! Started logfile: /vlbi/uf001/uva//J1410+0203_S_dfm.log on Mon Jan 14 02:46:55 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1410+0203_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1410+0203_S_uva.fits ! AN table 1: 42 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.959656 visibilities/baseline/integration-bin. ! Found source: J1410+0203 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 4353 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1410+0203_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.157435Jy sigma=19.459624 ! Fit after self-cal, rms=0.519910Jy sigma=8.739641 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.656 mas, bmaj=6.539 mas, bpa=-3.563 degrees ! Estimated noise=0.838151 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.380277 Jy ! Component: 100 - total flux cleaned = 0.469958 Jy ! Total flux subtracted in 100 components = 0.469958 Jy ! Clean residual min=-0.021119 max=0.041483 Jy/beam ! Clean residual mean=0.000003 rms=0.007170 Jy/beam ! Combined flux in latest and established models = 0.469958 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.469958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.176355Jy sigma=2.247459 ! Fit after self-cal, rms=0.176352Jy sigma=2.247333 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.043 mas, bmaj=7.304 mas, bpa=-3.261 degrees ! Estimated noise=0.70431 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (18.5, -36.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0446447 Jy ! Component: 100 - total flux cleaned = 0.0550337 Jy ! Component: 150 - total flux cleaned = 0.0592667 Jy ! Component: 200 - total flux cleaned = 0.0614445 Jy ! Total flux subtracted in 200 components = 0.0614445 Jy ! Clean residual min=-0.016677 max=0.027985 Jy/beam ! Clean residual mean=-0.000002 rms=0.005810 Jy/beam ! Combined flux in latest and established models = 0.531402 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 33 components and 0.531402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.157205Jy sigma=1.988196 ! Fit after self-cal, rms=0.156620Jy sigma=1.978020 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.043 x 7.304 at -3.261 degrees (North through East) ! Clean map min=-0.024454 max=0.49077 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 HN 0.98 KP 1.07 LA 0.92 ! MK 1.02 NL 1.01 OV 0.95 PT 0.96 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 HN 0.96 KP 1.01 LA 0.92 ! MK 1.02 NL 1.02 OV 0.93 PT 0.99 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 HN 0.97 KP 1.02 LA 0.91 ! MK 1.05 NL 0.99 OV 0.97 PT 0.98 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.156620Jy sigma=1.978020 ! Fit after self-cal, rms=0.173766Jy sigma=1.866026 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=7.394 mas, bpa=-3.105 degrees ! Estimated noise=0.698147 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00689448 Jy ! Component: 100 - total flux cleaned = -0.0069005 Jy ! Component: 150 - total flux cleaned = -0.00644084 Jy ! Component: 200 - total flux cleaned = -0.00599716 Jy ! Total flux subtracted in 200 components = -0.00599716 Jy ! Clean residual min=-0.017410 max=0.021802 Jy/beam ! Clean residual mean=-0.000030 rms=0.004884 Jy/beam ! Combined flux in latest and established models = 0.525405 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 49 components and 0.525405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.168150Jy sigma=1.826435 ! Fit after self-cal, rms=0.167948Jy sigma=1.822840 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.167948Jy sigma=1.822840 ! Fit after self-cal, rms=0.108443Jy sigma=1.183452 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.053 mas, bmaj=7.39 mas, bpa=-3.212 degrees ! Estimated noise=0.699456 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00339444 Jy ! Component: 100 - total flux cleaned = 0.00320339 Jy ! Component: 150 - total flux cleaned = 0.00290034 Jy ! Component: 200 - total flux cleaned = 0.00276331 Jy ! Total flux subtracted in 200 components = 0.00276331 Jy ! Clean residual min=-0.006461 max=0.005601 Jy/beam ! Clean residual mean=-0.000017 rms=0.001533 Jy/beam ! Combined flux in latest and established models = 0.528168 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 58 components and 0.528168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.107678Jy sigma=1.172228 ! Fit after self-cal, rms=0.107843Jy sigma=1.171331 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000755831 Jy ! Component: 100 - total flux cleaned = -0.000873509 Jy ! Component: 150 - total flux cleaned = -0.00108688 Jy ! Component: 200 - total flux cleaned = -0.00128613 Jy ! Total flux subtracted in 200 components = -0.00128613 Jy ! Clean residual min=-0.005901 max=0.005482 Jy/beam ! Clean residual mean=-0.000016 rms=0.001491 Jy/beam ! Combined flux in latest and established models = 0.526882 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 68 components and 0.526882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.107525Jy sigma=1.167055 ! Fit after self-cal, rms=0.107516Jy sigma=1.166941 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.107516Jy sigma=1.166941 ! Fit after self-cal, rms=0.106275Jy sigma=1.125637 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.047 mas, bmaj=7.383 mas, bpa=-3.296 degrees ! Estimated noise=0.699336 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.05442e-05 Jy ! Component: 100 - total flux cleaned = 0.00081475 Jy ! Component: 150 - total flux cleaned = 0.00126035 Jy ! Component: 200 - total flux cleaned = 0.00186801 Jy ! Total flux subtracted in 200 components = 0.00186801 Jy ! Clean residual min=-0.004842 max=0.004146 Jy/beam ! Clean residual mean=-0.000012 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.52875 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 77 components and 0.52875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.105322Jy sigma=1.115613 ! Fit after self-cal, rms=0.105231Jy sigma=1.115010 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000315129 Jy ! Component: 100 - total flux cleaned = 0.000727113 Jy ! Component: 150 - total flux cleaned = 0.00117875 Jy ! Component: 200 - total flux cleaned = 0.00134355 Jy ! Total flux subtracted in 200 components = 0.00134355 Jy ! Clean residual min=-0.004540 max=0.003934 Jy/beam ! Clean residual mean=-0.000012 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.530094 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 82 components and 0.530094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104916Jy sigma=1.111922 ! Fit after self-cal, rms=0.104889Jy sigma=1.111801 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104889Jy sigma=1.111801 ! Fit after self-cal, rms=0.105658Jy sigma=1.107903 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.819 mas, bmaj=12.01 mas, bpa=-7.269 degrees ! Estimated noise=0.935743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000433108 Jy ! Component: 100 - total flux cleaned = 0.00131196 Jy ! Component: 150 - total flux cleaned = 0.00203344 Jy ! Component: 200 - total flux cleaned = 0.0026401 Jy ! Total flux subtracted in 200 components = 0.0026401 Jy ! Clean residual min=-0.004935 max=0.004399 Jy/beam ! Clean residual mean=-0.000027 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 0.532734 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 93 components and 0.532734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.105211Jy sigma=1.104236 ! Fit after self-cal, rms=0.105181Jy sigma=1.103956 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000128374 Jy ! Component: 100 - total flux cleaned = 0.000578392 Jy ! Component: 150 - total flux cleaned = 0.000643826 Jy ! Component: 200 - total flux cleaned = 0.000704227 Jy ! Total flux subtracted in 200 components = 0.000704227 Jy ! Clean residual min=-0.004676 max=0.004296 Jy/beam ! Clean residual mean=-0.000027 rms=0.001277 Jy/beam ! Combined flux in latest and established models = 0.533438 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 99 components and 0.533438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.105013Jy sigma=1.103179 ! Fit after self-cal, rms=0.104997Jy sigma=1.103089 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.044 mas, bmaj=7.381 mas, bpa=-3.309 degrees ! Estimated noise=0.698657 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.044 x 7.381 at -3.309 degrees (North through East) ! Clean map min=-0.011924 max=0.49152 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.654 mas, bmaj=6.603 mas, bpa=-3.597 degrees ! Estimated noise=0.837656 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.379936 Jy ! Component: 100 - total flux cleaned = 0.468506 Jy ! Component: 150 - total flux cleaned = 0.501872 Jy ! Component: 200 - total flux cleaned = 0.517706 Jy ! Total flux subtracted in 200 components = 0.517706 Jy ! Clean residual min=-0.006163 max=0.007934 Jy/beam ! Clean residual mean=-0.000003 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.517706 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.517706 Jy ! Inverting map and beam ! Estimated beam: bmin=3.044 mas, bmaj=7.381 mas, bpa=-3.309 degrees ! Estimated noise=0.698657 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00984286 Jy ! Component: 100 - total flux cleaned = 0.0109915 Jy ! Component: 150 - total flux cleaned = 0.0119304 Jy ! Component: 200 - total flux cleaned = 0.0127365 Jy ! Total flux subtracted in 200 components = 0.0127365 Jy ! Clean residual min=-0.003874 max=0.004707 Jy/beam ! Clean residual mean=-0.000009 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 0.530442 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 34 components and 0.530442 Jy ! Inverting map ! Added new window around map position (-24, 32). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266456 Jy ! Component: 100 - total flux cleaned = 0.00342648 Jy ! Component: 150 - total flux cleaned = 0.00368864 Jy ! Component: 200 - total flux cleaned = 0.00380269 Jy ! Total flux subtracted in 200 components = 0.00380269 Jy ! Clean residual min=-0.003973 max=0.003834 Jy/beam ! Clean residual mean=-0.000011 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 0.534245 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 50 components and 0.534245 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.819 mas, bmaj=12.01 mas, bpa=-7.269 degrees ! Estimated noise=0.935743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000419788 Jy ! Component: 100 - total flux cleaned = 2.73765e-05 Jy ! Component: 150 - total flux cleaned = -0.000191595 Jy ! Component: 200 - total flux cleaned = -0.000286891 Jy ! Total flux subtracted in 200 components = -0.000286891 Jy ! Clean residual min=-0.004926 max=0.003920 Jy/beam ! Clean residual mean=-0.000026 rms=0.001245 Jy/beam ! Combined flux in latest and established models = 0.533958 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.35927e-05 Jy ! Component: 100 - total flux cleaned = -0.000160994 Jy ! Component: 150 - total flux cleaned = -0.000230639 Jy ! Component: 200 - total flux cleaned = -0.000353245 Jy ! Total flux subtracted in 200 components = -0.000353245 Jy ! Clean residual min=-0.004500 max=0.003782 Jy/beam ! Clean residual mean=-0.000026 rms=0.001184 Jy/beam ! Combined flux in latest and established models = 0.533605 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 81 components and 0.533605 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.044 mas, bmaj=7.381 mas, bpa=-3.309 degrees ! Estimated noise=0.698657 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122739 Jy ! Component: 100 - total flux cleaned = 0.000124287 Jy ! Component: 150 - total flux cleaned = 0.000264798 Jy ! Component: 200 - total flux cleaned = 0.000325174 Jy ! Total flux subtracted in 200 components = 0.000325174 Jy ! Clean residual min=-0.003533 max=0.003355 Jy/beam ! Clean residual mean=-0.000011 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.53393 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 100 components and 0.53393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104447Jy sigma=1.099005 ! Fit after self-cal, rms=0.104308Jy sigma=1.097597 wmodel J1410+0203_S_map.mod ! Writing 100 model components to file: J1410+0203_S_map.mod wobs J1410+0203_S_uvs.fits ! Writing UV FITS file: J1410+0203_S_uvs.fits wwins J1410+0203_S_map.win ! wwins: Wrote 3 windows to J1410+0203_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 4.43837e-05 Jy ! Component: 100 - total flux cleaned = 0.000215844 Jy ! Component: 150 - total flux cleaned = 0.000379442 Jy ! Component: 200 - total flux cleaned = 0.000483927 Jy ! Component: 250 - total flux cleaned = 0.000382593 Jy ! Component: 300 - total flux cleaned = 0.000383375 Jy ! Component: 350 - total flux cleaned = 0.000429721 Jy ! Component: 400 - total flux cleaned = 0.00033658 Jy ! Component: 450 - total flux cleaned = 0.000336639 Jy ! Component: 500 - total flux cleaned = 0.000203321 Jy ! Component: 550 - total flux cleaned = 7.40792e-05 Jy ! Component: 600 - total flux cleaned = 7.46488e-05 Jy ! Component: 650 - total flux cleaned = -4.97013e-05 Jy ! Component: 700 - total flux cleaned = -0.000213442 Jy ! Component: 750 - total flux cleaned = -0.000333778 Jy ! Component: 800 - total flux cleaned = -0.000491732 Jy ! Component: 850 - total flux cleaned = -0.000530589 Jy ! Component: 900 - total flux cleaned = -0.000683201 Jy ! Component: 950 - total flux cleaned = -0.000758855 Jy ! Component: 1000 - total flux cleaned = -0.000981213 Jy ! Component: 1050 - total flux cleaned = -0.00119983 Jy ! Component: 1100 - total flux cleaned = -0.00148715 Jy ! Component: 1150 - total flux cleaned = -0.0015929 Jy ! Component: 1200 - total flux cleaned = -0.00183733 Jy ! Component: 1250 - total flux cleaned = -0.00190638 Jy ! Component: 1300 - total flux cleaned = -0.00207691 Jy ! Component: 1350 - total flux cleaned = -0.00204335 Jy ! Component: 1400 - total flux cleaned = -0.00217668 Jy ! Component: 1450 - total flux cleaned = -0.00237302 Jy ! Component: 1500 - total flux cleaned = -0.00243772 Jy ! Component: 1550 - total flux cleaned = -0.00253377 Jy ! Component: 1600 - total flux cleaned = -0.00266005 Jy ! Component: 1650 - total flux cleaned = -0.00278493 Jy ! Component: 1700 - total flux cleaned = -0.00275329 Jy ! Component: 1750 - total flux cleaned = -0.00296687 Jy ! Component: 1800 - total flux cleaned = -0.00302656 Jy ! Component: 1850 - total flux cleaned = -0.00299618 Jy ! Component: 1900 - total flux cleaned = -0.00308517 Jy ! Component: 1950 - total flux cleaned = -0.00323032 Jy ! Component: 2000 - total flux cleaned = -0.0032876 Jy ! Component: 2050 - total flux cleaned = -0.00325903 Jy ! Component: 2100 - total flux cleaned = -0.00328716 Jy ! Component: 2150 - total flux cleaned = -0.00334336 Jy ! Component: 2200 - total flux cleaned = -0.0032877 Jy ! Component: 2250 - total flux cleaned = -0.00328784 Jy ! Component: 2300 - total flux cleaned = -0.00323376 Jy ! Component: 2350 - total flux cleaned = -0.00326072 Jy ! Component: 2400 - total flux cleaned = -0.00320746 Jy ! Component: 2450 - total flux cleaned = -0.00310192 Jy ! Component: 2500 - total flux cleaned = -0.00315432 Jy ! Component: 2550 - total flux cleaned = -0.00305041 Jy ! Component: 2600 - total flux cleaned = -0.00315308 Jy ! Component: 2650 - total flux cleaned = -0.00305078 Jy ! Component: 2700 - total flux cleaned = -0.00297526 Jy ! Component: 2750 - total flux cleaned = -0.00300049 Jy ! Component: 2800 - total flux cleaned = -0.00290161 Jy ! Component: 2850 - total flux cleaned = -0.00287715 Jy ! Component: 2900 - total flux cleaned = -0.00285255 Jy ! Component: 2950 - total flux cleaned = -0.00273227 Jy ! Component: 3000 - total flux cleaned = -0.00261299 Jy ! Component: 3050 - total flux cleaned = -0.00258919 Jy ! Component: 3100 - total flux cleaned = -0.00251877 Jy ! Component: 3150 - total flux cleaned = -0.00242577 Jy ! Component: 3200 - total flux cleaned = -0.00249533 Jy ! Component: 3250 - total flux cleaned = -0.00235765 Jy ! Component: 3300 - total flux cleaned = -0.00219849 Jy ! Component: 3350 - total flux cleaned = -0.00219845 Jy ! Component: 3400 - total flux cleaned = -0.00217597 Jy ! Component: 3450 - total flux cleaned = -0.00204295 Jy ! Component: 3500 - total flux cleaned = -0.00204273 Jy ! Component: 3550 - total flux cleaned = -0.00186765 Jy ! Component: 3600 - total flux cleaned = -0.00173735 Jy ! Component: 3650 - total flux cleaned = -0.00178059 Jy ! Component: 3700 - total flux cleaned = -0.0017804 Jy ! Component: 3750 - total flux cleaned = -0.00152538 Jy ! Component: 3800 - total flux cleaned = -0.00144067 Jy ! Component: 3850 - total flux cleaned = -0.00144081 Jy ! Component: 3900 - total flux cleaned = -0.00131609 Jy ! Component: 3950 - total flux cleaned = -0.00129527 Jy ! Component: 4000 - total flux cleaned = -0.000987056 Jy ! Component: 4050 - total flux cleaned = -0.00102776 Jy ! Total flux subtracted in 4096 components = -0.000946657 Jy ! Clean residual min=-0.001347 max=0.001150 Jy/beam ! Clean residual mean=-0.000005 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.532984 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 403 components and 0.532984 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1410+0203_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.044 x 7.381 at -3.309 degrees (North through East) ! Clean map min=-0.0071968 max=0.49163 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1410+0203_S_map.fits wmodel /vlbi/uf001/uva//J1410+0203_S_map.mod ! Writing 403 model components to file: /vlbi/uf001/uva//J1410+0203_S_map.mod wobs /vlbi/uf001/uva//J1410+0203_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1410+0203_S_uvs.fits wwins /vlbi/uf001/uva//J1410+0203_S_map.win ! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1410+0203_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.491632 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000364475 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.222407 0.222407 0.444814 0.889628 1.77926 3.55851 7.11703 14.2341 28.4681 56.9362 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.491 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1348.88 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1410+0203_S_dfm.log closed on Mon Jan 14 02:46:59 2019