! Started logfile: /vlbi/uf001/uva//J1352-2745_S_dfm.log on Mon Jan 14 02:38:39 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1352-2745_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1352-2745_S_uva.fits
! AN table 1: 38 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.980117 visibilities/baseline/integration-bin.
! Found source: J1352-2745
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5028 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1352-2745_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005921Jy  sigma=16.018716
! Fit after  self-cal, rms=0.801246Jy  sigma=12.390118
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.478 mas, bmaj=6.856 mas, bpa=-6.652 degrees
! Estimated noise=0.983292 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.170475 Jy
! Component: 100  -  total flux cleaned = 0.20765 Jy
! Total flux subtracted in 100 components = 0.20765 Jy
! Clean residual min=-0.010927 max=0.017775 Jy/beam
! Clean residual mean=-0.000057 rms=0.003222 Jy/beam
! Combined flux in latest and established models = 0.20765 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.20765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.121205Jy  sigma=1.515246
! Fit after  self-cal, rms=0.121178Jy  sigma=1.515146
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.969 mas, bmaj=7.96 mas, bpa=-5.757 degrees
! Estimated noise=0.664276 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.5, 8.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0185332 Jy
! Component: 100  -  total flux cleaned = 0.0287517 Jy
! Component: 150  -  total flux cleaned = 0.0349234 Jy
! Component: 200  -  total flux cleaned = 0.0369052 Jy
! Total flux subtracted in 200 components = 0.0369052 Jy
! Clean residual min=-0.008366 max=0.014810 Jy/beam
! Clean residual mean=0.000017 rms=0.002543 Jy/beam
! Combined flux in latest and established models = 0.244555 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 28 components and 0.244555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118408Jy  sigma=1.453418
! Fit after  self-cal, rms=0.118028Jy  sigma=1.443091
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.969 x 7.96 at -5.757 degrees (North through East)
! Clean map  min=-0.0085857  max=0.20876 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.47     FD        0.95     HN        1.14     KP        0.96     
!   LA        0.89     MK        0.96     NL        1.05     OV        0.94     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        2.80     FD        1.06     HN        1.14     KP        1.00     
!   LA        0.90     MK        0.97     NL        1.11     OV        0.97     
!   PT        0.93     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.42     FD        0.95     HN        1.17     KP        0.95     
!   LA        0.92     MK        0.97     NL        1.03     OV        0.93     
!   PT        0.94     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.118028Jy  sigma=1.443091
! Fit after  self-cal, rms=0.181357Jy  sigma=1.361146
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.949 mas, bmaj=7.942 mas, bpa=-5.813 degrees
! Estimated noise=0.668152 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00230513 Jy
! Component: 100  -  total flux cleaned = -0.00259401 Jy
! Component: 150  -  total flux cleaned = -0.00292755 Jy
! Component: 200  -  total flux cleaned = -0.00315381 Jy
! Total flux subtracted in 200 components = -0.00315381 Jy
! Clean residual min=-0.006363 max=0.007677 Jy/beam
! Clean residual mean=0.000017 rms=0.001484 Jy/beam
! Combined flux in latest and established models = 0.241401 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 47 components and 0.241401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.181192Jy  sigma=1.358508
! Fit after  self-cal, rms=0.181605Jy  sigma=1.357744
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.181605Jy  sigma=1.357744
! Fit after  self-cal, rms=0.184850Jy  sigma=1.357567
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.95 mas, bmaj=7.939 mas, bpa=-5.777 degrees
! Estimated noise=0.668145 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00120903 Jy
! Component: 100  -  total flux cleaned = -0.0015908 Jy
! Component: 150  -  total flux cleaned = -0.00179489 Jy
! Component: 200  -  total flux cleaned = -0.00204324 Jy
! Total flux subtracted in 200 components = -0.00204324 Jy
! Clean residual min=-0.006163 max=0.007436 Jy/beam
! Clean residual mean=0.000018 rms=0.001456 Jy/beam
! Combined flux in latest and established models = 0.239358 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 61 components and 0.239358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.184741Jy  sigma=1.356161
! Fit after  self-cal, rms=0.184771Jy  sigma=1.356022
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (31.5, -32).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00635697 Jy
! Component: 100  -  total flux cleaned = 0.00652619 Jy
! Component: 150  -  total flux cleaned = 0.00613787 Jy
! Component: 200  -  total flux cleaned = 0.00562481 Jy
! Total flux subtracted in 200 components = 0.00562481 Jy
! Clean residual min=-0.005160 max=0.006122 Jy/beam
! Clean residual mean=0.000024 rms=0.001326 Jy/beam
! Combined flux in latest and established models = 0.244983 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 79 components and 0.244983 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.184340Jy  sigma=1.349843
! Fit after  self-cal, rms=0.184292Jy  sigma=1.348824
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.184292Jy  sigma=1.348824
! Fit after  self-cal, rms=0.178992Jy  sigma=1.320608
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.959 mas, bmaj=7.944 mas, bpa=-5.89 degrees
! Estimated noise=0.66925 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00286135 Jy
! Component: 100  -  total flux cleaned = -0.00393455 Jy
! Component: 150  -  total flux cleaned = -0.00412376 Jy
! Component: 200  -  total flux cleaned = -0.00423477 Jy
! Total flux subtracted in 200 components = -0.00423477 Jy
! Clean residual min=-0.003606 max=0.003870 Jy/beam
! Clean residual mean=0.000008 rms=0.000874 Jy/beam
! Combined flux in latest and established models = 0.240748 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 102 components and 0.240748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.178859Jy  sigma=1.319128
! Fit after  self-cal, rms=0.178964Jy  sigma=1.318777
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-11.5, 40.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00346276 Jy
! Component: 100  -  total flux cleaned = 0.0034144 Jy
! Component: 150  -  total flux cleaned = 0.00328181 Jy
! Component: 200  -  total flux cleaned = 0.00322254 Jy
! Total flux subtracted in 200 components = 0.00322254 Jy
! Clean residual min=-0.003362 max=0.003289 Jy/beam
! Clean residual mean=0.000013 rms=0.000822 Jy/beam
! Combined flux in latest and established models = 0.24397 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 127 components and 0.24397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.178818Jy  sigma=1.316425
! Fit after  self-cal, rms=0.178788Jy  sigma=1.316333
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.178788Jy  sigma=1.316333
! Fit after  self-cal, rms=0.179402Jy  sigma=1.315963
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.644 mas, bmaj=19.59 mas, bpa=-1.688 degrees
! Estimated noise=0.874661 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000243151 Jy
! Component: 100  -  total flux cleaned = -0.000541442 Jy
! Component: 150  -  total flux cleaned = -0.00069749 Jy
! Component: 200  -  total flux cleaned = -0.000885579 Jy
! Total flux subtracted in 200 components = -0.000885579 Jy
! Clean residual min=-0.003511 max=0.003737 Jy/beam
! Clean residual mean=0.000028 rms=0.001095 Jy/beam
! Combined flux in latest and established models = 0.243085 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 156 components and 0.243085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.179362Jy  sigma=1.315384
! Fit after  self-cal, rms=0.179379Jy  sigma=1.315305
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000415088 Jy
! Component: 100  -  total flux cleaned = -0.00054202 Jy
! Component: 150  -  total flux cleaned = -0.000698989 Jy
! Component: 200  -  total flux cleaned = -0.000808924 Jy
! Total flux subtracted in 200 components = -0.000808924 Jy
! Clean residual min=-0.003441 max=0.003672 Jy/beam
! Clean residual mean=0.000026 rms=0.001080 Jy/beam
! Combined flux in latest and established models = 0.242276 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 171 components and 0.242276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.179348Jy  sigma=1.315447
! Fit after  self-cal, rms=0.179342Jy  sigma=1.315413
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.959 mas, bmaj=7.939 mas, bpa=-5.866 degrees
! Estimated noise=0.666935 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.959 x 7.939 at -5.866 degrees (North through East)
! Clean map  min=-0.0033519  max=0.21002 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.47 mas, bmaj=6.835 mas, bpa=-6.51 degrees
! Estimated noise=0.986154 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.170759 Jy
! Component: 100  -  total flux cleaned = 0.20816 Jy
! Component: 150  -  total flux cleaned = 0.220093 Jy
! Component: 200  -  total flux cleaned = 0.227419 Jy
! Total flux subtracted in 200 components = 0.227419 Jy
! Clean residual min=-0.005269 max=0.005991 Jy/beam
! Clean residual mean=-0.000017 rms=0.001432 Jy/beam
! Combined flux in latest and established models = 0.227418 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.227418 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.959 mas, bmaj=7.939 mas, bpa=-5.866 degrees
! Estimated noise=0.666935 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00549209 Jy
! Component: 100  -  total flux cleaned = 0.00851227 Jy
! Component: 150  -  total flux cleaned = 0.0099444 Jy
! Component: 200  -  total flux cleaned = 0.0108439 Jy
! Total flux subtracted in 200 components = 0.0108439 Jy
! Clean residual min=-0.003377 max=0.003288 Jy/beam
! Clean residual mean=0.000006 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 0.238262 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 48 components and 0.238262 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.644 mas, bmaj=19.59 mas, bpa=-1.688 degrees
! Estimated noise=0.874661 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00211756 Jy
! Component: 100  -  total flux cleaned = 0.00253392 Jy
! Component: 150  -  total flux cleaned = 0.00270448 Jy
! Component: 200  -  total flux cleaned = 0.00280605 Jy
! Total flux subtracted in 200 components = 0.00280605 Jy
! Clean residual min=-0.003648 max=0.003869 Jy/beam
! Clean residual mean=0.000022 rms=0.001117 Jy/beam
! Combined flux in latest and established models = 0.241068 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.34326e-05 Jy
! Component: 100  -  total flux cleaned = 0.000136187 Jy
! Component: 150  -  total flux cleaned = 0.000137513 Jy
! Component: 200  -  total flux cleaned = 0.000213439 Jy
! Total flux subtracted in 200 components = 0.000213439 Jy
! Clean residual min=-0.003501 max=0.003753 Jy/beam
! Clean residual mean=0.000023 rms=0.001098 Jy/beam
! Combined flux in latest and established models = 0.241282 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 78 components and 0.241282 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.959 mas, bmaj=7.939 mas, bpa=-5.866 degrees
! Estimated noise=0.666935 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.96188e-05 Jy
! Component: 100  -  total flux cleaned = -7.94345e-05 Jy
! Component: 150  -  total flux cleaned = -2.75085e-05 Jy
! Component: 200  -  total flux cleaned = -7.37584e-05 Jy
! Total flux subtracted in 200 components = -7.37584e-05 Jy
! Clean residual min=-0.002925 max=0.003051 Jy/beam
! Clean residual mean=0.000011 rms=0.000799 Jy/beam
! Combined flux in latest and established models = 0.241208 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 109 components and 0.241208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.178947Jy  sigma=1.315512
! Fit after  self-cal, rms=0.178992Jy  sigma=1.315172
wmodel J1352-2745_S_map.mod
! Writing 109 model components to file: J1352-2745_S_map.mod
wobs   J1352-2745_S_uvs.fits
! Writing UV FITS file: J1352-2745_S_uvs.fits
wwins  J1352-2745_S_map.win
! wwins: Wrote 4 windows to J1352-2745_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000565166 Jy
! Component: 100  -  total flux cleaned = 0.00113202 Jy
! Component: 150  -  total flux cleaned = 0.00147753 Jy
! Component: 200  -  total flux cleaned = 0.00180981 Jy
! Component: 250  -  total flux cleaned = 0.00199231 Jy
! Component: 300  -  total flux cleaned = 0.00212578 Jy
! Component: 350  -  total flux cleaned = 0.00221272 Jy
! Component: 400  -  total flux cleaned = 0.00229757 Jy
! Component: 450  -  total flux cleaned = 0.00242148 Jy
! Component: 500  -  total flux cleaned = 0.00242207 Jy
! Component: 550  -  total flux cleaned = 0.00258209 Jy
! Component: 600  -  total flux cleaned = 0.00269989 Jy
! Component: 650  -  total flux cleaned = 0.00281481 Jy
! Component: 700  -  total flux cleaned = 0.0028902 Jy
! Component: 750  -  total flux cleaned = 0.00285333 Jy
! Component: 800  -  total flux cleaned = 0.00292767 Jy
! Component: 850  -  total flux cleaned = 0.00289176 Jy
! Component: 900  -  total flux cleaned = 0.00296326 Jy
! Component: 950  -  total flux cleaned = 0.00285785 Jy
! Component: 1000  -  total flux cleaned = 0.00282325 Jy
! Component: 1050  -  total flux cleaned = 0.00275488 Jy
! Component: 1100  -  total flux cleaned = 0.00268733 Jy
! Component: 1150  -  total flux cleaned = 0.00255261 Jy
! Component: 1200  -  total flux cleaned = 0.00242028 Jy
! Component: 1250  -  total flux cleaned = 0.00219127 Jy
! Component: 1300  -  total flux cleaned = 0.0021268 Jy
! Component: 1350  -  total flux cleaned = 0.00209504 Jy
! Component: 1400  -  total flux cleaned = 0.0020631 Jy
! Component: 1450  -  total flux cleaned = 0.00193707 Jy
! Component: 1500  -  total flux cleaned = 0.00190608 Jy
! Component: 1550  -  total flux cleaned = 0.00190599 Jy
! Component: 1600  -  total flux cleaned = 0.0017838 Jy
! Component: 1650  -  total flux cleaned = 0.00178383 Jy
! Component: 1700  -  total flux cleaned = 0.0017239 Jy
! Component: 1750  -  total flux cleaned = 0.0016644 Jy
! Component: 1800  -  total flux cleaned = 0.00154688 Jy
! Component: 1850  -  total flux cleaned = 0.00145947 Jy
! Component: 1900  -  total flux cleaned = 0.00137311 Jy
! Component: 1950  -  total flux cleaned = 0.00137293 Jy
! Component: 2000  -  total flux cleaned = 0.0012594 Jy
! Component: 2050  -  total flux cleaned = 0.00125923 Jy
! Component: 2100  -  total flux cleaned = 0.00117529 Jy
! Component: 2150  -  total flux cleaned = 0.00114778 Jy
! Component: 2200  -  total flux cleaned = 0.00114824 Jy
! Component: 2250  -  total flux cleaned = 0.00114832 Jy
! Component: 2300  -  total flux cleaned = 0.00114831 Jy
! Component: 2350  -  total flux cleaned = 0.0010948 Jy
! Component: 2400  -  total flux cleaned = 0.00106812 Jy
! Component: 2450  -  total flux cleaned = 0.00104197 Jy
! Component: 2500  -  total flux cleaned = 0.000989618 Jy
! Component: 2550  -  total flux cleaned = 0.000989916 Jy
! Component: 2600  -  total flux cleaned = 0.00093825 Jy
! Component: 2650  -  total flux cleaned = 0.000886966 Jy
! Component: 2700  -  total flux cleaned = 0.000912791 Jy
! Component: 2750  -  total flux cleaned = 0.000862079 Jy
! Component: 2800  -  total flux cleaned = 0.000836932 Jy
! Component: 2850  -  total flux cleaned = 0.00068742 Jy
! Component: 2900  -  total flux cleaned = 0.000712382 Jy
! Component: 2950  -  total flux cleaned = 0.000736826 Jy
! Component: 3000  -  total flux cleaned = 0.000639086 Jy
! Component: 3050  -  total flux cleaned = 0.000566287 Jy
! Component: 3100  -  total flux cleaned = 0.000566211 Jy
! Component: 3150  -  total flux cleaned = 0.000470415 Jy
! Component: 3200  -  total flux cleaned = 0.00042288 Jy
! Component: 3250  -  total flux cleaned = 0.000328527 Jy
! Component: 3300  -  total flux cleaned = 0.000351972 Jy
! Component: 3350  -  total flux cleaned = 0.000281984 Jy
! Component: 3400  -  total flux cleaned = 0.000282038 Jy
! Component: 3450  -  total flux cleaned = 0.000235966 Jy
! Component: 3500  -  total flux cleaned = 0.000167098 Jy
! Component: 3550  -  total flux cleaned = 3.05807e-05 Jy
! Component: 3600  -  total flux cleaned = 0.000121211 Jy
! Component: 3650  -  total flux cleaned = 3.1131e-05 Jy
! Component: 3700  -  total flux cleaned = 5.35481e-05 Jy
! Component: 3750  -  total flux cleaned = -1.32869e-05 Jy
! Component: 3800  -  total flux cleaned = 5.32304e-05 Jy
! Component: 3850  -  total flux cleaned = -3.48863e-05 Jy
! Component: 3900  -  total flux cleaned = -5.68073e-05 Jy
! Component: 3950  -  total flux cleaned = -7.8632e-05 Jy
! Component: 4000  -  total flux cleaned = -0.000100347 Jy
! Component: 4050  -  total flux cleaned = -0.000164973 Jy
! Total flux subtracted in 4096 components = -0.000122123 Jy
! Clean residual min=-0.001407 max=0.001172 Jy/beam
! Clean residual mean=0.000003 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.241086 Jy
keep
! Adding 308 model components to the UV plane model.
! The established model now contains 417 components and 0.241086 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1352-2745_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.959 x 7.939 at -5.866 degrees (North through East)
! Clean map  min=-0.0032916  max=0.21407 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1352-2745_S_map.fits
wmodel /vlbi/uf001/uva//J1352-2745_S_map.mod
! Writing 417 model components to file: /vlbi/uf001/uva//J1352-2745_S_map.mod
wobs   /vlbi/uf001/uva//J1352-2745_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1352-2745_S_uvs.fits
wwins  /vlbi/uf001/uva//J1352-2745_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J1352-2745_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.214071 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000399382 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.559697 0.559697 1.11939 2.23879 4.47757 8.95515 17.9103 35.8206 71.6412
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.214 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  536.004 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1352-2745_S_dfm.log closed on Mon Jan 14 02:38:43 2019