! Started logfile: /vlbi/uf001/uvm//J1408-0752_X_b_dfm.log on Sun Jan 13 21:43:44 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1408-0752_X_b_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1408-0752_X_b_uvm.fits ! AN table 1: 5 integrations on 36 of 36 possible baselines. ! AN table 2: 5 integrations on 36 of 36 possible baselines. ! AN table 3: 10 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.852632 visibilities/baseline/integration-bin. ! Found source: J1408-0752 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 5832 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1408-0752_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.314540Jy sigma=18.089753 ! Fit after self-cal, rms=0.354074Jy sigma=4.894785 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6958 mas, bmaj=1.714 mas, bpa=-1.944 degrees ! Estimated noise=1.03659 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.57353 Jy ! Component: 100 - total flux cleaned = 0.760338 Jy ! Total flux subtracted in 100 components = 0.760338 Jy ! Clean residual min=-0.053744 max=0.101500 Jy/beam ! Clean residual mean=0.000067 rms=0.013231 Jy/beam ! Combined flux in latest and established models = 0.760338 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.760338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.286362Jy sigma=3.857693 ! Fit after self-cal, rms=0.286148Jy sigma=3.855681 ! Inverting map ! Added new window around map position (-1.8, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112569 Jy ! Component: 100 - total flux cleaned = 0.189226 Jy ! Total flux subtracted in 100 components = 0.189226 Jy ! Clean residual min=-0.047531 max=0.077123 Jy/beam ! Clean residual mean=0.000050 rms=0.010254 Jy/beam ! Combined flux in latest and established models = 0.949564 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 25 components and 0.949564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.217386Jy sigma=2.864437 ! Fit after self-cal, rms=0.215177Jy sigma=2.831858 ! Inverting map ! Added new window around map position (1.8, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.069064 Jy ! Component: 100 - total flux cleaned = 0.105289 Jy ! Total flux subtracted in 100 components = 0.105289 Jy ! Clean residual min=-0.042447 max=0.048569 Jy/beam ! Clean residual mean=0.000040 rms=0.008801 Jy/beam ! Combined flux in latest and established models = 1.05485 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 34 components and 1.05485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.189498Jy sigma=2.449881 ! Fit after self-cal, rms=0.189171Jy sigma=2.445906 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9013 mas, bmaj=2.166 mas, bpa=-2.133 degrees ! Estimated noise=0.793512 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0410191 Jy ! Component: 100 - total flux cleaned = 0.056365 Jy ! Component: 150 - total flux cleaned = 0.0629907 Jy ! Component: 200 - total flux cleaned = 0.067027 Jy ! Total flux subtracted in 200 components = 0.067027 Jy ! Clean residual min=-0.034078 max=0.036425 Jy/beam ! Clean residual mean=0.000057 rms=0.008248 Jy/beam ! Combined flux in latest and established models = 1.12188 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 48 components and 1.12188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.177981Jy sigma=2.248364 ! Fit after self-cal, rms=0.177848Jy sigma=2.246950 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9013 x 2.166 at -2.133 degrees (North through East) ! Clean map min=-0.033131 max=0.75887 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 1.03 KP 1.08 ! LA 1.05 MK 1.03 NL 0.89 PT 1.00 ! SC 0.76 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 HN 1.65 KP 1.08 LA 1.05 ! MK 1.11 NL 1.05 OV 0.97 PT 0.96 ! SC 3.09 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 HN 1.06 KP 0.97 LA 0.97 ! NL 0.98 OV 0.87 PT 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 1.00 KP 1.11 ! LA 1.02 MK 0.99 NL 0.94 PT 1.02 ! SC 0.77 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 HN 1.68 KP 1.06 LA 1.06 ! MK 1.08 NL 1.10 OV 0.94 PT 0.97 ! SC 3.51 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.95 HN 1.07 KP 0.99 LA 1.00 ! NL 1.02 OV 0.87 PT 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.06 HN 1.00 KP 1.08 ! LA 1.03 MK 1.00 NL 0.92 PT 1.00 ! SC 0.74 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 HN 1.63 KP 1.04 LA 1.04 ! MK 1.05 NL 1.09 OV 0.96 PT 0.96 ! SC 2.87 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 HN 1.06 KP 0.97 LA 0.97 ! NL 0.98 OV 0.86 PT 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 0.97 KP 1.05 ! LA 1.04 MK 1.01 NL 0.94 PT 1.01 ! SC 0.75 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 HN 1.67 KP 1.09 LA 1.03 ! MK 1.06 NL 1.07 OV 0.93 PT 0.97 ! SC 3.47 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.96 HN 1.08 KP 0.97 LA 1.00 ! NL 0.99 OV 0.87 PT 0.94 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 1.00 KP 1.05 ! LA 1.03 MK 0.99 NL 0.94 PT 1.00 ! SC 0.77 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 HN 1.62 KP 1.08 LA 1.02 ! MK 1.09 NL 1.06 OV 0.94 PT 0.97 ! SC 4.05 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.95 HN 1.04 KP 0.98 LA 0.97 ! NL 0.98 OV 0.87 PT 0.92 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.06 HN 0.99 KP 1.04 ! LA 1.03 MK 1.01 NL 0.90 PT 1.01 ! SC 0.74 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 HN 1.68 KP 1.06 LA 1.05 ! MK 1.05 NL 1.07 OV 0.92 PT 0.97 ! SC 2.90 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.96 HN 1.04 KP 0.96 LA 0.99 ! NL 0.99 OV 0.87 PT 0.92 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 0.99 KP 1.06 ! LA 1.01 MK 1.00 NL 0.93 PT 1.02 ! SC 0.74 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 HN 1.66 KP 1.07 LA 1.04 ! MK 1.07 NL 1.09 OV 0.92 PT 0.96 ! SC 2.64 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.96 HN 1.00 KP 0.98 LA 0.99 ! NL 0.99 OV 0.86 PT 0.92 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.06 HN 0.95 KP 1.08 ! LA 1.02 MK 0.98 NL 0.94 PT 0.99 ! SC 0.75 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 HN 1.69 KP 1.07 LA 1.04 ! MK 1.04 NL 1.08 OV 0.95 PT 0.94 ! SC 2.87 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.95 HN 1.05 KP 0.97 LA 0.98 ! NL 0.97 OV 0.86 PT 0.92 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.96 KP 1.03 ! LA 1.02 MK 0.97 NL 0.95 PT 1.00 ! SC 0.79 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 HN 1.65 KP 1.05 LA 1.04 ! MK 1.04 NL 1.06 OV 0.91 PT 0.96 ! SC 2.79 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.94 HN 1.03 KP 0.97 LA 0.97 ! NL 0.98 OV 0.85 PT 0.93 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.97 KP 1.05 ! LA 1.04 MK 0.97 NL 0.92 PT 1.00 ! SC 0.74 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 HN 1.56 KP 1.07 LA 1.04 ! MK 1.05 NL 1.05 OV 0.94 PT 0.94 ! SC 2.64 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.93 HN 1.00 KP 0.97 LA 0.97 ! NL 0.97 OV 0.87 PT 0.94 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.99 KP 1.03 ! LA 1.01 MK 0.97 NL 0.94 PT 1.00 ! SC 0.76 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 HN 1.59 KP 1.07 LA 1.03 ! MK 1.06 NL 1.04 OV 0.93 PT 0.97 ! SC 2.44 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.94 HN 1.04 KP 0.97 LA 0.98 ! NL 0.97 OV 0.85 PT 0.92 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 0.99 KP 1.03 ! LA 1.02 MK 0.99 NL 0.92 PT 1.00 ! SC 0.75 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 HN 1.70 KP 1.04 LA 1.03 ! MK 1.00 NL 1.04 OV 0.91 PT 0.97 ! SC 2.17 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.94 HN 1.02 KP 0.97 LA 0.96 ! NL 0.95 OV 0.85 PT 0.92 ! ! ! Fit before self-cal, rms=0.177848Jy sigma=2.246950 ! Fit after self-cal, rms=0.150033Jy sigma=1.431304 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9094 mas, bmaj=2.334 mas, bpa=-3.76 degrees ! Estimated noise=0.809943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030718 Jy ! Component: 100 - total flux cleaned = 0.00306642 Jy ! Component: 150 - total flux cleaned = 0.00255449 Jy ! Component: 200 - total flux cleaned = 0.00210327 Jy ! Total flux subtracted in 200 components = 0.00210327 Jy ! Clean residual min=-0.017501 max=0.016236 Jy/beam ! Clean residual mean=0.000025 rms=0.003949 Jy/beam ! Combined flux in latest and established models = 1.12398 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 71 components and 1.12398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.145165Jy sigma=1.307226 ! Fit after self-cal, rms=0.145669Jy sigma=1.300181 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.145669Jy sigma=1.300181 ! Fit after self-cal, rms=0.142529Jy sigma=1.115222 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9111 mas, bmaj=2.346 mas, bpa=-3.795 degrees ! Estimated noise=0.809277 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0018455 Jy ! Component: 100 - total flux cleaned = -0.00226951 Jy ! Component: 150 - total flux cleaned = -0.00264138 Jy ! Component: 200 - total flux cleaned = -0.00298504 Jy ! Total flux subtracted in 200 components = -0.00298504 Jy ! Clean residual min=-0.011181 max=0.010621 Jy/beam ! Clean residual mean=0.000008 rms=0.002545 Jy/beam ! Combined flux in latest and established models = 1.121 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 84 components and 1.121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.140769Jy sigma=1.059252 ! Fit after self-cal, rms=0.140776Jy sigma=1.057533 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000780137 Jy ! Component: 100 - total flux cleaned = 0.000487172 Jy ! Component: 150 - total flux cleaned = 0.000748405 Jy ! Component: 200 - total flux cleaned = 0.000508855 Jy ! Total flux subtracted in 200 components = 0.000508855 Jy ! Clean residual min=-0.010188 max=0.010016 Jy/beam ! Clean residual mean=0.000007 rms=0.002398 Jy/beam ! Combined flux in latest and established models = 1.12151 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 87 components and 1.12151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.140047Jy sigma=1.027427 ! Fit after self-cal, rms=0.140063Jy sigma=1.026438 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.140063Jy sigma=1.026438 ! Fit after self-cal, rms=0.146771Jy sigma=1.019420 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9122 mas, bmaj=2.356 mas, bpa=-3.78 degrees ! Estimated noise=0.809476 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00456196 Jy ! Component: 100 - total flux cleaned = -0.00511413 Jy ! Component: 150 - total flux cleaned = -0.00510722 Jy ! Component: 200 - total flux cleaned = -0.00533686 Jy ! Total flux subtracted in 200 components = -0.00533686 Jy ! Clean residual min=-0.009164 max=0.009531 Jy/beam ! Clean residual mean=0.000008 rms=0.002190 Jy/beam ! Combined flux in latest and established models = 1.11617 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 87 components and 1.11617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.145978Jy sigma=0.990690 ! Fit after self-cal, rms=0.146006Jy sigma=0.990126 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, -10.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00738095 Jy ! Component: 100 - total flux cleaned = 0.00759301 Jy ! Component: 150 - total flux cleaned = 0.00780404 Jy ! Component: 200 - total flux cleaned = 0.00818893 Jy ! Total flux subtracted in 200 components = 0.00818893 Jy ! Clean residual min=-0.008717 max=0.008025 Jy/beam ! Clean residual mean=0.000007 rms=0.002043 Jy/beam ! Combined flux in latest and established models = 1.12436 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 100 components and 1.12436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.145316Jy sigma=0.967931 ! Fit after self-cal, rms=0.145310Jy sigma=0.967264 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.145310Jy sigma=0.967264 ! Fit after self-cal, rms=0.149940Jy sigma=0.962832 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.303 mas, bmaj=4.415 mas, bpa=-2.587 degrees ! Estimated noise=1.00883 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00336133 Jy ! Component: 100 - total flux cleaned = -0.00334824 Jy ! Component: 150 - total flux cleaned = -0.00268418 Jy ! Component: 200 - total flux cleaned = -0.00269687 Jy ! Total flux subtracted in 200 components = -0.00269687 Jy ! Clean residual min=-0.008536 max=0.008419 Jy/beam ! Clean residual mean=0.000011 rms=0.002443 Jy/beam ! Combined flux in latest and established models = 1.12166 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 111 components and 1.12166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.149567Jy sigma=0.958605 ! Fit after self-cal, rms=0.149579Jy sigma=0.958170 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00095998 Jy ! Component: 100 - total flux cleaned = 0.00106239 Jy ! Component: 150 - total flux cleaned = 0.000887081 Jy ! Component: 200 - total flux cleaned = 0.000808146 Jy ! Total flux subtracted in 200 components = 0.000808146 Jy ! Clean residual min=-0.008482 max=0.008322 Jy/beam ! Clean residual mean=0.000010 rms=0.002411 Jy/beam ! Combined flux in latest and established models = 1.12247 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 123 components and 1.12247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.149456Jy sigma=0.956178 ! Fit after self-cal, rms=0.149461Jy sigma=0.955907 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9119 mas, bmaj=2.359 mas, bpa=-3.753 degrees ! Estimated noise=0.808342 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9119 x 2.359 at -3.753 degrees (North through East) ! Clean map min=-0.0097072 max=0.76672 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.149461Jy sigma=0.955907 ! Fit after self-cal, rms=0.147642Jy sigma=0.900583 ! Inverting map and beam ! Estimated beam: bmin=0.9106 mas, bmaj=2.353 mas, bpa=-3.69 degrees ! Estimated noise=0.807091 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0046177 Jy ! Component: 100 - total flux cleaned = -0.00519449 Jy ! Component: 150 - total flux cleaned = -0.00536314 Jy ! Component: 200 - total flux cleaned = -0.00537352 Jy ! Total flux subtracted in 200 components = -0.00537352 Jy ! Clean residual min=-0.007880 max=0.007066 Jy/beam ! Clean residual mean=0.000006 rms=0.001730 Jy/beam ! Combined flux in latest and established models = 1.1171 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 129 components and 1.1171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.147197Jy sigma=0.884536 ! Fit after self-cal, rms=0.147230Jy sigma=0.884251 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145141 Jy ! Component: 100 - total flux cleaned = 0.000140881 Jy ! Component: 150 - total flux cleaned = 1.3612e-05 Jy ! Component: 200 - total flux cleaned = 0.000143846 Jy ! Total flux subtracted in 200 components = 0.000143846 Jy ! Clean residual min=-0.007478 max=0.006758 Jy/beam ! Clean residual mean=0.000006 rms=0.001686 Jy/beam ! Combined flux in latest and established models = 1.11724 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 137 components and 1.11724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.147049Jy sigma=0.875298 ! Fit after self-cal, rms=0.147068Jy sigma=0.874988 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.147068Jy sigma=0.874988 ! Fit after self-cal, rms=0.150696Jy sigma=0.871920 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6985 mas, bmaj=1.857 mas, bpa=-3.677 degrees ! Estimated noise=1.07796 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.587818 Jy ! Component: 100 - total flux cleaned = 0.762428 Jy ! Component: 150 - total flux cleaned = 0.851535 Jy ! Component: 200 - total flux cleaned = 0.908133 Jy ! Total flux subtracted in 200 components = 0.908133 Jy ! Clean residual min=-0.017703 max=0.038135 Jy/beam ! Clean residual mean=0.000029 rms=0.004442 Jy/beam ! Combined flux in latest and established models = 0.908133 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.908133 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9109 mas, bmaj=2.356 mas, bpa=-3.659 degrees ! Estimated noise=0.806451 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0587219 Jy ! Component: 100 - total flux cleaned = 0.0935115 Jy ! Component: 150 - total flux cleaned = 0.117721 Jy ! Component: 200 - total flux cleaned = 0.136218 Jy ! Total flux subtracted in 200 components = 0.136218 Jy ! Clean residual min=-0.010227 max=0.013790 Jy/beam ! Clean residual mean=0.000016 rms=0.002604 Jy/beam ! Combined flux in latest and established models = 1.04435 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 61 components and 1.04435 Jy ! Inverting map ! Added new window around map position (-7.4, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153858 Jy ! Component: 100 - total flux cleaned = 0.0273542 Jy ! Component: 150 - total flux cleaned = 0.0370557 Jy ! Component: 200 - total flux cleaned = 0.0449851 Jy ! Total flux subtracted in 200 components = 0.0449851 Jy ! Clean residual min=-0.007409 max=0.007805 Jy/beam ! Clean residual mean=0.000008 rms=0.001742 Jy/beam ! Combined flux in latest and established models = 1.08934 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 82 components and 1.08933 Jy ! Inverting map ! Added new window around map position (17.2, -25.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00687925 Jy ! Component: 100 - total flux cleaned = 0.0108059 Jy ! Component: 150 - total flux cleaned = 0.0136941 Jy ! Component: 200 - total flux cleaned = 0.016117 Jy ! Total flux subtracted in 200 components = 0.016117 Jy ! Clean residual min=-0.006432 max=0.005976 Jy/beam ! Clean residual mean=0.000007 rms=0.001538 Jy/beam ! Combined flux in latest and established models = 1.10545 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 100 components and 1.10545 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.307 mas, bmaj=4.414 mas, bpa=-2.501 degrees ! Estimated noise=1.00695 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321226 Jy ! Component: 100 - total flux cleaned = 0.00446218 Jy ! Component: 150 - total flux cleaned = 0.0055429 Jy ! Component: 200 - total flux cleaned = 0.00608358 Jy ! Total flux subtracted in 200 components = 0.00608358 Jy ! Clean residual min=-0.006463 max=0.006393 Jy/beam ! Clean residual mean=0.000008 rms=0.002042 Jy/beam ! Combined flux in latest and established models = 1.11154 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000714394 Jy ! Component: 100 - total flux cleaned = 0.00123678 Jy ! Component: 150 - total flux cleaned = 0.00179782 Jy ! Component: 200 - total flux cleaned = 0.00213406 Jy ! Total flux subtracted in 200 components = 0.00213406 Jy ! Clean residual min=-0.006053 max=0.006520 Jy/beam ! Clean residual mean=0.000007 rms=0.001981 Jy/beam ! Combined flux in latest and established models = 1.11367 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 157 components and 1.11367 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9109 mas, bmaj=2.356 mas, bpa=-3.659 degrees ! Estimated noise=0.806451 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106864 Jy ! Component: 100 - total flux cleaned = 0.00218103 Jy ! Component: 150 - total flux cleaned = 0.00242769 Jy ! Component: 200 - total flux cleaned = 0.00265696 Jy ! Total flux subtracted in 200 components = 0.00265696 Jy ! Clean residual min=-0.005953 max=0.005162 Jy/beam ! Clean residual mean=0.000004 rms=0.001392 Jy/beam ! Combined flux in latest and established models = 1.11633 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 175 components and 1.11633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.150819Jy sigma=0.835093 ! Fit after self-cal, rms=0.150331Jy sigma=0.831341 wmodel J1408-0752_X_b_map.mod ! Writing 175 model components to file: J1408-0752_X_b_map.mod wobs J1408-0752_X_b_uvs.fits ! Writing UV FITS file: J1408-0752_X_b_uvs.fits wwins J1408-0752_X_b_map.win ! wwins: Wrote 8 windows to J1408-0752_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00218217 Jy ! Component: 100 - total flux cleaned = -0.00388294 Jy ! Component: 150 - total flux cleaned = -0.00522425 Jy ! Component: 200 - total flux cleaned = -0.00651318 Jy ! Component: 250 - total flux cleaned = -0.00767784 Jy ! Component: 300 - total flux cleaned = -0.00856643 Jy ! Component: 350 - total flux cleaned = -0.00927355 Jy ! Component: 400 - total flux cleaned = -0.00988454 Jy ! Component: 450 - total flux cleaned = -0.0103341 Jy ! Component: 500 - total flux cleaned = -0.0109195 Jy ! Component: 550 - total flux cleaned = -0.0111328 Jy ! Component: 600 - total flux cleaned = -0.0112734 Jy ! Component: 650 - total flux cleaned = -0.0116179 Jy ! Component: 700 - total flux cleaned = -0.0116183 Jy ! Component: 750 - total flux cleaned = -0.0117513 Jy ! Component: 800 - total flux cleaned = -0.0118829 Jy ! Component: 850 - total flux cleaned = -0.0122033 Jy ! Component: 900 - total flux cleaned = -0.0122663 Jy ! Component: 950 - total flux cleaned = -0.0122048 Jy ! Component: 1000 - total flux cleaned = -0.0121434 Jy ! Component: 1050 - total flux cleaned = -0.0122042 Jy ! Component: 1100 - total flux cleaned = -0.0122044 Jy ! Component: 1150 - total flux cleaned = -0.0122057 Jy ! Component: 1200 - total flux cleaned = -0.0122056 Jy ! Component: 1250 - total flux cleaned = -0.0123198 Jy ! Component: 1300 - total flux cleaned = -0.0122074 Jy ! Component: 1350 - total flux cleaned = -0.0122072 Jy ! Component: 1400 - total flux cleaned = -0.0122608 Jy ! Component: 1450 - total flux cleaned = -0.0120448 Jy ! Component: 1500 - total flux cleaned = -0.0122053 Jy ! Component: 1550 - total flux cleaned = -0.012047 Jy ! Component: 1600 - total flux cleaned = -0.0120469 Jy ! Component: 1650 - total flux cleaned = -0.011943 Jy ! Component: 1700 - total flux cleaned = -0.0117385 Jy ! Component: 1750 - total flux cleaned = -0.0114365 Jy ! Component: 1800 - total flux cleaned = -0.0112377 Jy ! Component: 1850 - total flux cleaned = -0.0109913 Jy ! Component: 1900 - total flux cleaned = -0.0109423 Jy ! Component: 1950 - total flux cleaned = -0.0106036 Jy ! Component: 2000 - total flux cleaned = -0.0107482 Jy ! Component: 2050 - total flux cleaned = -0.0105581 Jy ! Component: 2100 - total flux cleaned = -0.0104638 Jy ! Component: 2150 - total flux cleaned = -0.0103241 Jy ! Component: 2200 - total flux cleaned = -0.0103239 Jy ! Component: 2250 - total flux cleaned = -0.0102326 Jy ! Component: 2300 - total flux cleaned = -0.0100958 Jy ! Component: 2350 - total flux cleaned = -0.0099601 Jy ! Component: 2400 - total flux cleaned = -0.00960223 Jy ! Component: 2450 - total flux cleaned = -0.00960234 Jy ! Component: 2500 - total flux cleaned = -0.00964709 Jy ! Component: 2550 - total flux cleaned = -0.00947282 Jy ! Component: 2600 - total flux cleaned = -0.00942907 Jy ! Component: 2650 - total flux cleaned = -0.00938572 Jy ! Component: 2700 - total flux cleaned = -0.00930041 Jy ! Component: 2750 - total flux cleaned = -0.00925796 Jy ! Component: 2800 - total flux cleaned = -0.00921595 Jy ! Component: 2850 - total flux cleaned = -0.0093417 Jy ! Component: 2900 - total flux cleaned = -0.00913406 Jy ! Component: 2950 - total flux cleaned = -0.00946425 Jy ! Component: 3000 - total flux cleaned = -0.0091773 Jy ! Component: 3050 - total flux cleaned = -0.00913651 Jy ! Component: 3100 - total flux cleaned = -0.00925782 Jy ! Component: 3150 - total flux cleaned = -0.0090569 Jy ! Component: 3200 - total flux cleaned = -0.00921663 Jy ! Component: 3250 - total flux cleaned = -0.00901824 Jy ! Component: 3300 - total flux cleaned = -0.00917617 Jy ! Component: 3350 - total flux cleaned = -0.0089802 Jy ! Component: 3400 - total flux cleaned = -0.00898051 Jy ! Component: 3450 - total flux cleaned = -0.0090191 Jy ! Component: 3500 - total flux cleaned = -0.00901908 Jy ! Component: 3550 - total flux cleaned = -0.00886595 Jy ! Component: 3600 - total flux cleaned = -0.00875164 Jy ! Component: 3650 - total flux cleaned = -0.00875204 Jy ! Component: 3700 - total flux cleaned = -0.00871457 Jy ! Component: 3750 - total flux cleaned = -0.00871453 Jy ! Component: 3800 - total flux cleaned = -0.0085656 Jy ! Component: 3850 - total flux cleaned = -0.00856527 Jy ! Component: 3900 - total flux cleaned = -0.0085287 Jy ! Component: 3950 - total flux cleaned = -0.00860174 Jy ! Component: 4000 - total flux cleaned = -0.0084564 Jy ! Component: 4050 - total flux cleaned = -0.00845683 Jy ! Total flux subtracted in 4096 components = -0.00852886 Jy ! Clean residual min=-0.002079 max=0.001806 Jy/beam ! Clean residual mean=-0.000001 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 1.1078 Jy keep ! Adding 319 model components to the UV plane model. ! The established model now contains 494 components and 1.1078 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1408-0752_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9109 x 2.356 at -3.659 degrees (North through East) ! Clean map min=-0.0044434 max=0.78578 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1408-0752_X_b_map.fits wmodel /vlbi/uf001/uvm//J1408-0752_X_b_map.mod ! Writing 494 model components to file: /vlbi/uf001/uvm//J1408-0752_X_b_map.mod wobs /vlbi/uf001/uvm//J1408-0752_X_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1408-0752_X_b_uvs.fits wwins /vlbi/uf001/uvm//J1408-0752_X_b_map.win ! wwins: Wrote 9 windows to /vlbi/uf001/uvm//J1408-0752_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.785777 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00064192 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.245077 0.245077 0.490155 0.980309 1.96062 3.92124 7.84247 15.6849 31.3699 62.7398 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.785 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1224.1 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1408-0752_X_b_dfm.log closed on Sun Jan 13 21:43:49 2019