! Started logfile: /vlbi/uf001/uva//J1411+3705_S_dfm.log on Mon Jan 14 02:47:42 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1411+3705_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1411+3705_S_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.9 visibilities/baseline/integration-bin.
! Found source: J1411+3705
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5103 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1411+3705_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 80 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 80 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 80 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.016073Jy  sigma=22.185062
! Fit after  self-cal, rms=0.834415Jy  sigma=18.170468
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.103 mas, bmaj=4.901 mas, bpa=-8.466 degrees
! Estimated noise=0.657913 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.127571 Jy
! Component: 100  -  total flux cleaned = 0.158941 Jy
! Total flux subtracted in 100 components = 0.158941 Jy
! Clean residual min=-0.007065 max=0.011942 Jy/beam
! Clean residual mean=0.000025 rms=0.001672 Jy/beam
! Combined flux in latest and established models = 0.158941 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.158941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067832Jy  sigma=1.367008
! Fit after  self-cal, rms=0.067824Jy  sigma=1.366722
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0127737 Jy
! Component: 100  -  total flux cleaned = 0.0200375 Jy
! Total flux subtracted in 100 components = 0.0200375 Jy
! Clean residual min=-0.005685 max=0.009536 Jy/beam
! Clean residual mean=0.000021 rms=0.001335 Jy/beam
! Combined flux in latest and established models = 0.178979 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 27 components and 0.178979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064995Jy  sigma=1.301881
! Fit after  self-cal, rms=0.064955Jy  sigma=1.301104
! Inverting map 
! Added new window around map position (-2, 8.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00898774 Jy
! Component: 100  -  total flux cleaned = 0.0139772 Jy
! Total flux subtracted in 100 components = 0.0139772 Jy
! Clean residual min=-0.005416 max=0.005048 Jy/beam
! Clean residual mean=0.000015 rms=0.001134 Jy/beam
! Combined flux in latest and established models = 0.192956 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 44 components and 0.192956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063530Jy  sigma=1.268934
! Fit after  self-cal, rms=0.063423Jy  sigma=1.266841
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.62 mas, bmaj=5.79 mas, bpa=-6.751 degrees
! Estimated noise=0.504102 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00477769 Jy
! Component: 100  -  total flux cleaned = 0.00766516 Jy
! Component: 150  -  total flux cleaned = 0.00968333 Jy
! Component: 200  -  total flux cleaned = 0.0111393 Jy
! Total flux subtracted in 200 components = 0.0111393 Jy
! Clean residual min=-0.004021 max=0.004821 Jy/beam
! Clean residual mean=0.000015 rms=0.001013 Jy/beam
! Combined flux in latest and established models = 0.204095 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 63 components and 0.204095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063002Jy  sigma=1.257915
! Fit after  self-cal, rms=0.062973Jy  sigma=1.257325
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.62 x 5.79 at -6.751 degrees (North through East)
! Clean map  min=-0.0037502  max=0.16457 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        1.03     KP        1.04     
!   LA        0.96     MK        1.01     NL        1.04     OV        1.02     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.82     FD        1.00     HN        1.03     KP        1.04     
!   LA        0.96     MK        1.01     NL        1.08     OV        0.91     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.00     HN        1.05     KP        1.01     
!   LA        0.98     MK        1.02     NL        1.08     OV        1.00     
!   PT        1.00     SC        1.06     
! 
! 
! Fit before self-cal, rms=0.062973Jy  sigma=1.257325
! Fit after  self-cal, rms=0.060411Jy  sigma=1.228279
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.666 mas, bmaj=5.817 mas, bpa=-6.513 degrees
! Estimated noise=0.503113 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4, 18).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00444982 Jy
! Component: 100  -  total flux cleaned = 0.00651285 Jy
! Component: 150  -  total flux cleaned = 0.00722383 Jy
! Component: 200  -  total flux cleaned = 0.00768361 Jy
! Total flux subtracted in 200 components = 0.00768361 Jy
! Clean residual min=-0.002740 max=0.002709 Jy/beam
! Clean residual mean=0.000015 rms=0.000686 Jy/beam
! Combined flux in latest and established models = 0.211779 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 94 components and 0.211779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060037Jy  sigma=1.219587
! Fit after  self-cal, rms=0.059997Jy  sigma=1.218531
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059997Jy  sigma=1.218531
! Fit after  self-cal, rms=0.059669Jy  sigma=1.203546
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.654 mas, bmaj=5.825 mas, bpa=-6.721 degrees
! Estimated noise=0.502775 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000457766 Jy
! Component: 100  -  total flux cleaned = 0.000739925 Jy
! Component: 150  -  total flux cleaned = 0.00084466 Jy
! Component: 200  -  total flux cleaned = 0.000905192 Jy
! Total flux subtracted in 200 components = 0.000905192 Jy
! Clean residual min=-0.002395 max=0.002393 Jy/beam
! Clean residual mean=0.000002 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.212684 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 116 components and 0.212684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059625Jy  sigma=1.202611
! Fit after  self-cal, rms=0.059633Jy  sigma=1.202493
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000189058 Jy
! Component: 100  -  total flux cleaned = 0.000216631 Jy
! Component: 150  -  total flux cleaned = 0.000241801 Jy
! Component: 200  -  total flux cleaned = 0.0002648 Jy
! Total flux subtracted in 200 components = 0.0002648 Jy
! Clean residual min=-0.002384 max=0.002389 Jy/beam
! Clean residual mean=0.000002 rms=0.000544 Jy/beam
! Combined flux in latest and established models = 0.212949 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 124 components and 0.212949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059612Jy  sigma=1.202064
! Fit after  self-cal, rms=0.059609Jy  sigma=1.202042
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059609Jy  sigma=1.202042
! Fit after  self-cal, rms=0.059577Jy  sigma=1.201964
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.656 mas, bmaj=5.831 mas, bpa=-6.773 degrees
! Estimated noise=0.502395 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.27366e-05 Jy
! Component: 100  -  total flux cleaned = 9.51243e-06 Jy
! Component: 150  -  total flux cleaned = 3.10752e-05 Jy
! Component: 200  -  total flux cleaned = 5.14416e-05 Jy
! Total flux subtracted in 200 components = 5.14416e-05 Jy
! Clean residual min=-0.002385 max=0.002429 Jy/beam
! Clean residual mean=0.000003 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.213 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 128 components and 0.213 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059561Jy  sigma=1.201638
! Fit after  self-cal, rms=0.059559Jy  sigma=1.201620
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-32, -126.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150313 Jy
! Component: 100  -  total flux cleaned = 0.00150009 Jy
! Component: 150  -  total flux cleaned = 0.00162432 Jy
! Component: 200  -  total flux cleaned = 0.00176638 Jy
! Total flux subtracted in 200 components = 0.00176638 Jy
! Clean residual min=-0.002287 max=0.002071 Jy/beam
! Clean residual mean=0.000001 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.214767 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 139 components and 0.214767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059472Jy  sigma=1.200065
! Fit after  self-cal, rms=0.059470Jy  sigma=1.199994
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059470Jy  sigma=1.199994
! Fit after  self-cal, rms=0.059408Jy  sigma=1.199826
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.929 mas, bmaj=9.248 mas, bpa=-5.594 degrees
! Estimated noise=0.621416 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000258699 Jy
! Component: 100  -  total flux cleaned = -0.000155137 Jy
! Component: 150  -  total flux cleaned = -2.5206e-05 Jy
! Component: 200  -  total flux cleaned = 1.20632e-05 Jy
! Total flux subtracted in 200 components = 1.20632e-05 Jy
! Clean residual min=-0.002643 max=0.002449 Jy/beam
! Clean residual mean=0.000007 rms=0.000617 Jy/beam
! Combined flux in latest and established models = 0.214779 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 152 components and 0.214779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059398Jy  sigma=1.199653
! Fit after  self-cal, rms=0.059398Jy  sigma=1.199628
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.19629e-05 Jy
! Component: 100  -  total flux cleaned = -3.46856e-05 Jy
! Component: 150  -  total flux cleaned = -1.81755e-05 Jy
! Component: 200  -  total flux cleaned = -1.7565e-05 Jy
! Total flux subtracted in 200 components = -1.7565e-05 Jy
! Clean residual min=-0.002631 max=0.002393 Jy/beam
! Clean residual mean=0.000007 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.214761 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 157 components and 0.214761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059394Jy  sigma=1.199568
! Fit after  self-cal, rms=0.059393Jy  sigma=1.199561
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.66 mas, bmaj=5.837 mas, bpa=-6.819 degrees
! Estimated noise=0.50137 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.66 x 5.837 at -6.819 degrees (North through East)
! Clean map  min=-0.0021784  max=0.16392 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.132 mas, bmaj=4.943 mas, bpa=-8.497 degrees
! Estimated noise=0.659519 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.127746 Jy
! Component: 100  -  total flux cleaned = 0.159047 Jy
! Component: 150  -  total flux cleaned = 0.173417 Jy
! Component: 200  -  total flux cleaned = 0.18252 Jy
! Total flux subtracted in 200 components = 0.18252 Jy
! Clean residual min=-0.004152 max=0.004997 Jy/beam
! Clean residual mean=0.000011 rms=0.001042 Jy/beam
! Combined flux in latest and established models = 0.18252 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.18252 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.66 mas, bmaj=5.837 mas, bpa=-6.819 degrees
! Estimated noise=0.50137 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00756812 Jy
! Component: 100  -  total flux cleaned = 0.0128677 Jy
! Component: 150  -  total flux cleaned = 0.0168069 Jy
! Component: 200  -  total flux cleaned = 0.0198178 Jy
! Total flux subtracted in 200 components = 0.0198178 Jy
! Clean residual min=-0.002627 max=0.002633 Jy/beam
! Clean residual mean=0.000005 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.202338 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 68 components and 0.202338 Jy
! Inverting map 
! Added new window around map position (-49, -110).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00273486 Jy
! Component: 100  -  total flux cleaned = 0.00484623 Jy
! Component: 150  -  total flux cleaned = 0.00629363 Jy
! Component: 200  -  total flux cleaned = 0.0072516 Jy
! Total flux subtracted in 200 components = 0.0072516 Jy
! Clean residual min=-0.002372 max=0.002138 Jy/beam
! Clean residual mean=0.000001 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.20959 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 91 components and 0.20959 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.929 mas, bmaj=9.248 mas, bpa=-5.594 degrees
! Estimated noise=0.621416 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00207392 Jy
! Component: 100  -  total flux cleaned = 0.00301472 Jy
! Component: 150  -  total flux cleaned = 0.00341079 Jy
! Component: 200  -  total flux cleaned = 0.00375448 Jy
! Total flux subtracted in 200 components = 0.00375448 Jy
! Clean residual min=-0.002649 max=0.002442 Jy/beam
! Clean residual mean=0.000004 rms=0.000621 Jy/beam
! Combined flux in latest and established models = 0.213344 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000339778 Jy
! Component: 100  -  total flux cleaned = 0.000616641 Jy
! Component: 150  -  total flux cleaned = 0.000815196 Jy
! Component: 200  -  total flux cleaned = 0.000998635 Jy
! Total flux subtracted in 200 components = 0.000998635 Jy
! Clean residual min=-0.002583 max=0.002374 Jy/beam
! Clean residual mean=0.000004 rms=0.000607 Jy/beam
! Combined flux in latest and established models = 0.214343 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 133 components and 0.214343 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.66 mas, bmaj=5.837 mas, bpa=-6.819 degrees
! Estimated noise=0.50137 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000489964 Jy
! Component: 100  -  total flux cleaned = -0.000572589 Jy
! Component: 150  -  total flux cleaned = -0.000535623 Jy
! Component: 200  -  total flux cleaned = -0.000401011 Jy
! Total flux subtracted in 200 components = -0.000401011 Jy
! Clean residual min=-0.002158 max=0.001944 Jy/beam
! Clean residual mean=0.000001 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.213942 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 149 components and 0.213942 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059375Jy  sigma=1.198787
! Fit after  self-cal, rms=0.059365Jy  sigma=1.198655
wmodel J1411+3705_S_map.mod
! Writing 149 model components to file: J1411+3705_S_map.mod
wobs   J1411+3705_S_uvs.fits
! Writing UV FITS file: J1411+3705_S_uvs.fits
wwins  J1411+3705_S_map.win
! wwins: Wrote 5 windows to J1411+3705_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00045341 Jy
! Component: 100  -  total flux cleaned = -0.000418791 Jy
! Component: 150  -  total flux cleaned = -0.000451832 Jy
! Component: 200  -  total flux cleaned = -0.00054956 Jy
! Component: 250  -  total flux cleaned = -0.000644531 Jy
! Component: 300  -  total flux cleaned = -0.000644472 Jy
! Component: 350  -  total flux cleaned = -0.00064412 Jy
! Component: 400  -  total flux cleaned = -0.000644314 Jy
! Component: 450  -  total flux cleaned = -0.000672841 Jy
! Component: 500  -  total flux cleaned = -0.000700572 Jy
! Component: 550  -  total flux cleaned = -0.00067302 Jy
! Component: 600  -  total flux cleaned = -0.000672769 Jy
! Component: 650  -  total flux cleaned = -0.00064642 Jy
! Component: 700  -  total flux cleaned = -0.000620544 Jy
! Component: 750  -  total flux cleaned = -0.000798152 Jy
! Component: 800  -  total flux cleaned = -0.00082253 Jy
! Component: 850  -  total flux cleaned = -0.000871498 Jy
! Component: 900  -  total flux cleaned = -0.000895801 Jy
! Component: 950  -  total flux cleaned = -0.000991055 Jy
! Component: 1000  -  total flux cleaned = -0.00103759 Jy
! Component: 1050  -  total flux cleaned = -0.00115313 Jy
! Component: 1100  -  total flux cleaned = -0.00119872 Jy
! Component: 1150  -  total flux cleaned = -0.00131098 Jy
! Component: 1200  -  total flux cleaned = -0.00144432 Jy
! Component: 1250  -  total flux cleaned = -0.00153252 Jy
! Component: 1300  -  total flux cleaned = -0.00164119 Jy
! Component: 1350  -  total flux cleaned = -0.00179176 Jy
! Component: 1400  -  total flux cleaned = -0.00194062 Jy
! Component: 1450  -  total flux cleaned = -0.00208712 Jy
! Component: 1500  -  total flux cleaned = -0.00208752 Jy
! Component: 1550  -  total flux cleaned = -0.00225173 Jy
! Component: 1600  -  total flux cleaned = -0.0023125 Jy
! Component: 1650  -  total flux cleaned = -0.00251343 Jy
! Component: 1700  -  total flux cleaned = -0.00265288 Jy
! Component: 1750  -  total flux cleaned = -0.0027515 Jy
! Component: 1800  -  total flux cleaned = -0.00282932 Jy
! Component: 1850  -  total flux cleaned = -0.00296421 Jy
! Component: 1900  -  total flux cleaned = -0.00302172 Jy
! Component: 1950  -  total flux cleaned = -0.00309742 Jy
! Component: 2000  -  total flux cleaned = -0.00322897 Jy
! Component: 2050  -  total flux cleaned = -0.00337754 Jy
! Component: 2100  -  total flux cleaned = -0.00348772 Jy
! Component: 2150  -  total flux cleaned = -0.00365189 Jy
! Component: 2200  -  total flux cleaned = -0.0037239 Jy
! Component: 2250  -  total flux cleaned = -0.00379579 Jy
! Component: 2300  -  total flux cleaned = -0.00395593 Jy
! Component: 2350  -  total flux cleaned = -0.00404424 Jy
! Component: 2400  -  total flux cleaned = -0.00414924 Jy
! Component: 2450  -  total flux cleaned = -0.00421868 Jy
! Component: 2500  -  total flux cleaned = -0.00432183 Jy
! Component: 2550  -  total flux cleaned = -0.00450925 Jy
! Component: 2600  -  total flux cleaned = -0.00455984 Jy
! Component: 2650  -  total flux cleaned = -0.00464377 Jy
! Component: 2700  -  total flux cleaned = -0.00469391 Jy
! Component: 2750  -  total flux cleaned = -0.00482598 Jy
! Component: 2800  -  total flux cleaned = -0.00484222 Jy
! Component: 2850  -  total flux cleaned = -0.00495594 Jy
! Component: 2900  -  total flux cleaned = -0.00497211 Jy
! Component: 2950  -  total flux cleaned = -0.00497214 Jy
! Component: 3000  -  total flux cleaned = -0.00506764 Jy
! Component: 3050  -  total flux cleaned = -0.00513087 Jy
! Component: 3100  -  total flux cleaned = -0.00513103 Jy
! Component: 3150  -  total flux cleaned = -0.00516214 Jy
! Component: 3200  -  total flux cleaned = -0.00519322 Jy
! Component: 3250  -  total flux cleaned = -0.00527015 Jy
! Component: 3300  -  total flux cleaned = -0.00534672 Jy
! Component: 3350  -  total flux cleaned = -0.00533154 Jy
! Component: 3400  -  total flux cleaned = -0.0054071 Jy
! Component: 3450  -  total flux cleaned = -0.00540722 Jy
! Component: 3500  -  total flux cleaned = -0.00543708 Jy
! Component: 3550  -  total flux cleaned = -0.00551126 Jy
! Component: 3600  -  total flux cleaned = -0.00552595 Jy
! Component: 3650  -  total flux cleaned = -0.00554048 Jy
! Component: 3700  -  total flux cleaned = -0.00555486 Jy
! Component: 3750  -  total flux cleaned = -0.00556932 Jy
! Component: 3800  -  total flux cleaned = -0.00558377 Jy
! Component: 3850  -  total flux cleaned = -0.00564084 Jy
! Component: 3900  -  total flux cleaned = -0.00568348 Jy
! Component: 3950  -  total flux cleaned = -0.00562691 Jy
! Component: 4000  -  total flux cleaned = -0.00561306 Jy
! Component: 4050  -  total flux cleaned = -0.00572482 Jy
! Total flux subtracted in 4096 components = -0.00566916 Jy
! Clean residual min=-0.000845 max=0.000814 Jy/beam
! Clean residual mean=-0.000001 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.208273 Jy
keep
! Adding 294 model components to the UV plane model.
! The established model now contains 443 components and 0.208273 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1411+3705_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.66 x 5.837 at -6.819 degrees (North through East)
! Clean map  min=-0.0018111  max=0.16422 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1411+3705_S_map.fits
wmodel /vlbi/uf001/uva//J1411+3705_S_map.mod
! Writing 443 model components to file: /vlbi/uf001/uva//J1411+3705_S_map.mod
wobs   /vlbi/uf001/uva//J1411+3705_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1411+3705_S_uvs.fits
wwins  /vlbi/uf001/uva//J1411+3705_S_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J1411+3705_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.164224 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000251488 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.45941 0.45941 0.918821 1.83764 3.67528 7.35057 14.7011 29.4023 58.8045
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.164 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  653.011 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1411+3705_S_dfm.log closed on Mon Jan 14 02:47:46 2019