! Started logfile: /vlbi/uf001/uva//J1404+6551_X_dfm.log on Mon Jan 14 02:44:22 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J1404+6551_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1404+6551_X_uva.fits
! AN table 1: 76 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.971053 visibilities/baseline/integration-bin.
! Found source: J1404+6551
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 39852 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1404+6551_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.018867Jy  sigma=23.393507
! Fit after  self-cal, rms=0.824175Jy  sigma=18.878990
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8133 mas, bmaj=0.8595 mas, bpa=35.18 degrees
! Estimated noise=0.342382 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.137588 Jy
! Component: 100  -  total flux cleaned = 0.167625 Jy
! Total flux subtracted in 100 components = 0.167625 Jy
! Clean residual min=-0.004463 max=0.008827 Jy/beam
! Clean residual mean=-0.000009 rms=0.001001 Jy/beam
! Combined flux in latest and established models = 0.167625 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.167625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066224Jy  sigma=1.452797
! Fit after  self-cal, rms=0.066218Jy  sigma=1.452700
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00876231 Jy
! Component: 100  -  total flux cleaned = 0.0127441 Jy
! Total flux subtracted in 100 components = 0.0127441 Jy
! Clean residual min=-0.004296 max=0.005520 Jy/beam
! Clean residual mean=-0.000007 rms=0.000919 Jy/beam
! Combined flux in latest and established models = 0.180369 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 8 components and 0.180369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064917Jy  sigma=1.416223
! Fit after  self-cal, rms=0.064920Jy  sigma=1.416122
! Inverting map 
! Added new window around map position (3.4, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00505984 Jy
! Component: 100  -  total flux cleaned = 0.00640887 Jy
! Total flux subtracted in 100 components = 0.00640887 Jy
! Clean residual min=-0.004058 max=0.004531 Jy/beam
! Clean residual mean=-0.000007 rms=0.000884 Jy/beam
! Combined flux in latest and established models = 0.186778 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.186778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064463Jy  sigma=1.404779
! Fit after  self-cal, rms=0.064443Jy  sigma=1.404151
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.089 mas, bmaj=1.131 mas, bpa=35.73 degrees
! Estimated noise=0.164383 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00362837 Jy
! Component: 100  -  total flux cleaned = 0.00594058 Jy
! Component: 150  -  total flux cleaned = 0.00702884 Jy
! Component: 200  -  total flux cleaned = 0.00747954 Jy
! Total flux subtracted in 200 components = 0.00747954 Jy
! Clean residual min=-0.004437 max=0.005841 Jy/beam
! Clean residual mean=-0.000014 rms=0.001184 Jy/beam
! Combined flux in latest and established models = 0.194258 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 23 components and 0.194258 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064218Jy  sigma=1.398308
! Fit after  self-cal, rms=0.064213Jy  sigma=1.398036
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.089 x 1.131 at 35.73 degrees (North through East)
! Clean map  min=-0.0042843  max=0.1777 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.99     HN        1.02     KP        1.04     
!   LA        0.96     MK        1.06     NL        1.12     OV        0.94     
!   PT        0.96     SC        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.00     HN        1.00     KP        1.02     
!   LA        0.95     MK        1.04     NL        1.12     OV        0.95     
!   PT        0.96     SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.00     HN        0.98     KP        1.03     
!   LA        0.96     MK        1.04     NL        1.10     OV        0.94     
!   PT        0.97     SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.99     HN        0.99     KP        1.03     
!   LA        0.97     MK        1.04     NL        1.11     OV        0.94     
!   PT        0.95     SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.00     HN        1.00     KP        1.02     
!   LA        1.00     MK        1.04     NL        1.10     OV        0.94     
!   PT        0.95     SC        0.96     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.99     HN        0.99     KP        1.01     
!   LA        0.98     MK        1.04     NL        1.11     OV        0.95     
!   PT        0.93     SC        0.94     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.00     HN        1.01     KP        1.00     
!   LA        0.99     MK        1.04     NL        1.09     OV        0.94     
!   PT        0.94     SC        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.00     HN        0.98     KP        1.02     
!   LA        1.00     MK        1.03     NL        1.08     OV        0.94     
!   PT        0.94     SC        0.93     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.98     HN        1.01     KP        0.98     
!   LA        1.00     MK        1.02     NL        1.09     OV        0.92     
!   PT        0.93     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.98     HN        1.02     KP        1.02     
!   LA        0.99     MK        1.03     NL        1.08     OV        0.91     
!   PT        0.94     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.98     HN        1.00     KP        0.99     
!   LA        0.98     MK        1.05     NL        1.09     OV        0.92     
!   PT        0.93     SC        0.95     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.97     HN        0.99     KP        0.97     
!   LA        0.99     MK        1.04     NL        1.10     OV        0.91     
!   PT        0.93     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.064213Jy  sigma=1.398036
! Fit after  self-cal, rms=0.063237Jy  sigma=1.361977
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.087 mas, bmaj=1.137 mas, bpa=35.81 degrees
! Estimated noise=0.164653 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00130529 Jy
! Component: 100  -  total flux cleaned = -0.00137229 Jy
! Component: 150  -  total flux cleaned = -0.00140172 Jy
! Component: 200  -  total flux cleaned = -0.001375 Jy
! Total flux subtracted in 200 components = -0.001375 Jy
! Clean residual min=-0.003502 max=0.005070 Jy/beam
! Clean residual mean=-0.000007 rms=0.001037 Jy/beam
! Combined flux in latest and established models = 0.192883 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 31 components and 0.192883 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063192Jy  sigma=1.360919
! Fit after  self-cal, rms=0.063231Jy  sigma=1.360667
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063231Jy  sigma=1.360667
! Fit after  self-cal, rms=0.063296Jy  sigma=1.323817
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.086 mas, bmaj=1.136 mas, bpa=32.99 degrees
! Estimated noise=0.164958 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00105385 Jy
! Component: 100  -  total flux cleaned = -0.000878363 Jy
! Component: 150  -  total flux cleaned = -0.000733385 Jy
! Component: 200  -  total flux cleaned = -0.000631833 Jy
! Total flux subtracted in 200 components = -0.000631833 Jy
! Clean residual min=-0.003007 max=0.004647 Jy/beam
! Clean residual mean=-0.000006 rms=0.000864 Jy/beam
! Combined flux in latest and established models = 0.192251 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 35 components and 0.192251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063243Jy  sigma=1.322855
! Fit after  self-cal, rms=0.063276Jy  sigma=1.322627
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (32.2, -4.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00486946 Jy
! Component: 100  -  total flux cleaned = 0.00794465 Jy
! Component: 150  -  total flux cleaned = 0.0101318 Jy
! Component: 200  -  total flux cleaned = 0.0117342 Jy
! Total flux subtracted in 200 components = 0.0117342 Jy
! Clean residual min=-0.002660 max=0.003375 Jy/beam
! Clean residual mean=-0.000008 rms=0.000751 Jy/beam
! Combined flux in latest and established models = 0.203985 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 77 components and 0.203985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062914Jy  sigma=1.309948
! Fit after  self-cal, rms=0.062879Jy  sigma=1.309256
! Inverting map 
! Added new window around map position (-6, 17.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00303034 Jy
! Component: 100  -  total flux cleaned = 0.00482795 Jy
! Component: 150  -  total flux cleaned = 0.00620501 Jy
! Component: 200  -  total flux cleaned = 0.00730242 Jy
! Total flux subtracted in 200 components = 0.00730242 Jy
! Clean residual min=-0.002605 max=0.003037 Jy/beam
! Clean residual mean=-0.000010 rms=0.000710 Jy/beam
! Combined flux in latest and established models = 0.211288 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 106 components and 0.211288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062733Jy  sigma=1.304269
! Fit after  self-cal, rms=0.062725Jy  sigma=1.304100
! Inverting map 
! Added new window around map position (-28.4, -7.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0028393 Jy
! Component: 100  -  total flux cleaned = 0.0045578 Jy
! Component: 150  -  total flux cleaned = 0.00582278 Jy
! Component: 200  -  total flux cleaned = 0.00688921 Jy
! Total flux subtracted in 200 components = 0.00688921 Jy
! Clean residual min=-0.002585 max=0.002899 Jy/beam
! Clean residual mean=-0.000009 rms=0.000674 Jy/beam
! Combined flux in latest and established models = 0.218177 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 129 components and 0.218177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062591Jy  sigma=1.299869
! Fit after  self-cal, rms=0.062586Jy  sigma=1.299710
! Inverting map 
! Added new window around map position (-17.6, 23).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00270305 Jy
! Component: 100  -  total flux cleaned = 0.00436029 Jy
! Component: 150  -  total flux cleaned = 0.00557085 Jy
! Component: 200  -  total flux cleaned = 0.00656844 Jy
! Total flux subtracted in 200 components = 0.00656844 Jy
! Clean residual min=-0.002514 max=0.002693 Jy/beam
! Clean residual mean=-0.000009 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.224745 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 157 components and 0.224745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062454Jy  sigma=1.296093
! Fit after  self-cal, rms=0.062444Jy  sigma=1.295776
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062444Jy  sigma=1.295776
! Fit after  self-cal, rms=0.062447Jy  sigma=1.293860
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.087 mas, bmaj=1.138 mas, bpa=33.39 degrees
! Estimated noise=0.164549 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000839485 Jy
! Component: 100  -  total flux cleaned = 0.00170995 Jy
! Component: 150  -  total flux cleaned = 0.00255524 Jy
! Component: 200  -  total flux cleaned = 0.00327805 Jy
! Total flux subtracted in 200 components = 0.00327805 Jy
! Clean residual min=-0.002396 max=0.002759 Jy/beam
! Clean residual mean=-0.000007 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.228023 Jy
selfcal
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 167 components and 0.228023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062391Jy  sigma=1.292150
! Fit after  self-cal, rms=0.062393Jy  sigma=1.292070
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-29, -12.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00277457 Jy
! Component: 100  -  total flux cleaned = 0.00453098 Jy
! Component: 150  -  total flux cleaned = 0.00572791 Jy
! Component: 200  -  total flux cleaned = 0.00655706 Jy
! Total flux subtracted in 200 components = 0.00655706 Jy
! Clean residual min=-0.002256 max=0.002420 Jy/beam
! Clean residual mean=-0.000007 rms=0.000567 Jy/beam
! Combined flux in latest and established models = 0.23458 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 189 components and 0.23458 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062261Jy  sigma=1.288246
! Fit after  self-cal, rms=0.062254Jy  sigma=1.288142
! Inverting map 
! Added new window around map position (-30, -44.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00226208 Jy
! Component: 100  -  total flux cleaned = 0.00357324 Jy
! Component: 150  -  total flux cleaned = 0.00435096 Jy
! Component: 200  -  total flux cleaned = 0.00498652 Jy
! Total flux subtracted in 200 components = 0.00498652 Jy
! Clean residual min=-0.002068 max=0.002377 Jy/beam
! Clean residual mean=-0.000006 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.239567 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 210 components and 0.239567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062172Jy  sigma=1.285375
! Fit after  self-cal, rms=0.062161Jy  sigma=1.285177
! Inverting map 
! Added new window around map position (-9.8, 15.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00216551 Jy
! Component: 100  -  total flux cleaned = 0.00338665 Jy
! Component: 150  -  total flux cleaned = 0.00410368 Jy
! Component: 200  -  total flux cleaned = 0.00471243 Jy
! Total flux subtracted in 200 components = 0.00471243 Jy
! Clean residual min=-0.001943 max=0.001917 Jy/beam
! Clean residual mean=-0.000007 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.244279 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 234 components and 0.244279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062079Jy  sigma=1.282752
! Fit after  self-cal, rms=0.062071Jy  sigma=1.282661
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062071Jy  sigma=1.282661
! Fit after  self-cal, rms=0.062051Jy  sigma=1.282154
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.341 mas, bmaj=2.635 mas, bpa=59.83 degrees
! Estimated noise=0.206962 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00212935 Jy
! Component: 100  -  total flux cleaned = 0.00379321 Jy
! Component: 150  -  total flux cleaned = 0.00498505 Jy
! Component: 200  -  total flux cleaned = 0.00584321 Jy
! Total flux subtracted in 200 components = 0.00584321 Jy
! Clean residual min=-0.003191 max=0.003253 Jy/beam
! Clean residual mean=-0.000012 rms=0.000925 Jy/beam
! Combined flux in latest and established models = 0.250122 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 263 components and 0.250122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062032Jy  sigma=1.281116
! Fit after  self-cal, rms=0.062029Jy  sigma=1.281010
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010835 Jy
! Component: 100  -  total flux cleaned = 0.00184598 Jy
! Component: 150  -  total flux cleaned = 0.0024582 Jy
! Component: 200  -  total flux cleaned = 0.00287152 Jy
! Total flux subtracted in 200 components = 0.00287152 Jy
! Clean residual min=-0.003159 max=0.003226 Jy/beam
! Clean residual mean=-0.000012 rms=0.000915 Jy/beam
! Combined flux in latest and established models = 0.252994 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 273 components and 0.252994 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062026Jy  sigma=1.280733
! Fit after  self-cal, rms=0.062023Jy  sigma=1.280699
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.087 mas, bmaj=1.139 mas, bpa=33.69 degrees
! Estimated noise=0.164203 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.087 x 1.139 at 33.69 degrees (North through East)
! Clean map  min=-0.0018387  max=0.17846 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8101 mas, bmaj=0.8626 mas, bpa=35.24 degrees
! Estimated noise=0.343456 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.137969 Jy
! Component: 100  -  total flux cleaned = 0.168109 Jy
! Component: 150  -  total flux cleaned = 0.176706 Jy
! Component: 200  -  total flux cleaned = 0.18104 Jy
! Total flux subtracted in 200 components = 0.18104 Jy
! Clean residual min=-0.002994 max=0.002731 Jy/beam
! Clean residual mean=-0.000003 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.18104 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.18104 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.087 mas, bmaj=1.139 mas, bpa=33.69 degrees
! Estimated noise=0.164203 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00556384 Jy
! Component: 100  -  total flux cleaned = 0.0100664 Jy
! Component: 150  -  total flux cleaned = 0.0140507 Jy
! Component: 200  -  total flux cleaned = 0.0176533 Jy
! Total flux subtracted in 200 components = 0.0176533 Jy
! Clean residual min=-0.002561 max=0.003071 Jy/beam
! Clean residual mean=-0.000007 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.198693 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 68 components and 0.198693 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.341 mas, bmaj=2.635 mas, bpa=59.83 degrees
! Estimated noise=0.206962 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0064539 Jy
! Component: 100  -  total flux cleaned = 0.0116988 Jy
! Component: 150  -  total flux cleaned = 0.0162836 Jy
! Component: 200  -  total flux cleaned = 0.020338 Jy
! Total flux subtracted in 200 components = 0.020338 Jy
! Clean residual min=-0.003893 max=0.004243 Jy/beam
! Clean residual mean=-0.000016 rms=0.001215 Jy/beam
! Combined flux in latest and established models = 0.219031 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0036145 Jy
! Component: 100  -  total flux cleaned = 0.00685994 Jy
! Component: 150  -  total flux cleaned = 0.00979112 Jy
! Component: 200  -  total flux cleaned = 0.012448 Jy
! Total flux subtracted in 200 components = 0.012448 Jy
! Clean residual min=-0.003540 max=0.003509 Jy/beam
! Clean residual mean=-0.000015 rms=0.001059 Jy/beam
! Combined flux in latest and established models = 0.231479 Jy
! Adding 146 model components to the UV plane model.
! The established model now contains 192 components and 0.231479 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.087 mas, bmaj=1.139 mas, bpa=33.69 degrees
! Estimated noise=0.164203 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00179887 Jy
! Component: 100  -  total flux cleaned = 0.00338035 Jy
! Component: 150  -  total flux cleaned = 0.0048278 Jy
! Component: 200  -  total flux cleaned = 0.00616989 Jy
! Total flux subtracted in 200 components = 0.00616989 Jy
! Clean residual min=-0.001936 max=0.002006 Jy/beam
! Clean residual mean=-0.000007 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.237649 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 229 components and 0.237649 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062147Jy  sigma=1.283967
! Fit after  self-cal, rms=0.062119Jy  sigma=1.283531
wmodel J1404+6551_X_map.mod
! Writing 229 model components to file: J1404+6551_X_map.mod
wobs   J1404+6551_X_uvs.fits
! Writing UV FITS file: J1404+6551_X_uvs.fits
wwins  J1404+6551_X_map.win
! wwins: Wrote 9 windows to J1404+6551_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000340068 Jy
! Component: 100  -  total flux cleaned = 0.000585088 Jy
! Component: 150  -  total flux cleaned = 0.000822064 Jy
! Component: 200  -  total flux cleaned = 0.00115071 Jy
! Component: 250  -  total flux cleaned = 0.00137569 Jy
! Component: 300  -  total flux cleaned = 0.00172124 Jy
! Component: 350  -  total flux cleaned = 0.0020282 Jy
! Component: 400  -  total flux cleaned = 0.00226897 Jy
! Component: 450  -  total flux cleaned = 0.00244651 Jy
! Component: 500  -  total flux cleaned = 0.00259161 Jy
! Component: 550  -  total flux cleaned = 0.00270638 Jy
! Component: 600  -  total flux cleaned = 0.00295916 Jy
! Component: 650  -  total flux cleaned = 0.00312445 Jy
! Component: 700  -  total flux cleaned = 0.00323309 Jy
! Component: 750  -  total flux cleaned = 0.00334031 Jy
! Component: 800  -  total flux cleaned = 0.00352511 Jy
! Component: 850  -  total flux cleaned = 0.00362951 Jy
! Component: 900  -  total flux cleaned = 0.00368086 Jy
! Component: 950  -  total flux cleaned = 0.0039096 Jy
! Component: 1000  -  total flux cleaned = 0.00393448 Jy
! Component: 1050  -  total flux cleaned = 0.00408408 Jy
! Component: 1100  -  total flux cleaned = 0.0041579 Jy
! Component: 1150  -  total flux cleaned = 0.0043039 Jy
! Component: 1200  -  total flux cleaned = 0.00440037 Jy
! Component: 1250  -  total flux cleaned = 0.00447154 Jy
! Component: 1300  -  total flux cleaned = 0.00461306 Jy
! Component: 1350  -  total flux cleaned = 0.00472981 Jy
! Component: 1400  -  total flux cleaned = 0.00482218 Jy
! Component: 1450  -  total flux cleaned = 0.00484504 Jy
! Component: 1500  -  total flux cleaned = 0.00493609 Jy
! Component: 1550  -  total flux cleaned = 0.00507134 Jy
! Component: 1600  -  total flux cleaned = 0.00507137 Jy
! Component: 1650  -  total flux cleaned = 0.0052045 Jy
! Component: 1700  -  total flux cleaned = 0.00529212 Jy
! Component: 1750  -  total flux cleaned = 0.00533575 Jy
! Component: 1800  -  total flux cleaned = 0.00542174 Jy
! Component: 1850  -  total flux cleaned = 0.00552879 Jy
! Component: 1900  -  total flux cleaned = 0.00555008 Jy
! Component: 1950  -  total flux cleaned = 0.00554996 Jy
! Component: 2000  -  total flux cleaned = 0.00565415 Jy
! Component: 2050  -  total flux cleaned = 0.00571626 Jy
! Component: 2100  -  total flux cleaned = 0.00565474 Jy
! Component: 2150  -  total flux cleaned = 0.00577703 Jy
! Component: 2200  -  total flux cleaned = 0.00581734 Jy
! Component: 2250  -  total flux cleaned = 0.00591762 Jy
! Component: 2300  -  total flux cleaned = 0.00595745 Jy
! Component: 2350  -  total flux cleaned = 0.00597743 Jy
! Component: 2400  -  total flux cleaned = 0.00605599 Jy
! Component: 2450  -  total flux cleaned = 0.00609499 Jy
! Component: 2500  -  total flux cleaned = 0.00603712 Jy
! Component: 2550  -  total flux cleaned = 0.00615276 Jy
! Component: 2600  -  total flux cleaned = 0.00624812 Jy
! Component: 2650  -  total flux cleaned = 0.00624796 Jy
! Component: 2700  -  total flux cleaned = 0.00628557 Jy
! Component: 2750  -  total flux cleaned = 0.00637879 Jy
! Component: 2800  -  total flux cleaned = 0.00636028 Jy
! Component: 2850  -  total flux cleaned = 0.00636015 Jy
! Component: 2900  -  total flux cleaned = 0.00641524 Jy
! Component: 2950  -  total flux cleaned = 0.0064336 Jy
! Component: 3000  -  total flux cleaned = 0.00654195 Jy
! Component: 3050  -  total flux cleaned = 0.00659572 Jy
! Component: 3100  -  total flux cleaned = 0.00661358 Jy
! Component: 3150  -  total flux cleaned = 0.00661386 Jy
! Component: 3200  -  total flux cleaned = 0.006649 Jy
! Component: 3250  -  total flux cleaned = 0.0067363 Jy
! Component: 3300  -  total flux cleaned = 0.00675374 Jy
! Component: 3350  -  total flux cleaned = 0.00677117 Jy
! Component: 3400  -  total flux cleaned = 0.00680541 Jy
! Component: 3450  -  total flux cleaned = 0.00685664 Jy
! Component: 3500  -  total flux cleaned = 0.00699219 Jy
! Component: 3550  -  total flux cleaned = 0.00697529 Jy
! Component: 3600  -  total flux cleaned = 0.00697534 Jy
! Component: 3650  -  total flux cleaned = 0.00705843 Jy
! Component: 3700  -  total flux cleaned = 0.00707504 Jy
! Component: 3750  -  total flux cleaned = 0.00717356 Jy
! Component: 3800  -  total flux cleaned = 0.00722247 Jy
! Component: 3850  -  total flux cleaned = 0.0072386 Jy
! Component: 3900  -  total flux cleaned = 0.00730322 Jy
! Component: 3950  -  total flux cleaned = 0.00723899 Jy
! Component: 4000  -  total flux cleaned = 0.00735062 Jy
! Component: 4050  -  total flux cleaned = 0.00736654 Jy
! Total flux subtracted in 4096 components = 0.00744543 Jy
! Clean residual min=-0.000822 max=0.000835 Jy/beam
! Clean residual mean=-0.000004 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.245094 Jy
keep
! Adding 367 model components to the UV plane model.
! The established model now contains 596 components and 0.245094 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1404+6551_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.087 x 1.139 at 33.69 degrees (North through East)
! Clean map  min=-0.0013999  max=0.17883 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1404+6551_X_map.fits
wmodel /vlbi/uf001/uva//J1404+6551_X_map.mod
! Writing 596 model components to file: /vlbi/uf001/uva//J1404+6551_X_map.mod
wobs   /vlbi/uf001/uva//J1404+6551_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1404+6551_X_uvs.fits
wwins  /vlbi/uf001/uva//J1404+6551_X_map.win
! wwins: Wrote 10 windows to /vlbi/uf001/uva//J1404+6551_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.178835 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000294167 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.493473 0.493473 0.986946 1.97389 3.94778 7.89556 15.7911 31.5823 63.1645
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.178 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  607.936 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1404+6551_X_dfm.log closed on Mon Jan 14 02:44:29 2019