! Started logfile: /vlbi/uf001/uva//J1357+4353_X_dfm.log on Mon Jan 14 02:40:34 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1357+4353_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1357+4353_X_uva.fits ! AN table 1: 19 integrations on 36 of 36 possible baselines. ! AN table 2: 38 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.990741 visibilities/baseline/integration-bin. ! Found source: J1357+4353 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 24396 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1357+4353_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.009750Jy sigma=24.984156 ! Fit after self-cal, rms=0.933244Jy sigma=23.063387 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.694 mas, bmaj=1.241 mas, bpa=-6.805 degrees ! Estimated noise=0.354273 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0413073 Jy ! Component: 100 - total flux cleaned = 0.0625597 Jy ! Total flux subtracted in 100 components = 0.0625597 Jy ! Clean residual min=-0.008804 max=0.018678 Jy/beam ! Clean residual mean=0.000049 rms=0.002406 Jy/beam ! Combined flux in latest and established models = 0.0625597 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0625597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103417Jy sigma=2.489764 ! Fit after self-cal, rms=0.101659Jy sigma=2.449495 ! Inverting map ! Added new window around map position (1.2, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210184 Jy ! Component: 100 - total flux cleaned = 0.0356084 Jy ! Total flux subtracted in 100 components = 0.0356084 Jy ! Clean residual min=-0.008399 max=0.016699 Jy/beam ! Clean residual mean=0.000041 rms=0.002160 Jy/beam ! Combined flux in latest and established models = 0.0981681 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 0.0981681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091885Jy sigma=2.205766 ! Fit after self-cal, rms=0.090926Jy sigma=2.183584 ! Inverting map ! Added new window around map position (-9.2, 5.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0194403 Jy ! Component: 100 - total flux cleaned = 0.0336518 Jy ! Total flux subtracted in 100 components = 0.0336518 Jy ! Clean residual min=-0.008398 max=0.013345 Jy/beam ! Clean residual mean=0.000035 rms=0.001859 Jy/beam ! Combined flux in latest and established models = 0.13182 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 31 components and 0.13182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082650Jy sigma=1.969968 ! Fit after self-cal, rms=0.081662Jy sigma=1.945651 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162342 Jy ! Component: 100 - total flux cleaned = 0.0284737 Jy ! Total flux subtracted in 100 components = 0.0284737 Jy ! Clean residual min=-0.006922 max=0.012045 Jy/beam ! Clean residual mean=0.000031 rms=0.001572 Jy/beam ! Combined flux in latest and established models = 0.160293 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 35 components and 0.160293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075081Jy sigma=1.777062 ! Fit after self-cal, rms=0.074576Jy sigma=1.765136 ! Inverting map ! Added new window around map position (-8.4, 6.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130872 Jy ! Component: 100 - total flux cleaned = 0.0229332 Jy ! Total flux subtracted in 100 components = 0.0229332 Jy ! Clean residual min=-0.005785 max=0.011593 Jy/beam ! Clean residual mean=0.000027 rms=0.001345 Jy/beam ! Combined flux in latest and established models = 0.183227 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 46 components and 0.183227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069858Jy sigma=1.646837 ! Fit after self-cal, rms=0.069525Jy sigma=1.637963 ! Inverting map ! Added new window around map position (-1.2, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118729 Jy ! Component: 100 - total flux cleaned = 0.0205444 Jy ! Total flux subtracted in 100 components = 0.0205444 Jy ! Clean residual min=-0.004732 max=0.005764 Jy/beam ! Clean residual mean=0.000023 rms=0.001125 Jy/beam ! Combined flux in latest and established models = 0.203771 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 0.203771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065646Jy sigma=1.542897 ! Fit after self-cal, rms=0.065451Jy sigma=1.537996 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00901607 Jy ! Component: 100 - total flux cleaned = 0.0160366 Jy ! Total flux subtracted in 100 components = 0.0160366 Jy ! Clean residual min=-0.004289 max=0.005690 Jy/beam ! Clean residual mean=0.000020 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.219808 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 0.219808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062964Jy sigma=1.477036 ! Fit after self-cal, rms=0.062832Jy sigma=1.473956 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00727866 Jy ! Component: 100 - total flux cleaned = 0.013017 Jy ! Total flux subtracted in 100 components = 0.013017 Jy ! Clean residual min=-0.004121 max=0.005942 Jy/beam ! Clean residual mean=0.000017 rms=0.000938 Jy/beam ! Combined flux in latest and established models = 0.232825 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 72 components and 0.232825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061169Jy sigma=1.433515 ! Fit after self-cal, rms=0.061073Jy sigma=1.431470 ! Inverting map ! Added new window around map position (2.4, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00560362 Jy ! Component: 100 - total flux cleaned = 0.00996723 Jy ! Total flux subtracted in 100 components = 0.00996723 Jy ! Clean residual min=-0.003801 max=0.004689 Jy/beam ! Clean residual mean=0.000015 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.242792 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 79 components and 0.242792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059883Jy sigma=1.402317 ! Fit after self-cal, rms=0.059809Jy sigma=1.400842 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8866 mas, bmaj=1.528 mas, bpa=-4.938 degrees ! Estimated noise=0.191903 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.6, 7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00903266 Jy ! Component: 100 - total flux cleaned = 0.0162027 Jy ! Component: 150 - total flux cleaned = 0.0221317 Jy ! Component: 200 - total flux cleaned = 0.0271455 Jy ! Total flux subtracted in 200 components = 0.0271455 Jy ! Clean residual min=-0.003620 max=0.005166 Jy/beam ! Clean residual mean=0.000033 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.269937 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 101 components and 0.269937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057593Jy sigma=1.345488 ! Fit after self-cal, rms=0.057417Jy sigma=1.341837 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8866 x 1.528 at -4.938 degrees (North through East) ! Clean map min=-0.0034038 max=0.053024 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.03 KP 0.93 LA 0.95 ! MK 1.02 NL 1.14 OV 0.94 PT 0.90 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 HN 1.00 KP 1.00 LA 0.95 ! MK 1.03 NL 1.08 OV 0.96 PT 0.87 ! SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 HN 0.99 KP 0.93 LA 0.97 ! MK 1.07 NL 1.05 OV 0.94 PT 0.88 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 HN 1.02 KP 1.00 LA 0.96 ! MK 1.10 NL 1.04 OV 0.94 PT 0.90 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 HN 0.99 KP 0.96 LA 0.97 ! MK 1.13 NL 1.13 OV 0.97 PT 0.84 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 HN 0.98 KP 1.05 LA 0.94 ! MK 0.94 NL 1.12 OV 0.95 PT 0.87 ! SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 HN 0.90 KP 0.90 LA 0.94 ! MK 1.01 NL 1.18 OV 0.91 PT 0.93 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 HN 0.95 KP 1.00 LA 0.99 ! MK 0.93 NL 1.12 OV 0.94 PT 0.88 ! SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! FD 1.06 HN 1.05 KP 0.93 LA 0.95 ! MK 1.07 NL 1.09 OV 0.90 PT 0.90 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.12 HN 0.99 KP 1.02 LA 0.98 ! MK 0.95 NL 1.06 OV 0.94 PT 0.89 ! SC 0.95 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 HN 0.92 KP 0.93 LA 0.95 ! MK 1.00 NL 1.14 OV 0.94 PT 0.91 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.11 HN 1.01 KP 1.01 LA 0.97 ! MK 0.85 NL 1.12 OV 0.93 PT 0.87 ! SC 1.11 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 0.91 KP 0.96 LA 1.00 ! MK 1.00 NL 1.15 OV 0.93 PT 0.90 ! SC 1.09 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 HN 0.98 KP 0.98 LA 1.01 ! MK 1.00 NL 1.08 OV 0.99 PT 0.90 ! SC 0.89 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 HN 0.97 KP 0.99 LA 0.96 ! MK 0.99 NL 1.14 OV 0.94 PT 0.86 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 HN 0.95 KP 1.03 LA 0.98 ! MK 1.03 NL 1.11 OV 0.96 PT 0.92 ! SC 0.81 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.00 KP 0.93 LA 1.00 ! MK 1.15 NL 1.07 OV 0.94 PT 0.92 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 HN 0.98 KP 1.02 LA 0.97 ! MK 0.92 NL 1.11 OV 0.98 PT 0.90 ! SC 0.86 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.02 KP 0.95 LA 0.94 ! MK 1.24 NL 1.12 OV 0.96 PT 0.90 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 HN 0.96 KP 1.05 LA 0.95 ! MK 1.00 NL 1.10 OV 0.95 PT 0.93 ! SC 0.79 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! FD 1.07 HN 1.01 KP 0.99 LA 0.96 ! MK 1.10 NL 1.13 OV 0.91 PT 0.92 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 HN 1.02 KP 1.05 LA 0.97 ! MK 0.87 NL 1.09 OV 0.98 PT 0.91 ! SC 0.84 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.07 KP 0.99 LA 0.92 ! MK 1.06 NL 1.13 OV 0.87 PT 0.94 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 HN 0.96 KP 1.03 LA 0.96 ! MK 0.83 NL 1.12 OV 0.98 PT 0.92 ! SC 1.04 ! ! ! Fit before self-cal, rms=0.057417Jy sigma=1.341837 ! Fit after self-cal, rms=0.054986Jy sigma=1.307718 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8774 mas, bmaj=1.543 mas, bpa=-5.763 degrees ! Estimated noise=0.187584 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000894342 Jy ! Component: 100 - total flux cleaned = 0.000253579 Jy ! Component: 150 - total flux cleaned = 0.000577625 Jy ! Component: 200 - total flux cleaned = 0.000861717 Jy ! Total flux subtracted in 200 components = 0.000861717 Jy ! Clean residual min=-0.002091 max=0.002874 Jy/beam ! Clean residual mean=-0.000001 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.270799 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 111 components and 0.270799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054645Jy sigma=1.298292 ! Fit after self-cal, rms=0.054611Jy sigma=1.296476 ! Inverting map ! Added new window around map position (-10.4, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194715 Jy ! Component: 100 - total flux cleaned = 0.00326921 Jy ! Component: 150 - total flux cleaned = 0.00368866 Jy ! Component: 200 - total flux cleaned = 0.00393721 Jy ! Total flux subtracted in 200 components = 0.00393721 Jy ! Clean residual min=-0.001853 max=0.001728 Jy/beam ! Clean residual mean=-0.000001 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.274736 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 127 components and 0.274736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054389Jy sigma=1.290530 ! Fit after self-cal, rms=0.054356Jy sigma=1.289956 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054356Jy sigma=1.289956 ! Fit after self-cal, rms=0.053613Jy sigma=1.286119 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8688 mas, bmaj=1.546 mas, bpa=-6.302 degrees ! Estimated noise=0.184496 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.00613e-06 Jy ! Component: 100 - total flux cleaned = 0.000352145 Jy ! Component: 150 - total flux cleaned = 0.000509171 Jy ! Component: 200 - total flux cleaned = 0.000558037 Jy ! Total flux subtracted in 200 components = 0.000558037 Jy ! Clean residual min=-0.001582 max=0.001365 Jy/beam ! Clean residual mean=0.000000 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.275294 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 135 components and 0.275294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053501Jy sigma=1.282917 ! Fit after self-cal, rms=0.053495Jy sigma=1.282604 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00025133 Jy ! Component: 100 - total flux cleaned = 0.000296403 Jy ! Component: 150 - total flux cleaned = 0.000424498 Jy ! Component: 200 - total flux cleaned = 0.000546467 Jy ! Total flux subtracted in 200 components = 0.000546467 Jy ! Clean residual min=-0.001501 max=0.001311 Jy/beam ! Clean residual mean=0.000000 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.275841 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 141 components and 0.275841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053430Jy sigma=1.280802 ! Fit after self-cal, rms=0.053424Jy sigma=1.280686 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053424Jy sigma=1.280686 ! Fit after self-cal, rms=0.053190Jy sigma=1.280385 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8645 mas, bmaj=1.549 mas, bpa=-6.746 degrees ! Estimated noise=0.183124 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000270699 Jy ! Component: 100 - total flux cleaned = -0.000270115 Jy ! Component: 150 - total flux cleaned = -0.000233829 Jy ! Component: 200 - total flux cleaned = -0.000165574 Jy ! Total flux subtracted in 200 components = -0.000165574 Jy ! Clean residual min=-0.001373 max=0.001244 Jy/beam ! Clean residual mean=0.000001 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.275675 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 143 components and 0.275675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053140Jy sigma=1.278971 ! Fit after self-cal, rms=0.053130Jy sigma=1.278787 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.11996e-06 Jy ! Component: 100 - total flux cleaned = -4.3555e-05 Jy ! Component: 150 - total flux cleaned = -4.39569e-05 Jy ! Component: 200 - total flux cleaned = -1.26335e-05 Jy ! Total flux subtracted in 200 components = -1.26335e-05 Jy ! Clean residual min=-0.001350 max=0.001193 Jy/beam ! Clean residual mean=0.000001 rms=0.000276 Jy/beam ! Combined flux in latest and established models = 0.275663 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 147 components and 0.275663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053093Jy sigma=1.277772 ! Fit after self-cal, rms=0.053088Jy sigma=1.277706 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053088Jy sigma=1.277706 ! Fit after self-cal, rms=0.052833Jy sigma=1.277620 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.026 mas, bmaj=2.683 mas, bpa=1.186 degrees ! Estimated noise=0.24191 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.25006e-05 Jy ! Component: 100 - total flux cleaned = 0.000148821 Jy ! Component: 150 - total flux cleaned = 0.000266695 Jy ! Component: 200 - total flux cleaned = 0.00033973 Jy ! Total flux subtracted in 200 components = 0.00033973 Jy ! Clean residual min=-0.000986 max=0.001307 Jy/beam ! Clean residual mean=0.000001 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.276002 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 170 components and 0.276002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052832Jy sigma=1.277577 ! Fit after self-cal, rms=0.052829Jy sigma=1.277541 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (43.2, 24.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123145 Jy ! Component: 100 - total flux cleaned = 0.00188602 Jy ! Component: 150 - total flux cleaned = 0.00204366 Jy ! Component: 200 - total flux cleaned = 0.00220438 Jy ! Total flux subtracted in 200 components = 0.00220438 Jy ! Clean residual min=-0.000903 max=0.001064 Jy/beam ! Clean residual mean=0.000000 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.278207 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 198 components and 0.278207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052809Jy sigma=1.277004 ! Fit after self-cal, rms=0.052805Jy sigma=1.276936 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8614 mas, bmaj=1.549 mas, bpa=-7.018 degrees ! Estimated noise=0.182303 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8614 x 1.549 at -7.018 degrees (North through East) ! Clean map min=-0.0011022 max=0.048193 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6715 mas, bmaj=1.265 mas, bpa=-9.33 degrees ! Estimated noise=0.331641 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0399897 Jy ! Component: 100 - total flux cleaned = 0.0705709 Jy ! Component: 150 - total flux cleaned = 0.0953558 Jy ! Component: 200 - total flux cleaned = 0.11584 Jy ! Total flux subtracted in 200 components = 0.11584 Jy ! Clean residual min=-0.007106 max=0.012436 Jy/beam ! Clean residual mean=0.000033 rms=0.001882 Jy/beam ! Combined flux in latest and established models = 0.11584 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.11584 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8614 mas, bmaj=1.549 mas, bpa=-7.018 degrees ! Estimated noise=0.182303 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0317628 Jy ! Component: 100 - total flux cleaned = 0.0550311 Jy ! Component: 150 - total flux cleaned = 0.0729963 Jy ! Component: 200 - total flux cleaned = 0.0871318 Jy ! Total flux subtracted in 200 components = 0.0871318 Jy ! Clean residual min=-0.004907 max=0.008331 Jy/beam ! Clean residual mean=0.000044 rms=0.001492 Jy/beam ! Combined flux in latest and established models = 0.202972 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 56 components and 0.202972 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113061 Jy ! Component: 100 - total flux cleaned = 0.0204679 Jy ! Component: 150 - total flux cleaned = 0.0279892 Jy ! Component: 200 - total flux cleaned = 0.0342754 Jy ! Total flux subtracted in 200 components = 0.0342754 Jy ! Clean residual min=-0.003049 max=0.003853 Jy/beam ! Clean residual mean=0.000022 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.237248 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 90 components and 0.237248 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00533243 Jy ! Component: 100 - total flux cleaned = 0.00989422 Jy ! Component: 150 - total flux cleaned = 0.0138248 Jy ! Component: 200 - total flux cleaned = 0.0172201 Jy ! Total flux subtracted in 200 components = 0.0172201 Jy ! Clean residual min=-0.002135 max=0.002155 Jy/beam ! Clean residual mean=0.000012 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.254468 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 115 components and 0.254468 Jy ! Inverting map ! Added new window around map position (0.4, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295259 Jy ! Component: 100 - total flux cleaned = 0.00551564 Jy ! Component: 150 - total flux cleaned = 0.00775044 Jy ! Component: 200 - total flux cleaned = 0.00970666 Jy ! Total flux subtracted in 200 components = 0.00970666 Jy ! Clean residual min=-0.001615 max=0.001536 Jy/beam ! Clean residual mean=0.000007 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.264174 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 138 components and 0.264174 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.026 mas, bmaj=2.683 mas, bpa=1.186 degrees ! Estimated noise=0.24191 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00339156 Jy ! Component: 100 - total flux cleaned = 0.00582345 Jy ! Component: 150 - total flux cleaned = 0.00764454 Jy ! Component: 200 - total flux cleaned = 0.009093 Jy ! Total flux subtracted in 200 components = 0.009093 Jy ! Clean residual min=-0.001283 max=0.001218 Jy/beam ! Clean residual mean=0.000005 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.273267 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112711 Jy ! Component: 100 - total flux cleaned = 0.00201889 Jy ! Component: 150 - total flux cleaned = 0.00269395 Jy ! Component: 200 - total flux cleaned = 0.0032624 Jy ! Total flux subtracted in 200 components = 0.0032624 Jy ! Clean residual min=-0.001118 max=0.001016 Jy/beam ! Clean residual mean=0.000001 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.27653 Jy ! Adding 105 model components to the UV plane model. ! The established model now contains 222 components and 0.27653 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8614 mas, bmaj=1.549 mas, bpa=-7.018 degrees ! Estimated noise=0.182303 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010161 Jy ! Component: 100 - total flux cleaned = 0.000321338 Jy ! Component: 150 - total flux cleaned = 0.00051976 Jy ! Component: 200 - total flux cleaned = 0.000734912 Jy ! Total flux subtracted in 200 components = 0.000734912 Jy ! Clean residual min=-0.001195 max=0.001090 Jy/beam ! Clean residual mean=0.000001 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.277265 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 247 components and 0.277265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052718Jy sigma=1.274736 ! Fit after self-cal, rms=0.052616Jy sigma=1.271586 wmodel J1357+4353_X_map.mod ! Writing 247 model components to file: J1357+4353_X_map.mod wobs J1357+4353_X_uvs.fits ! Writing UV FITS file: J1357+4353_X_uvs.fits wwins J1357+4353_X_map.win ! wwins: Wrote 10 windows to J1357+4353_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000114143 Jy ! Component: 100 - total flux cleaned = 7.77208e-05 Jy ! Component: 150 - total flux cleaned = 0.000112265 Jy ! Component: 200 - total flux cleaned = 0.000179486 Jy ! Component: 250 - total flux cleaned = 0.00017916 Jy ! Component: 300 - total flux cleaned = 0.000179299 Jy ! Component: 350 - total flux cleaned = 0.00022633 Jy ! Component: 400 - total flux cleaned = 0.00021109 Jy ! Component: 450 - total flux cleaned = 0.000196276 Jy ! Component: 500 - total flux cleaned = 0.000196538 Jy ! Component: 550 - total flux cleaned = 0.000167284 Jy ! Component: 600 - total flux cleaned = 0.000138817 Jy ! Component: 650 - total flux cleaned = 6.85227e-05 Jy ! Component: 700 - total flux cleaned = 2.67349e-05 Jy ! Component: 750 - total flux cleaned = -2.81233e-05 Jy ! Component: 800 - total flux cleaned = -9.57058e-05 Jy ! Component: 850 - total flux cleaned = -0.000109372 Jy ! Component: 900 - total flux cleaned = -0.000253958 Jy ! Component: 950 - total flux cleaned = -0.000253977 Jy ! Component: 1000 - total flux cleaned = -0.000330771 Jy ! Component: 1050 - total flux cleaned = -0.000343448 Jy ! Component: 1100 - total flux cleaned = -0.000381037 Jy ! Component: 1150 - total flux cleaned = -0.000443187 Jy ! Component: 1200 - total flux cleaned = -0.000467678 Jy ! Component: 1250 - total flux cleaned = -0.000589347 Jy ! Component: 1300 - total flux cleaned = -0.00066134 Jy ! Component: 1350 - total flux cleaned = -0.000708818 Jy ! Component: 1400 - total flux cleaned = -0.000756028 Jy ! Component: 1450 - total flux cleaned = -0.00082606 Jy ! Component: 1500 - total flux cleaned = -0.000918724 Jy ! Component: 1550 - total flux cleaned = -0.000964575 Jy ! Component: 1600 - total flux cleaned = -0.000998763 Jy ! Component: 1650 - total flux cleaned = -0.00105505 Jy ! Component: 1700 - total flux cleaned = -0.00112221 Jy ! Component: 1750 - total flux cleaned = -0.00107783 Jy ! Component: 1800 - total flux cleaned = -0.00114401 Jy ! Component: 1850 - total flux cleaned = -0.00119864 Jy ! Component: 1900 - total flux cleaned = -0.00124191 Jy ! Component: 1950 - total flux cleaned = -0.00126336 Jy ! Component: 2000 - total flux cleaned = -0.00133769 Jy ! Component: 2050 - total flux cleaned = -0.00130582 Jy ! Component: 2100 - total flux cleaned = -0.00138994 Jy ! Component: 2150 - total flux cleaned = -0.00142117 Jy ! Component: 2200 - total flux cleaned = -0.00142124 Jy ! Component: 2250 - total flux cleaned = -0.00145199 Jy ! Component: 2300 - total flux cleaned = -0.0015134 Jy ! Component: 2350 - total flux cleaned = -0.00157422 Jy ! Component: 2400 - total flux cleaned = -0.00159435 Jy ! Component: 2450 - total flux cleaned = -0.00164446 Jy ! Component: 2500 - total flux cleaned = -0.00167435 Jy ! Component: 2550 - total flux cleaned = -0.00176312 Jy ! Component: 2600 - total flux cleaned = -0.00181226 Jy ! Component: 2650 - total flux cleaned = -0.00184144 Jy ! Component: 2700 - total flux cleaned = -0.00187051 Jy ! Component: 2750 - total flux cleaned = -0.00195698 Jy ! Component: 2800 - total flux cleaned = -0.00202388 Jy ! Component: 2850 - total flux cleaned = -0.00201431 Jy ! Component: 2900 - total flux cleaned = -0.00208976 Jy ! Component: 2950 - total flux cleaned = -0.0021178 Jy ! Component: 3000 - total flux cleaned = -0.00215513 Jy ! Component: 3050 - total flux cleaned = -0.00220131 Jy ! Component: 3100 - total flux cleaned = -0.00218293 Jy ! Component: 3150 - total flux cleaned = -0.00224691 Jy ! Component: 3200 - total flux cleaned = -0.00228333 Jy ! Component: 3250 - total flux cleaned = -0.00232854 Jy ! Component: 3300 - total flux cleaned = -0.00237346 Jy ! Component: 3350 - total flux cleaned = -0.00242711 Jy ! Component: 3400 - total flux cleaned = -0.0024093 Jy ! Component: 3450 - total flux cleaned = -0.00244466 Jy ! Component: 3500 - total flux cleaned = -0.00248855 Jy ! Component: 3550 - total flux cleaned = -0.00254092 Jy ! Component: 3600 - total flux cleaned = -0.00261919 Jy ! Component: 3650 - total flux cleaned = -0.00263647 Jy ! Component: 3700 - total flux cleaned = -0.00265358 Jy ! Component: 3750 - total flux cleaned = -0.00267924 Jy ! Component: 3800 - total flux cleaned = -0.00272173 Jy ! Component: 3850 - total flux cleaned = -0.00274708 Jy ! Component: 3900 - total flux cleaned = -0.00277224 Jy ! Component: 3950 - total flux cleaned = -0.00278898 Jy ! Component: 4000 - total flux cleaned = -0.00282219 Jy ! Component: 4050 - total flux cleaned = -0.00283867 Jy ! Total flux subtracted in 4096 components = -0.00283869 Jy ! Clean residual min=-0.000534 max=0.000455 Jy/beam ! Clean residual mean=-0.000000 rms=0.000138 Jy/beam ! Combined flux in latest and established models = 0.274426 Jy keep ! Adding 321 model components to the UV plane model. ! The established model now contains 568 components and 0.274426 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1357+4353_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8614 x 1.549 at -7.018 degrees (North through East) ! Clean map min=-0.00067997 max=0.048379 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1357+4353_X_map.fits wmodel /vlbi/uf001/uva//J1357+4353_X_map.mod ! Writing 568 model components to file: /vlbi/uf001/uva//J1357+4353_X_map.mod wobs /vlbi/uf001/uva//J1357+4353_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1357+4353_X_uvs.fits wwins /vlbi/uf001/uva//J1357+4353_X_map.win ! wwins: Wrote 11 windows to /vlbi/uf001/uva//J1357+4353_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0483795 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00013739 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.851951 0.851951 1.7039 3.4078 6.81561 13.6312 27.2624 54.5249 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.048 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 352.132 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1357+4353_X_dfm.log closed on Mon Jan 14 02:40:41 2019