! Started logfile: /vlbi/uf001/uva//J1339-1819_S_b_dfm.log on Mon Jan 14 02:31:25 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1339-1819_S_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1339-1819_S_b_uva.fits
! AN table 1: 58 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.871921 visibilities/baseline/integration-bin.
! Found source: J1339-1819
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 4248 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1339-1819_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007263Jy  sigma=18.266635
! Fit after  self-cal, rms=0.929907Jy  sigma=16.857098
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.581 mas, bmaj=15.41 mas, bpa=-19.85 degrees
! Estimated noise=0.945707 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0559256 Jy
! Component: 100  -  total flux cleaned = 0.0683405 Jy
! Total flux subtracted in 100 components = 0.0683405 Jy
! Clean residual min=-0.004917 max=0.004838 Jy/beam
! Clean residual mean=0.000010 rms=0.001213 Jy/beam
! Combined flux in latest and established models = 0.0683405 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0683405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080883Jy  sigma=1.216912
! Fit after  self-cal, rms=0.080525Jy  sigma=1.211130
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.044 mas, bmaj=16.11 mas, bpa=-18.87 degrees
! Estimated noise=0.628358 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00553731 Jy
! Component: 100  -  total flux cleaned = 0.00809725 Jy
! Component: 150  -  total flux cleaned = 0.00903047 Jy
! Component: 200  -  total flux cleaned = 0.00980011 Jy
! Total flux subtracted in 200 components = 0.00980011 Jy
! Clean residual min=-0.002982 max=0.003504 Jy/beam
! Clean residual mean=-0.000001 rms=0.000767 Jy/beam
! Combined flux in latest and established models = 0.0781406 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 54 components and 0.0781406 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080154Jy  sigma=1.202974
! Fit after  self-cal, rms=0.080146Jy  sigma=1.202800
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.044 x 16.11 at -18.87 degrees (North through East)
! Clean map  min=-0.0028479  max=0.073292 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        0.97     HN        1.05     KP        0.94     
!   LA        0.97     MK        1.05     NL        1.02     OV        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        1.02     KP        0.98     
!   LA        1.02     MK        0.97     NL        0.94     OV        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.09     KP        1.00     
!   LA        1.01     MK        1.01     NL        0.99     OV        1.05     
! 
! 
! Fit before self-cal, rms=0.080146Jy  sigma=1.202800
! Fit after  self-cal, rms=0.078484Jy  sigma=1.200692
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.073 mas, bmaj=16.15 mas, bpa=-18.97 degrees
! Estimated noise=0.624431 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000593566 Jy
! Component: 100  -  total flux cleaned = -0.000444413 Jy
! Component: 150  -  total flux cleaned = -0.000322915 Jy
! Component: 200  -  total flux cleaned = -0.000188399 Jy
! Total flux subtracted in 200 components = -0.000188399 Jy
! Clean residual min=-0.002756 max=0.003423 Jy/beam
! Clean residual mean=-0.000000 rms=0.000712 Jy/beam
! Combined flux in latest and established models = 0.0779522 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 69 components and 0.0779522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078447Jy  sigma=1.200066
! Fit after  self-cal, rms=0.078474Jy  sigma=1.199904
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078474Jy  sigma=1.199904
! Fit after  self-cal, rms=0.078745Jy  sigma=1.198426
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.079 mas, bmaj=16.16 mas, bpa=-18.95 degrees
! Estimated noise=0.627394 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00053746 Jy
! Component: 100  -  total flux cleaned = 0.00057211 Jy
! Component: 150  -  total flux cleaned = 0.0006226 Jy
! Component: 200  -  total flux cleaned = 0.000622255 Jy
! Total flux subtracted in 200 components = 0.000622255 Jy
! Clean residual min=-0.002715 max=0.003412 Jy/beam
! Clean residual mean=0.000001 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.0785745 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 83 components and 0.0785745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078715Jy  sigma=1.197950
! Fit after  self-cal, rms=0.078713Jy  sigma=1.197878
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-114, -76.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000549213 Jy
! Component: 100  -  total flux cleaned = 0.000230139 Jy
! Component: 150  -  total flux cleaned = 0.000287446 Jy
! Component: 200  -  total flux cleaned = 0.000141749 Jy
! Total flux subtracted in 200 components = 0.000141749 Jy
! Clean residual min=-0.001954 max=0.002029 Jy/beam
! Clean residual mean=-0.000001 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.0787162 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 102 components and 0.0787162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078535Jy  sigma=1.195009
! Fit after  self-cal, rms=0.078525Jy  sigma=1.194627
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078525Jy  sigma=1.194627
! Fit after  self-cal, rms=0.078106Jy  sigma=1.194347
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.077 mas, bmaj=16.11 mas, bpa=-18.93 degrees
! Estimated noise=0.629609 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000378255 Jy
! Component: 100  -  total flux cleaned = 0.000632583 Jy
! Component: 150  -  total flux cleaned = 0.000760758 Jy
! Component: 200  -  total flux cleaned = 0.000759752 Jy
! Total flux subtracted in 200 components = 0.000759752 Jy
! Clean residual min=-0.001906 max=0.002038 Jy/beam
! Clean residual mean=-0.000001 rms=0.000533 Jy/beam
! Combined flux in latest and established models = 0.079476 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 114 components and 0.079476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078040Jy  sigma=1.193365
! Fit after  self-cal, rms=0.078025Jy  sigma=1.193280
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000160677 Jy
! Component: 100  -  total flux cleaned = -0.000297487 Jy
! Component: 150  -  total flux cleaned = -0.000457509 Jy
! Component: 200  -  total flux cleaned = -0.000607349 Jy
! Total flux subtracted in 200 components = -0.000607349 Jy
! Clean residual min=-0.001875 max=0.002029 Jy/beam
! Clean residual mean=-0.000001 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.0788686 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 128 components and 0.0788686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077993Jy  sigma=1.192849
! Fit after  self-cal, rms=0.077991Jy  sigma=1.192826
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077991Jy  sigma=1.192826
! Fit after  self-cal, rms=0.077789Jy  sigma=1.192726
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.063 mas, bmaj=21.19 mas, bpa=-10.66 degrees
! Estimated noise=0.800836 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000127757 Jy
! Component: 100  -  total flux cleaned = 1.01064e-05 Jy
! Component: 150  -  total flux cleaned = -0.000128383 Jy
! Component: 200  -  total flux cleaned = -0.000188558 Jy
! Total flux subtracted in 200 components = -0.000188558 Jy
! Clean residual min=-0.002170 max=0.002541 Jy/beam
! Clean residual mean=-0.000002 rms=0.000686 Jy/beam
! Combined flux in latest and established models = 0.0786801 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 153 components and 0.0786801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077761Jy  sigma=1.192451
! Fit after  self-cal, rms=0.077753Jy  sigma=1.192406
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000448772 Jy
! Component: 100  -  total flux cleaned = -0.000537786 Jy
! Component: 150  -  total flux cleaned = -0.00056519 Jy
! Component: 200  -  total flux cleaned = -0.000640904 Jy
! Total flux subtracted in 200 components = -0.000640904 Jy
! Clean residual min=-0.002165 max=0.002400 Jy/beam
! Clean residual mean=-0.000003 rms=0.000667 Jy/beam
! Combined flux in latest and established models = 0.0780392 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 165 components and 0.0780392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077740Jy  sigma=1.192366
! Fit after  self-cal, rms=0.077738Jy  sigma=1.192344
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.072 mas, bmaj=16.08 mas, bpa=-18.92 degrees
! Estimated noise=0.632088 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.072 x 16.08 at -18.92 degrees (North through East)
! Clean map  min=-0.0027771  max=0.072375 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.599 mas, bmaj=15.42 mas, bpa=-19.82 degrees
! Estimated noise=0.96104 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0569246 Jy
! Component: 100  -  total flux cleaned = 0.0697121 Jy
! Component: 150  -  total flux cleaned = 0.0728622 Jy
! Component: 200  -  total flux cleaned = 0.0741155 Jy
! Total flux subtracted in 200 components = 0.0741155 Jy
! Clean residual min=-0.003782 max=0.004055 Jy/beam
! Clean residual mean=0.000009 rms=0.001022 Jy/beam
! Combined flux in latest and established models = 0.0741156 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0741156 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.072 mas, bmaj=16.08 mas, bpa=-18.92 degrees
! Estimated noise=0.632088 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00346483 Jy
! Component: 100  -  total flux cleaned = 0.0039417 Jy
! Component: 150  -  total flux cleaned = 0.00376464 Jy
! Component: 200  -  total flux cleaned = 0.00352991 Jy
! Total flux subtracted in 200 components = 0.00352991 Jy
! Clean residual min=-0.002130 max=0.002263 Jy/beam
! Clean residual mean=-0.000001 rms=0.000617 Jy/beam
! Combined flux in latest and established models = 0.0776455 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 47 components and 0.0776455 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.063 mas, bmaj=21.19 mas, bpa=-10.66 degrees
! Estimated noise=0.800836 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00179388 Jy
! Component: 100  -  total flux cleaned = 0.00130114 Jy
! Component: 150  -  total flux cleaned = 0.00083477 Jy
! Component: 200  -  total flux cleaned = 0.00060962 Jy
! Total flux subtracted in 200 components = 0.00060962 Jy
! Clean residual min=-0.002425 max=0.002603 Jy/beam
! Clean residual mean=-0.000003 rms=0.000714 Jy/beam
! Combined flux in latest and established models = 0.0782551 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000197737 Jy
! Component: 100  -  total flux cleaned = -0.000337905 Jy
! Component: 150  -  total flux cleaned = -0.000370865 Jy
! Component: 200  -  total flux cleaned = -0.000371568 Jy
! Total flux subtracted in 200 components = -0.000371568 Jy
! Clean residual min=-0.002292 max=0.002470 Jy/beam
! Clean residual mean=-0.000003 rms=0.000679 Jy/beam
! Combined flux in latest and established models = 0.0778835 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 97 components and 0.0778835 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.072 mas, bmaj=16.08 mas, bpa=-18.92 degrees
! Estimated noise=0.632088 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000532111 Jy
! Component: 100  -  total flux cleaned = 0.000438278 Jy
! Component: 150  -  total flux cleaned = 0.000399418 Jy
! Component: 200  -  total flux cleaned = 0.000398221 Jy
! Total flux subtracted in 200 components = 0.000398221 Jy
! Clean residual min=-0.001887 max=0.001885 Jy/beam
! Clean residual mean=-0.000001 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.0782817 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 116 components and 0.0782818 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077762Jy  sigma=1.192810
! Fit after  self-cal, rms=0.077749Jy  sigma=1.192681
wmodel J1339-1819_S_b_map.mod
! Writing 116 model components to file: J1339-1819_S_b_map.mod
wobs   J1339-1819_S_b_uvs.fits
! Writing UV FITS file: J1339-1819_S_b_uvs.fits
wwins  J1339-1819_S_b_map.win
! wwins: Wrote 2 windows to J1339-1819_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000141691 Jy
! Component: 100  -  total flux cleaned = 0.000205806 Jy
! Component: 150  -  total flux cleaned = 0.000327396 Jy
! Component: 200  -  total flux cleaned = 0.00044204 Jy
! Component: 250  -  total flux cleaned = 0.000577946 Jy
! Component: 300  -  total flux cleaned = 0.000707608 Jy
! Component: 350  -  total flux cleaned = 0.000707597 Jy
! Component: 400  -  total flux cleaned = 0.00077926 Jy
! Component: 450  -  total flux cleaned = 0.00080238 Jy
! Component: 500  -  total flux cleaned = 0.000847939 Jy
! Component: 550  -  total flux cleaned = 0.000891186 Jy
! Component: 600  -  total flux cleaned = 0.000869797 Jy
! Component: 650  -  total flux cleaned = 0.000869784 Jy
! Component: 700  -  total flux cleaned = 0.000869851 Jy
! Component: 750  -  total flux cleaned = 0.000909156 Jy
! Component: 800  -  total flux cleaned = 0.000871012 Jy
! Component: 850  -  total flux cleaned = 0.000871417 Jy
! Component: 900  -  total flux cleaned = 0.00085342 Jy
! Component: 950  -  total flux cleaned = 0.000871262 Jy
! Component: 1000  -  total flux cleaned = 0.000817941 Jy
! Component: 1050  -  total flux cleaned = 0.000800527 Jy
! Component: 1100  -  total flux cleaned = 0.000749432 Jy
! Component: 1150  -  total flux cleaned = 0.00073275 Jy
! Component: 1200  -  total flux cleaned = 0.000699751 Jy
! Component: 1250  -  total flux cleaned = 0.000699614 Jy
! Component: 1300  -  total flux cleaned = 0.000746736 Jy
! Component: 1350  -  total flux cleaned = 0.000637279 Jy
! Component: 1400  -  total flux cleaned = 0.000652568 Jy
! Component: 1450  -  total flux cleaned = 0.000622114 Jy
! Component: 1500  -  total flux cleaned = 0.000577278 Jy
! Component: 1550  -  total flux cleaned = 0.000591857 Jy
! Component: 1600  -  total flux cleaned = 0.000591627 Jy
! Component: 1650  -  total flux cleaned = 0.000591512 Jy
! Component: 1700  -  total flux cleaned = 0.000591308 Jy
! Component: 1750  -  total flux cleaned = 0.000591105 Jy
! Component: 1800  -  total flux cleaned = 0.000577364 Jy
! Component: 1850  -  total flux cleaned = 0.000590698 Jy
! Component: 1900  -  total flux cleaned = 0.000564031 Jy
! Component: 1950  -  total flux cleaned = 0.000603408 Jy
! Component: 2000  -  total flux cleaned = 0.00059045 Jy
! Component: 2050  -  total flux cleaned = 0.00062897 Jy
! Component: 2100  -  total flux cleaned = 0.000692093 Jy
! Component: 2150  -  total flux cleaned = 0.000717106 Jy
! Component: 2200  -  total flux cleaned = 0.000766499 Jy
! Component: 2250  -  total flux cleaned = 0.000766293 Jy
! Component: 2300  -  total flux cleaned = 0.000802379 Jy
! Component: 2350  -  total flux cleaned = 0.000802289 Jy
! Component: 2400  -  total flux cleaned = 0.000825909 Jy
! Component: 2450  -  total flux cleaned = 0.000825962 Jy
! Component: 2500  -  total flux cleaned = 0.000826157 Jy
! Component: 2550  -  total flux cleaned = 0.000849343 Jy
! Component: 2600  -  total flux cleaned = 0.00090609 Jy
! Component: 2650  -  total flux cleaned = 0.000894709 Jy
! Component: 2700  -  total flux cleaned = 0.000905782 Jy
! Component: 2750  -  total flux cleaned = 0.000905693 Jy
! Component: 2800  -  total flux cleaned = 0.000938491 Jy
! Component: 2850  -  total flux cleaned = 0.000927582 Jy
! Component: 2900  -  total flux cleaned = 0.000927548 Jy
! Component: 2950  -  total flux cleaned = 0.000916981 Jy
! Component: 3000  -  total flux cleaned = 0.000885355 Jy
! Component: 3050  -  total flux cleaned = 0.000906319 Jy
! Component: 3100  -  total flux cleaned = 0.00091668 Jy
! Component: 3150  -  total flux cleaned = 0.000875359 Jy
! Component: 3200  -  total flux cleaned = 0.000875393 Jy
! Component: 3250  -  total flux cleaned = 0.000865268 Jy
! Component: 3300  -  total flux cleaned = 0.000885421 Jy
! Component: 3350  -  total flux cleaned = 0.00084527 Jy
! Component: 3400  -  total flux cleaned = 0.000855189 Jy
! Component: 3450  -  total flux cleaned = 0.000874944 Jy
! Component: 3500  -  total flux cleaned = 0.000835509 Jy
! Component: 3550  -  total flux cleaned = 0.000845274 Jy
! Component: 3600  -  total flux cleaned = 0.000864675 Jy
! Component: 3650  -  total flux cleaned = 0.000874254 Jy
! Component: 3700  -  total flux cleaned = 0.000845331 Jy
! Component: 3750  -  total flux cleaned = 0.000826205 Jy
! Component: 3800  -  total flux cleaned = 0.000826151 Jy
! Component: 3850  -  total flux cleaned = 0.00080727 Jy
! Component: 3900  -  total flux cleaned = 0.000807259 Jy
! Component: 3950  -  total flux cleaned = 0.000816725 Jy
! Component: 4000  -  total flux cleaned = 0.000816739 Jy
! Component: 4050  -  total flux cleaned = 0.000807408 Jy
! Total flux subtracted in 4096 components = 0.000807449 Jy
! Clean residual min=-0.000491 max=0.000655 Jy/beam
! Clean residual mean=-0.000003 rms=0.000172 Jy/beam
! Combined flux in latest and established models = 0.0790892 Jy
keep
! Adding 264 model components to the UV plane model.
! The established model now contains 380 components and 0.0790892 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1339-1819_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.072 x 16.08 at -18.92 degrees (North through East)
! Clean map  min=-0.0024053  max=0.072244 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1339-1819_S_b_map.fits
wmodel /vlbi/uf001/uva//J1339-1819_S_b_map.mod
! Writing 380 model components to file: /vlbi/uf001/uva//J1339-1819_S_b_map.mod
wobs   /vlbi/uf001/uva//J1339-1819_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1339-1819_S_b_uvs.fits
wwins  /vlbi/uf001/uva//J1339-1819_S_b_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J1339-1819_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.072244 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00016349 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.678907 0.678907 1.35781 2.71563 5.43125 10.8625 21.725 43.45 86.9001
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.072 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  441.886 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1339-1819_S_b_dfm.log closed on Mon Jan 14 02:31:29 2019