! Started logfile: /vlbi/uf001/uva//J1356-1101_X_dfm.log on Mon Jan 14 02:39:55 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1356-1101_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1356-1101_X_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.923765 visibilities/baseline/integration-bin. ! Found source: J1356-1101 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 35916 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1356-1101_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006086Jy sigma=21.836696 ! Fit after self-cal, rms=0.926281Jy sigma=20.027983 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6494 mas, bmaj=1.636 mas, bpa=-1.199 degrees ! Estimated noise=0.31638 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0533068 Jy ! Component: 100 - total flux cleaned = 0.0694943 Jy ! Total flux subtracted in 100 components = 0.0694943 Jy ! Clean residual min=-0.005319 max=0.019465 Jy/beam ! Clean residual mean=0.000017 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 0.0694943 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0694943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075562Jy sigma=1.498289 ! Fit after self-cal, rms=0.074888Jy sigma=1.485026 ! Inverting map ! Added new window around map position (-1.2, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167262 Jy ! Component: 100 - total flux cleaned = 0.0256171 Jy ! Total flux subtracted in 100 components = 0.0256171 Jy ! Clean residual min=-0.004011 max=0.017310 Jy/beam ! Clean residual mean=0.000011 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.0951114 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.0951114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070028Jy sigma=1.360551 ! Fit after self-cal, rms=0.069010Jy sigma=1.336259 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107558 Jy ! Component: 100 - total flux cleaned = 0.0142271 Jy ! Total flux subtracted in 100 components = 0.0142271 Jy ! Clean residual min=-0.003314 max=0.010697 Jy/beam ! Clean residual mean=0.000007 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.109338 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 23 components and 0.109338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067087Jy sigma=1.288977 ! Fit after self-cal, rms=0.066565Jy sigma=1.276991 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00496227 Jy ! Component: 100 - total flux cleaned = 0.00538771 Jy ! Total flux subtracted in 100 components = 0.00538771 Jy ! Clean residual min=-0.003042 max=0.006472 Jy/beam ! Clean residual mean=0.000006 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.114726 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 25 components and 0.114726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065768Jy sigma=1.259535 ! Fit after self-cal, rms=0.065544Jy sigma=1.254567 ! Inverting map ! Added new window around map position (-3, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00450058 Jy ! Component: 100 - total flux cleaned = 0.00553986 Jy ! Total flux subtracted in 100 components = 0.00553986 Jy ! Clean residual min=-0.002823 max=0.004952 Jy/beam ! Clean residual mean=0.000005 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.120266 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 29 components and 0.120266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064980Jy sigma=1.241625 ! Fit after self-cal, rms=0.064895Jy sigma=1.239778 ! Inverting map ! Added new window around map position (2.6, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00373536 Jy ! Component: 100 - total flux cleaned = 0.0050803 Jy ! Total flux subtracted in 100 components = 0.0050803 Jy ! Clean residual min=-0.002439 max=0.003044 Jy/beam ! Clean residual mean=0.000005 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.125346 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 0.125346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064594Jy sigma=1.232961 ! Fit after self-cal, rms=0.064557Jy sigma=1.232493 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8304 mas, bmaj=1.979 mas, bpa=-0.8589 degrees ! Estimated noise=0.175619 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00385723 Jy ! Component: 100 - total flux cleaned = 0.00499257 Jy ! Component: 150 - total flux cleaned = 0.00548777 Jy ! Component: 200 - total flux cleaned = 0.00604838 Jy ! Total flux subtracted in 200 components = 0.00604838 Jy ! Clean residual min=-0.002076 max=0.003492 Jy/beam ! Clean residual mean=0.000008 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.131395 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 48 components and 0.131395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064243Jy sigma=1.225559 ! Fit after self-cal, rms=0.064197Jy sigma=1.224618 ! Inverting map ! Added new window around map position (0.6, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188212 Jy ! Component: 100 - total flux cleaned = 0.00280726 Jy ! Component: 150 - total flux cleaned = 0.00352277 Jy ! Component: 200 - total flux cleaned = 0.00390229 Jy ! Total flux subtracted in 200 components = 0.00390229 Jy ! Clean residual min=-0.001721 max=0.002041 Jy/beam ! Clean residual mean=0.000006 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.135297 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 67 components and 0.135297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063998Jy sigma=1.219995 ! Fit after self-cal, rms=0.063978Jy sigma=1.219723 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8304 x 1.979 at -0.8589 degrees (North through East) ! Clean map min=-0.0016182 max=0.06226 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 0.91 KP 1.05 ! LA 0.96 MK 0.98 NL 1.12 OV 0.96 ! PT 0.97 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 0.93 KP 1.03 ! LA 0.97 MK 1.02 NL 1.14 OV 0.93 ! PT 1.01 SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 1.01 KP 1.07 ! LA 0.98 MK 1.07 NL 1.15 OV 0.91 ! PT 0.98 SC 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.99 HN 0.94 KP 1.04 ! LA 0.97 MK 1.03 NL 1.14 OV 0.93 ! PT 1.01 SC 0.91 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 0.91 KP 1.02 ! LA 0.96 MK 0.97 NL 1.14 OV 0.95 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.94 KP 1.00 ! LA 0.96 MK 0.99 NL 1.08 OV 0.96 ! PT 1.02 SC 0.93 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.90 KP 1.03 ! LA 0.97 MK 1.03 NL 1.15 OV 0.94 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.98 KP 1.05 ! LA 0.95 MK 1.01 NL 1.14 OV 0.94 ! PT 0.99 SC 0.94 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 0.93 KP 1.06 ! LA 0.98 MK 1.02 NL 1.18 OV 0.91 ! PT 1.01 SC 0.88 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 0.90 KP 1.05 ! LA 0.98 MK 1.02 NL 1.13 OV 0.91 ! PT 0.99 SC 0.90 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 0.86 KP 1.07 ! LA 0.95 MK 1.01 NL 1.13 OV 0.92 ! PT 1.00 SC 0.89 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.95 HN 0.93 KP 1.02 ! LA 0.96 MK 0.98 NL 1.11 OV 0.95 ! PT 0.97 SC 0.95 ! ! ! Fit before self-cal, rms=0.063978Jy sigma=1.219723 ! Fit after self-cal, rms=0.061785Jy sigma=1.210588 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8213 mas, bmaj=1.965 mas, bpa=0.003551 degrees ! Estimated noise=0.174408 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000571812 Jy ! Component: 100 - total flux cleaned = 0.000673562 Jy ! Component: 150 - total flux cleaned = 0.000679 Jy ! Component: 200 - total flux cleaned = 0.000566762 Jy ! Total flux subtracted in 200 components = 0.000566762 Jy ! Clean residual min=-0.001102 max=0.001560 Jy/beam ! Clean residual mean=0.000002 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.135864 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 94 components and 0.135864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061708Jy sigma=1.208870 ! Fit after self-cal, rms=0.061719Jy sigma=1.208483 ! Inverting map ! Added new window around map position (-4.2, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144514 Jy ! Component: 100 - total flux cleaned = 0.00157264 Jy ! Component: 150 - total flux cleaned = 0.0014381 Jy ! Component: 200 - total flux cleaned = 0.00137712 Jy ! Total flux subtracted in 200 components = 0.00137712 Jy ! Clean residual min=-0.000957 max=0.001105 Jy/beam ! Clean residual mean=0.000002 rms=0.000246 Jy/beam ! Combined flux in latest and established models = 0.137241 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 114 components and 0.137241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061666Jy sigma=1.207354 ! Fit after self-cal, rms=0.061662Jy sigma=1.207265 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061662Jy sigma=1.207265 ! Fit after self-cal, rms=0.062326Jy sigma=1.205200 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8193 mas, bmaj=1.963 mas, bpa=-0.003045 degrees ! Estimated noise=0.174364 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.89254e-05 Jy ! Component: 100 - total flux cleaned = -0.000180774 Jy ! Component: 150 - total flux cleaned = -0.000344132 Jy ! Component: 200 - total flux cleaned = -0.000394383 Jy ! Total flux subtracted in 200 components = -0.000394383 Jy ! Clean residual min=-0.000879 max=0.000931 Jy/beam ! Clean residual mean=0.000002 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.136846 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 145 components and 0.136847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062301Jy sigma=1.204626 ! Fit after self-cal, rms=0.062314Jy sigma=1.204562 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.12277e-05 Jy ! Component: 100 - total flux cleaned = -1.03056e-05 Jy ! Component: 150 - total flux cleaned = -1.09964e-05 Jy ! Component: 200 - total flux cleaned = -2.99182e-05 Jy ! Total flux subtracted in 200 components = -2.99182e-05 Jy ! Clean residual min=-0.000881 max=0.000921 Jy/beam ! Clean residual mean=0.000002 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.136817 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 152 components and 0.136817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062300Jy sigma=1.204246 ! Fit after self-cal, rms=0.062299Jy sigma=1.204225 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062299Jy sigma=1.204225 ! Fit after self-cal, rms=0.062418Jy sigma=1.203785 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8188 mas, bmaj=1.963 mas, bpa=0.0432 degrees ! Estimated noise=0.174334 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000138261 Jy ! Component: 100 - total flux cleaned = -0.000263653 Jy ! Component: 150 - total flux cleaned = -0.000395304 Jy ! Component: 200 - total flux cleaned = -0.000465203 Jy ! Total flux subtracted in 200 components = -0.000465203 Jy ! Clean residual min=-0.000857 max=0.000924 Jy/beam ! Clean residual mean=0.000001 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.136351 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 162 components and 0.136351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062406Jy sigma=1.203518 ! Fit after self-cal, rms=0.062411Jy sigma=1.203493 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (51, 40). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000608582 Jy ! Component: 100 - total flux cleaned = 0.000721821 Jy ! Component: 150 - total flux cleaned = 0.0007383 Jy ! Component: 200 - total flux cleaned = 0.000737628 Jy ! Total flux subtracted in 200 components = 0.000737628 Jy ! Clean residual min=-0.000855 max=0.000818 Jy/beam ! Clean residual mean=0.000001 rms=0.000201 Jy/beam ! Combined flux in latest and established models = 0.137089 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 173 components and 0.137089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062397Jy sigma=1.203220 ! Fit after self-cal, rms=0.062395Jy sigma=1.203194 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062395Jy sigma=1.203194 ! Fit after self-cal, rms=0.062444Jy sigma=1.203162 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.099 mas, bmaj=3.882 mas, bpa=5.672 degrees ! Estimated noise=0.228513 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000232298 Jy ! Component: 100 - total flux cleaned = -0.000133226 Jy ! Component: 150 - total flux cleaned = -5.28984e-05 Jy ! Component: 200 - total flux cleaned = 1.34971e-06 Jy ! Total flux subtracted in 200 components = 1.34971e-06 Jy ! Clean residual min=-0.000806 max=0.000860 Jy/beam ! Clean residual mean=0.000003 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.13709 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 193 components and 0.13709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062441Jy sigma=1.203119 ! Fit after self-cal, rms=0.062442Jy sigma=1.203098 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.31735e-05 Jy ! Component: 100 - total flux cleaned = 0.000157181 Jy ! Component: 150 - total flux cleaned = 0.000191546 Jy ! Component: 200 - total flux cleaned = 0.000224281 Jy ! Total flux subtracted in 200 components = 0.000224281 Jy ! Clean residual min=-0.000791 max=0.000839 Jy/beam ! Clean residual mean=0.000002 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.137315 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 201 components and 0.137315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062441Jy sigma=1.203061 ! Fit after self-cal, rms=0.062440Jy sigma=1.203053 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8187 mas, bmaj=1.962 mas, bpa=0.06833 degrees ! Estimated noise=0.17438 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8187 x 1.962 at 0.06833 degrees (North through East) ! Clean map min=-0.0012836 max=0.061509 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6427 mas, bmaj=1.629 mas, bpa=-0.2581 degrees ! Estimated noise=0.310498 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.057335 Jy ! Component: 100 - total flux cleaned = 0.0826968 Jy ! Component: 150 - total flux cleaned = 0.0964241 Jy ! Component: 200 - total flux cleaned = 0.105046 Jy ! Total flux subtracted in 200 components = 0.105046 Jy ! Clean residual min=-0.002702 max=0.004689 Jy/beam ! Clean residual mean=0.000006 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.105046 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.105046 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8187 mas, bmaj=1.962 mas, bpa=0.06833 degrees ! Estimated noise=0.17438 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00845816 Jy ! Component: 100 - total flux cleaned = 0.0139583 Jy ! Component: 150 - total flux cleaned = 0.0178324 Jy ! Component: 200 - total flux cleaned = 0.0207427 Jy ! Total flux subtracted in 200 components = 0.0207427 Jy ! Clean residual min=-0.001276 max=0.001812 Jy/beam ! Clean residual mean=0.000004 rms=0.000333 Jy/beam ! Combined flux in latest and established models = 0.125789 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 37 components and 0.125789 Jy ! Inverting map ! Added new window around map position (0.8, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232295 Jy ! Component: 100 - total flux cleaned = 0.00413563 Jy ! Component: 150 - total flux cleaned = 0.00534183 Jy ! Component: 200 - total flux cleaned = 0.00627593 Jy ! Total flux subtracted in 200 components = 0.00627593 Jy ! Clean residual min=-0.001086 max=0.001110 Jy/beam ! Clean residual mean=0.000003 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.132065 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 54 components and 0.132065 Jy ! Inverting map ! Added new window around map position (16.2, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000782687 Jy ! Component: 100 - total flux cleaned = 0.00127616 Jy ! Component: 150 - total flux cleaned = 0.00164752 Jy ! Component: 200 - total flux cleaned = 0.00202911 Jy ! Total flux subtracted in 200 components = 0.00202911 Jy ! Clean residual min=-0.001033 max=0.000991 Jy/beam ! Clean residual mean=0.000002 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.134094 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 72 components and 0.134094 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.099 mas, bmaj=3.882 mas, bpa=5.672 degrees ! Estimated noise=0.228513 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110757 Jy ! Component: 100 - total flux cleaned = 0.0018708 Jy ! Component: 150 - total flux cleaned = 0.00241951 Jy ! Component: 200 - total flux cleaned = 0.00263573 Jy ! Total flux subtracted in 200 components = 0.00263573 Jy ! Clean residual min=-0.000828 max=0.000853 Jy/beam ! Clean residual mean=0.000003 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.13673 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000177186 Jy ! Component: 100 - total flux cleaned = 0.000322453 Jy ! Component: 150 - total flux cleaned = 0.000457956 Jy ! Component: 200 - total flux cleaned = 0.000536956 Jy ! Total flux subtracted in 200 components = 0.000536956 Jy ! Clean residual min=-0.000813 max=0.000816 Jy/beam ! Clean residual mean=0.000003 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.137267 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 106 components and 0.137267 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8187 mas, bmaj=1.962 mas, bpa=0.06833 degrees ! Estimated noise=0.17438 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000182256 Jy ! Component: 100 - total flux cleaned = -0.000215304 Jy ! Component: 150 - total flux cleaned = -0.00015986 Jy ! Component: 200 - total flux cleaned = -8.43724e-05 Jy ! Total flux subtracted in 200 components = -8.43724e-05 Jy ! Clean residual min=-0.000952 max=0.000978 Jy/beam ! Clean residual mean=0.000001 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.137182 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 122 components and 0.137182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062456Jy sigma=1.203536 ! Fit after self-cal, rms=0.062448Jy sigma=1.203295 wmodel J1356-1101_X_map.mod ! Writing 122 model components to file: J1356-1101_X_map.mod wobs J1356-1101_X_uvs.fits ! Writing UV FITS file: J1356-1101_X_uvs.fits wwins J1356-1101_X_map.win ! wwins: Wrote 11 windows to J1356-1101_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00016072 Jy ! Component: 100 - total flux cleaned = -0.000146502 Jy ! Component: 150 - total flux cleaned = -0.000102838 Jy ! Component: 200 - total flux cleaned = -0.000102701 Jy ! Component: 250 - total flux cleaned = -7.55234e-05 Jy ! Component: 300 - total flux cleaned = -6.21815e-05 Jy ! Component: 350 - total flux cleaned = -3.60682e-05 Jy ! Component: 400 - total flux cleaned = -2.32336e-05 Jy ! Component: 450 - total flux cleaned = -1.05312e-05 Jy ! Component: 500 - total flux cleaned = 3.87719e-05 Jy ! Component: 550 - total flux cleaned = 7.52463e-05 Jy ! Component: 600 - total flux cleaned = 0.000146996 Jy ! Component: 650 - total flux cleaned = 0.000170692 Jy ! Component: 700 - total flux cleaned = 0.000229046 Jy ! Component: 750 - total flux cleaned = 0.000263427 Jy ! Component: 800 - total flux cleaned = 0.000263542 Jy ! Component: 850 - total flux cleaned = 0.000297156 Jy ! Component: 900 - total flux cleaned = 0.000330598 Jy ! Component: 950 - total flux cleaned = 0.000374726 Jy ! Component: 1000 - total flux cleaned = 0.000407422 Jy ! Component: 1050 - total flux cleaned = 0.000482567 Jy ! Component: 1100 - total flux cleaned = 0.000524762 Jy ! Component: 1150 - total flux cleaned = 0.000503659 Jy ! Component: 1200 - total flux cleaned = 0.000545438 Jy ! Component: 1250 - total flux cleaned = 0.000586772 Jy ! Component: 1300 - total flux cleaned = 0.000627521 Jy ! Component: 1350 - total flux cleaned = 0.000657785 Jy ! Component: 1400 - total flux cleaned = 0.000677744 Jy ! Component: 1450 - total flux cleaned = 0.000697615 Jy ! Component: 1500 - total flux cleaned = 0.000727293 Jy ! Component: 1550 - total flux cleaned = 0.000746882 Jy ! Component: 1600 - total flux cleaned = 0.00076624 Jy ! Component: 1650 - total flux cleaned = 0.000804965 Jy ! Component: 1700 - total flux cleaned = 0.000843317 Jy ! Component: 1750 - total flux cleaned = 0.00090996 Jy ! Component: 1800 - total flux cleaned = 0.000928752 Jy ! Component: 1850 - total flux cleaned = 0.000928745 Jy ! Component: 1900 - total flux cleaned = 0.000947409 Jy ! Component: 1950 - total flux cleaned = 0.000993723 Jy ! Component: 2000 - total flux cleaned = 0.000975244 Jy ! Component: 2050 - total flux cleaned = 0.00102109 Jy ! Component: 2100 - total flux cleaned = 0.00103023 Jy ! Component: 2150 - total flux cleaned = 0.00106641 Jy ! Component: 2200 - total flux cleaned = 0.00104835 Jy ! Component: 2250 - total flux cleaned = 0.00104838 Jy ! Component: 2300 - total flux cleaned = 0.00109279 Jy ! Component: 2350 - total flux cleaned = 0.00109274 Jy ! Component: 2400 - total flux cleaned = 0.00111031 Jy ! Component: 2450 - total flux cleaned = 0.00111028 Jy ! Component: 2500 - total flux cleaned = 0.00111899 Jy ! Component: 2550 - total flux cleaned = 0.00112764 Jy ! Component: 2600 - total flux cleaned = 0.00116201 Jy ! Component: 2650 - total flux cleaned = 0.00116191 Jy ! Component: 2700 - total flux cleaned = 0.00117883 Jy ! Component: 2750 - total flux cleaned = 0.00118729 Jy ! Component: 2800 - total flux cleaned = 0.00118729 Jy ! Component: 2850 - total flux cleaned = 0.00119561 Jy ! Component: 2900 - total flux cleaned = 0.00119562 Jy ! Component: 2950 - total flux cleaned = 0.00119567 Jy ! Component: 3000 - total flux cleaned = 0.00121212 Jy ! Component: 3050 - total flux cleaned = 0.00117947 Jy ! Component: 3100 - total flux cleaned = 0.00116331 Jy ! Component: 3150 - total flux cleaned = 0.00113909 Jy ! Component: 3200 - total flux cleaned = 0.00111499 Jy ! Component: 3250 - total flux cleaned = 0.00116297 Jy ! Component: 3300 - total flux cleaned = 0.00117892 Jy ! Component: 3350 - total flux cleaned = 0.00114724 Jy ! Component: 3400 - total flux cleaned = 0.00115507 Jy ! Component: 3450 - total flux cleaned = 0.00117073 Jy ! Component: 3500 - total flux cleaned = 0.0011317 Jy ! Component: 3550 - total flux cleaned = 0.00113952 Jy ! Component: 3600 - total flux cleaned = 0.00110853 Jy ! Component: 3650 - total flux cleaned = 0.00110858 Jy ! Component: 3700 - total flux cleaned = 0.00110858 Jy ! Component: 3750 - total flux cleaned = 0.00108578 Jy ! Component: 3800 - total flux cleaned = 0.00107059 Jy ! Component: 3850 - total flux cleaned = 0.00107811 Jy ! Component: 3900 - total flux cleaned = 0.00102552 Jy ! Component: 3950 - total flux cleaned = 0.00104051 Jy ! Component: 4000 - total flux cleaned = 0.00106279 Jy ! Component: 4050 - total flux cleaned = 0.00105542 Jy ! Total flux subtracted in 4096 components = 0.00104069 Jy ! Clean residual min=-0.000463 max=0.000468 Jy/beam ! Clean residual mean=0.000000 rms=0.000129 Jy/beam ! Combined flux in latest and established models = 0.138223 Jy keep ! Adding 330 model components to the UV plane model. ! The established model now contains 451 components and 0.138223 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1356-1101_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8187 x 1.962 at 0.06833 degrees (North through East) ! Clean map min=-0.00080436 max=0.058427 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1356-1101_X_map.fits wmodel /vlbi/uf001/uva//J1356-1101_X_map.mod ! Writing 451 model components to file: /vlbi/uf001/uva//J1356-1101_X_map.mod wobs /vlbi/uf001/uva//J1356-1101_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1356-1101_X_uvs.fits wwins /vlbi/uf001/uva//J1356-1101_X_map.win ! wwins: Wrote 12 windows to /vlbi/uf001/uva//J1356-1101_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0584269 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00012859 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.660259 0.660259 1.32052 2.64104 5.28207 10.5641 21.1283 42.2566 84.5132 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.058 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 454.367 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1356-1101_X_dfm.log closed on Mon Jan 14 02:40:02 2019