! Started logfile: /vlbi/uf001/uva//J1404+0728_S_dfm.log on Mon Jan 14 02:44:05 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1404+0728_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1404+0728_S_uva.fits
! AN table 1: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.991402 visibilities/baseline/integration-bin.
! Found source: J1404+0728
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4497 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1404+0728_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006873Jy  sigma=20.135167
! Fit after  self-cal, rms=0.833630Jy  sigma=16.632958
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.66 mas, bmaj=6.419 mas, bpa=-2.477 degrees
! Estimated noise=0.695777 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.130216 Jy
! Component: 100  -  total flux cleaned = 0.159617 Jy
! Total flux subtracted in 100 components = 0.159617 Jy
! Clean residual min=-0.007363 max=0.012546 Jy/beam
! Clean residual mean=0.000000 rms=0.002206 Jy/beam
! Combined flux in latest and established models = 0.159617 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.159617 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070750Jy  sigma=1.350238
! Fit after  self-cal, rms=0.070474Jy  sigma=1.346906
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.121 mas, bmaj=7.239 mas, bpa=-2.771 degrees
! Estimated noise=0.57778 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (20.5, -45.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0143374 Jy
! Component: 100  -  total flux cleaned = 0.0212851 Jy
! Component: 150  -  total flux cleaned = 0.0233407 Jy
! Component: 200  -  total flux cleaned = 0.0248881 Jy
! Total flux subtracted in 200 components = 0.0248881 Jy
! Clean residual min=-0.006620 max=0.009326 Jy/beam
! Clean residual mean=-0.000006 rms=0.001740 Jy/beam
! Combined flux in latest and established models = 0.184505 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 33 components and 0.184505 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067516Jy  sigma=1.282814
! Fit after  self-cal, rms=0.067351Jy  sigma=1.279088
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.121 x 7.239 at -2.771 degrees (North through East)
! Clean map  min=-0.0059667  max=0.16731 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     HN        0.97     KP        1.02     LA        0.91     
!   MK        1.10     NL        1.01     OV        0.94     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     HN        0.95     KP        1.01     LA        0.95     
!   MK        1.03     NL        1.03     OV        0.95     PT        0.94     
!   SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     HN        0.96     KP        1.02     LA        0.92     
!   MK        1.04     NL        1.02     OV        0.98     PT        0.96     
!   SC        0.96     
! 
! 
! Fit before self-cal, rms=0.067351Jy  sigma=1.279088
! Fit after  self-cal, rms=0.067311Jy  sigma=1.249100
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.145 mas, bmaj=7.329 mas, bpa=-2.295 degrees
! Estimated noise=0.57302 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00318607 Jy
! Component: 100  -  total flux cleaned = -0.00372724 Jy
! Component: 150  -  total flux cleaned = -0.00421332 Jy
! Component: 200  -  total flux cleaned = -0.00475763 Jy
! Total flux subtracted in 200 components = -0.00475763 Jy
! Clean residual min=-0.005299 max=0.005988 Jy/beam
! Clean residual mean=-0.000008 rms=0.001421 Jy/beam
! Combined flux in latest and established models = 0.179747 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 48 components and 0.179747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066710Jy  sigma=1.240312
! Fit after  self-cal, rms=0.066744Jy  sigma=1.239711
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066744Jy  sigma=1.239711
! Fit after  self-cal, rms=0.067526Jy  sigma=1.169487
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.136 mas, bmaj=7.314 mas, bpa=-2.585 degrees
! Estimated noise=0.576057 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00108506 Jy
! Component: 100  -  total flux cleaned = -0.000746441 Jy
! Component: 150  -  total flux cleaned = -0.000456204 Jy
! Component: 200  -  total flux cleaned = -0.000201096 Jy
! Total flux subtracted in 200 components = -0.000201096 Jy
! Clean residual min=-0.003450 max=0.003011 Jy/beam
! Clean residual mean=0.000004 rms=0.000731 Jy/beam
! Combined flux in latest and established models = 0.179546 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 69 components and 0.179546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067411Jy  sigma=1.166717
! Fit after  self-cal, rms=0.067474Jy  sigma=1.166311
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000163947 Jy
! Component: 100  -  total flux cleaned = 1.45837e-05 Jy
! Component: 150  -  total flux cleaned = 0.000175895 Jy
! Component: 200  -  total flux cleaned = 0.00028716 Jy
! Total flux subtracted in 200 components = 0.00028716 Jy
! Clean residual min=-0.003303 max=0.002995 Jy/beam
! Clean residual mean=0.000004 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 0.179833 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 87 components and 0.179833 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067430Jy  sigma=1.165155
! Fit after  self-cal, rms=0.067425Jy  sigma=1.165110
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067425Jy  sigma=1.165110
! Fit after  self-cal, rms=0.068586Jy  sigma=1.161412
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.131 mas, bmaj=7.313 mas, bpa=-2.673 degrees
! Estimated noise=0.575673 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000403133 Jy
! Component: 100  -  total flux cleaned = -0.000349947 Jy
! Component: 150  -  total flux cleaned = -9.58736e-05 Jy
! Component: 200  -  total flux cleaned = 0.000124513 Jy
! Total flux subtracted in 200 components = 0.000124513 Jy
! Clean residual min=-0.002850 max=0.002588 Jy/beam
! Clean residual mean=0.000002 rms=0.000640 Jy/beam
! Combined flux in latest and established models = 0.179958 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 102 components and 0.179958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068509Jy  sigma=1.159458
! Fit after  self-cal, rms=0.068518Jy  sigma=1.159287
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000124259 Jy
! Component: 100  -  total flux cleaned = 0.000132076 Jy
! Component: 150  -  total flux cleaned = 0.000247196 Jy
! Component: 200  -  total flux cleaned = 0.000354548 Jy
! Total flux subtracted in 200 components = 0.000354548 Jy
! Clean residual min=-0.002743 max=0.002554 Jy/beam
! Clean residual mean=0.000002 rms=0.000631 Jy/beam
! Combined flux in latest and established models = 0.180312 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 110 components and 0.180312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068493Jy  sigma=1.158690
! Fit after  self-cal, rms=0.068493Jy  sigma=1.158664
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068493Jy  sigma=1.158664
! Fit after  self-cal, rms=0.068829Jy  sigma=1.158226
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.759 mas, bmaj=11.49 mas, bpa=-5.333 degrees
! Estimated noise=0.74917 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000476149 Jy
! Component: 100  -  total flux cleaned = 0.00078034 Jy
! Component: 150  -  total flux cleaned = 0.000954188 Jy
! Component: 200  -  total flux cleaned = 0.00105534 Jy
! Total flux subtracted in 200 components = 0.00105534 Jy
! Clean residual min=-0.003204 max=0.003186 Jy/beam
! Clean residual mean=0.000002 rms=0.000786 Jy/beam
! Combined flux in latest and established models = 0.181367 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 118 components and 0.181367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068814Jy  sigma=1.157671
! Fit after  self-cal, rms=0.068816Jy  sigma=1.157612
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.86976e-06 Jy
! Component: 100  -  total flux cleaned = 9.15728e-05 Jy
! Component: 150  -  total flux cleaned = 0.000170991 Jy
! Component: 200  -  total flux cleaned = 0.000242142 Jy
! Total flux subtracted in 200 components = 0.000242142 Jy
! Clean residual min=-0.003228 max=0.003115 Jy/beam
! Clean residual mean=0.000002 rms=0.000781 Jy/beam
! Combined flux in latest and established models = 0.18161 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 125 components and 0.18161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068816Jy  sigma=1.157460
! Fit after  self-cal, rms=0.068815Jy  sigma=1.157442
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.127 mas, bmaj=7.313 mas, bpa=-2.705 degrees
! Estimated noise=0.574757 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.127 x 7.313 at -2.705 degrees (North through East)
! Clean map  min=-0.0028487  max=0.16724 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.671 mas, bmaj=6.51 mas, bpa=-2.879 degrees
! Estimated noise=0.694282 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.129892 Jy
! Component: 100  -  total flux cleaned = 0.159162 Jy
! Component: 150  -  total flux cleaned = 0.169706 Jy
! Component: 200  -  total flux cleaned = 0.175301 Jy
! Total flux subtracted in 200 components = 0.175301 Jy
! Clean residual min=-0.003661 max=0.003339 Jy/beam
! Clean residual mean=0.000002 rms=0.000866 Jy/beam
! Combined flux in latest and established models = 0.175301 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.175301 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.127 mas, bmaj=7.313 mas, bpa=-2.705 degrees
! Estimated noise=0.574757 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00288002 Jy
! Component: 100  -  total flux cleaned = 0.00411444 Jy
! Component: 150  -  total flux cleaned = 0.00462785 Jy
! Component: 200  -  total flux cleaned = 0.00474669 Jy
! Total flux subtracted in 200 components = 0.00474669 Jy
! Clean residual min=-0.002678 max=0.002472 Jy/beam
! Clean residual mean=0.000002 rms=0.000639 Jy/beam
! Combined flux in latest and established models = 0.180047 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 46 components and 0.180047 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.759 mas, bmaj=11.49 mas, bpa=-5.333 degrees
! Estimated noise=0.74917 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00117271 Jy
! Component: 100  -  total flux cleaned = 0.00142212 Jy
! Component: 150  -  total flux cleaned = 0.00142378 Jy
! Component: 200  -  total flux cleaned = 0.00139199 Jy
! Total flux subtracted in 200 components = 0.00139199 Jy
! Clean residual min=-0.003010 max=0.002817 Jy/beam
! Clean residual mean=0.000002 rms=0.000780 Jy/beam
! Combined flux in latest and established models = 0.181439 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.79994e-05 Jy
! Component: 100  -  total flux cleaned = -0.000109613 Jy
! Component: 150  -  total flux cleaned = -0.000133549 Jy
! Component: 200  -  total flux cleaned = -0.000176068 Jy
! Total flux subtracted in 200 components = -0.000176068 Jy
! Clean residual min=-0.003049 max=0.002868 Jy/beam
! Clean residual mean=0.000002 rms=0.000773 Jy/beam
! Combined flux in latest and established models = 0.181263 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 63 components and 0.181263 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.127 mas, bmaj=7.313 mas, bpa=-2.705 degrees
! Estimated noise=0.574757 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.26965e-05 Jy
! Component: 100  -  total flux cleaned = 2.13486e-05 Jy
! Component: 150  -  total flux cleaned = -8.95557e-05 Jy
! Component: 200  -  total flux cleaned = -0.000123582 Jy
! Total flux subtracted in 200 components = -0.000123582 Jy
! Clean residual min=-0.002567 max=0.002466 Jy/beam
! Clean residual mean=0.000001 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.181139 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 78 components and 0.181139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068922Jy  sigma=1.158211
! Fit after  self-cal, rms=0.068906Jy  sigma=1.158007
wmodel J1404+0728_S_map.mod
! Writing 78 model components to file: J1404+0728_S_map.mod
wobs   J1404+0728_S_uvs.fits
! Writing UV FITS file: J1404+0728_S_uvs.fits
wwins  J1404+0728_S_map.win
! wwins: Wrote 2 windows to J1404+0728_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000513446 Jy
! Component: 100  -  total flux cleaned = -0.00081719 Jy
! Component: 150  -  total flux cleaned = -0.000776944 Jy
! Component: 200  -  total flux cleaned = -0.000738684 Jy
! Component: 250  -  total flux cleaned = -0.000663305 Jy
! Component: 300  -  total flux cleaned = -0.000626732 Jy
! Component: 350  -  total flux cleaned = -0.000591284 Jy
! Component: 400  -  total flux cleaned = -0.000556629 Jy
! Component: 450  -  total flux cleaned = -0.000658185 Jy
! Component: 500  -  total flux cleaned = -0.000725034 Jy
! Component: 550  -  total flux cleaned = -0.000855383 Jy
! Component: 600  -  total flux cleaned = -0.000918915 Jy
! Component: 650  -  total flux cleaned = -0.00091884 Jy
! Component: 700  -  total flux cleaned = -0.000949793 Jy
! Component: 750  -  total flux cleaned = -0.00101095 Jy
! Component: 800  -  total flux cleaned = -0.00104017 Jy
! Component: 850  -  total flux cleaned = -0.00103991 Jy
! Component: 900  -  total flux cleaned = -0.00106847 Jy
! Component: 950  -  total flux cleaned = -0.00106774 Jy
! Component: 1000  -  total flux cleaned = -0.000983104 Jy
! Component: 1050  -  total flux cleaned = -0.000983081 Jy
! Component: 1100  -  total flux cleaned = -0.000955369 Jy
! Component: 1150  -  total flux cleaned = -0.000874854 Jy
! Component: 1200  -  total flux cleaned = -0.000901284 Jy
! Component: 1250  -  total flux cleaned = -0.000848913 Jy
! Component: 1300  -  total flux cleaned = -0.000797403 Jy
! Component: 1350  -  total flux cleaned = -0.000848886 Jy
! Component: 1400  -  total flux cleaned = -0.00087383 Jy
! Component: 1450  -  total flux cleaned = -0.000898997 Jy
! Component: 1500  -  total flux cleaned = -0.000948504 Jy
! Component: 1550  -  total flux cleaned = -0.000997363 Jy
! Component: 1600  -  total flux cleaned = -0.00106988 Jy
! Component: 1650  -  total flux cleaned = -0.00109392 Jy
! Component: 1700  -  total flux cleaned = -0.0011646 Jy
! Component: 1750  -  total flux cleaned = -0.0011881 Jy
! Component: 1800  -  total flux cleaned = -0.00116505 Jy
! Component: 1850  -  total flux cleaned = -0.00118797 Jy
! Component: 1900  -  total flux cleaned = -0.00123331 Jy
! Component: 1950  -  total flux cleaned = -0.00118792 Jy
! Component: 2000  -  total flux cleaned = -0.00118736 Jy
! Component: 2050  -  total flux cleaned = -0.00114319 Jy
! Component: 2100  -  total flux cleaned = -0.00114305 Jy
! Component: 2150  -  total flux cleaned = -0.00112148 Jy
! Component: 2200  -  total flux cleaned = -0.0011859 Jy
! Component: 2250  -  total flux cleaned = -0.00114318 Jy
! Component: 2300  -  total flux cleaned = -0.00118504 Jy
! Component: 2350  -  total flux cleaned = -0.00122689 Jy
! Component: 2400  -  total flux cleaned = -0.0011018 Jy
! Component: 2450  -  total flux cleaned = -0.00112257 Jy
! Component: 2500  -  total flux cleaned = -0.00112265 Jy
! Component: 2550  -  total flux cleaned = -0.00116331 Jy
! Component: 2600  -  total flux cleaned = -0.00112277 Jy
! Component: 2650  -  total flux cleaned = -0.00112287 Jy
! Component: 2700  -  total flux cleaned = -0.00118237 Jy
! Component: 2750  -  total flux cleaned = -0.001064 Jy
! Component: 2800  -  total flux cleaned = -0.00108367 Jy
! Component: 2850  -  total flux cleaned = -0.00104506 Jy
! Component: 2900  -  total flux cleaned = -0.00106425 Jy
! Component: 2950  -  total flux cleaned = -0.00104517 Jy
! Component: 3000  -  total flux cleaned = -0.00100734 Jy
! Component: 3050  -  total flux cleaned = -0.00100735 Jy
! Component: 3100  -  total flux cleaned = -0.00104476 Jy
! Component: 3150  -  total flux cleaned = -0.000989231 Jy
! Component: 3200  -  total flux cleaned = -0.000952494 Jy
! Component: 3250  -  total flux cleaned = -0.000970783 Jy
! Component: 3300  -  total flux cleaned = -0.000952561 Jy
! Component: 3350  -  total flux cleaned = -0.000988593 Jy
! Component: 3400  -  total flux cleaned = -0.000988536 Jy
! Component: 3450  -  total flux cleaned = -0.00105961 Jy
! Component: 3500  -  total flux cleaned = -0.00102417 Jy
! Component: 3550  -  total flux cleaned = -0.00107697 Jy
! Component: 3600  -  total flux cleaned = -0.00112944 Jy
! Component: 3650  -  total flux cleaned = -0.00112951 Jy
! Component: 3700  -  total flux cleaned = -0.0012155 Jy
! Component: 3750  -  total flux cleaned = -0.00123254 Jy
! Component: 3800  -  total flux cleaned = -0.00123255 Jy
! Component: 3850  -  total flux cleaned = -0.00123239 Jy
! Component: 3900  -  total flux cleaned = -0.00126617 Jy
! Component: 3950  -  total flux cleaned = -0.00129961 Jy
! Component: 4000  -  total flux cleaned = -0.00131622 Jy
! Component: 4050  -  total flux cleaned = -0.0013328 Jy
! Total flux subtracted in 4096 components = -0.00134933 Jy
! Clean residual min=-0.000973 max=0.000957 Jy/beam
! Clean residual mean=0.000001 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.17979 Jy
keep
! Adding 293 model components to the UV plane model.
! The established model now contains 371 components and 0.17979 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1404+0728_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.127 x 7.313 at -2.705 degrees (North through East)
! Clean map  min=-0.0022128  max=0.16715 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1404+0728_S_map.fits
wmodel /vlbi/uf001/uva//J1404+0728_S_map.mod
! Writing 371 model components to file: /vlbi/uf001/uva//J1404+0728_S_map.mod
wobs   /vlbi/uf001/uva//J1404+0728_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1404+0728_S_uvs.fits
wwins  /vlbi/uf001/uva//J1404+0728_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J1404+0728_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.167148 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000289927 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.520365 0.520365 1.04073 2.08146 4.16292 8.32584 16.6517 33.3033 66.6067
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.167 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  576.518 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1404+0728_S_dfm.log closed on Mon Jan 14 02:44:09 2019