! LA 0.98 MK 1.04 NL 1.08 OV 0.92 ! PT 0.95 SC 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 HN 0.95 KP 1.03 LA 1.00 ! MK 1.05 NL 1.06 OV 0.91 PT 1.15 ! SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 LA 1.15 MK 1.20 OV 1.20 ! PT 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 HN 1.07 LA 1.02 MK 1.12 ! NL 1.15 PT 1.12 SC 1.08 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 1.01 HN 0.99 KP 1.01 ! LA 0.98 MK 1.03 NL 1.08 OV 0.93 ! PT 0.95 SC 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.06 HN 0.96 KP 1.02 LA 0.98 ! MK 1.07 NL 1.05 OV 0.93 PT 1.14 ! SC 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 LA 1.09 MK 1.21 OV 1.21 ! PT 1.09 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 HN 1.12 LA 1.02 MK 1.10 ! NL 1.17 PT 1.08 SC 1.12 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 1.00 HN 0.97 KP 1.02 ! LA 0.97 MK 1.03 NL 1.07 OV 0.94 ! PT 0.94 SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.08 HN 0.97 KP 1.01 LA 0.99 ! MK 1.05 NL 1.05 OV 0.88 PT 1.15 ! SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 LA 1.11 MK 1.18 OV 1.22 ! PT 1.12 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.11 HN 1.10 LA 1.04 MK 1.10 ! NL 1.18 PT 1.14 SC 1.13 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.00 HN 0.98 KP 1.00 ! LA 0.97 MK 1.05 NL 1.08 OV 0.93 ! PT 0.96 SC 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 HN 1.00 KP 1.05 LA 1.00 ! MK 1.07 NL 1.03 OV 0.92 PT 1.13 ! SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 LA 1.22 MK 1.09 OV 1.08 ! PT 1.10 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 HN 1.06 LA 1.02 MK 1.08 ! NL 1.20 PT 1.12 SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 0.98 HN 0.98 KP 1.01 ! LA 0.99 MK 1.03 NL 1.08 OV 0.93 ! PT 0.95 SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 HN 0.96 KP 1.03 LA 1.01 ! MK 1.05 NL 1.05 OV 0.93 PT 1.16 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.135678Jy sigma=1.554653 ! Fit after self-cal, rms=0.132276Jy sigma=1.402063 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8947 mas, bmaj=1.613 mas, bpa=-0.4893 degrees ! Estimated noise=0.261232 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000605003 Jy ! Component: 100 - total flux cleaned = -0.000396966 Jy ! Component: 150 - total flux cleaned = -0.00142747 Jy ! Component: 200 - total flux cleaned = -0.00218401 Jy ! Total flux subtracted in 200 components = -0.00218401 Jy ! Clean residual min=-0.004620 max=0.004937 Jy/beam ! Clean residual mean=0.000010 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 0.423631 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 70 components and 0.423631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.131783Jy sigma=1.393517 ! Fit after self-cal, rms=0.131790Jy sigma=1.393234 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.131790Jy sigma=1.393234 ! Fit after self-cal, rms=0.059306Jy sigma=1.111132 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8939 mas, bmaj=1.61 mas, bpa=-0.5424 degrees ! Estimated noise=0.260803 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0035918 Jy ! Component: 100 - total flux cleaned = -0.00597123 Jy ! Component: 150 - total flux cleaned = -0.00738929 Jy ! Component: 200 - total flux cleaned = -0.00794378 Jy ! Total flux subtracted in 200 components = -0.00794378 Jy ! Clean residual min=-0.001922 max=0.001653 Jy/beam ! Clean residual mean=0.000003 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.415688 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 83 components and 0.415688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059040Jy sigma=1.105192 ! Fit after self-cal, rms=0.059047Jy sigma=1.104854 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000631263 Jy ! Component: 100 - total flux cleaned = -0.000873356 Jy ! Component: 150 - total flux cleaned = -0.00108308 Jy ! Component: 200 - total flux cleaned = -0.00120723 Jy ! Total flux subtracted in 200 components = -0.00120723 Jy ! Clean residual min=-0.001916 max=0.001529 Jy/beam ! Clean residual mean=0.000003 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.41448 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 97 components and 0.41448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059002Jy sigma=1.103906 ! Fit after self-cal, rms=0.059001Jy sigma=1.103881 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059001Jy sigma=1.103881 ! Fit after self-cal, rms=0.058913Jy sigma=1.100672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8934 mas, bmaj=1.611 mas, bpa=-0.5047 degrees ! Estimated noise=0.260805 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00235901 Jy ! Component: 100 - total flux cleaned = -0.00391463 Jy ! Component: 150 - total flux cleaned = -0.00457974 Jy ! Component: 200 - total flux cleaned = -0.00481436 Jy ! Total flux subtracted in 200 components = -0.00481436 Jy ! Clean residual min=-0.001568 max=0.001525 Jy/beam ! Clean residual mean=0.000001 rms=0.000345 Jy/beam ! Combined flux in latest and established models = 0.409666 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 100 components and 0.409666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058798Jy sigma=1.098029 ! Fit after self-cal, rms=0.058800Jy sigma=1.098004 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000217921 Jy ! Component: 100 - total flux cleaned = -0.000308106 Jy ! Component: 150 - total flux cleaned = -0.000391495 Jy ! Component: 200 - total flux cleaned = -0.00046598 Jy ! Total flux subtracted in 200 components = -0.00046598 Jy ! Clean residual min=-0.001571 max=0.001474 Jy/beam ! Clean residual mean=0.000001 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.4092 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 105 components and 0.4092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058774Jy sigma=1.097463 ! Fit after self-cal, rms=0.058773Jy sigma=1.097451 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058773Jy sigma=1.097451 ! Fit after self-cal, rms=0.058719Jy sigma=1.096224 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.11 mas, bmaj=2.516 mas, bpa=-0.4984 degrees ! Estimated noise=0.334867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00215847 Jy ! Component: 100 - total flux cleaned = -0.00294333 Jy ! Component: 150 - total flux cleaned = -0.00333284 Jy ! Component: 200 - total flux cleaned = -0.00360817 Jy ! Total flux subtracted in 200 components = -0.00360817 Jy ! Clean residual min=-0.001894 max=0.002012 Jy/beam ! Clean residual mean=0.000002 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.405592 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 114 components and 0.405592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058677Jy sigma=1.095127 ! Fit after self-cal, rms=0.058677Jy sigma=1.095109 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-37.2, 11.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194304 Jy ! Component: 100 - total flux cleaned = 0.00289063 Jy ! Component: 150 - total flux cleaned = 0.0030762 Jy ! Component: 200 - total flux cleaned = 0.00311788 Jy ! Total flux subtracted in 200 components = 0.00311788 Jy ! Clean residual min=-0.001728 max=0.001482 Jy/beam ! Clean residual mean=0.000003 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.40871 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 135 components and 0.40871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058639Jy sigma=1.094430 ! Fit after self-cal, rms=0.058636Jy sigma=1.094329 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8927 mas, bmaj=1.612 mas, bpa=-0.4863 degrees ! Estimated noise=0.260748 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8927 x 1.612 at -0.4863 degrees (North through East) ! Clean map min=-0.0012264 max=0.36151 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7058 mas, bmaj=1.27 mas, bpa=-3.089 degrees ! Estimated noise=0.384715 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.280481 Jy ! Component: 100 - total flux cleaned = 0.341644 Jy ! Component: 150 - total flux cleaned = 0.357466 Jy ! Component: 200 - total flux cleaned = 0.365069 Jy ! Total flux subtracted in 200 components = 0.365069 Jy ! Clean residual min=-0.002388 max=0.003689 Jy/beam ! Clean residual mean=0.000001 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.365069 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.365069 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8927 mas, bmaj=1.612 mas, bpa=-0.4863 degrees ! Estimated noise=0.260748 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00911184 Jy ! Component: 100 - total flux cleaned = 0.0154111 Jy ! Component: 150 - total flux cleaned = 0.0201403 Jy ! Component: 200 - total flux cleaned = 0.0238185 Jy ! Total flux subtracted in 200 components = 0.0238185 Jy ! Clean residual min=-0.001683 max=0.002726 Jy/beam ! Clean residual mean=-0.000001 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.388887 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 55 components and 0.388887 Jy ! Inverting map ! Added new window around map position (1.2, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00308627 Jy ! Component: 100 - total flux cleaned = 0.00550984 Jy ! Component: 150 - total flux cleaned = 0.00752678 Jy ! Component: 200 - total flux cleaned = 0.00925704 Jy ! Total flux subtracted in 200 components = 0.00925704 Jy ! Clean residual min=-0.001606 max=0.001667 Jy/beam ! Clean residual mean=0.000000 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.398144 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 79 components and 0.398145 Jy ! Inverting map ! Added new window around map position (-1.2, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176417 Jy ! Component: 100 - total flux cleaned = 0.00315726 Jy ! Component: 150 - total flux cleaned = 0.00419081 Jy ! Component: 200 - total flux cleaned = 0.00494236 Jy ! Total flux subtracted in 200 components = 0.00494236 Jy ! Clean residual min=-0.001463 max=0.001357 Jy/beam ! Clean residual mean=0.000001 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.403087 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 100 components and 0.403087 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.11 mas, bmaj=2.516 mas, bpa=-0.4984 degrees ! Estimated noise=0.334867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162917 Jy ! Component: 100 - total flux cleaned = 0.00279373 Jy ! Component: 150 - total flux cleaned = 0.00367762 Jy ! Component: 200 - total flux cleaned = 0.00430164 Jy ! Total flux subtracted in 200 components = 0.00430164 Jy ! Clean residual min=-0.001661 max=0.001356 Jy/beam ! Clean residual mean=0.000003 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.407389 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000448435 Jy ! Component: 100 - total flux cleaned = 0.00069257 Jy ! Component: 150 - total flux cleaned = 0.000836987 Jy ! Component: 200 - total flux cleaned = 0.000936606 Jy ! Total flux subtracted in 200 components = 0.000936606 Jy ! Clean residual min=-0.001646 max=0.001333 Jy/beam ! Clean residual mean=0.000003 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.408325 Jy ! Adding 92 model components to the UV plane model. ! The established model now contains 186 components and 0.408325 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8927 mas, bmaj=1.612 mas, bpa=-0.4863 degrees ! Estimated noise=0.260748 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000568575 Jy ! Component: 100 - total flux cleaned = -0.000361854 Jy ! Component: 150 - total flux cleaned = -0.000177354 Jy ! Component: 200 - total flux cleaned = -3.15881e-05 Jy ! Total flux subtracted in 200 components = -3.15881e-05 Jy ! Clean residual min=-0.001376 max=0.001269 Jy/beam ! Clean residual mean=0.000001 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.408294 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 204 components and 0.408294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058518Jy sigma=1.091998 ! Fit after self-cal, rms=0.058511Jy sigma=1.091892 wmodel J1419+3821_X_a_map.mod ! Writing 204 model components to file: J1419+3821_X_a_map.mod wobs J1419+3821_X_a_uvs.fits ! Writing UV FITS file: J1419+3821_X_a_uvs.fits wwins J1419+3821_X_a_map.win ! wwins: Wrote 7 windows to J1419+3821_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000231716 Jy ! Component: 100 - total flux cleaned = -0.000413807 Jy ! Component: 150 - total flux cleaned = -0.000543369 Jy ! Component: 200 - total flux cleaned = -0.000669801 Jy ! Component: 250 - total flux cleaned = -0.000855065 Jy ! Component: 300 - total flux cleaned = -0.000996622 Jy ! Component: 350 - total flux cleaned = -0.00115532 Jy ! Component: 400 - total flux cleaned = -0.0012917 Jy ! Component: 450 - total flux cleaned = -0.00136829 Jy ! Component: 500 - total flux cleaned = -0.00140592 Jy ! Component: 550 - total flux cleaned = -0.00142438 Jy ! Component: 600 - total flux cleaned = -0.00138763 Jy ! Component: 650 - total flux cleaned = -0.00142435 Jy ! Component: 700 - total flux cleaned = -0.00147873 Jy ! Component: 750 - total flux cleaned = -0.00151451 Jy ! Component: 800 - total flux cleaned = -0.00151445 Jy ! Component: 850 - total flux cleaned = -0.00153214 Jy ! Component: 900 - total flux cleaned = -0.00156714 Jy ! Component: 950 - total flux cleaned = -0.00158456 Jy ! Component: 1000 - total flux cleaned = -0.00165347 Jy ! Component: 1050 - total flux cleaned = -0.00163635 Jy ! Component: 1100 - total flux cleaned = -0.00172092 Jy ! Component: 1150 - total flux cleaned = -0.00168744 Jy ! Component: 1200 - total flux cleaned = -0.00178736 Jy ! Component: 1250 - total flux cleaned = -0.00173785 Jy ! Component: 1300 - total flux cleaned = -0.00181974 Jy ! Component: 1350 - total flux cleaned = -0.00173846 Jy ! Component: 1400 - total flux cleaned = -0.00181902 Jy ! Component: 1450 - total flux cleaned = -0.00180281 Jy ! Component: 1500 - total flux cleaned = -0.00178683 Jy ! Component: 1550 - total flux cleaned = -0.00178687 Jy ! Component: 1600 - total flux cleaned = -0.00180262 Jy ! Component: 1650 - total flux cleaned = -0.00178687 Jy ! Component: 1700 - total flux cleaned = -0.00184918 Jy ! Component: 1750 - total flux cleaned = -0.00180271 Jy ! Component: 1800 - total flux cleaned = -0.00184889 Jy ! Component: 1850 - total flux cleaned = -0.00194064 Jy ! Component: 1900 - total flux cleaned = -0.00187976 Jy ! Component: 1950 - total flux cleaned = -0.00192521 Jy ! Component: 2000 - total flux cleaned = -0.00198559 Jy ! Component: 2050 - total flux cleaned = -0.00201567 Jy ! Component: 2100 - total flux cleaned = -0.0020455 Jy ! Component: 2150 - total flux cleaned = -0.0020455 Jy ! Component: 2200 - total flux cleaned = -0.00207505 Jy ! Component: 2250 - total flux cleaned = -0.0020898 Jy ! Component: 2300 - total flux cleaned = -0.0021191 Jy ! Component: 2350 - total flux cleaned = -0.00214837 Jy ! Component: 2400 - total flux cleaned = -0.00216288 Jy ! Component: 2450 - total flux cleaned = -0.00223504 Jy ! Component: 2500 - total flux cleaned = -0.00223503 Jy ! Component: 2550 - total flux cleaned = -0.00223499 Jy ! Component: 2600 - total flux cleaned = -0.00233467 Jy ! Component: 2650 - total flux cleaned = -0.00229213 Jy ! Component: 2700 - total flux cleaned = -0.00233439 Jy ! Component: 2750 - total flux cleaned = -0.00236254 Jy ! Component: 2800 - total flux cleaned = -0.00232053 Jy ! Component: 2850 - total flux cleaned = -0.00229258 Jy ! Component: 2900 - total flux cleaned = -0.0023898 Jy ! Component: 2950 - total flux cleaned = -0.00244509 Jy ! Component: 3000 - total flux cleaned = -0.00240377 Jy ! Component: 3050 - total flux cleaned = -0.0024861 Jy ! Component: 3100 - total flux cleaned = -0.00251351 Jy ! Component: 3150 - total flux cleaned = -0.00252709 Jy ! Component: 3200 - total flux cleaned = -0.0025813 Jy ! Component: 3250 - total flux cleaned = -0.00260834 Jy ! Component: 3300 - total flux cleaned = -0.00263528 Jy ! Component: 3350 - total flux cleaned = -0.00270225 Jy ! Component: 3400 - total flux cleaned = -0.0026756 Jy ! Component: 3450 - total flux cleaned = -0.00274206 Jy ! Component: 3500 - total flux cleaned = -0.00282153 Jy ! Component: 3550 - total flux cleaned = -0.00282159 Jy ! Component: 3600 - total flux cleaned = -0.00288748 Jy ! Component: 3650 - total flux cleaned = -0.00290064 Jy ! Component: 3700 - total flux cleaned = -0.00293977 Jy ! Component: 3750 - total flux cleaned = -0.00297878 Jy ! Component: 3800 - total flux cleaned = -0.00295279 Jy ! Component: 3850 - total flux cleaned = -0.00301737 Jy ! Component: 3900 - total flux cleaned = -0.00304322 Jy ! Component: 3950 - total flux cleaned = -0.00314598 Jy ! Component: 4000 - total flux cleaned = -0.00315868 Jy ! Component: 4050 - total flux cleaned = -0.00315868 Jy ! Total flux subtracted in 4096 components = -0.00322229 Jy ! Clean residual min=-0.000736 max=0.000732 Jy/beam ! Clean residual mean=0.000000 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.405071 Jy keep ! Adding 337 model components to the UV plane model. ! The established model now contains 541 components and 0.405071 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1419+3821_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8927 x 1.612 at -0.4863 degrees (North through East) ! Clean map min=-0.0012192 max=0.36232 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1419+3821_X_a_map.fits wmodel /vlbi/uf001/uvm//J1419+3821_X_a_map.mod ! Writing 541 model components to file: /vlbi/uf001/uvm//J1419+3821_X_a_map.mod wobs /vlbi/uf001/uvm//J1419+3821_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1419+3821_X_a_uvs.fits wwins /vlbi/uf001/uvm//J1419+3821_X_a_map.win ! wwins: Wrote 8 windows to /vlbi/uf001/uvm//J1419+3821_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.362322 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000224882 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.186201 0.186201 0.372402 0.744804 1.48961 2.97922 5.95844 11.9169 23.8337 47.6675 95.335 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.362 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1611.16 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1419+3821_X_a_dfm.log closed on Sun Jan 13 21:45:16 2019