! Started logfile: /vlbi/uf001/uva//J1341+2816_S_dfm.log on Mon Jan 14 02:32:46 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1341+2816_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1341+2816_S_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.831746 visibilities/baseline/integration-bin.
! Found source: J1341+2816
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4716 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1341+2816_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004091Jy  sigma=22.742642
! Fit after  self-cal, rms=0.895655Jy  sigma=20.264654
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.863 mas, bmaj=6.132 mas, bpa=-1.978 degrees
! Estimated noise=0.593742 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0820179 Jy
! Component: 100  -  total flux cleaned = 0.100582 Jy
! Total flux subtracted in 100 components = 0.100582 Jy
! Clean residual min=-0.003913 max=0.006454 Jy/beam
! Clean residual mean=-0.000000 rms=0.001155 Jy/beam
! Combined flux in latest and established models = 0.100582 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.100582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060987Jy  sigma=1.293084
! Fit after  self-cal, rms=0.060971Jy  sigma=1.292885
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.278 mas, bmaj=6.68 mas, bpa=-1.321 degrees
! Estimated noise=0.503328 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00740917 Jy
! Component: 100  -  total flux cleaned = 0.0112094 Jy
! Component: 150  -  total flux cleaned = 0.0133636 Jy
! Component: 200  -  total flux cleaned = 0.0145059 Jy
! Total flux subtracted in 200 components = 0.0145059 Jy
! Clean residual min=-0.003763 max=0.003946 Jy/beam
! Clean residual mean=0.000008 rms=0.000942 Jy/beam
! Combined flux in latest and established models = 0.115088 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 24 components and 0.115088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060120Jy  sigma=1.272403
! Fit after  self-cal, rms=0.060112Jy  sigma=1.271976
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.278 x 6.68 at -1.321 degrees (North through East)
! Clean map  min=-0.003635  max=0.10523 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.94     HN        0.98     KP        1.03     
!   LA        0.96     MK        0.98     NL        1.03     OV        0.95     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.25     FD        1.03     HN        0.98     KP        0.99     
!   LA        0.93     MK        0.99     NL        1.06     OV        0.95     
!   PT        0.90     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.25     FD        1.00     HN        0.97     KP        0.98     
!   LA        0.98     MK        1.01     NL        1.11     OV        0.98     
!   PT        0.90     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.060112Jy  sigma=1.271976
! Fit after  self-cal, rms=0.062348Jy  sigma=1.253795
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.257 mas, bmaj=6.731 mas, bpa=-1.245 degrees
! Estimated noise=0.505159 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000182255 Jy
! Component: 100  -  total flux cleaned = 0.000249313 Jy
! Component: 150  -  total flux cleaned = 8.02473e-05 Jy
! Component: 200  -  total flux cleaned = -6.31262e-05 Jy
! Total flux subtracted in 200 components = -6.31262e-05 Jy
! Clean residual min=-0.003179 max=0.003615 Jy/beam
! Clean residual mean=0.000014 rms=0.000779 Jy/beam
! Combined flux in latest and established models = 0.115025 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 35 components and 0.115025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062227Jy  sigma=1.252585
! Fit after  self-cal, rms=0.062273Jy  sigma=1.252217
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062273Jy  sigma=1.252217
! Fit after  self-cal, rms=0.060837Jy  sigma=1.233138
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.266 mas, bmaj=6.735 mas, bpa=-0.6178 degrees
! Estimated noise=0.50525 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000186876 Jy
! Component: 100  -  total flux cleaned = -0.000118148 Jy
! Component: 150  -  total flux cleaned = -7.81003e-05 Jy
! Component: 200  -  total flux cleaned = -6.04675e-05 Jy
! Total flux subtracted in 200 components = -6.04675e-05 Jy
! Clean residual min=-0.002387 max=0.002637 Jy/beam
! Clean residual mean=0.000008 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.114965 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 43 components and 0.114965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060814Jy  sigma=1.232619
! Fit after  self-cal, rms=0.060826Jy  sigma=1.232343
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4, 18).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00250029 Jy
! Component: 100  -  total flux cleaned = 0.00316535 Jy
! Component: 150  -  total flux cleaned = 0.00355068 Jy
! Component: 200  -  total flux cleaned = 0.00380981 Jy
! Total flux subtracted in 200 components = 0.00380981 Jy
! Clean residual min=-0.002368 max=0.002023 Jy/beam
! Clean residual mean=0.000007 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.118775 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 60 components and 0.118775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060718Jy  sigma=1.229622
! Fit after  self-cal, rms=0.060708Jy  sigma=1.229419
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060708Jy  sigma=1.229419
! Fit after  self-cal, rms=0.060850Jy  sigma=1.229109
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.27 mas, bmaj=6.751 mas, bpa=-0.6118 degrees
! Estimated noise=0.504631 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000733121 Jy
! Component: 100  -  total flux cleaned = 0.00088172 Jy
! Component: 150  -  total flux cleaned = 0.000958666 Jy
! Component: 200  -  total flux cleaned = 0.00100555 Jy
! Total flux subtracted in 200 components = 0.00100555 Jy
! Clean residual min=-0.002284 max=0.002016 Jy/beam
! Clean residual mean=0.000007 rms=0.000546 Jy/beam
! Combined flux in latest and established models = 0.11978 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 73 components and 0.11978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060822Jy  sigma=1.228501
! Fit after  self-cal, rms=0.060824Jy  sigma=1.228476
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000197116 Jy
! Component: 100  -  total flux cleaned = 0.000280799 Jy
! Component: 150  -  total flux cleaned = 0.000339386 Jy
! Component: 200  -  total flux cleaned = 0.000394618 Jy
! Total flux subtracted in 200 components = 0.000394618 Jy
! Clean residual min=-0.002259 max=0.002018 Jy/beam
! Clean residual mean=0.000007 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.120175 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 83 components and 0.120175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060811Jy  sigma=1.228201
! Fit after  self-cal, rms=0.060810Jy  sigma=1.228195
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060810Jy  sigma=1.228195
! Fit after  self-cal, rms=0.060865Jy  sigma=1.228146
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.827 mas, bmaj=9.877 mas, bpa=-2.204 degrees
! Estimated noise=0.63624 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000847386 Jy
! Component: 100  -  total flux cleaned = 0.00132779 Jy
! Component: 150  -  total flux cleaned = 0.00145171 Jy
! Component: 200  -  total flux cleaned = 0.00151603 Jy
! Total flux subtracted in 200 components = 0.00151603 Jy
! Clean residual min=-0.002646 max=0.002075 Jy/beam
! Clean residual mean=0.000012 rms=0.000673 Jy/beam
! Combined flux in latest and established models = 0.121691 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 98 components and 0.121691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060863Jy  sigma=1.228158
! Fit after  self-cal, rms=0.060865Jy  sigma=1.228136
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000173963 Jy
! Component: 100  -  total flux cleaned = 0.00020588 Jy
! Component: 150  -  total flux cleaned = 0.000243224 Jy
! Component: 200  -  total flux cleaned = 0.000268427 Jy
! Total flux subtracted in 200 components = 0.000268427 Jy
! Clean residual min=-0.002639 max=0.002090 Jy/beam
! Clean residual mean=0.000012 rms=0.000670 Jy/beam
! Combined flux in latest and established models = 0.121959 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 107 components and 0.121959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060865Jy  sigma=1.228159
! Fit after  self-cal, rms=0.060865Jy  sigma=1.228155
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.271 mas, bmaj=6.757 mas, bpa=-0.6301 degrees
! Estimated noise=0.504249 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.271 x 6.757 at -0.6301 degrees (North through East)
! Clean map  min=-0.0021662  max=0.10547 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.851 mas, bmaj=6.166 mas, bpa=-1.097 degrees
! Estimated noise=0.596069 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0822686 Jy
! Component: 100  -  total flux cleaned = 0.100676 Jy
! Component: 150  -  total flux cleaned = 0.10699 Jy
! Component: 200  -  total flux cleaned = 0.110639 Jy
! Total flux subtracted in 200 components = 0.110639 Jy
! Clean residual min=-0.002935 max=0.002895 Jy/beam
! Clean residual mean=0.000004 rms=0.000701 Jy/beam
! Combined flux in latest and established models = 0.110639 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.110639 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.271 mas, bmaj=6.757 mas, bpa=-0.6301 degrees
! Estimated noise=0.504249 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (45, -110).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00298934 Jy
! Component: 100  -  total flux cleaned = 0.00504038 Jy
! Component: 150  -  total flux cleaned = 0.00659678 Jy
! Component: 200  -  total flux cleaned = 0.00741482 Jy
! Total flux subtracted in 200 components = 0.00741482 Jy
! Clean residual min=-0.002373 max=0.002115 Jy/beam
! Clean residual mean=0.000006 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.118054 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 49 components and 0.118054 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.827 mas, bmaj=9.877 mas, bpa=-2.204 degrees
! Estimated noise=0.63624 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150082 Jy
! Component: 100  -  total flux cleaned = 0.00251072 Jy
! Component: 150  -  total flux cleaned = 0.0030048 Jy
! Component: 200  -  total flux cleaned = 0.00325968 Jy
! Total flux subtracted in 200 components = 0.00325968 Jy
! Clean residual min=-0.002844 max=0.002092 Jy/beam
! Clean residual mean=0.000011 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.121313 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00021536 Jy
! Component: 100  -  total flux cleaned = 0.00036439 Jy
! Component: 150  -  total flux cleaned = 0.000448841 Jy
! Component: 200  -  total flux cleaned = 0.000496146 Jy
! Total flux subtracted in 200 components = 0.000496146 Jy
! Clean residual min=-0.002823 max=0.002016 Jy/beam
! Clean residual mean=0.000011 rms=0.000662 Jy/beam
! Combined flux in latest and established models = 0.121809 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 88 components and 0.121809 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.271 mas, bmaj=6.757 mas, bpa=-0.6301 degrees
! Estimated noise=0.504249 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00014299 Jy
! Component: 100  -  total flux cleaned = -0.000244976 Jy
! Component: 150  -  total flux cleaned = -0.000182651 Jy
! Component: 200  -  total flux cleaned = -9.54026e-05 Jy
! Total flux subtracted in 200 components = -9.54026e-05 Jy
! Clean residual min=-0.002284 max=0.001986 Jy/beam
! Clean residual mean=0.000006 rms=0.000538 Jy/beam
! Combined flux in latest and established models = 0.121714 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 108 components and 0.121714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060856Jy  sigma=1.228055
! Fit after  self-cal, rms=0.060832Jy  sigma=1.227745
wmodel J1341+2816_S_map.mod
! Writing 108 model components to file: J1341+2816_S_map.mod
wobs   J1341+2816_S_uvs.fits
! Writing UV FITS file: J1341+2816_S_uvs.fits
wwins  J1341+2816_S_map.win
! wwins: Wrote 3 windows to J1341+2816_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000917019 Jy
! Component: 100  -  total flux cleaned = -0.00114448 Jy
! Component: 150  -  total flux cleaned = -0.00136063 Jy
! Component: 200  -  total flux cleaned = -0.00163564 Jy
! Component: 250  -  total flux cleaned = -0.00196847 Jy
! Component: 300  -  total flux cleaned = -0.00219365 Jy
! Component: 350  -  total flux cleaned = -0.00228816 Jy
! Component: 400  -  total flux cleaned = -0.00241104 Jy
! Component: 450  -  total flux cleaned = -0.00247056 Jy
! Component: 500  -  total flux cleaned = -0.00258723 Jy
! Component: 550  -  total flux cleaned = -0.00270156 Jy
! Component: 600  -  total flux cleaned = -0.00275783 Jy
! Component: 650  -  total flux cleaned = -0.00286816 Jy
! Component: 700  -  total flux cleaned = -0.0029221 Jy
! Component: 750  -  total flux cleaned = -0.00297527 Jy
! Component: 800  -  total flux cleaned = -0.0030547 Jy
! Component: 850  -  total flux cleaned = -0.00310705 Jy
! Component: 900  -  total flux cleaned = -0.00313233 Jy
! Component: 950  -  total flux cleaned = -0.00313267 Jy
! Component: 1000  -  total flux cleaned = -0.00313323 Jy
! Component: 1050  -  total flux cleaned = -0.00323063 Jy
! Component: 1100  -  total flux cleaned = -0.00327808 Jy
! Component: 1150  -  total flux cleaned = -0.0033721 Jy
! Component: 1200  -  total flux cleaned = -0.00341789 Jy
! Component: 1250  -  total flux cleaned = -0.00346339 Jy
! Component: 1300  -  total flux cleaned = -0.00346348 Jy
! Component: 1350  -  total flux cleaned = -0.00346382 Jy
! Component: 1400  -  total flux cleaned = -0.00350784 Jy
! Component: 1450  -  total flux cleaned = -0.00346422 Jy
! Component: 1500  -  total flux cleaned = -0.00346411 Jy
! Component: 1550  -  total flux cleaned = -0.00344257 Jy
! Component: 1600  -  total flux cleaned = -0.00348506 Jy
! Component: 1650  -  total flux cleaned = -0.00348488 Jy
! Component: 1700  -  total flux cleaned = -0.00352564 Jy
! Component: 1750  -  total flux cleaned = -0.00344407 Jy
! Component: 1800  -  total flux cleaned = -0.0034042 Jy
! Component: 1850  -  total flux cleaned = -0.0034839 Jy
! Component: 1900  -  total flux cleaned = -0.00348365 Jy
! Component: 1950  -  total flux cleaned = -0.00344429 Jy
! Component: 2000  -  total flux cleaned = -0.00340585 Jy
! Component: 2050  -  total flux cleaned = -0.00338674 Jy
! Component: 2100  -  total flux cleaned = -0.00338661 Jy
! Component: 2150  -  total flux cleaned = -0.00349902 Jy
! Component: 2200  -  total flux cleaned = -0.00336915 Jy
! Component: 2250  -  total flux cleaned = -0.00344292 Jy
! Component: 2300  -  total flux cleaned = -0.00346153 Jy
! Component: 2350  -  total flux cleaned = -0.00344323 Jy
! Component: 2400  -  total flux cleaned = -0.00346114 Jy
! Component: 2450  -  total flux cleaned = -0.00347877 Jy
! Component: 2500  -  total flux cleaned = -0.00351404 Jy
! Component: 2550  -  total flux cleaned = -0.00335723 Jy
! Component: 2600  -  total flux cleaned = -0.00337419 Jy
! Component: 2650  -  total flux cleaned = -0.00330571 Jy
! Component: 2700  -  total flux cleaned = -0.00333962 Jy
! Component: 2750  -  total flux cleaned = -0.00332263 Jy
! Component: 2800  -  total flux cleaned = -0.00330592 Jy
! Component: 2850  -  total flux cleaned = -0.0032893 Jy
! Component: 2900  -  total flux cleaned = -0.00319099 Jy
! Component: 2950  -  total flux cleaned = -0.00319103 Jy
! Component: 3000  -  total flux cleaned = -0.00319108 Jy
! Component: 3050  -  total flux cleaned = -0.00320686 Jy
! Component: 3100  -  total flux cleaned = -0.0031432 Jy
! Component: 3150  -  total flux cleaned = -0.00312709 Jy
! Component: 3200  -  total flux cleaned = -0.00303328 Jy
! Component: 3250  -  total flux cleaned = -0.00298687 Jy
! Component: 3300  -  total flux cleaned = -0.00304851 Jy
! Component: 3350  -  total flux cleaned = -0.00292602 Jy
! Component: 3400  -  total flux cleaned = -0.00291086 Jy
! Component: 3450  -  total flux cleaned = -0.00291088 Jy
! Component: 3500  -  total flux cleaned = -0.00288117 Jy
! Component: 3550  -  total flux cleaned = -0.00288133 Jy
! Component: 3600  -  total flux cleaned = -0.00285176 Jy
! Component: 3650  -  total flux cleaned = -0.00288108 Jy
! Component: 3700  -  total flux cleaned = -0.00276467 Jy
! Component: 3750  -  total flux cleaned = -0.00277918 Jy
! Component: 3800  -  total flux cleaned = -0.00273606 Jy
! Component: 3850  -  total flux cleaned = -0.00273608 Jy
! Component: 3900  -  total flux cleaned = -0.00263691 Jy
! Component: 3950  -  total flux cleaned = -0.00269313 Jy
! Component: 4000  -  total flux cleaned = -0.00263717 Jy
! Component: 4050  -  total flux cleaned = -0.00259546 Jy
! Total flux subtracted in 4096 components = -0.00259532 Jy
! Clean residual min=-0.000982 max=0.000714 Jy/beam
! Clean residual mean=0.000003 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.119119 Jy
keep
! Adding 310 model components to the UV plane model.
! The established model now contains 418 components and 0.119119 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1341+2816_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.271 x 6.757 at -0.6301 degrees (North through East)
! Clean map  min=-0.0017381  max=0.10548 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1341+2816_S_map.fits
wmodel /vlbi/uf001/uva//J1341+2816_S_map.mod
! Writing 418 model components to file: /vlbi/uf001/uva//J1341+2816_S_map.mod
wobs   /vlbi/uf001/uva//J1341+2816_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1341+2816_S_uvs.fits
wwins  /vlbi/uf001/uva//J1341+2816_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1341+2816_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.10548 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00025287 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.719197 0.719197 1.43839 2.87679 5.75358 11.5072 23.0143 46.0286 92.0572
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.105 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  417.131 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1341+2816_S_dfm.log closed on Mon Jan 14 02:32:50 2019