! Started logfile: /vlbi/uf001/uva//J1343-1747_S_dfm.log on Mon Jan 14 02:33:49 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1343-1747_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1343-1747_S_uva.fits
! AN table 1: 71 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.816901 visibilities/baseline/integration-bin.
! Found source: J1343-1747
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7830 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1343-1747_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 114 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 114 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 114 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.183359Jy  sigma=19.908254
! Fit after  self-cal, rms=0.530195Jy  sigma=9.565785
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.486 mas, bmaj=6.502 mas, bpa=-3.797 degrees
! Estimated noise=0.646178 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.340738 Jy
! Component: 100  -  total flux cleaned = 0.467565 Jy
! Total flux subtracted in 100 components = 0.467565 Jy
! Clean residual min=-0.025136 max=0.081733 Jy/beam
! Clean residual mean=0.000080 rms=0.008443 Jy/beam
! Combined flux in latest and established models = 0.467565 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.467565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.217722Jy  sigma=3.393374
! Fit after  self-cal, rms=0.217026Jy  sigma=3.381396
! Inverting map 
! Added new window around map position (3, 2.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0877334 Jy
! Component: 100  -  total flux cleaned = 0.143349 Jy
! Total flux subtracted in 100 components = 0.143349 Jy
! Clean residual min=-0.017605 max=0.034928 Jy/beam
! Clean residual mean=0.000030 rms=0.005084 Jy/beam
! Combined flux in latest and established models = 0.610914 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 32 components and 0.610914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.143330Jy  sigma=2.218769
! Fit after  self-cal, rms=0.141921Jy  sigma=2.189429
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0417182 Jy
! Component: 100  -  total flux cleaned = 0.0703551 Jy
! Total flux subtracted in 100 components = 0.0703551 Jy
! Clean residual min=-0.015407 max=0.019502 Jy/beam
! Clean residual mean=0.000007 rms=0.003772 Jy/beam
! Combined flux in latest and established models = 0.681269 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 50 components and 0.681269 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.115874Jy  sigma=1.770261
! Fit after  self-cal, rms=0.115479Jy  sigma=1.762204
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.977 mas, bmaj=7.668 mas, bpa=-3.771 degrees
! Estimated noise=0.49854 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0386495 Jy
! Component: 100  -  total flux cleaned = 0.0619781 Jy
! Component: 150  -  total flux cleaned = 0.0767627 Jy
! Component: 200  -  total flux cleaned = 0.0862764 Jy
! Total flux subtracted in 200 components = 0.0862764 Jy
! Clean residual min=-0.014669 max=0.017455 Jy/beam
! Clean residual mean=-0.000026 rms=0.003345 Jy/beam
! Combined flux in latest and established models = 0.767546 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 81 components and 0.767546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099782Jy  sigma=1.500457
! Fit after  self-cal, rms=0.099524Jy  sigma=1.495116
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.977 x 7.668 at -3.771 degrees (North through East)
! Clean map  min=-0.014305  max=0.45257 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.89     HN        1.08     KP        1.01     
!   LA        0.94     MK        0.99     NL        1.05     OV        0.99     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.90     HN        1.12     KP        1.01     
!   LA        0.94     MK        1.01     NL        1.11     OV        0.99     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.92     HN        1.13     KP        1.02     
!   LA        0.95     MK        1.01     NL        1.09     OV        1.01     
!   PT        1.00     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.099524Jy  sigma=1.495116
! Fit after  self-cal, rms=0.087196Jy  sigma=1.311557
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.987 mas, bmaj=7.666 mas, bpa=-3.319 degrees
! Estimated noise=0.496243 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00666644 Jy
! Component: 100  -  total flux cleaned = -0.00741382 Jy
! Component: 150  -  total flux cleaned = -0.00752198 Jy
! Component: 200  -  total flux cleaned = -0.00762174 Jy
! Total flux subtracted in 200 components = -0.00762174 Jy
! Clean residual min=-0.007645 max=0.009620 Jy/beam
! Clean residual mean=-0.000010 rms=0.002019 Jy/beam
! Combined flux in latest and established models = 0.759924 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 98 components and 0.759924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086541Jy  sigma=1.299806
! Fit after  self-cal, rms=0.086532Jy  sigma=1.298434
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086532Jy  sigma=1.298434
! Fit after  self-cal, rms=0.077693Jy  sigma=1.172650
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.986 mas, bmaj=7.666 mas, bpa=-3.402 degrees
! Estimated noise=0.494565 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00135794 Jy
! Component: 100  -  total flux cleaned = -0.0015621 Jy
! Component: 150  -  total flux cleaned = -0.00155851 Jy
! Component: 200  -  total flux cleaned = -0.00155913 Jy
! Total flux subtracted in 200 components = -0.00155913 Jy
! Clean residual min=-0.003915 max=0.003734 Jy/beam
! Clean residual mean=-0.000001 rms=0.000858 Jy/beam
! Combined flux in latest and established models = 0.758365 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 105 components and 0.758365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077483Jy  sigma=1.168030
! Fit after  self-cal, rms=0.077520Jy  sigma=1.167168
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000342211 Jy
! Component: 100  -  total flux cleaned = -0.000569485 Jy
! Component: 150  -  total flux cleaned = -0.000566759 Jy
! Component: 200  -  total flux cleaned = -0.000566512 Jy
! Total flux subtracted in 200 components = -0.000566512 Jy
! Clean residual min=-0.003475 max=0.003539 Jy/beam
! Clean residual mean=-0.000001 rms=0.000821 Jy/beam
! Combined flux in latest and established models = 0.757799 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 108 components and 0.757799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077410Jy  sigma=1.164656
! Fit after  self-cal, rms=0.077389Jy  sigma=1.164195
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077389Jy  sigma=1.164195
! Fit after  self-cal, rms=0.077860Jy  sigma=1.159185
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.986 mas, bmaj=7.671 mas, bpa=-3.369 degrees
! Estimated noise=0.494469 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000237067 Jy
! Component: 100  -  total flux cleaned = -0.000442766 Jy
! Component: 150  -  total flux cleaned = -0.000556808 Jy
! Component: 200  -  total flux cleaned = -0.000555149 Jy
! Total flux subtracted in 200 components = -0.000555149 Jy
! Clean residual min=-0.003311 max=0.003001 Jy/beam
! Clean residual mean=0.000001 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 0.757243 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 114 components and 0.757243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077761Jy  sigma=1.157286
! Fit after  self-cal, rms=0.077753Jy  sigma=1.156889
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.89981e-05 Jy
! Component: 100  -  total flux cleaned = -0.000149281 Jy
! Component: 150  -  total flux cleaned = -0.000150856 Jy
! Component: 200  -  total flux cleaned = -0.000107141 Jy
! Total flux subtracted in 200 components = -0.000107141 Jy
! Clean residual min=-0.003112 max=0.002814 Jy/beam
! Clean residual mean=0.000001 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.757136 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 114 components and 0.757136 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077687Jy  sigma=1.155676
! Fit after  self-cal, rms=0.077676Jy  sigma=1.155399
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077676Jy  sigma=1.155399
! Fit after  self-cal, rms=0.077756Jy  sigma=1.155205
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.557 mas, bmaj=15.11 mas, bpa=4.512 degrees
! Estimated noise=0.699033 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000430245 Jy
! Component: 100  -  total flux cleaned = 0.000457258 Jy
! Component: 150  -  total flux cleaned = 0.000497718 Jy
! Component: 200  -  total flux cleaned = 0.00051386 Jy
! Total flux subtracted in 200 components = 0.00051386 Jy
! Clean residual min=-0.002579 max=0.002569 Jy/beam
! Clean residual mean=0.000001 rms=0.000737 Jy/beam
! Combined flux in latest and established models = 0.75765 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 122 components and 0.75765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077746Jy  sigma=1.154951
! Fit after  self-cal, rms=0.077743Jy  sigma=1.154856
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.6535e-06 Jy
! Component: 100  -  total flux cleaned = -3.87236e-06 Jy
! Component: 150  -  total flux cleaned = -2.31538e-05 Jy
! Component: 200  -  total flux cleaned = -3.87936e-05 Jy
! Total flux subtracted in 200 components = -3.87936e-05 Jy
! Clean residual min=-0.002590 max=0.002575 Jy/beam
! Clean residual mean=0.000001 rms=0.000735 Jy/beam
! Combined flux in latest and established models = 0.757611 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 129 components and 0.757611 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077738Jy  sigma=1.154676
! Fit after  self-cal, rms=0.077733Jy  sigma=1.154594
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.987 mas, bmaj=7.674 mas, bpa=-3.347 degrees
! Estimated noise=0.494746 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.987 x 7.674 at -3.347 degrees (North through East)
! Clean map  min=-0.0028643  max=0.45119 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.485 mas, bmaj=6.498 mas, bpa=-3.344 degrees
! Estimated noise=0.646855 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.341986 Jy
! Component: 100  -  total flux cleaned = 0.479748 Jy
! Component: 150  -  total flux cleaned = 0.564408 Jy
! Component: 200  -  total flux cleaned = 0.620588 Jy
! Total flux subtracted in 200 components = 0.620588 Jy
! Clean residual min=-0.011243 max=0.030339 Jy/beam
! Clean residual mean=0.000047 rms=0.003526 Jy/beam
! Combined flux in latest and established models = 0.620588 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.620588 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.987 mas, bmaj=7.674 mas, bpa=-3.347 degrees
! Estimated noise=0.494746 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0559747 Jy
! Component: 100  -  total flux cleaned = 0.0867648 Jy
! Component: 150  -  total flux cleaned = 0.104699 Jy
! Component: 200  -  total flux cleaned = 0.115727 Jy
! Total flux subtracted in 200 components = 0.115727 Jy
! Clean residual min=-0.003548 max=0.008045 Jy/beam
! Clean residual mean=0.000005 rms=0.001114 Jy/beam
! Combined flux in latest and established models = 0.736316 Jy
! Adding 84 model components to the UV plane model.
! The established model now contains 99 components and 0.736316 Jy
! Inverting map 
! Added new window around map position (-3.5, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00805418 Jy
! Component: 100  -  total flux cleaned = 0.0131286 Jy
! Component: 150  -  total flux cleaned = 0.0165151 Jy
! Component: 200  -  total flux cleaned = 0.0173425 Jy
! Total flux subtracted in 200 components = 0.0173425 Jy
! Clean residual min=-0.003008 max=0.003445 Jy/beam
! Clean residual mean=0.000001 rms=0.000710 Jy/beam
! Combined flux in latest and established models = 0.753658 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 128 components and 0.753658 Jy
! Inverting map 
! Added new window around map position (5.5, 11.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00222699 Jy
! Component: 100  -  total flux cleaned = 0.00281118 Jy
! Component: 150  -  total flux cleaned = 0.00303165 Jy
! Component: 200  -  total flux cleaned = 0.00316668 Jy
! Total flux subtracted in 200 components = 0.00316668 Jy
! Clean residual min=-0.002958 max=0.002593 Jy/beam
! Clean residual mean=0.000001 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.756825 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 144 components and 0.756825 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.557 mas, bmaj=15.11 mas, bpa=4.512 degrees
! Estimated noise=0.699033 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144208 Jy
! Component: 100  -  total flux cleaned = 0.0016946 Jy
! Component: 150  -  total flux cleaned = 0.0018327 Jy
! Component: 200  -  total flux cleaned = 0.00196395 Jy
! Total flux subtracted in 200 components = 0.00196395 Jy
! Clean residual min=-0.002417 max=0.002398 Jy/beam
! Clean residual mean=0.000001 rms=0.000727 Jy/beam
! Combined flux in latest and established models = 0.758789 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.84784e-05 Jy
! Component: 100  -  total flux cleaned = 7.79341e-05 Jy
! Component: 150  -  total flux cleaned = 9.201e-05 Jy
! Component: 200  -  total flux cleaned = 0.000106112 Jy
! Total flux subtracted in 200 components = 0.000106112 Jy
! Clean residual min=-0.002421 max=0.002400 Jy/beam
! Clean residual mean=0.000001 rms=0.000726 Jy/beam
! Combined flux in latest and established models = 0.758895 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 165 components and 0.758895 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.987 mas, bmaj=7.674 mas, bpa=-3.347 degrees
! Estimated noise=0.494746 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000489276 Jy
! Component: 100  -  total flux cleaned = -0.000492154 Jy
! Component: 150  -  total flux cleaned = -0.000492363 Jy
! Component: 200  -  total flux cleaned = -0.000447177 Jy
! Total flux subtracted in 200 components = -0.000447177 Jy
! Clean residual min=-0.002841 max=0.002490 Jy/beam
! Clean residual mean=0.000000 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.758448 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 182 components and 0.758448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077473Jy  sigma=1.149785
! Fit after  self-cal, rms=0.077441Jy  sigma=1.149125
wmodel J1343-1747_S_map.mod
! Writing 182 model components to file: J1343-1747_S_map.mod
wobs   J1343-1747_S_uvs.fits
! Writing UV FITS file: J1343-1747_S_uvs.fits
wwins  J1343-1747_S_map.win
! wwins: Wrote 4 windows to J1343-1747_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000256176 Jy
! Component: 100  -  total flux cleaned = -0.000476574 Jy
! Component: 150  -  total flux cleaned = -0.000393148 Jy
! Component: 200  -  total flux cleaned = -0.000234966 Jy
! Component: 250  -  total flux cleaned = -0.000158191 Jy
! Component: 300  -  total flux cleaned = -4.5729e-05 Jy
! Component: 350  -  total flux cleaned = -4.52792e-05 Jy
! Component: 400  -  total flux cleaned = 6.02273e-05 Jy
! Component: 450  -  total flux cleaned = 2.46668e-05 Jy
! Component: 500  -  total flux cleaned = -4.24755e-05 Jy
! Component: 550  -  total flux cleaned = -7.46621e-05 Jy
! Component: 600  -  total flux cleaned = -0.000169997 Jy
! Component: 650  -  total flux cleaned = -0.00020156 Jy
! Component: 700  -  total flux cleaned = -0.00026311 Jy
! Component: 750  -  total flux cleaned = -0.000263114 Jy
! Component: 800  -  total flux cleaned = -0.000263416 Jy
! Component: 850  -  total flux cleaned = -0.000350658 Jy
! Component: 900  -  total flux cleaned = -0.000263991 Jy
! Component: 950  -  total flux cleaned = -0.000207403 Jy
! Component: 1000  -  total flux cleaned = -0.000151219 Jy
! Component: 1050  -  total flux cleaned = -4.1686e-05 Jy
! Component: 1100  -  total flux cleaned = -4.24713e-05 Jy
! Component: 1150  -  total flux cleaned = 1.05344e-05 Jy
! Component: 1200  -  total flux cleaned = -9.41651e-05 Jy
! Component: 1250  -  total flux cleaned = 9.91668e-06 Jy
! Component: 1300  -  total flux cleaned = 0.000112341 Jy
! Component: 1350  -  total flux cleaned = 6.1581e-05 Jy
! Component: 1400  -  total flux cleaned = 8.66671e-05 Jy
! Component: 1450  -  total flux cleaned = 6.2798e-05 Jy
! Component: 1500  -  total flux cleaned = 0.000111829 Jy
! Component: 1550  -  total flux cleaned = 0.000208734 Jy
! Component: 1600  -  total flux cleaned = 0.000233149 Jy
! Component: 1650  -  total flux cleaned = 0.000398118 Jy
! Component: 1700  -  total flux cleaned = 0.000374837 Jy
! Component: 1750  -  total flux cleaned = 0.000421026 Jy
! Component: 1800  -  total flux cleaned = 0.000466853 Jy
! Component: 1850  -  total flux cleaned = 0.000556778 Jy
! Component: 1900  -  total flux cleaned = 0.000600972 Jy
! Component: 1950  -  total flux cleaned = 0.000623 Jy
! Component: 2000  -  total flux cleaned = 0.000622833 Jy
! Component: 2050  -  total flux cleaned = 0.000623041 Jy
! Component: 2100  -  total flux cleaned = 0.000708458 Jy
! Component: 2150  -  total flux cleaned = 0.000665989 Jy
! Component: 2200  -  total flux cleaned = 0.000687028 Jy
! Component: 2250  -  total flux cleaned = 0.000666381 Jy
! Component: 2300  -  total flux cleaned = 0.000707687 Jy
! Component: 2350  -  total flux cleaned = 0.000747992 Jy
! Component: 2400  -  total flux cleaned = 0.000727408 Jy
! Component: 2450  -  total flux cleaned = 0.000667488 Jy
! Component: 2500  -  total flux cleaned = 0.000706683 Jy
! Component: 2550  -  total flux cleaned = 0.000628403 Jy
! Component: 2600  -  total flux cleaned = 0.000628349 Jy
! Component: 2650  -  total flux cleaned = 0.000590206 Jy
! Component: 2700  -  total flux cleaned = 0.00062837 Jy
! Component: 2750  -  total flux cleaned = 0.000628316 Jy
! Component: 2800  -  total flux cleaned = 0.000665471 Jy
! Component: 2850  -  total flux cleaned = 0.0005914 Jy
! Component: 2900  -  total flux cleaned = 0.000554733 Jy
! Component: 2950  -  total flux cleaned = 0.000518654 Jy
! Component: 3000  -  total flux cleaned = 0.000500605 Jy
! Component: 3050  -  total flux cleaned = 0.000536191 Jy
! Component: 3100  -  total flux cleaned = 0.000518222 Jy
! Component: 3150  -  total flux cleaned = 0.00044769 Jy
! Component: 3200  -  total flux cleaned = 0.000430451 Jy
! Component: 3250  -  total flux cleaned = 0.000378477 Jy
! Component: 3300  -  total flux cleaned = 0.000344458 Jy
! Component: 3350  -  total flux cleaned = 0.000412536 Jy
! Component: 3400  -  total flux cleaned = 0.000361969 Jy
! Component: 3450  -  total flux cleaned = 0.000412557 Jy
! Component: 3500  -  total flux cleaned = 0.000445855 Jy
! Component: 3550  -  total flux cleaned = 0.000280582 Jy
! Component: 3600  -  total flux cleaned = 0.000362765 Jy
! Component: 3650  -  total flux cleaned = 0.000248953 Jy
! Component: 3700  -  total flux cleaned = 0.000297533 Jy
! Component: 3750  -  total flux cleaned = 0.000201336 Jy
! Component: 3800  -  total flux cleaned = 0.000201234 Jy
! Component: 3850  -  total flux cleaned = 0.000169491 Jy
! Component: 3900  -  total flux cleaned = 0.000106619 Jy
! Component: 3950  -  total flux cleaned = 4.41854e-05 Jy
! Component: 4000  -  total flux cleaned = 4.41267e-05 Jy
! Component: 4050  -  total flux cleaned = 4.38538e-05 Jy
! Total flux subtracted in 4096 components = -3.27898e-05 Jy
! Clean residual min=-0.000923 max=0.001066 Jy/beam
! Clean residual mean=-0.000000 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.758415 Jy
keep
! Adding 306 model components to the UV plane model.
! The established model now contains 488 components and 0.758416 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1343-1747_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.987 x 7.674 at -3.347 degrees (North through East)
! Clean map  min=-0.0021029  max=0.45255 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1343-1747_S_map.fits
wmodel /vlbi/uf001/uva//J1343-1747_S_map.mod
! Writing 488 model components to file: /vlbi/uf001/uva//J1343-1747_S_map.mod
wobs   /vlbi/uf001/uva//J1343-1747_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1343-1747_S_uvs.fits
wwins  /vlbi/uf001/uva//J1343-1747_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J1343-1747_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.452546 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000278327 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.184507 0.184507 0.369015 0.73803 1.47606 2.95212 5.90424 11.8085 23.617 47.2339 94.4678
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.452 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1625.95 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1343-1747_S_dfm.log closed on Mon Jan 14 02:33:54 2019