! Started logfile: /vlbi/uf001/uva//J1343-1747_X_dfm.log on Mon Jan 14 02:33:55 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1343-1747_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1343-1747_X_uva.fits ! AN table 1: 71 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.816901 visibilities/baseline/integration-bin. ! Found source: J1343-1747 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 31320 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1343-1747_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.055468Jy sigma=23.269118 ! Fit after self-cal, rms=0.740914Jy sigma=16.218549 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6232 mas, bmaj=1.62 mas, bpa=-2.678 degrees ! Estimated noise=0.37202 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.178838 Jy ! Component: 100 - total flux cleaned = 0.227487 Jy ! Total flux subtracted in 100 components = 0.227487 Jy ! Clean residual min=-0.022583 max=0.066721 Jy/beam ! Clean residual mean=-0.000003 rms=0.004253 Jy/beam ! Combined flux in latest and established models = 0.227487 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.227487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.139245Jy sigma=2.993205 ! Fit after self-cal, rms=0.139221Jy sigma=2.992479 ! Inverting map ! Added new window around map position (3.2, 2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0562552 Jy ! Component: 100 - total flux cleaned = 0.0834022 Jy ! Total flux subtracted in 100 components = 0.0834022 Jy ! Clean residual min=-0.012997 max=0.030694 Jy/beam ! Clean residual mean=-0.000002 rms=0.002745 Jy/beam ! Combined flux in latest and established models = 0.310889 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.310889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105032Jy sigma=2.210583 ! Fit after self-cal, rms=0.102335Jy sigma=2.148508 ! Inverting map ! Added new window around map position (1.6, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0288846 Jy ! Component: 100 - total flux cleaned = 0.0461914 Jy ! Total flux subtracted in 100 components = 0.0461914 Jy ! Clean residual min=-0.011519 max=0.018717 Jy/beam ! Clean residual mean=-0.000003 rms=0.001927 Jy/beam ! Combined flux in latest and established models = 0.35708 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 25 components and 0.35708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085998Jy sigma=1.768261 ! Fit after self-cal, rms=0.084906Jy sigma=1.740874 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.015247 Jy ! Component: 100 - total flux cleaned = 0.026161 Jy ! Total flux subtracted in 100 components = 0.026161 Jy ! Clean residual min=-0.009213 max=0.013346 Jy/beam ! Clean residual mean=-0.000003 rms=0.001572 Jy/beam ! Combined flux in latest and established models = 0.383241 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 34 components and 0.383241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078406Jy sigma=1.583356 ! Fit after self-cal, rms=0.078090Jy sigma=1.575209 ! Inverting map ! Added new window around map position (-1.6, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114856 Jy ! Component: 100 - total flux cleaned = 0.0198676 Jy ! Total flux subtracted in 100 components = 0.0198676 Jy ! Clean residual min=-0.008371 max=0.008593 Jy/beam ! Clean residual mean=-0.000003 rms=0.001384 Jy/beam ! Combined flux in latest and established models = 0.403109 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 50 components and 0.403109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074325Jy sigma=1.488777 ! Fit after self-cal, rms=0.074277Jy sigma=1.488171 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8214 mas, bmaj=2.045 mas, bpa=-3.051 degrees ! Estimated noise=0.192614 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159046 Jy ! Component: 100 - total flux cleaned = 0.026483 Jy ! Component: 150 - total flux cleaned = 0.0342405 Jy ! Component: 200 - total flux cleaned = 0.0401361 Jy ! Total flux subtracted in 200 components = 0.0401361 Jy ! Clean residual min=-0.007799 max=0.009873 Jy/beam ! Clean residual mean=-0.000003 rms=0.001625 Jy/beam ! Combined flux in latest and established models = 0.443245 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 83 components and 0.443245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070214Jy sigma=1.382440 ! Fit after self-cal, rms=0.070145Jy sigma=1.380742 ! Inverting map ! Added new window around map position (-0.2, 3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00938784 Jy ! Component: 100 - total flux cleaned = 0.0149488 Jy ! Component: 150 - total flux cleaned = 0.0187562 Jy ! Component: 200 - total flux cleaned = 0.0207796 Jy ! Total flux subtracted in 200 components = 0.0207796 Jy ! Clean residual min=-0.006923 max=0.008186 Jy/beam ! Clean residual mean=-0.000000 rms=0.001287 Jy/beam ! Combined flux in latest and established models = 0.464024 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 103 components and 0.464025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068751Jy sigma=1.344440 ! Fit after self-cal, rms=0.068614Jy sigma=1.340873 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8214 x 2.045 at -3.051 degrees (North through East) ! Clean map min=-0.0062577 max=0.2462 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 1.03 KP 1.03 ! LA 0.97 MK 1.01 NL 1.05 OV 0.92 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 1.02 KP 1.03 ! LA 0.96 MK 1.02 NL 1.06 OV 0.91 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 1.00 KP 1.05 ! LA 0.96 MK 1.01 NL 1.04 OV 0.92 ! PT 0.96 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 1.03 KP 1.03 ! LA 0.97 MK 1.04 NL 1.04 OV 0.91 ! PT 0.96 SC 0.96 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 1.05 KP 1.04 ! LA 0.96 MK 0.99 NL 1.05 OV 0.92 ! PT 0.89 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 1.02 KP 1.04 ! LA 0.96 MK 1.01 NL 1.06 OV 0.92 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 1.04 KP 1.05 ! LA 0.97 MK 1.02 NL 1.03 OV 0.92 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 1.04 KP 1.04 ! LA 0.96 MK 1.02 NL 1.04 OV 0.93 ! PT 0.97 SC 0.96 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 1.02 KP 1.04 ! LA 0.97 MK 1.01 NL 1.06 OV 0.92 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 HN 1.03 KP 1.03 ! LA 0.98 MK 1.00 NL 1.04 OV 0.92 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 1.00 KP 1.04 ! LA 0.97 MK 1.02 NL 1.04 OV 0.92 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 1.03 KP 1.01 ! LA 0.97 MK 1.03 NL 1.05 OV 0.91 ! PT 0.98 SC 0.97 ! ! ! Fit before self-cal, rms=0.068614Jy sigma=1.340873 ! Fit after self-cal, rms=0.066338Jy sigma=1.276283 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8227 mas, bmaj=2.052 mas, bpa=-2.65 degrees ! Estimated noise=0.191734 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.8, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312785 Jy ! Component: 100 - total flux cleaned = 0.00429889 Jy ! Component: 150 - total flux cleaned = 0.00524866 Jy ! Component: 200 - total flux cleaned = 0.00576641 Jy ! Total flux subtracted in 200 components = 0.00576641 Jy ! Clean residual min=-0.003037 max=0.003476 Jy/beam ! Clean residual mean=0.000003 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.469791 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 121 components and 0.469791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065828Jy sigma=1.264574 ! Fit after self-cal, rms=0.065855Jy sigma=1.264059 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065855Jy sigma=1.264059 ! Fit after self-cal, rms=0.067505Jy sigma=1.230051 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8225 mas, bmaj=2.05 mas, bpa=-2.766 degrees ! Estimated noise=0.192181 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.05945e-05 Jy ! Component: 100 - total flux cleaned = -0.000164697 Jy ! Component: 150 - total flux cleaned = -0.000101073 Jy ! Component: 200 - total flux cleaned = -0.00010209 Jy ! Total flux subtracted in 200 components = -0.00010209 Jy ! Clean residual min=-0.002032 max=0.002351 Jy/beam ! Clean residual mean=0.000001 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.469689 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 132 components and 0.469689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067369Jy sigma=1.226540 ! Fit after self-cal, rms=0.067416Jy sigma=1.226331 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.2, 5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175604 Jy ! Component: 100 - total flux cleaned = 0.00213325 Jy ! Component: 150 - total flux cleaned = 0.00218775 Jy ! Component: 200 - total flux cleaned = 0.00209051 Jy ! Total flux subtracted in 200 components = 0.00209051 Jy ! Clean residual min=-0.001811 max=0.001802 Jy/beam ! Clean residual mean=0.000001 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.471779 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 153 components and 0.471779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067300Jy sigma=1.223576 ! Fit after self-cal, rms=0.067297Jy sigma=1.223467 ! Inverting map ! Added new window around map position (-3, 25.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014929 Jy ! Component: 100 - total flux cleaned = 0.0016282 Jy ! Component: 150 - total flux cleaned = 0.00174974 Jy ! Component: 200 - total flux cleaned = 0.00174931 Jy ! Total flux subtracted in 200 components = 0.00174931 Jy ! Clean residual min=-0.001816 max=0.001587 Jy/beam ! Clean residual mean=0.000001 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.473529 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 164 components and 0.473529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067234Jy sigma=1.221951 ! Fit after self-cal, rms=0.067232Jy sigma=1.221871 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067232Jy sigma=1.221871 ! Fit after self-cal, rms=0.068407Jy sigma=1.219311 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8219 mas, bmaj=2.049 mas, bpa=-2.719 degrees ! Estimated noise=0.19198 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000408757 Jy ! Component: 100 - total flux cleaned = -0.000257886 Jy ! Component: 150 - total flux cleaned = -0.000123584 Jy ! Component: 200 - total flux cleaned = -3.02121e-06 Jy ! Total flux subtracted in 200 components = -3.02121e-06 Jy ! Clean residual min=-0.001689 max=0.001454 Jy/beam ! Clean residual mean=0.000001 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.473526 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 177 components and 0.473526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068334Jy sigma=1.217840 ! Fit after self-cal, rms=0.068349Jy sigma=1.217794 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113248 Jy ! Component: 100 - total flux cleaned = 0.00011333 Jy ! Component: 150 - total flux cleaned = 0.000113576 Jy ! Component: 200 - total flux cleaned = 8.19622e-05 Jy ! Total flux subtracted in 200 components = 8.19622e-05 Jy ! Clean residual min=-0.001622 max=0.001359 Jy/beam ! Clean residual mean=0.000001 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.473607 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 183 components and 0.473607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068315Jy sigma=1.217057 ! Fit after self-cal, rms=0.068315Jy sigma=1.217028 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068315Jy sigma=1.217028 ! Fit after self-cal, rms=0.068410Jy sigma=1.216694 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.296 mas, bmaj=4.544 mas, bpa=7.882 degrees ! Estimated noise=0.252313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000302306 Jy ! Component: 100 - total flux cleaned = -0.000455489 Jy ! Component: 150 - total flux cleaned = -0.00057959 Jy ! Component: 200 - total flux cleaned = -0.000632807 Jy ! Total flux subtracted in 200 components = -0.000632807 Jy ! Clean residual min=-0.001471 max=0.001514 Jy/beam ! Clean residual mean=0.000003 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.472975 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 194 components and 0.472975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068387Jy sigma=1.216364 ! Fit after self-cal, rms=0.068389Jy sigma=1.216323 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.17265e-05 Jy ! Component: 100 - total flux cleaned = -0.000108294 Jy ! Component: 150 - total flux cleaned = -0.000148118 Jy ! Component: 200 - total flux cleaned = -0.000203441 Jy ! Total flux subtracted in 200 components = -0.000203441 Jy ! Clean residual min=-0.001412 max=0.001428 Jy/beam ! Clean residual mean=0.000003 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.472771 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 200 components and 0.472771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068384Jy sigma=1.216344 ! Fit after self-cal, rms=0.068384Jy sigma=1.216329 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8214 mas, bmaj=2.048 mas, bpa=-2.686 degrees ! Estimated noise=0.191697 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8214 x 2.048 at -2.686 degrees (North through East) ! Clean map min=-0.0014091 max=0.24653 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6218 mas, bmaj=1.614 mas, bpa=-2.277 degrees ! Estimated noise=0.371815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.180196 Jy ! Component: 100 - total flux cleaned = 0.248097 Jy ! Component: 150 - total flux cleaned = 0.29226 Jy ! Component: 200 - total flux cleaned = 0.323391 Jy ! Total flux subtracted in 200 components = 0.323391 Jy ! Clean residual min=-0.007123 max=0.017236 Jy/beam ! Clean residual mean=-0.000000 rms=0.001894 Jy/beam ! Combined flux in latest and established models = 0.323391 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.323391 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8214 mas, bmaj=2.048 mas, bpa=-2.686 degrees ! Estimated noise=0.191697 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.043096 Jy ! Component: 100 - total flux cleaned = 0.0690066 Jy ! Component: 150 - total flux cleaned = 0.0855094 Jy ! Component: 200 - total flux cleaned = 0.0972764 Jy ! Total flux subtracted in 200 components = 0.0972764 Jy ! Clean residual min=-0.003902 max=0.006916 Jy/beam ! Clean residual mean=-0.000001 rms=0.001340 Jy/beam ! Combined flux in latest and established models = 0.420667 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 48 components and 0.420667 Jy ! Inverting map ! Added new window around map position (2.4, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00894748 Jy ! Component: 100 - total flux cleaned = 0.0158965 Jy ! Component: 150 - total flux cleaned = 0.021374 Jy ! Component: 200 - total flux cleaned = 0.0258017 Jy ! Total flux subtracted in 200 components = 0.0258017 Jy ! Clean residual min=-0.002200 max=0.003185 Jy/beam ! Clean residual mean=0.000000 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.446469 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 101 components and 0.446469 Jy ! Inverting map ! Added new window around map position (9.4, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00374878 Jy ! Component: 100 - total flux cleaned = 0.0068347 Jy ! Component: 150 - total flux cleaned = 0.00944109 Jy ! Component: 200 - total flux cleaned = 0.0116565 Jy ! Total flux subtracted in 200 components = 0.0116565 Jy ! Clean residual min=-0.001629 max=0.002211 Jy/beam ! Clean residual mean=0.000001 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.458125 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 150 components and 0.458125 Jy ! Inverting map ! Added new window around map position (6.6, -11.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218985 Jy ! Component: 100 - total flux cleaned = 0.00386533 Jy ! Component: 150 - total flux cleaned = 0.00530968 Jy ! Component: 200 - total flux cleaned = 0.00658558 Jy ! Total flux subtracted in 200 components = 0.00658558 Jy ! Clean residual min=-0.001431 max=0.001496 Jy/beam ! Clean residual mean=0.000001 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.464711 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 181 components and 0.464711 Jy ! Inverting map ! Added new window around map position (-7.2, 15.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147698 Jy ! Component: 100 - total flux cleaned = 0.00255442 Jy ! Component: 150 - total flux cleaned = 0.00336307 Jy ! Component: 200 - total flux cleaned = 0.00406389 Jy ! Total flux subtracted in 200 components = 0.00406389 Jy ! Clean residual min=-0.001273 max=0.001118 Jy/beam ! Clean residual mean=0.000001 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.468775 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 206 components and 0.468775 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.296 mas, bmaj=4.544 mas, bpa=7.882 degrees ! Estimated noise=0.252313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132071 Jy ! Component: 100 - total flux cleaned = 0.00225662 Jy ! Component: 150 - total flux cleaned = 0.00291535 Jy ! Component: 200 - total flux cleaned = 0.00322028 Jy ! Total flux subtracted in 200 components = 0.00322028 Jy ! Clean residual min=-0.001476 max=0.001405 Jy/beam ! Clean residual mean=0.000002 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.471995 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000182266 Jy ! Component: 100 - total flux cleaned = 0.000329682 Jy ! Component: 150 - total flux cleaned = 0.000448555 Jy ! Component: 200 - total flux cleaned = 0.000542444 Jy ! Total flux subtracted in 200 components = 0.000542444 Jy ! Clean residual min=-0.001426 max=0.001404 Jy/beam ! Clean residual mean=0.000002 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.472538 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 244 components and 0.472538 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8214 mas, bmaj=2.048 mas, bpa=-2.686 degrees ! Estimated noise=0.191697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.7753e-05 Jy ! Component: 100 - total flux cleaned = 2.3391e-05 Jy ! Component: 150 - total flux cleaned = 7.18565e-05 Jy ! Component: 200 - total flux cleaned = 0.000117115 Jy ! Total flux subtracted in 200 components = 0.000117115 Jy ! Clean residual min=-0.001176 max=0.001128 Jy/beam ! Clean residual mean=0.000001 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.472655 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 264 components and 0.472655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068342Jy sigma=1.213897 ! Fit after self-cal, rms=0.068351Jy sigma=1.213702 wmodel J1343-1747_X_map.mod ! Writing 264 model components to file: J1343-1747_X_map.mod wobs J1343-1747_X_uvs.fits ! Writing UV FITS file: J1343-1747_X_uvs.fits wwins J1343-1747_X_map.win ! wwins: Wrote 12 windows to J1343-1747_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000403461 Jy ! Component: 100 - total flux cleaned = -0.000719057 Jy ! Component: 150 - total flux cleaned = -0.000944135 Jy ! Component: 200 - total flux cleaned = -0.00107138 Jy ! Component: 250 - total flux cleaned = -0.00123028 Jy ! Component: 300 - total flux cleaned = -0.00141936 Jy ! Component: 350 - total flux cleaned = -0.00155405 Jy ! Component: 400 - total flux cleaned = -0.00171931 Jy ! Component: 450 - total flux cleaned = -0.00192996 Jy ! Component: 500 - total flux cleaned = -0.00207325 Jy ! Component: 550 - total flux cleaned = -0.00223022 Jy ! Component: 600 - total flux cleaned = -0.00243108 Jy ! Component: 650 - total flux cleaned = -0.0025227 Jy ! Component: 700 - total flux cleaned = -0.00271827 Jy ! Component: 750 - total flux cleaned = -0.00282208 Jy ! Component: 800 - total flux cleaned = -0.00299754 Jy ! Component: 850 - total flux cleaned = -0.00311317 Jy ! Component: 900 - total flux cleaned = -0.00325608 Jy ! Component: 950 - total flux cleaned = -0.003397 Jy ! Component: 1000 - total flux cleaned = -0.00355048 Jy ! Component: 1050 - total flux cleaned = -0.00364726 Jy ! Component: 1100 - total flux cleaned = -0.00375653 Jy ! Component: 1150 - total flux cleaned = -0.0038376 Jy ! Component: 1200 - total flux cleaned = -0.00398492 Jy ! Component: 1250 - total flux cleaned = -0.00407785 Jy ! Component: 1300 - total flux cleaned = -0.00418304 Jy ! Component: 1350 - total flux cleaned = -0.00431338 Jy ! Component: 1400 - total flux cleaned = -0.00437791 Jy ! Component: 1450 - total flux cleaned = -0.00449311 Jy ! Component: 1500 - total flux cleaned = -0.00458209 Jy ! Component: 1550 - total flux cleaned = -0.00465787 Jy ! Component: 1600 - total flux cleaned = -0.00479532 Jy ! Component: 1650 - total flux cleaned = -0.00491918 Jy ! Component: 1700 - total flux cleaned = -0.00499297 Jy ! Component: 1750 - total flux cleaned = -0.00506618 Jy ! Component: 1800 - total flux cleaned = -0.00517537 Jy ! Component: 1850 - total flux cleaned = -0.00528356 Jy ! Component: 1900 - total flux cleaned = -0.00536706 Jy ! Component: 1950 - total flux cleaned = -0.00542638 Jy ! Component: 2000 - total flux cleaned = -0.00548531 Jy ! Component: 2050 - total flux cleaned = -0.00557878 Jy ! Component: 2100 - total flux cleaned = -0.00564837 Jy ! Component: 2150 - total flux cleaned = -0.00571763 Jy ! Component: 2200 - total flux cleaned = -0.00582057 Jy ! Component: 2250 - total flux cleaned = -0.00587746 Jy ! Component: 2300 - total flux cleaned = -0.00595645 Jy ! Component: 2350 - total flux cleaned = -0.00607976 Jy ! Component: 2400 - total flux cleaned = -0.00611318 Jy ! Component: 2450 - total flux cleaned = -0.00616844 Jy ! Component: 2500 - total flux cleaned = -0.00628924 Jy ! Component: 2550 - total flux cleaned = -0.00633288 Jy ! Component: 2600 - total flux cleaned = -0.0063546 Jy ! Component: 2650 - total flux cleaned = -0.00644091 Jy ! Component: 2700 - total flux cleaned = -0.00650522 Jy ! Component: 2750 - total flux cleaned = -0.00655835 Jy ! Component: 2800 - total flux cleaned = -0.0066535 Jy ! Component: 2850 - total flux cleaned = -0.00670615 Jy ! Component: 2900 - total flux cleaned = -0.00672709 Jy ! Component: 2950 - total flux cleaned = -0.00682049 Jy ! Component: 3000 - total flux cleaned = -0.00678951 Jy ! Component: 3050 - total flux cleaned = -0.00688198 Jy ! Component: 3100 - total flux cleaned = -0.00687189 Jy ! Component: 3150 - total flux cleaned = -0.00696323 Jy ! Component: 3200 - total flux cleaned = -0.00699357 Jy ! Component: 3250 - total flux cleaned = -0.00705383 Jy ! Component: 3300 - total flux cleaned = -0.00705379 Jy ! Component: 3350 - total flux cleaned = -0.00707365 Jy ! Component: 3400 - total flux cleaned = -0.00713289 Jy ! Component: 3450 - total flux cleaned = -0.00710346 Jy ! Component: 3500 - total flux cleaned = -0.00716201 Jy ! Component: 3550 - total flux cleaned = -0.00716202 Jy ! Component: 3600 - total flux cleaned = -0.00721998 Jy ! Component: 3650 - total flux cleaned = -0.00721994 Jy ! Component: 3700 - total flux cleaned = -0.00720092 Jy ! Component: 3750 - total flux cleaned = -0.00728647 Jy ! Component: 3800 - total flux cleaned = -0.00733383 Jy ! Component: 3850 - total flux cleaned = -0.00732444 Jy ! Component: 3900 - total flux cleaned = -0.00734314 Jy ! Component: 3950 - total flux cleaned = -0.00739899 Jy ! Component: 4000 - total flux cleaned = -0.0074175 Jy ! Component: 4050 - total flux cleaned = -0.00746364 Jy ! Total flux subtracted in 4096 components = -0.00748201 Jy ! Clean residual min=-0.000661 max=0.000531 Jy/beam ! Clean residual mean=0.000000 rms=0.000160 Jy/beam ! Combined flux in latest and established models = 0.465173 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 573 components and 0.465173 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1343-1747_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8214 x 2.048 at -2.686 degrees (North through East) ! Clean map min=-0.00089294 max=0.24816 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1343-1747_X_map.fits wmodel /vlbi/uf001/uva//J1343-1747_X_map.mod ! Writing 573 model components to file: /vlbi/uf001/uva//J1343-1747_X_map.mod wobs /vlbi/uf001/uva//J1343-1747_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1343-1747_X_uvs.fits wwins /vlbi/uf001/uva//J1343-1747_X_map.win ! wwins: Wrote 13 windows to /vlbi/uf001/uva//J1343-1747_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.248155 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000159318 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.192603 0.192603 0.385205 0.77041 1.54082 3.08164 6.16328 12.3266 24.6531 49.3063 98.6125 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.248 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1557.61 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1343-1747_X_dfm.log closed on Mon Jan 14 02:34:02 2019