! Started logfile: /vlbi/uf001/uva//J1339-1819_S_a_dfm.log on Mon Jan 14 02:31:19 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1339-1819_S_a_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1339-1819_S_a_uva.fits
! AN table 1: 110 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.852525 visibilities/baseline/integration-bin.
! Found source: J1339-1819
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 10128 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1339-1819_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007878Jy  sigma=17.901375
! Fit after  self-cal, rms=0.932839Jy  sigma=16.573792
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.429 mas, bmaj=6.395 mas, bpa=-3.502 degrees
! Estimated noise=0.627701 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0544099 Jy
! Component: 100  -  total flux cleaned = 0.066277 Jy
! Total flux subtracted in 100 components = 0.066277 Jy
! Clean residual min=-0.003426 max=0.003618 Jy/beam
! Clean residual mean=0.000002 rms=0.000908 Jy/beam
! Combined flux in latest and established models = 0.066277 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.066277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070591Jy  sigma=1.220215
! Fit after  self-cal, rms=0.069530Jy  sigma=1.203388
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.866 mas, bmaj=7.168 mas, bpa=-1.57 degrees
! Estimated noise=0.403973 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00425517 Jy
! Component: 100  -  total flux cleaned = 0.00584081 Jy
! Component: 150  -  total flux cleaned = 0.00611568 Jy
! Component: 200  -  total flux cleaned = 0.00632566 Jy
! Total flux subtracted in 200 components = 0.00632566 Jy
! Clean residual min=-0.002545 max=0.003010 Jy/beam
! Clean residual mean=0.000005 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.0726027 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 23 components and 0.0726027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069304Jy  sigma=1.199161
! Fit after  self-cal, rms=0.069316Jy  sigma=1.199062
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.866 x 7.168 at -1.57 degrees (North through East)
! Clean map  min=-0.0024802  max=0.070797 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.93     HN        1.01     KP        1.01     
!   LA        0.93     MK        0.99     NL        1.19     OV        0.99     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.94     HN        1.05     KP        0.97     
!   LA        0.93     MK        0.99     NL        1.25     OV        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.93     HN        1.05     KP        1.02     
!   LA        0.95     MK        1.00     NL        1.22     OV        0.95     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.069316Jy  sigma=1.199062
! Fit after  self-cal, rms=0.069697Jy  sigma=1.193504
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.864 mas, bmaj=7.175 mas, bpa=-1.32 degrees
! Estimated noise=0.40232 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.38986e-05 Jy
! Component: 100  -  total flux cleaned = 5.3153e-05 Jy
! Component: 150  -  total flux cleaned = 7.1565e-05 Jy
! Component: 200  -  total flux cleaned = 7.11309e-05 Jy
! Total flux subtracted in 200 components = 7.11309e-05 Jy
! Clean residual min=-0.001989 max=0.002317 Jy/beam
! Clean residual mean=0.000004 rms=0.000545 Jy/beam
! Combined flux in latest and established models = 0.0726738 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 31 components and 0.0726738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069679Jy  sigma=1.193266
! Fit after  self-cal, rms=0.069762Jy  sigma=1.192863
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069762Jy  sigma=1.192863
! Fit after  self-cal, rms=0.070222Jy  sigma=1.189135
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.866 mas, bmaj=7.189 mas, bpa=-1.344 degrees
! Estimated noise=0.40361 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.78277e-05 Jy
! Component: 100  -  total flux cleaned = 9.8123e-05 Jy
! Component: 150  -  total flux cleaned = 9.85398e-05 Jy
! Component: 200  -  total flux cleaned = 0.000112183 Jy
! Total flux subtracted in 200 components = 0.000112183 Jy
! Clean residual min=-0.002004 max=0.001915 Jy/beam
! Clean residual mean=0.000003 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.072786 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 37 components and 0.072786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070214Jy  sigma=1.189005
! Fit after  self-cal, rms=0.070253Jy  sigma=1.188864
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.19746e-05 Jy
! Component: 100  -  total flux cleaned = 2.97375e-05 Jy
! Component: 150  -  total flux cleaned = 2.98853e-05 Jy
! Component: 200  -  total flux cleaned = 2.04236e-05 Jy
! Total flux subtracted in 200 components = 2.04236e-05 Jy
! Clean residual min=-0.001977 max=0.001946 Jy/beam
! Clean residual mean=0.000003 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.0728064 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 42 components and 0.0728064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070249Jy  sigma=1.188797
! Fit after  self-cal, rms=0.070255Jy  sigma=1.188779
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070255Jy  sigma=1.188779
! Fit after  self-cal, rms=0.070426Jy  sigma=1.188382
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.867 mas, bmaj=7.182 mas, bpa=-1.319 degrees
! Estimated noise=0.403031 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.38835e-05 Jy
! Component: 100  -  total flux cleaned = -0.000128932 Jy
! Component: 150  -  total flux cleaned = -0.000148466 Jy
! Component: 200  -  total flux cleaned = -0.000157641 Jy
! Total flux subtracted in 200 components = -0.000157641 Jy
! Clean residual min=-0.001964 max=0.001848 Jy/beam
! Clean residual mean=0.000003 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.0726488 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 42 components and 0.0726488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070422Jy  sigma=1.188334
! Fit after  self-cal, rms=0.070436Jy  sigma=1.188306
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.56577e-05 Jy
! Component: 100  -  total flux cleaned = -3.57392e-05 Jy
! Component: 150  -  total flux cleaned = -4.35882e-05 Jy
! Component: 200  -  total flux cleaned = -5.13516e-05 Jy
! Total flux subtracted in 200 components = -5.13516e-05 Jy
! Clean residual min=-0.001956 max=0.001869 Jy/beam
! Clean residual mean=0.000003 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.0725974 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 44 components and 0.0725974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070434Jy  sigma=1.188274
! Fit after  self-cal, rms=0.070435Jy  sigma=1.188271
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070435Jy  sigma=1.188271
! Fit after  self-cal, rms=0.070391Jy  sigma=1.188264
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.189 mas, bmaj=14 mas, bpa=7.059 degrees
! Estimated noise=0.557329 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000328182 Jy
! Component: 100  -  total flux cleaned = -0.000328737 Jy
! Component: 150  -  total flux cleaned = -0.000339408 Jy
! Component: 200  -  total flux cleaned = -0.000338898 Jy
! Total flux subtracted in 200 components = -0.000338898 Jy
! Clean residual min=-0.001947 max=0.002096 Jy/beam
! Clean residual mean=0.000008 rms=0.000639 Jy/beam
! Combined flux in latest and established models = 0.0722585 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 48 components and 0.0722585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070389Jy  sigma=1.188248
! Fit after  self-cal, rms=0.070390Jy  sigma=1.188227
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.59871e-05 Jy
! Component: 100  -  total flux cleaned = -2.74425e-05 Jy
! Component: 150  -  total flux cleaned = -2.59539e-05 Jy
! Component: 200  -  total flux cleaned = -1.81551e-05 Jy
! Total flux subtracted in 200 components = -1.81551e-05 Jy
! Clean residual min=-0.001950 max=0.002085 Jy/beam
! Clean residual mean=0.000008 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.0722404 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 49 components and 0.0722404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070391Jy  sigma=1.188232
! Fit after  self-cal, rms=0.070391Jy  sigma=1.188219
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.869 mas, bmaj=7.178 mas, bpa=-1.259 degrees
! Estimated noise=0.402792 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.869 x 7.178 at -1.259 degrees (North through East)
! Clean map  min=-0.0018857  max=0.070541 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.428 mas, bmaj=6.395 mas, bpa=-3.237 degrees
! Estimated noise=0.628112 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0550511 Jy
! Component: 100  -  total flux cleaned = 0.0670996 Jy
! Component: 150  -  total flux cleaned = 0.0695485 Jy
! Component: 200  -  total flux cleaned = 0.0704127 Jy
! Total flux subtracted in 200 components = 0.0704127 Jy
! Clean residual min=-0.002958 max=0.003114 Jy/beam
! Clean residual mean=0.000002 rms=0.000744 Jy/beam
! Combined flux in latest and established models = 0.0704127 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0704127 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.869 mas, bmaj=7.178 mas, bpa=-1.259 degrees
! Estimated noise=0.402792 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00189211 Jy
! Component: 100  -  total flux cleaned = 0.00202949 Jy
! Component: 150  -  total flux cleaned = 0.00206565 Jy
! Component: 200  -  total flux cleaned = 0.00206589 Jy
! Total flux subtracted in 200 components = 0.00206589 Jy
! Clean residual min=-0.002101 max=0.001987 Jy/beam
! Clean residual mean=0.000003 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.0724786 Jy
! Adding 10 model components to the UV plane model.
! The established model now contains 22 components and 0.0724786 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.189 mas, bmaj=14 mas, bpa=7.059 degrees
! Estimated noise=0.557329 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000120269 Jy
! Component: 100  -  total flux cleaned = -0.00017278 Jy
! Component: 150  -  total flux cleaned = -0.000193558 Jy
! Component: 200  -  total flux cleaned = -0.000208938 Jy
! Total flux subtracted in 200 components = -0.000208938 Jy
! Clean residual min=-0.001970 max=0.002086 Jy/beam
! Clean residual mean=0.000008 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.0722697 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.7692e-07 Jy
! Component: 100  -  total flux cleaned = -1.30749e-06 Jy
! Component: 150  -  total flux cleaned = -1.15507e-06 Jy
! Component: 200  -  total flux cleaned = -8.88723e-07 Jy
! Total flux subtracted in 200 components = -8.88723e-07 Jy
! Clean residual min=-0.001956 max=0.002080 Jy/beam
! Clean residual mean=0.000008 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.0722688 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 40 components and 0.0722688 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.869 mas, bmaj=7.178 mas, bpa=-1.259 degrees
! Estimated noise=0.402792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000254661 Jy
! Component: 100  -  total flux cleaned = 0.000236345 Jy
! Component: 150  -  total flux cleaned = 0.000193354 Jy
! Component: 200  -  total flux cleaned = 0.000181149 Jy
! Total flux subtracted in 200 components = 0.000181149 Jy
! Clean residual min=-0.002000 max=0.001898 Jy/beam
! Clean residual mean=0.000003 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.0724499 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 51 components and 0.0724499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070396Jy  sigma=1.188297
! Fit after  self-cal, rms=0.070393Jy  sigma=1.188286
wmodel J1339-1819_S_a_map.mod
! Writing 51 model components to file: J1339-1819_S_a_map.mod
wobs   J1339-1819_S_a_uvs.fits
! Writing UV FITS file: J1339-1819_S_a_uvs.fits
wwins  J1339-1819_S_a_map.win
! wwins: Wrote 1 windows to J1339-1819_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000472793 Jy
! Component: 100  -  total flux cleaned = -0.000898695 Jy
! Component: 150  -  total flux cleaned = -0.000930557 Jy
! Component: 200  -  total flux cleaned = -0.000930787 Jy
! Component: 250  -  total flux cleaned = -0.000762083 Jy
! Component: 300  -  total flux cleaned = -0.000543724 Jy
! Component: 350  -  total flux cleaned = -0.000330998 Jy
! Component: 400  -  total flux cleaned = -0.00012394 Jy
! Component: 450  -  total flux cleaned = -2.23605e-05 Jy
! Component: 500  -  total flux cleaned = 5.08163e-05 Jy
! Component: 550  -  total flux cleaned = 7.43859e-05 Jy
! Component: 600  -  total flux cleaned = 0.000121236 Jy
! Component: 650  -  total flux cleaned = 0.000167288 Jy
! Component: 700  -  total flux cleaned = 0.000234981 Jy
! Component: 750  -  total flux cleaned = 0.000279357 Jy
! Component: 800  -  total flux cleaned = 0.000387264 Jy
! Component: 850  -  total flux cleaned = 0.00042938 Jy
! Component: 900  -  total flux cleaned = 0.000553852 Jy
! Component: 950  -  total flux cleaned = 0.000574328 Jy
! Component: 1000  -  total flux cleaned = 0.000594243 Jy
! Component: 1050  -  total flux cleaned = 0.000652668 Jy
! Component: 1100  -  total flux cleaned = 0.000632413 Jy
! Component: 1150  -  total flux cleaned = 0.000555966 Jy
! Component: 1200  -  total flux cleaned = 0.000480565 Jy
! Component: 1250  -  total flux cleaned = 0.000406809 Jy
! Component: 1300  -  total flux cleaned = 0.00037065 Jy
! Component: 1350  -  total flux cleaned = 0.000406513 Jy
! Component: 1400  -  total flux cleaned = 0.000352938 Jy
! Component: 1450  -  total flux cleaned = 0.000283475 Jy
! Component: 1500  -  total flux cleaned = 0.00024926 Jy
! Component: 1550  -  total flux cleaned = 0.000232306 Jy
! Component: 1600  -  total flux cleaned = 0.000148391 Jy
! Component: 1650  -  total flux cleaned = 4.91792e-05 Jy
! Component: 1700  -  total flux cleaned = 4.93554e-05 Jy
! Component: 1750  -  total flux cleaned = -3.09497e-05 Jy
! Component: 1800  -  total flux cleaned = -6.2687e-05 Jy
! Component: 1850  -  total flux cleaned = -1.58435e-05 Jy
! Component: 1900  -  total flux cleaned = -6.12683e-07 Jy
! Component: 1950  -  total flux cleaned = -4.67707e-05 Jy
! Component: 2000  -  total flux cleaned = -7.72348e-05 Jy
! Component: 2050  -  total flux cleaned = -0.000107249 Jy
! Component: 2100  -  total flux cleaned = -0.000151694 Jy
! Component: 2150  -  total flux cleaned = -0.000151663 Jy
! Component: 2200  -  total flux cleaned = -0.000194761 Jy
! Component: 2250  -  total flux cleaned = -0.000194663 Jy
! Component: 2300  -  total flux cleaned = -0.000208853 Jy
! Component: 2350  -  total flux cleaned = -0.000208875 Jy
! Component: 2400  -  total flux cleaned = -0.000209113 Jy
! Component: 2450  -  total flux cleaned = -0.000209136 Jy
! Component: 2500  -  total flux cleaned = -0.000154707 Jy
! Component: 2550  -  total flux cleaned = -0.000194986 Jy
! Component: 2600  -  total flux cleaned = -0.000194819 Jy
! Component: 2650  -  total flux cleaned = -0.000181551 Jy
! Component: 2700  -  total flux cleaned = -0.000168362 Jy
! Component: 2750  -  total flux cleaned = -0.000155213 Jy
! Component: 2800  -  total flux cleaned = -0.000154979 Jy
! Component: 2850  -  total flux cleaned = -7.86783e-05 Jy
! Component: 2900  -  total flux cleaned = -0.000179566 Jy
! Component: 2950  -  total flux cleaned = -7.96822e-05 Jy
! Component: 3000  -  total flux cleaned = -0.000141647 Jy
! Component: 3050  -  total flux cleaned = -0.000129341 Jy
! Component: 3100  -  total flux cleaned = -9.29304e-05 Jy
! Component: 3150  -  total flux cleaned = -6.88575e-05 Jy
! Component: 3200  -  total flux cleaned = -0.000164543 Jy
! Component: 3250  -  total flux cleaned = -0.00011699 Jy
! Component: 3300  -  total flux cleaned = -0.000105327 Jy
! Component: 3350  -  total flux cleaned = -9.36587e-05 Jy
! Component: 3400  -  total flux cleaned = -8.20968e-05 Jy
! Component: 3450  -  total flux cleaned = -7.04298e-05 Jy
! Component: 3500  -  total flux cleaned = -2.4802e-05 Jy
! Component: 3550  -  total flux cleaned = -2.47666e-05 Jy
! Component: 3600  -  total flux cleaned = -2.46734e-05 Jy
! Component: 3650  -  total flux cleaned = -2.48042e-06 Jy
! Component: 3700  -  total flux cleaned = 8.5192e-06 Jy
! Component: 3750  -  total flux cleaned = 3.04387e-05 Jy
! Component: 3800  -  total flux cleaned = 1.95337e-05 Jy
! Component: 3850  -  total flux cleaned = 3.04531e-05 Jy
! Component: 3900  -  total flux cleaned = 6.27807e-05 Jy
! Component: 3950  -  total flux cleaned = 0.000116153 Jy
! Component: 4000  -  total flux cleaned = 0.000126846 Jy
! Component: 4050  -  total flux cleaned = 0.00013749 Jy
! Total flux subtracted in 4096 components = 0.000137487 Jy
! Clean residual min=-0.000539 max=0.000621 Jy/beam
! Clean residual mean=0.000002 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.0725874 Jy
keep
! Adding 289 model components to the UV plane model.
! The established model now contains 340 components and 0.0725873 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1339-1819_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.869 x 7.178 at -1.259 degrees (North through East)
! Clean map  min=-0.0014811  max=0.070436 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1339-1819_S_a_map.fits
wmodel /vlbi/uf001/uva//J1339-1819_S_a_map.mod
! Writing 340 model components to file: /vlbi/uf001/uva//J1339-1819_S_a_map.mod
wobs   /vlbi/uf001/uva//J1339-1819_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1339-1819_S_a_uvs.fits
wwins  /vlbi/uf001/uva//J1339-1819_S_a_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J1339-1819_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.070436 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000184952 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.787747 0.787747 1.57549 3.15099 6.30198 12.604 25.2079 50.4158
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.07 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  380.832 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1339-1819_S_a_dfm.log closed on Mon Jan 14 02:31:24 2019