! Started logfile: /vlbi/uf001/uva//J1340-0137_S_dfm.log on Mon Jan 14 02:32:22 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1340-0137_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1340-0137_S_uva.fits ! AN table 1: 55 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.811039 visibilities/baseline/integration-bin. ! Found source: J1340-0137 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 3747 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1340-0137_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.021564Jy sigma=17.493014 ! Fit after self-cal, rms=0.843208Jy sigma=14.255305 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.481 mas, bmaj=6.171 mas, bpa=-3.099 degrees ! Estimated noise=0.925484 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126653 Jy ! Component: 100 - total flux cleaned = 0.154282 Jy ! Total flux subtracted in 100 components = 0.154282 Jy ! Clean residual min=-0.008901 max=0.012767 Jy/beam ! Clean residual mean=0.000012 rms=0.002337 Jy/beam ! Combined flux in latest and established models = 0.154282 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.154282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083601Jy sigma=1.301118 ! Fit after self-cal, rms=0.083598Jy sigma=1.300898 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.751 mas, bmaj=6.633 mas, bpa=-1.928 degrees ! Estimated noise=0.753881 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, -19.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130452 Jy ! Component: 100 - total flux cleaned = 0.0169053 Jy ! Component: 150 - total flux cleaned = 0.0195253 Jy ! Component: 200 - total flux cleaned = 0.0217691 Jy ! Total flux subtracted in 200 components = 0.0217691 Jy ! Clean residual min=-0.006885 max=0.009783 Jy/beam ! Clean residual mean=0.000016 rms=0.001906 Jy/beam ! Combined flux in latest and established models = 0.176051 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 25 components and 0.176051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.081234Jy sigma=1.255751 ! Fit after self-cal, rms=0.081114Jy sigma=1.253332 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.751 x 6.633 at -1.928 degrees (North through East) ! Clean map min=-0.0070658 max=0.16195 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 HN 0.96 LA 0.87 MK 1.00 ! NL 1.05 OV 1.13 PT 0.98 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.97 LA 0.94 MK 1.01 ! NL 1.05 OV 1.16 PT 0.97 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 0.94 LA 0.90 MK 1.04 ! NL 1.02 OV 1.21 PT 1.00 SC 0.98 ! ! ! Fit before self-cal, rms=0.081114Jy sigma=1.253332 ! Fit after self-cal, rms=0.080534Jy sigma=1.204787 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.782 mas, bmaj=6.647 mas, bpa=-2.049 degrees ! Estimated noise=0.74293 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00126484 Jy ! Component: 100 - total flux cleaned = -0.00126198 Jy ! Component: 150 - total flux cleaned = -0.00121087 Jy ! Component: 200 - total flux cleaned = -0.00134854 Jy ! Total flux subtracted in 200 components = -0.00134854 Jy ! Clean residual min=-0.006202 max=0.004510 Jy/beam ! Clean residual mean=0.000005 rms=0.001273 Jy/beam ! Combined flux in latest and established models = 0.174702 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 42 components and 0.174702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080427Jy sigma=1.203141 ! Fit after self-cal, rms=0.080555Jy sigma=1.202459 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080555Jy sigma=1.202459 ! Fit after self-cal, rms=0.089732Jy sigma=1.174628 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.778 mas, bmaj=6.633 mas, bpa=-2.103 degrees ! Estimated noise=0.747336 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00222002 Jy ! Component: 100 - total flux cleaned = -0.0026849 Jy ! Component: 150 - total flux cleaned = -0.00269465 Jy ! Component: 200 - total flux cleaned = -0.00261921 Jy ! Total flux subtracted in 200 components = -0.00261921 Jy ! Clean residual min=-0.003459 max=0.003097 Jy/beam ! Clean residual mean=0.000008 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.172083 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 62 components and 0.172083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089640Jy sigma=1.172761 ! Fit after self-cal, rms=0.089751Jy sigma=1.172276 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00083806 Jy ! Component: 100 - total flux cleaned = -0.000873445 Jy ! Component: 150 - total flux cleaned = -0.0008426 Jy ! Component: 200 - total flux cleaned = -0.000759523 Jy ! Total flux subtracted in 200 components = -0.000759523 Jy ! Clean residual min=-0.003389 max=0.003095 Jy/beam ! Clean residual mean=0.000008 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.171324 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 78 components and 0.171324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089727Jy sigma=1.171788 ! Fit after self-cal, rms=0.089717Jy sigma=1.171724 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089717Jy sigma=1.171724 ! Fit after self-cal, rms=0.099292Jy sigma=1.168432 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.775 mas, bmaj=6.625 mas, bpa=-1.996 degrees ! Estimated noise=0.746457 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000695392 Jy ! Component: 100 - total flux cleaned = -0.000622174 Jy ! Component: 150 - total flux cleaned = -0.000650193 Jy ! Component: 200 - total flux cleaned = -0.000701401 Jy ! Total flux subtracted in 200 components = -0.000701401 Jy ! Clean residual min=-0.002866 max=0.002755 Jy/beam ! Clean residual mean=0.000006 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.170622 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 88 components and 0.170622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099258Jy sigma=1.168007 ! Fit after self-cal, rms=0.099305Jy sigma=1.167941 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000102493 Jy ! Component: 100 - total flux cleaned = -0.000123176 Jy ! Component: 150 - total flux cleaned = -0.000102651 Jy ! Component: 200 - total flux cleaned = -6.48449e-05 Jy ! Total flux subtracted in 200 components = -6.48449e-05 Jy ! Clean residual min=-0.002868 max=0.002727 Jy/beam ! Clean residual mean=0.000005 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.170557 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 101 components and 0.170558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099293Jy sigma=1.167786 ! Fit after self-cal, rms=0.099291Jy sigma=1.167776 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099291Jy sigma=1.167776 ! Fit after self-cal, rms=0.100052Jy sigma=1.167599 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.384 mas, bmaj=11.15 mas, bpa=1.239 degrees ! Estimated noise=1.04697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000374145 Jy ! Component: 100 - total flux cleaned = 0.000650039 Jy ! Component: 150 - total flux cleaned = 0.000808593 Jy ! Component: 200 - total flux cleaned = 0.000891612 Jy ! Total flux subtracted in 200 components = 0.000891612 Jy ! Clean residual min=-0.003069 max=0.003218 Jy/beam ! Clean residual mean=0.000013 rms=0.000932 Jy/beam ! Combined flux in latest and established models = 0.171449 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 112 components and 0.171449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100056Jy sigma=1.167469 ! Fit after self-cal, rms=0.100061Jy sigma=1.167391 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.37225e-05 Jy ! Component: 100 - total flux cleaned = 8.5668e-05 Jy ! Component: 150 - total flux cleaned = 0.000147892 Jy ! Component: 200 - total flux cleaned = 0.000204831 Jy ! Total flux subtracted in 200 components = 0.000204831 Jy ! Clean residual min=-0.003076 max=0.003204 Jy/beam ! Clean residual mean=0.000012 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.171654 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 125 components and 0.171654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100069Jy sigma=1.167366 ! Fit after self-cal, rms=0.100065Jy sigma=1.167343 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=6.618 mas, bpa=-1.964 degrees ! Estimated noise=0.746456 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.774 x 6.618 at -1.964 degrees (North through East) ! Clean map min=-0.0042569 max=0.16132 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.499 mas, bmaj=6.147 mas, bpa=-3.213 degrees ! Estimated noise=0.918984 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.125612 Jy ! Component: 100 - total flux cleaned = 0.153081 Jy ! Component: 150 - total flux cleaned = 0.161001 Jy ! Component: 200 - total flux cleaned = 0.165545 Jy ! Total flux subtracted in 200 components = 0.165545 Jy ! Clean residual min=-0.004066 max=0.004180 Jy/beam ! Clean residual mean=0.000004 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 0.165545 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.165545 Jy ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=6.618 mas, bpa=-1.964 degrees ! Estimated noise=0.746456 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275049 Jy ! Component: 100 - total flux cleaned = 0.00338796 Jy ! Component: 150 - total flux cleaned = 0.00352069 Jy ! Component: 200 - total flux cleaned = 0.00362336 Jy ! Total flux subtracted in 200 components = 0.00362336 Jy ! Clean residual min=-0.003064 max=0.002918 Jy/beam ! Clean residual mean=0.000006 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.169168 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 33 components and 0.169168 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.384 mas, bmaj=11.15 mas, bpa=1.239 degrees ! Estimated noise=1.04697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116301 Jy ! Component: 100 - total flux cleaned = 0.00138459 Jy ! Component: 150 - total flux cleaned = 0.00152876 Jy ! Component: 200 - total flux cleaned = 0.00157202 Jy ! Total flux subtracted in 200 components = 0.00157202 Jy ! Clean residual min=-0.003171 max=0.003462 Jy/beam ! Clean residual mean=0.000014 rms=0.000978 Jy/beam ! Combined flux in latest and established models = 0.17074 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116875 Jy ! Component: 100 - total flux cleaned = 0.00018611 Jy ! Component: 150 - total flux cleaned = 0.000247826 Jy ! Component: 200 - total flux cleaned = 0.000331843 Jy ! Total flux subtracted in 200 components = 0.000331843 Jy ! Clean residual min=-0.003102 max=0.003231 Jy/beam ! Clean residual mean=0.000013 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.171072 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 59 components and 0.171072 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=6.618 mas, bpa=-1.964 degrees ! Estimated noise=0.746456 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000204901 Jy ! Component: 100 - total flux cleaned = 0.000323761 Jy ! Component: 150 - total flux cleaned = 0.000425861 Jy ! Component: 200 - total flux cleaned = 0.00045549 Jy ! Total flux subtracted in 200 components = 0.00045549 Jy ! Clean residual min=-0.002943 max=0.002793 Jy/beam ! Clean residual mean=0.000004 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.171528 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 73 components and 0.171528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100077Jy sigma=1.167878 ! Fit after self-cal, rms=0.100068Jy sigma=1.167812 wmodel J1340-0137_S_map.mod ! Writing 73 model components to file: J1340-0137_S_map.mod wobs J1340-0137_S_uvs.fits ! Writing UV FITS file: J1340-0137_S_uvs.fits wwins J1340-0137_S_map.win ! wwins: Wrote 2 windows to J1340-0137_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000888163 Jy ! Component: 100 - total flux cleaned = -0.00131389 Jy ! Component: 150 - total flux cleaned = -0.00144777 Jy ! Component: 200 - total flux cleaned = -0.00140512 Jy ! Component: 250 - total flux cleaned = -0.00140474 Jy ! Component: 300 - total flux cleaned = -0.00132269 Jy ! Component: 350 - total flux cleaned = -0.00120483 Jy ! Component: 400 - total flux cleaned = -0.0011661 Jy ! Component: 450 - total flux cleaned = -0.00109039 Jy ! Component: 500 - total flux cleaned = -0.000907763 Jy ! Component: 550 - total flux cleaned = -0.000907707 Jy ! Component: 600 - total flux cleaned = -0.000837907 Jy ! Component: 650 - total flux cleaned = -0.000803809 Jy ! Component: 700 - total flux cleaned = -0.000837135 Jy ! Component: 750 - total flux cleaned = -0.000869323 Jy ! Component: 800 - total flux cleaned = -0.000932597 Jy ! Component: 850 - total flux cleaned = -0.00096337 Jy ! Component: 900 - total flux cleaned = -0.000963071 Jy ! Component: 950 - total flux cleaned = -0.00087206 Jy ! Component: 1000 - total flux cleaned = -0.000872071 Jy ! Component: 1050 - total flux cleaned = -0.000813959 Jy ! Component: 1100 - total flux cleaned = -0.000842264 Jy ! Component: 1150 - total flux cleaned = -0.000728559 Jy ! Component: 1200 - total flux cleaned = -0.000617003 Jy ! Component: 1250 - total flux cleaned = -0.000480136 Jy ! Component: 1300 - total flux cleaned = -0.000480658 Jy ! Component: 1350 - total flux cleaned = -0.000400463 Jy ! Component: 1400 - total flux cleaned = -0.000295583 Jy ! Component: 1450 - total flux cleaned = -0.000217642 Jy ! Component: 1500 - total flux cleaned = -0.000243339 Jy ! Component: 1550 - total flux cleaned = -0.000116748 Jy ! Component: 1600 - total flux cleaned = -6.69163e-05 Jy ! Component: 1650 - total flux cleaned = -1.75763e-05 Jy ! Component: 1700 - total flux cleaned = 5.59996e-05 Jy ! Component: 1750 - total flux cleaned = 0.000152595 Jy ! Component: 1800 - total flux cleaned = 0.000271954 Jy ! Component: 1850 - total flux cleaned = 0.00036637 Jy ! Component: 1900 - total flux cleaned = 0.000436365 Jy ! Component: 1950 - total flux cleaned = 0.000529143 Jy ! Component: 2000 - total flux cleaned = 0.000643277 Jy ! Component: 2050 - total flux cleaned = 0.000643076 Jy ! Component: 2100 - total flux cleaned = 0.000777176 Jy ! Component: 2150 - total flux cleaned = 0.000754918 Jy ! Component: 2200 - total flux cleaned = 0.000907853 Jy ! Component: 2250 - total flux cleaned = 0.000929604 Jy ! Component: 2300 - total flux cleaned = 0.000993932 Jy ! Component: 2350 - total flux cleaned = 0.00107841 Jy ! Component: 2400 - total flux cleaned = 0.00107838 Jy ! Component: 2450 - total flux cleaned = 0.00105727 Jy ! Component: 2500 - total flux cleaned = 0.00107786 Jy ! Component: 2550 - total flux cleaned = 0.00103682 Jy ! Component: 2600 - total flux cleaned = 0.00107766 Jy ! Component: 2650 - total flux cleaned = 0.00109775 Jy ! Component: 2700 - total flux cleaned = 0.00121715 Jy ! Component: 2750 - total flux cleaned = 0.00125654 Jy ! Component: 2800 - total flux cleaned = 0.00135437 Jy ! Component: 2850 - total flux cleaned = 0.00145107 Jy ! Component: 2900 - total flux cleaned = 0.00150886 Jy ! Component: 2950 - total flux cleaned = 0.00160458 Jy ! Component: 3000 - total flux cleaned = 0.00171843 Jy ! Component: 3050 - total flux cleaned = 0.00183129 Jy ! Component: 3100 - total flux cleaned = 0.00190586 Jy ! Component: 3150 - total flux cleaned = 0.00198016 Jy ! Component: 3200 - total flux cleaned = 0.00209068 Jy ! Component: 3250 - total flux cleaned = 0.00218183 Jy ! Component: 3300 - total flux cleaned = 0.00223628 Jy ! Component: 3350 - total flux cleaned = 0.00227256 Jy ! Component: 3400 - total flux cleaned = 0.00245175 Jy ! Component: 3450 - total flux cleaned = 0.00257645 Jy ! Component: 3500 - total flux cleaned = 0.00266501 Jy ! Component: 3550 - total flux cleaned = 0.0027179 Jy ! Component: 3600 - total flux cleaned = 0.00287531 Jy ! Component: 3650 - total flux cleaned = 0.00301431 Jy ! Component: 3700 - total flux cleaned = 0.00308347 Jy ! Component: 3750 - total flux cleaned = 0.00315221 Jy ! Component: 3800 - total flux cleaned = 0.00323759 Jy ! Component: 3850 - total flux cleaned = 0.0033395 Jy ! Component: 3900 - total flux cleaned = 0.00339016 Jy ! Component: 3950 - total flux cleaned = 0.00350785 Jy ! Component: 4000 - total flux cleaned = 0.00357475 Jy ! Component: 4050 - total flux cleaned = 0.00364123 Jy ! Total flux subtracted in 4096 components = 0.00374045 Jy ! Clean residual min=-0.001042 max=0.001086 Jy/beam ! Clean residual mean=0.000003 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.175268 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 352 components and 0.175268 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1340-0137_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.774 x 6.618 at -1.964 degrees (North through East) ! Clean map min=-0.0024601 max=0.16113 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1340-0137_S_map.fits wmodel /vlbi/uf001/uva//J1340-0137_S_map.mod ! Writing 352 model components to file: /vlbi/uf001/uva//J1340-0137_S_map.mod wobs /vlbi/uf001/uva//J1340-0137_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1340-0137_S_uvs.fits wwins /vlbi/uf001/uva//J1340-0137_S_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uva//J1340-0137_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.161134 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000288989 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.53804 0.53804 1.07608 2.15216 4.30432 8.60864 17.2173 34.4346 68.8691 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.161 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 557.579 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1340-0137_S_dfm.log closed on Mon Jan 14 02:32:26 2019