! Started logfile: /vlbi/uf001/uva//J1343+6855_X_dfm.log on Mon Jan 14 02:33:39 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J1343+6855_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1343+6855_X_uva.fits
! AN table 1: 116 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.994444 visibilities/baseline/integration-bin.
! Found source: J1343+6855
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 62292 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1343+6855_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003562Jy  sigma=23.763801
! Fit after  self-cal, rms=0.925530Jy  sigma=21.900968
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7651 mas, bmaj=0.9225 mas, bpa=89.94 degrees
! Estimated noise=0.279743 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0562359 Jy
! Component: 100  -  total flux cleaned = 0.0694627 Jy
! Total flux subtracted in 100 components = 0.0694627 Jy
! Clean residual min=-0.002191 max=0.005189 Jy/beam
! Clean residual mean=0.000004 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.0694627 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0694627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056116Jy  sigma=1.273788
! Fit after  self-cal, rms=0.055804Jy  sigma=1.266827
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00559159 Jy
! Component: 100  -  total flux cleaned = 0.00837513 Jy
! Total flux subtracted in 100 components = 0.00837513 Jy
! Clean residual min=-0.001985 max=0.004500 Jy/beam
! Clean residual mean=0.000003 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.0778378 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 9 components and 0.0778378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055044Jy  sigma=1.248791
! Fit after  self-cal, rms=0.055050Jy  sigma=1.248697
! Inverting map 
! Added new window around map position (-0.4, -3.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0040649 Jy
! Component: 100  -  total flux cleaned = 0.00595606 Jy
! Total flux subtracted in 100 components = 0.00595606 Jy
! Clean residual min=-0.002104 max=0.002036 Jy/beam
! Clean residual mean=0.000003 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.0837939 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 14 components and 0.0837939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054629Jy  sigma=1.238031
! Fit after  self-cal, rms=0.054584Jy  sigma=1.236935
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.021 mas, bmaj=1.23 mas, bpa=-89.04 degrees
! Estimated noise=0.123241 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.4, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00361844 Jy
! Component: 100  -  total flux cleaned = 0.00596589 Jy
! Component: 150  -  total flux cleaned = 0.0077038 Jy
! Component: 200  -  total flux cleaned = 0.00901181 Jy
! Total flux subtracted in 200 components = 0.00901181 Jy
! Clean residual min=-0.001537 max=0.002171 Jy/beam
! Clean residual mean=0.000008 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.0928057 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 48 components and 0.0928057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054301Jy  sigma=1.229777
! Fit after  self-cal, rms=0.054267Jy  sigma=1.229015
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.021 x 1.23 at -89.04 degrees (North through East)
! Clean map  min=-0.0013083  max=0.074565 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.01     HN        0.95     KP        0.99     
!   LA        0.97     MK        1.03     NL        1.12     OV        0.92     
!   PT        0.92     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.01     HN        0.97     KP        0.97     
!   LA        1.00     MK        1.04     NL        1.10     OV        0.93     
!   PT        0.91     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.99     HN        0.92     KP        0.98     
!   LA        1.01     MK        1.01     NL        1.13     OV        0.92     
!   PT        0.92     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.00     HN        0.99     KP        0.99     
!   LA        0.96     MK        1.02     NL        1.11     OV        0.94     
!   PT        0.89     SC        0.94     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.00     HN        0.95     KP        1.00     
!   LA        0.97     MK        1.02     NL        1.09     OV        0.93     
!   PT        0.91     SC        0.95     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.02     HN        0.94     KP        1.05     
!   LA        0.97     MK        1.01     NL        1.11     OV        0.92     
!   PT        0.89     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.04     HN        0.95     KP        0.98     
!   LA        0.99     MK        1.04     NL        1.13     OV        0.92     
!   PT        0.91     SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.99     HN        0.96     KP        0.99     
!   LA        1.01     MK        1.04     NL        1.14     OV        0.91     
!   PT        0.92     SC        0.94     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.03     HN        0.96     KP        1.00     
!   LA        0.98     MK        1.01     NL        1.14     OV        0.92     
!   PT        0.91     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.01     HN        0.97     KP        1.01     
!   LA        0.98     MK        1.00     NL        1.15     OV        0.94     
!   PT        0.90     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.01     HN        0.97     KP        0.99     
!   LA        0.97     MK        1.04     NL        1.10     OV        0.92     
!   PT        0.93     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.00     HN        0.98     KP        1.01     
!   LA        1.01     MK        1.01     NL        1.09     OV        0.94     
!   PT        0.94     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.054267Jy  sigma=1.229015
! Fit after  self-cal, rms=0.053072Jy  sigma=1.218588
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.022 mas, bmaj=1.23 mas, bpa=-90 degrees
! Estimated noise=0.122081 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.2, -4.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00137602 Jy
! Component: 100  -  total flux cleaned = 0.00141727 Jy
! Component: 150  -  total flux cleaned = 0.00130753 Jy
! Component: 200  -  total flux cleaned = 0.00123909 Jy
! Total flux subtracted in 200 components = 0.00123909 Jy
! Clean residual min=-0.000729 max=0.000720 Jy/beam
! Clean residual mean=0.000003 rms=0.000170 Jy/beam
! Combined flux in latest and established models = 0.0940448 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 64 components and 0.0940448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053022Jy  sigma=1.217314
! Fit after  self-cal, rms=0.053036Jy  sigma=1.216921
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053036Jy  sigma=1.216921
! Fit after  self-cal, rms=0.053251Jy  sigma=1.214433
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.021 mas, bmaj=1.228 mas, bpa=89.73 degrees
! Estimated noise=0.122185 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000350049 Jy
! Component: 100  -  total flux cleaned = 0.000389013 Jy
! Component: 150  -  total flux cleaned = 0.000402649 Jy
! Component: 200  -  total flux cleaned = 0.000402699 Jy
! Total flux subtracted in 200 components = 0.000402699 Jy
! Clean residual min=-0.000609 max=0.000611 Jy/beam
! Clean residual mean=0.000002 rms=0.000147 Jy/beam
! Combined flux in latest and established models = 0.0944475 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 77 components and 0.0944475 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053237Jy  sigma=1.214128
! Fit after  self-cal, rms=0.053247Jy  sigma=1.214043
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.57078e-05 Jy
! Component: 100  -  total flux cleaned = 8.53505e-05 Jy
! Component: 150  -  total flux cleaned = 7.50118e-05 Jy
! Component: 200  -  total flux cleaned = 7.49036e-05 Jy
! Total flux subtracted in 200 components = 7.49036e-05 Jy
! Clean residual min=-0.000594 max=0.000603 Jy/beam
! Clean residual mean=0.000002 rms=0.000145 Jy/beam
! Combined flux in latest and established models = 0.0945224 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 85 components and 0.0945224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053242Jy  sigma=1.213937
! Fit after  self-cal, rms=0.053242Jy  sigma=1.213927
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053242Jy  sigma=1.213927
! Fit after  self-cal, rms=0.053268Jy  sigma=1.213851
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.02 mas, bmaj=1.227 mas, bpa=89.66 degrees
! Estimated noise=0.122177 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.89659e-05 Jy
! Component: 100  -  total flux cleaned = 0.000110484 Jy
! Component: 150  -  total flux cleaned = 0.000120096 Jy
! Component: 200  -  total flux cleaned = 0.000120242 Jy
! Total flux subtracted in 200 components = 0.000120242 Jy
! Clean residual min=-0.000599 max=0.000597 Jy/beam
! Clean residual mean=0.000002 rms=0.000142 Jy/beam
! Combined flux in latest and established models = 0.0946426 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 88 components and 0.0946426 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053264Jy  sigma=1.213763
! Fit after  self-cal, rms=0.053266Jy  sigma=1.213756
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.76319e-05 Jy
! Component: 100  -  total flux cleaned = 2.76138e-05 Jy
! Component: 150  -  total flux cleaned = 1.98543e-05 Jy
! Component: 200  -  total flux cleaned = 1.26659e-05 Jy
! Total flux subtracted in 200 components = 1.26659e-05 Jy
! Clean residual min=-0.000593 max=0.000594 Jy/beam
! Clean residual mean=0.000002 rms=0.000141 Jy/beam
! Combined flux in latest and established models = 0.0946553 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 94 components and 0.0946553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053264Jy  sigma=1.213714
! Fit after  self-cal, rms=0.053264Jy  sigma=1.213711
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053264Jy  sigma=1.213711
! Fit after  self-cal, rms=0.053264Jy  sigma=1.213698
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.243 mas, bmaj=2.679 mas, bpa=80.93 degrees
! Estimated noise=0.157064 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.76954e-05 Jy
! Component: 100  -  total flux cleaned = 6.1167e-05 Jy
! Component: 150  -  total flux cleaned = 4.96436e-05 Jy
! Component: 200  -  total flux cleaned = 4.0069e-05 Jy
! Total flux subtracted in 200 components = 4.0069e-05 Jy
! Clean residual min=-0.000741 max=0.000648 Jy/beam
! Clean residual mean=0.000004 rms=0.000180 Jy/beam
! Combined flux in latest and established models = 0.0946954 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 109 components and 0.0946954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053264Jy  sigma=1.213678
! Fit after  self-cal, rms=0.053264Jy  sigma=1.213678
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.36988e-05 Jy
! Component: 100  -  total flux cleaned = 1.20065e-06 Jy
! Component: 150  -  total flux cleaned = -6.29433e-06 Jy
! Component: 200  -  total flux cleaned = -1.6843e-05 Jy
! Total flux subtracted in 200 components = -1.6843e-05 Jy
! Clean residual min=-0.000748 max=0.000648 Jy/beam
! Clean residual mean=0.000004 rms=0.000180 Jy/beam
! Combined flux in latest and established models = 0.0946785 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 114 components and 0.0946785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053264Jy  sigma=1.213678
! Fit after  self-cal, rms=0.053263Jy  sigma=1.213677
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.019 mas, bmaj=1.226 mas, bpa=89.68 degrees
! Estimated noise=0.122212 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.019 x 1.226 at 89.68 degrees (North through East)
! Clean map  min=-0.00052526  max=0.073915 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7624 mas, bmaj=0.9194 mas, bpa=88.64 degrees
! Estimated noise=0.277035 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.055689 Jy
! Component: 100  -  total flux cleaned = 0.0691312 Jy
! Component: 150  -  total flux cleaned = 0.0758227 Jy
! Component: 200  -  total flux cleaned = 0.0801661 Jy
! Total flux subtracted in 200 components = 0.0801661 Jy
! Clean residual min=-0.001578 max=0.002318 Jy/beam
! Clean residual mean=0.000002 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.0801661 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0801661 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.019 mas, bmaj=1.226 mas, bpa=89.68 degrees
! Estimated noise=0.122212 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00467355 Jy
! Component: 100  -  total flux cleaned = 0.00753944 Jy
! Component: 150  -  total flux cleaned = 0.0095388 Jy
! Component: 200  -  total flux cleaned = 0.0109806 Jy
! Total flux subtracted in 200 components = 0.0109806 Jy
! Clean residual min=-0.000644 max=0.000817 Jy/beam
! Clean residual mean=0.000003 rms=0.000167 Jy/beam
! Combined flux in latest and established models = 0.0911467 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 45 components and 0.0911467 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010585 Jy
! Component: 100  -  total flux cleaned = 0.00185 Jy
! Component: 150  -  total flux cleaned = 0.00244545 Jy
! Component: 200  -  total flux cleaned = 0.00289898 Jy
! Total flux subtracted in 200 components = 0.00289898 Jy
! Clean residual min=-0.000582 max=0.000638 Jy/beam
! Clean residual mean=0.000002 rms=0.000144 Jy/beam
! Combined flux in latest and established models = 0.0940457 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 66 components and 0.0940457 Jy
! Inverting map 
! Added new window around map position (43.4, -6.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000609049 Jy
! Component: 100  -  total flux cleaned = 0.000778417 Jy
! Component: 150  -  total flux cleaned = 0.000885987 Jy
! Component: 200  -  total flux cleaned = 0.000948236 Jy
! Total flux subtracted in 200 components = 0.000948236 Jy
! Clean residual min=-0.000556 max=0.000555 Jy/beam
! Clean residual mean=0.000001 rms=0.000140 Jy/beam
! Combined flux in latest and established models = 0.0949939 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 84 components and 0.0949939 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.243 mas, bmaj=2.679 mas, bpa=80.93 degrees
! Estimated noise=0.157064 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000306563 Jy
! Component: 100  -  total flux cleaned = 0.000342955 Jy
! Component: 150  -  total flux cleaned = 0.000380609 Jy
! Component: 200  -  total flux cleaned = 0.000406186 Jy
! Total flux subtracted in 200 components = 0.000406186 Jy
! Clean residual min=-0.000715 max=0.000665 Jy/beam
! Clean residual mean=0.000002 rms=0.000172 Jy/beam
! Combined flux in latest and established models = 0.0954001 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.47256e-06 Jy
! Component: 100  -  total flux cleaned = 1.55619e-05 Jy
! Component: 150  -  total flux cleaned = 2.01896e-05 Jy
! Component: 200  -  total flux cleaned = 2.45237e-05 Jy
! Total flux subtracted in 200 components = 2.45237e-05 Jy
! Clean residual min=-0.000723 max=0.000665 Jy/beam
! Clean residual mean=0.000002 rms=0.000172 Jy/beam
! Combined flux in latest and established models = 0.0954246 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 114 components and 0.0954246 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.019 mas, bmaj=1.226 mas, bpa=89.68 degrees
! Estimated noise=0.122212 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.18699e-06 Jy
! Component: 100  -  total flux cleaned = -7.31139e-07 Jy
! Component: 150  -  total flux cleaned = -1.01647e-05 Jy
! Component: 200  -  total flux cleaned = -1.88782e-05 Jy
! Total flux subtracted in 200 components = -1.88782e-05 Jy
! Clean residual min=-0.000558 max=0.000562 Jy/beam
! Clean residual mean=0.000001 rms=0.000137 Jy/beam
! Combined flux in latest and established models = 0.0954057 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 124 components and 0.0954057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053258Jy  sigma=1.213586
! Fit after  self-cal, rms=0.053257Jy  sigma=1.213553
wmodel J1343+6855_X_map.mod
! Writing 124 model components to file: J1343+6855_X_map.mod
wobs   J1343+6855_X_uvs.fits
! Writing UV FITS file: J1343+6855_X_uvs.fits
wwins  J1343+6855_X_map.win
! wwins: Wrote 5 windows to J1343+6855_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 3.02519e-05 Jy
! Component: 100  -  total flux cleaned = 0.000119814 Jy
! Component: 150  -  total flux cleaned = 0.000158523 Jy
! Component: 200  -  total flux cleaned = 0.000139831 Jy
! Component: 250  -  total flux cleaned = 0.000167469 Jy
! Component: 300  -  total flux cleaned = 0.00018557 Jy
! Component: 350  -  total flux cleaned = 0.000194451 Jy
! Component: 400  -  total flux cleaned = 0.000185788 Jy
! Component: 450  -  total flux cleaned = 0.000220418 Jy
! Component: 500  -  total flux cleaned = 0.000203178 Jy
! Component: 550  -  total flux cleaned = 0.000186351 Jy
! Component: 600  -  total flux cleaned = 0.00017803 Jy
! Component: 650  -  total flux cleaned = 0.000153186 Jy
! Component: 700  -  total flux cleaned = 0.000136796 Jy
! Component: 750  -  total flux cleaned = 8.00483e-05 Jy
! Component: 800  -  total flux cleaned = 7.2107e-05 Jy
! Component: 850  -  total flux cleaned = 6.41347e-05 Jy
! Component: 900  -  total flux cleaned = 3.25486e-05 Jy
! Component: 950  -  total flux cleaned = 1.68612e-05 Jy
! Component: 1000  -  total flux cleaned = -6.38972e-06 Jy
! Component: 1050  -  total flux cleaned = -2.1725e-05 Jy
! Component: 1100  -  total flux cleaned = -2.94244e-05 Jy
! Component: 1150  -  total flux cleaned = 9.29824e-07 Jy
! Component: 1200  -  total flux cleaned = -5.18541e-05 Jy
! Component: 1250  -  total flux cleaned = -5.9395e-05 Jy
! Component: 1300  -  total flux cleaned = -8.17048e-05 Jy
! Component: 1350  -  total flux cleaned = -0.000111155 Jy
! Component: 1400  -  total flux cleaned = -9.65258e-05 Jy
! Component: 1450  -  total flux cleaned = -0.000125635 Jy
! Component: 1500  -  total flux cleaned = -0.0001184 Jy
! Component: 1550  -  total flux cleaned = -0.000168629 Jy
! Component: 1600  -  total flux cleaned = -0.000182813 Jy
! Component: 1650  -  total flux cleaned = -0.000196997 Jy
! Component: 1700  -  total flux cleaned = -0.000211053 Jy
! Component: 1750  -  total flux cleaned = -0.000218096 Jy
! Component: 1800  -  total flux cleaned = -0.000252756 Jy
! Component: 1850  -  total flux cleaned = -0.000273423 Jy
! Component: 1900  -  total flux cleaned = -0.000314505 Jy
! Component: 1950  -  total flux cleaned = -0.00032135 Jy
! Component: 2000  -  total flux cleaned = -0.000368838 Jy
! Component: 2050  -  total flux cleaned = -0.000388993 Jy
! Component: 2100  -  total flux cleaned = -0.000415702 Jy
! Component: 2150  -  total flux cleaned = -0.000435766 Jy
! Component: 2200  -  total flux cleaned = -0.00048216 Jy
! Component: 2250  -  total flux cleaned = -0.000501933 Jy
! Component: 2300  -  total flux cleaned = -0.000508533 Jy
! Component: 2350  -  total flux cleaned = -0.000541123 Jy
! Component: 2400  -  total flux cleaned = -0.000560523 Jy
! Component: 2450  -  total flux cleaned = -0.000599272 Jy
! Component: 2500  -  total flux cleaned = -0.000631397 Jy
! Component: 2550  -  total flux cleaned = -0.000656932 Jy
! Component: 2600  -  total flux cleaned = -0.000688658 Jy
! Component: 2650  -  total flux cleaned = -0.000714001 Jy
! Component: 2700  -  total flux cleaned = -0.000701407 Jy
! Component: 2750  -  total flux cleaned = -0.000720225 Jy
! Component: 2800  -  total flux cleaned = -0.000757681 Jy
! Component: 2850  -  total flux cleaned = -0.000782511 Jy
! Component: 2900  -  total flux cleaned = -0.000770186 Jy
! Component: 2950  -  total flux cleaned = -0.000837923 Jy
! Component: 3000  -  total flux cleaned = -0.00087477 Jy
! Component: 3050  -  total flux cleaned = -0.000899203 Jy
! Component: 3100  -  total flux cleaned = -0.000899241 Jy
! Component: 3150  -  total flux cleaned = -0.000941559 Jy
! Component: 3200  -  total flux cleaned = -0.000941537 Jy
! Component: 3250  -  total flux cleaned = -0.000959541 Jy
! Component: 3300  -  total flux cleaned = -0.000977469 Jy
! Component: 3350  -  total flux cleaned = -0.00100125 Jy
! Component: 3400  -  total flux cleaned = -0.00101307 Jy
! Component: 3450  -  total flux cleaned = -0.00103667 Jy
! Component: 3500  -  total flux cleaned = -0.00105429 Jy
! Component: 3550  -  total flux cleaned = -0.0010953 Jy
! Component: 3600  -  total flux cleaned = -0.00112448 Jy
! Component: 3650  -  total flux cleaned = -0.00115935 Jy
! Component: 3700  -  total flux cleaned = -0.0011709 Jy
! Component: 3750  -  total flux cleaned = -0.00118242 Jy
! Component: 3800  -  total flux cleaned = -0.00122835 Jy
! Component: 3850  -  total flux cleaned = -0.00121691 Jy
! Component: 3900  -  total flux cleaned = -0.00125104 Jy
! Component: 3950  -  total flux cleaned = -0.00129641 Jy
! Component: 4000  -  total flux cleaned = -0.00130776 Jy
! Component: 4050  -  total flux cleaned = -0.00130217 Jy
! Total flux subtracted in 4096 components = -0.00135268 Jy
! Clean residual min=-0.000377 max=0.000373 Jy/beam
! Clean residual mean=0.000001 rms=0.000096 Jy/beam
! Combined flux in latest and established models = 0.094053 Jy
keep
! Adding 362 model components to the UV plane model.
! The established model now contains 486 components and 0.0940531 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1343+6855_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.019 x 1.226 at 89.68 degrees (North through East)
! Clean map  min=-0.00044022  max=0.073865 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1343+6855_X_map.fits
wmodel /vlbi/uf001/uva//J1343+6855_X_map.mod
! Writing 486 model components to file: /vlbi/uf001/uva//J1343+6855_X_map.mod
wobs   /vlbi/uf001/uva//J1343+6855_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1343+6855_X_uvs.fits
wwins  /vlbi/uf001/uva//J1343+6855_X_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J1343+6855_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.073865 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.61897e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.390671 0.390671 0.781342 1.56268 3.12537 6.25074 12.5015 25.0029 50.0059
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.073 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  767.909 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1343+6855_X_dfm.log closed on Mon Jan 14 02:33:47 2019