! Started logfile: /vlbi/uf001/uva//J1340+6923_S_dfm.log on Mon Jan 14 02:32:08 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1340+6923_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1340+6923_S_uva.fits
! AN table 1: 76 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.977485 visibilities/baseline/integration-bin.
! Found source: J1340+6923
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 10029 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1340+6923_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.023171Jy  sigma=22.246486
! Fit after  self-cal, rms=0.808960Jy  sigma=17.611725
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.178 mas, bmaj=3.84 mas, bpa=-83.85 degrees
! Estimated noise=0.466611 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.137844 Jy
! Component: 100  -  total flux cleaned = 0.179066 Jy
! Total flux subtracted in 100 components = 0.179066 Jy
! Clean residual min=-0.007361 max=0.024567 Jy/beam
! Clean residual mean=-0.000044 rms=0.002224 Jy/beam
! Combined flux in latest and established models = 0.179066 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.179066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085580Jy  sigma=1.739670
! Fit after  self-cal, rms=0.085394Jy  sigma=1.735998
! Inverting map 
! Added new window around map position (-5, -2.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.026372 Jy
! Component: 100  -  total flux cleaned = 0.0431973 Jy
! Total flux subtracted in 100 components = 0.0431973 Jy
! Clean residual min=-0.006529 max=0.011253 Jy/beam
! Clean residual mean=-0.000021 rms=0.001469 Jy/beam
! Combined flux in latest and established models = 0.222263 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 39 components and 0.222264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072686Jy  sigma=1.462956
! Fit after  self-cal, rms=0.072263Jy  sigma=1.453413
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0130497 Jy
! Component: 100  -  total flux cleaned = 0.0217755 Jy
! Total flux subtracted in 100 components = 0.0217755 Jy
! Clean residual min=-0.005479 max=0.006527 Jy/beam
! Clean residual mean=-0.000010 rms=0.001148 Jy/beam
! Combined flux in latest and established models = 0.244039 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 62 components and 0.244039 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068516Jy  sigma=1.375825
! Fit after  self-cal, rms=0.068332Jy  sigma=1.371849
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.893 mas, bmaj=4.501 mas, bpa=87.56 degrees
! Estimated noise=0.340559 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010064 Jy
! Component: 100  -  total flux cleaned = 0.0160608 Jy
! Component: 150  -  total flux cleaned = 0.0200034 Jy
! Component: 200  -  total flux cleaned = 0.0227211 Jy
! Total flux subtracted in 200 components = 0.0227211 Jy
! Clean residual min=-0.004229 max=0.003804 Jy/beam
! Clean residual mean=0.000003 rms=0.000967 Jy/beam
! Combined flux in latest and established models = 0.26676 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 87 components and 0.26676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066519Jy  sigma=1.338643
! Fit after  self-cal, rms=0.066407Jy  sigma=1.336224
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.893 x 4.501 at 87.56 degrees (North through East)
! Clean map  min=-0.0039724  max=0.17834 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.94     HN        1.03     KP        1.04     
!   LA        0.98     MK        1.04     NL        1.08     OV        1.02     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.84     FD        0.93     HN        1.03     KP        1.03     
!   LA        0.98     MK        1.03     NL        1.09     OV        0.92     
!   PT        1.01     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.97     HN        1.03     KP        1.04     
!   LA        0.99     MK        1.04     NL        1.06     OV        1.04     
!   PT        1.00     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.066407Jy  sigma=1.336224
! Fit after  self-cal, rms=0.063293Jy  sigma=1.290160
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.939 mas, bmaj=4.559 mas, bpa=87.21 degrees
! Estimated noise=0.341985 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107114 Jy
! Component: 100  -  total flux cleaned = 0.00132872 Jy
! Component: 150  -  total flux cleaned = 0.00142257 Jy
! Component: 200  -  total flux cleaned = 0.00146267 Jy
! Total flux subtracted in 200 components = 0.00146267 Jy
! Clean residual min=-0.002912 max=0.002993 Jy/beam
! Clean residual mean=0.000008 rms=0.000658 Jy/beam
! Combined flux in latest and established models = 0.268223 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 103 components and 0.268223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063177Jy  sigma=1.287658
! Fit after  self-cal, rms=0.063157Jy  sigma=1.286836
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063157Jy  sigma=1.286836
! Fit after  self-cal, rms=0.060856Jy  sigma=1.247149
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.938 mas, bmaj=4.557 mas, bpa=87.64 degrees
! Estimated noise=0.341792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000164903 Jy
! Component: 100  -  total flux cleaned = 0.000257964 Jy
! Component: 150  -  total flux cleaned = 0.000219415 Jy
! Component: 200  -  total flux cleaned = 0.000189001 Jy
! Total flux subtracted in 200 components = 0.000189001 Jy
! Clean residual min=-0.002143 max=0.001775 Jy/beam
! Clean residual mean=0.000000 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.268412 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 111 components and 0.268412 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060799Jy  sigma=1.245658
! Fit after  self-cal, rms=0.060781Jy  sigma=1.245193
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.97782e-05 Jy
! Component: 100  -  total flux cleaned = 8.52223e-05 Jy
! Component: 150  -  total flux cleaned = 8.56494e-05 Jy
! Component: 200  -  total flux cleaned = 8.68188e-05 Jy
! Total flux subtracted in 200 components = 8.68188e-05 Jy
! Clean residual min=-0.002039 max=0.001693 Jy/beam
! Clean residual mean=0.000001 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.268499 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 111 components and 0.268499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060749Jy  sigma=1.244404
! Fit after  self-cal, rms=0.060738Jy  sigma=1.244200
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060738Jy  sigma=1.244200
! Fit after  self-cal, rms=0.060761Jy  sigma=1.243962
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.943 mas, bmaj=4.552 mas, bpa=87.9 degrees
! Estimated noise=0.341551 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000155788 Jy
! Component: 100  -  total flux cleaned = -0.000182669 Jy
! Component: 150  -  total flux cleaned = -0.000159151 Jy
! Component: 200  -  total flux cleaned = -0.0001595 Jy
! Total flux subtracted in 200 components = -0.0001595 Jy
! Clean residual min=-0.001960 max=0.001619 Jy/beam
! Clean residual mean=0.000000 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.268339 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 111 components and 0.268339 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060736Jy  sigma=1.243319
! Fit after  self-cal, rms=0.060729Jy  sigma=1.243180
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.54767e-05 Jy
! Component: 100  -  total flux cleaned = 4.50978e-05 Jy
! Component: 150  -  total flux cleaned = 4.56249e-05 Jy
! Component: 200  -  total flux cleaned = 6.3331e-05 Jy
! Total flux subtracted in 200 components = 6.3331e-05 Jy
! Clean residual min=-0.001895 max=0.001591 Jy/beam
! Clean residual mean=0.000000 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.268403 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 111 components and 0.268403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060713Jy  sigma=1.242783
! Fit after  self-cal, rms=0.060708Jy  sigma=1.242690
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060708Jy  sigma=1.242690
! Fit after  self-cal, rms=0.060732Jy  sigma=1.242643
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.803 mas, bmaj=9.099 mas, bpa=76.78 degrees
! Estimated noise=0.437528 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.19165e-06 Jy
! Component: 100  -  total flux cleaned = 2.44655e-05 Jy
! Component: 150  -  total flux cleaned = 1.74617e-05 Jy
! Component: 200  -  total flux cleaned = -7.99981e-06 Jy
! Total flux subtracted in 200 components = -7.99981e-06 Jy
! Clean residual min=-0.001605 max=0.001721 Jy/beam
! Clean residual mean=0.000002 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.268395 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 118 components and 0.268395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060729Jy  sigma=1.242489
! Fit after  self-cal, rms=0.060726Jy  sigma=1.242434
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.76617e-06 Jy
! Component: 100  -  total flux cleaned = 7.86983e-06 Jy
! Component: 150  -  total flux cleaned = -1.63882e-05 Jy
! Component: 200  -  total flux cleaned = -3.77932e-05 Jy
! Total flux subtracted in 200 components = -3.77932e-05 Jy
! Clean residual min=-0.001607 max=0.001715 Jy/beam
! Clean residual mean=0.000002 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.268357 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 124 components and 0.268357 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060725Jy  sigma=1.242337
! Fit after  self-cal, rms=0.060723Jy  sigma=1.242305
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.948 mas, bmaj=4.549 mas, bpa=88.06 degrees
! Estimated noise=0.34142 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.948 x 4.549 at 88.06 degrees (North through East)
! Clean map  min=-0.0016886  max=0.17737 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.216 mas, bmaj=3.884 mas, bpa=-83.52 degrees
! Estimated noise=0.473138 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.139029 Jy
! Component: 100  -  total flux cleaned = 0.185024 Jy
! Component: 150  -  total flux cleaned = 0.210502 Jy
! Component: 200  -  total flux cleaned = 0.226913 Jy
! Total flux subtracted in 200 components = 0.226913 Jy
! Clean residual min=-0.003850 max=0.008935 Jy/beam
! Clean residual mean=-0.000022 rms=0.001009 Jy/beam
! Combined flux in latest and established models = 0.226913 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 40 model components to the UV plane model.
! The established model now contains 40 components and 0.226913 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.948 mas, bmaj=4.549 mas, bpa=88.06 degrees
! Estimated noise=0.34142 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.015317 Jy
! Component: 100  -  total flux cleaned = 0.0244475 Jy
! Component: 150  -  total flux cleaned = 0.0302333 Jy
! Component: 200  -  total flux cleaned = 0.0340528 Jy
! Total flux subtracted in 200 components = 0.0340528 Jy
! Clean residual min=-0.001976 max=0.002257 Jy/beam
! Clean residual mean=-0.000008 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.260966 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 86 components and 0.260966 Jy
! Inverting map 
! Added new window around map position (4, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00264717 Jy
! Component: 100  -  total flux cleaned = 0.00444836 Jy
! Component: 150  -  total flux cleaned = 0.00570904 Jy
! Component: 200  -  total flux cleaned = 0.00617757 Jy
! Total flux subtracted in 200 components = 0.00617757 Jy
! Clean residual min=-0.001913 max=0.001543 Jy/beam
! Clean residual mean=-0.000001 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.267143 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 107 components and 0.267143 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.803 mas, bmaj=9.099 mas, bpa=76.78 degrees
! Estimated noise=0.437528 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000778427 Jy
! Component: 100  -  total flux cleaned = 0.000945438 Jy
! Component: 150  -  total flux cleaned = 0.00106927 Jy
! Component: 200  -  total flux cleaned = 0.00116237 Jy
! Total flux subtracted in 200 components = 0.00116237 Jy
! Clean residual min=-0.001635 max=0.001690 Jy/beam
! Clean residual mean=0.000002 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.268306 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.73123e-05 Jy
! Component: 100  -  total flux cleaned = 8.54805e-05 Jy
! Component: 150  -  total flux cleaned = 9.82304e-05 Jy
! Component: 200  -  total flux cleaned = 0.000109777 Jy
! Total flux subtracted in 200 components = 0.000109777 Jy
! Clean residual min=-0.001641 max=0.001688 Jy/beam
! Clean residual mean=0.000002 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.268415 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 129 components and 0.268415 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.948 mas, bmaj=4.549 mas, bpa=88.06 degrees
! Estimated noise=0.34142 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000353913 Jy
! Component: 100  -  total flux cleaned = -0.000329355 Jy
! Component: 150  -  total flux cleaned = -0.000306279 Jy
! Component: 200  -  total flux cleaned = -0.000262292 Jy
! Total flux subtracted in 200 components = -0.000262292 Jy
! Clean residual min=-0.001899 max=0.001600 Jy/beam
! Clean residual mean=0.000000 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.268153 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 141 components and 0.268153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060713Jy  sigma=1.241801
! Fit after  self-cal, rms=0.060700Jy  sigma=1.241575
wmodel J1340+6923_S_map.mod
! Writing 141 model components to file: J1340+6923_S_map.mod
wobs   J1340+6923_S_uvs.fits
! Writing UV FITS file: J1340+6923_S_uvs.fits
wwins  J1340+6923_S_map.win
! wwins: Wrote 3 windows to J1340+6923_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000535052 Jy
! Component: 100  -  total flux cleaned = -0.00067562 Jy
! Component: 150  -  total flux cleaned = -0.000783312 Jy
! Component: 200  -  total flux cleaned = -0.000913362 Jy
! Component: 250  -  total flux cleaned = -0.00101452 Jy
! Component: 300  -  total flux cleaned = -0.00106473 Jy
! Component: 350  -  total flux cleaned = -0.00120889 Jy
! Component: 400  -  total flux cleaned = -0.00139593 Jy
! Component: 450  -  total flux cleaned = -0.00141891 Jy
! Component: 500  -  total flux cleaned = -0.00155424 Jy
! Component: 550  -  total flux cleaned = -0.00166523 Jy
! Component: 600  -  total flux cleaned = -0.00181787 Jy
! Component: 650  -  total flux cleaned = -0.00194673 Jy
! Component: 700  -  total flux cleaned = -0.00215812 Jy
! Component: 750  -  total flux cleaned = -0.00222072 Jy
! Component: 800  -  total flux cleaned = -0.00228239 Jy
! Component: 850  -  total flux cleaned = -0.00246434 Jy
! Component: 900  -  total flux cleaned = -0.00244447 Jy
! Component: 950  -  total flux cleaned = -0.00252339 Jy
! Component: 1000  -  total flux cleaned = -0.00252354 Jy
! Component: 1050  -  total flux cleaned = -0.00260099 Jy
! Component: 1100  -  total flux cleaned = -0.00275303 Jy
! Component: 1150  -  total flux cleaned = -0.00275308 Jy
! Component: 1200  -  total flux cleaned = -0.00284621 Jy
! Component: 1250  -  total flux cleaned = -0.00295667 Jy
! Component: 1300  -  total flux cleaned = -0.00304767 Jy
! Component: 1350  -  total flux cleaned = -0.00301127 Jy
! Component: 1400  -  total flux cleaned = -0.0031006 Jy
! Component: 1450  -  total flux cleaned = -0.00315344 Jy
! Component: 1500  -  total flux cleaned = -0.00318843 Jy
! Component: 1550  -  total flux cleaned = -0.00322338 Jy
! Component: 1600  -  total flux cleaned = -0.00327507 Jy
! Component: 1650  -  total flux cleaned = -0.00327514 Jy
! Component: 1700  -  total flux cleaned = -0.00334274 Jy
! Component: 1750  -  total flux cleaned = -0.00337618 Jy
! Component: 1800  -  total flux cleaned = -0.00344259 Jy
! Component: 1850  -  total flux cleaned = -0.00344278 Jy
! Component: 1900  -  total flux cleaned = -0.00347542 Jy
! Component: 1950  -  total flux cleaned = -0.00352403 Jy
! Component: 2000  -  total flux cleaned = -0.00355605 Jy
! Component: 2050  -  total flux cleaned = -0.00358809 Jy
! Component: 2100  -  total flux cleaned = -0.0036199 Jy
! Component: 2150  -  total flux cleaned = -0.00374568 Jy
! Component: 2200  -  total flux cleaned = -0.0037145 Jy
! Component: 2250  -  total flux cleaned = -0.00374555 Jy
! Component: 2300  -  total flux cleaned = -0.00385329 Jy
! Component: 2350  -  total flux cleaned = -0.00386869 Jy
! Component: 2400  -  total flux cleaned = -0.0039292 Jy
! Component: 2450  -  total flux cleaned = -0.00395939 Jy
! Component: 2500  -  total flux cleaned = -0.00407916 Jy
! Component: 2550  -  total flux cleaned = -0.00407916 Jy
! Component: 2600  -  total flux cleaned = -0.00413812 Jy
! Component: 2650  -  total flux cleaned = -0.00421141 Jy
! Component: 2700  -  total flux cleaned = -0.00425494 Jy
! Component: 2750  -  total flux cleaned = -0.00429831 Jy
! Component: 2800  -  total flux cleaned = -0.00434132 Jy
! Component: 2850  -  total flux cleaned = -0.00441266 Jy
! Component: 2900  -  total flux cleaned = -0.00445515 Jy
! Component: 2950  -  total flux cleaned = -0.00448359 Jy
! Component: 3000  -  total flux cleaned = -0.00458155 Jy
! Component: 3050  -  total flux cleaned = -0.00459555 Jy
! Component: 3100  -  total flux cleaned = -0.00462334 Jy
! Component: 3150  -  total flux cleaned = -0.00471968 Jy
! Component: 3200  -  total flux cleaned = -0.00477429 Jy
! Component: 3250  -  total flux cleaned = -0.00484224 Jy
! Component: 3300  -  total flux cleaned = -0.00488271 Jy
! Component: 3350  -  total flux cleaned = -0.00488274 Jy
! Component: 3400  -  total flux cleaned = -0.0049226 Jy
! Component: 3450  -  total flux cleaned = -0.00496254 Jy
! Component: 3500  -  total flux cleaned = -0.00501528 Jy
! Component: 3550  -  total flux cleaned = -0.00505451 Jy
! Component: 3600  -  total flux cleaned = -0.00508071 Jy
! Component: 3650  -  total flux cleaned = -0.00513261 Jy
! Component: 3700  -  total flux cleaned = -0.00514545 Jy
! Component: 3750  -  total flux cleaned = -0.00514544 Jy
! Component: 3800  -  total flux cleaned = -0.00522184 Jy
! Component: 3850  -  total flux cleaned = -0.00520918 Jy
! Component: 3900  -  total flux cleaned = -0.00527228 Jy
! Component: 3950  -  total flux cleaned = -0.00525981 Jy
! Component: 4000  -  total flux cleaned = -0.00533466 Jy
! Component: 4050  -  total flux cleaned = -0.00537194 Jy
! Total flux subtracted in 4096 components = -0.00538423 Jy
! Clean residual min=-0.000650 max=0.000662 Jy/beam
! Clean residual mean=0.000001 rms=0.000225 Jy/beam
! Combined flux in latest and established models = 0.262769 Jy
keep
! Adding 313 model components to the UV plane model.
! The established model now contains 454 components and 0.262769 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1340+6923_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.948 x 4.549 at 88.06 degrees (North through East)
! Clean map  min=-0.0013102  max=0.1778 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1340+6923_S_map.fits
wmodel /vlbi/uf001/uva//J1340+6923_S_map.mod
! Writing 454 model components to file: /vlbi/uf001/uva//J1340+6923_S_map.mod
wobs   /vlbi/uf001/uva//J1340+6923_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1340+6923_S_uvs.fits
wwins  /vlbi/uf001/uva//J1340+6923_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1340+6923_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.177795 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000224311 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.378487 0.378487 0.756975 1.51395 3.0279 6.0558 12.1116 24.2232 48.4464 96.8928
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.177 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  792.628 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1340+6923_S_dfm.log closed on Mon Jan 14 02:32:13 2019