! Started logfile: /vlbi/uf001/uva//J1402-1840_S_dfm.log on Mon Jan 14 02:43:31 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1402-1840_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1402-1840_S_uva.fits ! AN table 1: 48 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.799537 visibilities/baseline/integration-bin. ! Found source: J1402-1840 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 5181 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1402-1840_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.056559Jy sigma=16.996080 ! Fit after self-cal, rms=0.724977Jy sigma=11.527146 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=6.347 mas, bpa=0.5125 degrees ! Estimated noise=1.00332 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.216503 Jy ! Component: 100 - total flux cleaned = 0.265237 Jy ! Total flux subtracted in 100 components = 0.265237 Jy ! Clean residual min=-0.009659 max=0.016502 Jy/beam ! Clean residual mean=0.000002 rms=0.002917 Jy/beam ! Combined flux in latest and established models = 0.265237 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.265237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087976Jy sigma=1.360267 ! Fit after self-cal, rms=0.087973Jy sigma=1.360213 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.617 mas, bmaj=7.51 mas, bpa=0.9392 degrees ! Estimated noise=0.620303 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201073 Jy ! Component: 100 - total flux cleaned = 0.0278425 Jy ! Component: 150 - total flux cleaned = 0.0318119 Jy ! Component: 200 - total flux cleaned = 0.034042 Jy ! Total flux subtracted in 200 components = 0.034042 Jy ! Clean residual min=-0.008511 max=0.008505 Jy/beam ! Clean residual mean=-0.000002 rms=0.002343 Jy/beam ! Combined flux in latest and established models = 0.299279 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 31 components and 0.299279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.084925Jy sigma=1.278619 ! Fit after self-cal, rms=0.084943Jy sigma=1.278506 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.617 x 7.51 at 0.9392 degrees (North through East) ! Clean map min=-0.0083358 max=0.28071 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.95 HN 1.11 KP 1.03 ! LA 0.91 MK 1.06 NL 0.97 OV 0.97 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.94 HN 1.09 KP 0.99 ! LA 0.91 MK 1.04 NL 1.04 OV 0.99 ! PT 1.07 SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.95 HN 1.12 KP 1.02 ! LA 0.93 MK 0.96 NL 1.04 OV 0.98 ! PT 1.08 SC 0.99 ! ! ! Fit before self-cal, rms=0.084943Jy sigma=1.278506 ! Fit after self-cal, rms=0.083092Jy sigma=1.231369 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.64 mas, bmaj=7.539 mas, bpa=1.919 degrees ! Estimated noise=0.616943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00496514 Jy ! Component: 100 - total flux cleaned = -0.00542543 Jy ! Component: 150 - total flux cleaned = -0.00559154 Jy ! Component: 200 - total flux cleaned = -0.00566186 Jy ! Total flux subtracted in 200 components = -0.00566186 Jy ! Clean residual min=-0.006394 max=0.006842 Jy/beam ! Clean residual mean=0.000002 rms=0.001689 Jy/beam ! Combined flux in latest and established models = 0.293617 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.293617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.082682Jy sigma=1.226766 ! Fit after self-cal, rms=0.082744Jy sigma=1.226594 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.082744Jy sigma=1.226594 ! Fit after self-cal, rms=0.083296Jy sigma=1.178370 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.618 mas, bmaj=7.552 mas, bpa=1.525 degrees ! Estimated noise=0.615487 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000316725 Jy ! Component: 100 - total flux cleaned = 0.000315367 Jy ! Component: 150 - total flux cleaned = 0.000316875 Jy ! Component: 200 - total flux cleaned = 0.000368811 Jy ! Total flux subtracted in 200 components = 0.000368811 Jy ! Clean residual min=-0.002832 max=0.003450 Jy/beam ! Clean residual mean=-0.000003 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.293986 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.293986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083272Jy sigma=1.177946 ! Fit after self-cal, rms=0.083381Jy sigma=1.177742 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, 17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266516 Jy ! Component: 100 - total flux cleaned = 0.00295881 Jy ! Component: 150 - total flux cleaned = 0.00300699 Jy ! Component: 200 - total flux cleaned = 0.00301005 Jy ! Total flux subtracted in 200 components = 0.00301005 Jy ! Clean residual min=-0.002601 max=0.002563 Jy/beam ! Clean residual mean=-0.000003 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.296996 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 63 components and 0.296996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083266Jy sigma=1.175789 ! Fit after self-cal, rms=0.083255Jy sigma=1.175656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083255Jy sigma=1.175656 ! Fit after self-cal, rms=0.083329Jy sigma=1.175503 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.614 mas, bmaj=7.539 mas, bpa=1.427 degrees ! Estimated noise=0.615416 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00080419 Jy ! Component: 100 - total flux cleaned = 0.000731196 Jy ! Component: 150 - total flux cleaned = 0.00059539 Jy ! Component: 200 - total flux cleaned = 0.000470736 Jy ! Total flux subtracted in 200 components = 0.000470736 Jy ! Clean residual min=-0.002541 max=0.002413 Jy/beam ! Clean residual mean=-0.000002 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.297467 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 72 components and 0.297467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083290Jy sigma=1.174980 ! Fit after self-cal, rms=0.083286Jy sigma=1.174942 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.88526e-05 Jy ! Component: 100 - total flux cleaned = 2.11014e-06 Jy ! Component: 150 - total flux cleaned = -0.000129056 Jy ! Component: 200 - total flux cleaned = -0.000224635 Jy ! Total flux subtracted in 200 components = -0.000224635 Jy ! Clean residual min=-0.002503 max=0.002336 Jy/beam ! Clean residual mean=-0.000002 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.297242 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 77 components and 0.297242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083266Jy sigma=1.174695 ! Fit after self-cal, rms=0.083265Jy sigma=1.174679 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083265Jy sigma=1.174679 ! Fit after self-cal, rms=0.083295Jy sigma=1.174614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.563 mas, bmaj=14.85 mas, bpa=3.982 degrees ! Estimated noise=0.745395 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.51767e-05 Jy ! Component: 100 - total flux cleaned = -0.000213954 Jy ! Component: 150 - total flux cleaned = -0.000329268 Jy ! Component: 200 - total flux cleaned = -0.000366767 Jy ! Total flux subtracted in 200 components = -0.000366767 Jy ! Clean residual min=-0.002189 max=0.003122 Jy/beam ! Clean residual mean=-0.000005 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.296876 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 91 components and 0.296876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083287Jy sigma=1.174519 ! Fit after self-cal, rms=0.083287Jy sigma=1.174500 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-47.5, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00242671 Jy ! Component: 100 - total flux cleaned = 0.00290328 Jy ! Component: 150 - total flux cleaned = 0.00308378 Jy ! Component: 200 - total flux cleaned = 0.00301156 Jy ! Total flux subtracted in 200 components = 0.00301156 Jy ! Clean residual min=-0.001918 max=0.001741 Jy/beam ! Clean residual mean=0.000000 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.299887 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 128 components and 0.299887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083218Jy sigma=1.173188 ! Fit after self-cal, rms=0.083208Jy sigma=1.173079 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.613 mas, bmaj=7.537 mas, bpa=1.368 degrees ! Estimated noise=0.615003 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.613 x 7.537 at 1.368 degrees (North through East) ! Clean map min=-0.0022879 max=0.28185 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=6.376 mas, bpa=1.063 degrees ! Estimated noise=0.995382 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.214742 Jy ! Component: 100 - total flux cleaned = 0.262476 Jy ! Component: 150 - total flux cleaned = 0.278321 Jy ! Component: 200 - total flux cleaned = 0.286063 Jy ! Total flux subtracted in 200 components = 0.286063 Jy ! Clean residual min=-0.005920 max=0.004823 Jy/beam ! Clean residual mean=0.000001 rms=0.001287 Jy/beam ! Combined flux in latest and established models = 0.286063 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.286063 Jy ! Inverting map and beam ! Estimated beam: bmin=3.613 mas, bmaj=7.537 mas, bpa=1.368 degrees ! Estimated noise=0.615003 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00683547 Jy ! Component: 100 - total flux cleaned = 0.0103159 Jy ! Component: 150 - total flux cleaned = 0.0121174 Jy ! Component: 200 - total flux cleaned = 0.0128152 Jy ! Total flux subtracted in 200 components = 0.0128152 Jy ! Clean residual min=-0.002542 max=0.002308 Jy/beam ! Clean residual mean=0.000000 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.298878 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 60 components and 0.298878 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.563 mas, bmaj=14.85 mas, bpa=3.982 degrees ! Estimated noise=0.745395 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141133 Jy ! Component: 100 - total flux cleaned = 0.00205383 Jy ! Component: 150 - total flux cleaned = 0.00218618 Jy ! Component: 200 - total flux cleaned = 0.00218352 Jy ! Total flux subtracted in 200 components = 0.00218352 Jy ! Clean residual min=-0.001838 max=0.001841 Jy/beam ! Clean residual mean=0.000001 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.301062 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000100116 Jy ! Component: 100 - total flux cleaned = -0.000193164 Jy ! Component: 150 - total flux cleaned = -0.000222551 Jy ! Component: 200 - total flux cleaned = -0.000333416 Jy ! Total flux subtracted in 200 components = -0.000333416 Jy ! Clean residual min=-0.001782 max=0.001784 Jy/beam ! Clean residual mean=0.000001 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.300728 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 111 components and 0.300728 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.613 mas, bmaj=7.537 mas, bpa=1.368 degrees ! Estimated noise=0.615003 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000227657 Jy ! Component: 100 - total flux cleaned = -0.000729076 Jy ! Component: 150 - total flux cleaned = -0.000929121 Jy ! Component: 200 - total flux cleaned = -0.00116361 Jy ! Total flux subtracted in 200 components = -0.00116361 Jy ! Clean residual min=-0.002059 max=0.001997 Jy/beam ! Clean residual mean=0.000001 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.299565 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 136 components and 0.299565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083153Jy sigma=1.172779 ! Fit after self-cal, rms=0.083147Jy sigma=1.172644 wmodel J1402-1840_S_map.mod ! Writing 136 model components to file: J1402-1840_S_map.mod wobs J1402-1840_S_uvs.fits ! Writing UV FITS file: J1402-1840_S_uvs.fits wwins J1402-1840_S_map.win ! wwins: Wrote 3 windows to J1402-1840_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000687303 Jy ! Component: 100 - total flux cleaned = -0.000929501 Jy ! Component: 150 - total flux cleaned = -0.00102836 Jy ! Component: 200 - total flux cleaned = -0.00112279 Jy ! Component: 250 - total flux cleaned = -0.0012448 Jy ! Component: 300 - total flux cleaned = -0.00147975 Jy ! Component: 350 - total flux cleaned = -0.00153642 Jy ! Component: 400 - total flux cleaned = -0.00164733 Jy ! Component: 450 - total flux cleaned = -0.00164677 Jy ! Component: 500 - total flux cleaned = -0.00167276 Jy ! Component: 550 - total flux cleaned = -0.00172397 Jy ! Component: 600 - total flux cleaned = -0.00182502 Jy ! Component: 650 - total flux cleaned = -0.0018994 Jy ! Component: 700 - total flux cleaned = -0.00192339 Jy ! Component: 750 - total flux cleaned = -0.00189941 Jy ! Component: 800 - total flux cleaned = -0.00189922 Jy ! Component: 850 - total flux cleaned = -0.00183048 Jy ! Component: 900 - total flux cleaned = -0.00183018 Jy ! Component: 950 - total flux cleaned = -0.00167515 Jy ! Component: 1000 - total flux cleaned = -0.00174056 Jy ! Component: 1050 - total flux cleaned = -0.00165395 Jy ! Component: 1100 - total flux cleaned = -0.0015482 Jy ! Component: 1150 - total flux cleaned = -0.00156946 Jy ! Component: 1200 - total flux cleaned = -0.00169217 Jy ! Component: 1250 - total flux cleaned = -0.00157065 Jy ! Component: 1300 - total flux cleaned = -0.00161096 Jy ! Component: 1350 - total flux cleaned = -0.00165035 Jy ! Component: 1400 - total flux cleaned = -0.00168891 Jy ! Component: 1450 - total flux cleaned = -0.00167 Jy ! Component: 1500 - total flux cleaned = -0.00170766 Jy ! Component: 1550 - total flux cleaned = -0.00165183 Jy ! Component: 1600 - total flux cleaned = -0.00163373 Jy ! Component: 1650 - total flux cleaned = -0.00156102 Jy ! Component: 1700 - total flux cleaned = -0.00159708 Jy ! Component: 1750 - total flux cleaned = -0.0015436 Jy ! Component: 1800 - total flux cleaned = -0.00154357 Jy ! Component: 1850 - total flux cleaned = -0.00145647 Jy ! Component: 1900 - total flux cleaned = -0.00143948 Jy ! Component: 1950 - total flux cleaned = -0.00142263 Jy ! Component: 2000 - total flux cleaned = -0.00140574 Jy ! Component: 2050 - total flux cleaned = -0.00135547 Jy ! Component: 2100 - total flux cleaned = -0.00127308 Jy ! Component: 2150 - total flux cleaned = -0.00122387 Jy ! Component: 2200 - total flux cleaned = -0.00117525 Jy ! Component: 2250 - total flux cleaned = -0.00107889 Jy ! Component: 2300 - total flux cleaned = -0.00106311 Jy ! Component: 2350 - total flux cleaned = -0.0010786 Jy ! Component: 2400 - total flux cleaned = -0.00100037 Jy ! Component: 2450 - total flux cleaned = -0.00104675 Jy ! Component: 2500 - total flux cleaned = -0.00103116 Jy ! Component: 2550 - total flux cleaned = -0.00101571 Jy ! Component: 2600 - total flux cleaned = -0.000925298 Jy ! Component: 2650 - total flux cleaned = -0.000940369 Jy ! Component: 2700 - total flux cleaned = -0.00098499 Jy ! Component: 2750 - total flux cleaned = -0.000940973 Jy ! Component: 2800 - total flux cleaned = -0.000970184 Jy ! Component: 2850 - total flux cleaned = -0.000941449 Jy ! Component: 2900 - total flux cleaned = -0.000998708 Jy ! Component: 2950 - total flux cleaned = -0.000941899 Jy ! Component: 3000 - total flux cleaned = -0.000885436 Jy ! Component: 3050 - total flux cleaned = -0.000885633 Jy ! Component: 3100 - total flux cleaned = -0.000913388 Jy ! Component: 3150 - total flux cleaned = -0.000940932 Jy ! Component: 3200 - total flux cleaned = -0.000927112 Jy ! Component: 3250 - total flux cleaned = -0.000886396 Jy ! Component: 3300 - total flux cleaned = -0.000926857 Jy ! Component: 3350 - total flux cleaned = -0.000886657 Jy ! Component: 3400 - total flux cleaned = -0.000873225 Jy ! Component: 3450 - total flux cleaned = -0.000859944 Jy ! Component: 3500 - total flux cleaned = -0.000833565 Jy ! Component: 3550 - total flux cleaned = -0.000846729 Jy ! Component: 3600 - total flux cleaned = -0.000898628 Jy ! Component: 3650 - total flux cleaned = -0.000924431 Jy ! Component: 3700 - total flux cleaned = -0.00092453 Jy ! Component: 3750 - total flux cleaned = -0.000988093 Jy ! Component: 3800 - total flux cleaned = -0.0010135 Jy ! Component: 3850 - total flux cleaned = -0.00102602 Jy ! Component: 3900 - total flux cleaned = -0.00110097 Jy ! Component: 3950 - total flux cleaned = -0.00107626 Jy ! Component: 4000 - total flux cleaned = -0.00117497 Jy ! Component: 4050 - total flux cleaned = -0.001224 Jy ! Total flux subtracted in 4096 components = -0.00121181 Jy ! Clean residual min=-0.000704 max=0.000761 Jy/beam ! Clean residual mean=0.000002 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.298353 Jy keep ! Adding 244 model components to the UV plane model. ! The established model now contains 380 components and 0.298353 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1402-1840_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.613 x 7.537 at 1.368 degrees (North through East) ! Clean map min=-0.001714 max=0.27905 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1402-1840_S_map.fits wmodel /vlbi/uf001/uva//J1402-1840_S_map.mod ! Writing 380 model components to file: /vlbi/uf001/uva//J1402-1840_S_map.mod wobs /vlbi/uf001/uva//J1402-1840_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1402-1840_S_uvs.fits wwins /vlbi/uf001/uva//J1402-1840_S_map.win ! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1402-1840_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.279046 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000207073 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.222622 0.222622 0.445244 0.890489 1.78098 3.56196 7.12391 14.2478 28.4956 56.9913 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.279 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1347.57 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1402-1840_S_dfm.log closed on Mon Jan 14 02:43:35 2019