! Started logfile: /vlbi/uf001/uva//J1337+0206_S_dfm.log on Mon Jan 14 02:30:29 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1337+0206_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1337+0206_S_uva.fits
! AN table 1: 72 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.932407 visibilities/baseline/integration-bin.
! Found source: J1337+0206
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 9063 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1337+0206_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019299Jy  sigma=19.644367
! Fit after  self-cal, rms=0.839937Jy  sigma=16.169372
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.791 mas, bmaj=7.049 mas, bpa=-4.574 degrees
! Estimated noise=0.544758 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.118568 Jy
! Component: 100  -  total flux cleaned = 0.154345 Jy
! Total flux subtracted in 100 components = 0.154345 Jy
! Clean residual min=-0.008614 max=0.026833 Jy/beam
! Clean residual mean=0.000017 rms=0.002696 Jy/beam
! Combined flux in latest and established models = 0.154345 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.154345 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105600Jy  sigma=1.550479
! Fit after  self-cal, rms=0.105543Jy  sigma=1.549357
! Inverting map 
! Added new window around map position (6.5, 1.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0240531 Jy
! Component: 100  -  total flux cleaned = 0.0373837 Jy
! Total flux subtracted in 100 components = 0.0373837 Jy
! Clean residual min=-0.006472 max=0.015480 Jy/beam
! Clean residual mean=0.000009 rms=0.002013 Jy/beam
! Combined flux in latest and established models = 0.191728 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 20 components and 0.191728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098445Jy  sigma=1.385853
! Fit after  self-cal, rms=0.097624Jy  sigma=1.369941
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116278 Jy
! Component: 100  -  total flux cleaned = 0.0191213 Jy
! Total flux subtracted in 100 components = 0.0191213 Jy
! Clean residual min=-0.005762 max=0.010527 Jy/beam
! Clean residual mean=0.000006 rms=0.001709 Jy/beam
! Combined flux in latest and established models = 0.21085 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 32 components and 0.21085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095533Jy  sigma=1.322686
! Fit after  self-cal, rms=0.095333Jy  sigma=1.319204
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.257 mas, bmaj=7.728 mas, bpa=-3.899 degrees
! Estimated noise=0.398957 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00917868 Jy
! Component: 100  -  total flux cleaned = 0.0154256 Jy
! Component: 150  -  total flux cleaned = 0.0199651 Jy
! Component: 200  -  total flux cleaned = 0.0232942 Jy
! Total flux subtracted in 200 components = 0.0232942 Jy
! Clean residual min=-0.005672 max=0.007979 Jy/beam
! Clean residual mean=0.000008 rms=0.001481 Jy/beam
! Combined flux in latest and established models = 0.234144 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 68 components and 0.234144 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093955Jy  sigma=1.291916
! Fit after  self-cal, rms=0.093897Jy  sigma=1.290570
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.257 x 7.728 at -3.899 degrees (North through East)
! Clean map  min=-0.0057542  max=0.14973 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        0.96     KP        0.97     
!   LA        0.93     MK        1.09     NL        1.07     OV        0.99     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        0.98     KP        0.97     
!   LA        0.94     MK        1.04     NL        1.17     OV        1.02     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        0.98     KP        0.98     
!   LA        0.93     MK        1.05     NL        1.12     OV        0.99     
!   PT        0.98     SC        1.06     
! 
! 
! Fit before self-cal, rms=0.093897Jy  sigma=1.290570
! Fit after  self-cal, rms=0.095900Jy  sigma=1.271467
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.307 mas, bmaj=7.849 mas, bpa=-3.796 degrees
! Estimated noise=0.404539 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00297497 Jy
! Component: 100  -  total flux cleaned = -0.0035882 Jy
! Component: 150  -  total flux cleaned = -0.00383102 Jy
! Component: 200  -  total flux cleaned = -0.00405502 Jy
! Total flux subtracted in 200 components = -0.00405502 Jy
! Clean residual min=-0.005138 max=0.006236 Jy/beam
! Clean residual mean=0.000001 rms=0.001302 Jy/beam
! Combined flux in latest and established models = 0.230089 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 82 components and 0.230089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095690Jy  sigma=1.268968
! Fit after  self-cal, rms=0.095704Jy  sigma=1.268704
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095704Jy  sigma=1.268704
! Fit after  self-cal, rms=0.079656Jy  sigma=1.197629
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.315 mas, bmaj=7.878 mas, bpa=-3.893 degrees
! Estimated noise=0.407961 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.65969e-05 Jy
! Component: 100  -  total flux cleaned = -0.000158355 Jy
! Component: 150  -  total flux cleaned = -0.00040453 Jy
! Component: 200  -  total flux cleaned = -0.000669735 Jy
! Total flux subtracted in 200 components = -0.000669735 Jy
! Clean residual min=-0.002395 max=0.002157 Jy/beam
! Clean residual mean=0.000006 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.229419 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 95 components and 0.229419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079530Jy  sigma=1.195049
! Fit after  self-cal, rms=0.079590Jy  sigma=1.194549
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000352284 Jy
! Component: 100  -  total flux cleaned = -0.000440369 Jy
! Component: 150  -  total flux cleaned = -0.00051901 Jy
! Component: 200  -  total flux cleaned = -0.000555107 Jy
! Total flux subtracted in 200 components = -0.000555107 Jy
! Clean residual min=-0.002312 max=0.002119 Jy/beam
! Clean residual mean=0.000006 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.228864 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 105 components and 0.228864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079549Jy  sigma=1.193699
! Fit after  self-cal, rms=0.079544Jy  sigma=1.193664
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079544Jy  sigma=1.193664
! Fit after  self-cal, rms=0.078995Jy  sigma=1.190301
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.315 mas, bmaj=7.876 mas, bpa=-3.891 degrees
! Estimated noise=0.407911 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000891186 Jy
! Component: 100  -  total flux cleaned = -0.00122457 Jy
! Component: 150  -  total flux cleaned = -0.00126273 Jy
! Component: 200  -  total flux cleaned = -0.00132795 Jy
! Total flux subtracted in 200 components = -0.00132795 Jy
! Clean residual min=-0.001987 max=0.001999 Jy/beam
! Clean residual mean=0.000007 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.227536 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 109 components and 0.227536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078943Jy  sigma=1.189293
! Fit after  self-cal, rms=0.078933Jy  sigma=1.189223
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000107214 Jy
! Component: 100  -  total flux cleaned = -0.000133556 Jy
! Component: 150  -  total flux cleaned = -0.000158184 Jy
! Component: 200  -  total flux cleaned = -0.000181384 Jy
! Total flux subtracted in 200 components = -0.000181384 Jy
! Clean residual min=-0.001988 max=0.001970 Jy/beam
! Clean residual mean=0.000007 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.227355 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 112 components and 0.227355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078915Jy  sigma=1.188901
! Fit after  self-cal, rms=0.078912Jy  sigma=1.188889
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078912Jy  sigma=1.188889
! Fit after  self-cal, rms=0.079280Jy  sigma=1.188648
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.481 mas, bmaj=12.11 mas, bpa=-0.4778 degrees
! Estimated noise=0.509778 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000482644 Jy
! Component: 100  -  total flux cleaned = -0.000373833 Jy
! Component: 150  -  total flux cleaned = -0.000374067 Jy
! Component: 200  -  total flux cleaned = -0.000374211 Jy
! Total flux subtracted in 200 components = -0.000374211 Jy
! Clean residual min=-0.002082 max=0.001967 Jy/beam
! Clean residual mean=0.000013 rms=0.000548 Jy/beam
! Combined flux in latest and established models = 0.22698 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 121 components and 0.22698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079273Jy  sigma=1.188441
! Fit after  self-cal, rms=0.079274Jy  sigma=1.188352
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.50085e-05 Jy
! Component: 100  -  total flux cleaned = -5.36868e-05 Jy
! Component: 150  -  total flux cleaned = -5.33835e-05 Jy
! Component: 200  -  total flux cleaned = -8.35858e-05 Jy
! Total flux subtracted in 200 components = -8.35858e-05 Jy
! Clean residual min=-0.002060 max=0.001898 Jy/beam
! Clean residual mean=0.000012 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.226897 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 124 components and 0.226897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079271Jy  sigma=1.188341
! Fit after  self-cal, rms=0.079269Jy  sigma=1.188311
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.316 mas, bmaj=7.881 mas, bpa=-3.874 degrees
! Estimated noise=0.407977 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.316 x 7.881 at -3.874 degrees (North through East)
! Clean map  min=-0.0017492  max=0.15316 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.834 mas, bmaj=7.152 mas, bpa=-4.731 degrees
! Estimated noise=0.564499 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.121907 Jy
! Component: 100  -  total flux cleaned = 0.161462 Jy
! Component: 150  -  total flux cleaned = 0.183794 Jy
! Component: 200  -  total flux cleaned = 0.197238 Jy
! Total flux subtracted in 200 components = 0.197238 Jy
! Clean residual min=-0.003785 max=0.007008 Jy/beam
! Clean residual mean=0.000012 rms=0.001050 Jy/beam
! Combined flux in latest and established models = 0.197238 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.197238 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.316 mas, bmaj=7.881 mas, bpa=-3.874 degrees
! Estimated noise=0.407977 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107545 Jy
! Component: 100  -  total flux cleaned = 0.0172037 Jy
! Component: 150  -  total flux cleaned = 0.0212508 Jy
! Component: 200  -  total flux cleaned = 0.0239379 Jy
! Total flux subtracted in 200 components = 0.0239379 Jy
! Clean residual min=-0.002211 max=0.003279 Jy/beam
! Clean residual mean=0.000008 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.221176 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 62 components and 0.221176 Jy
! Inverting map 
! Added new window around map position (-4.5, -1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00276725 Jy
! Component: 100  -  total flux cleaned = 0.00423599 Jy
! Component: 150  -  total flux cleaned = 0.00506068 Jy
! Component: 200  -  total flux cleaned = 0.00551977 Jy
! Total flux subtracted in 200 components = 0.00551977 Jy
! Clean residual min=-0.001970 max=0.001776 Jy/beam
! Clean residual mean=0.000007 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.226695 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 84 components and 0.226695 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.481 mas, bmaj=12.11 mas, bpa=-0.4778 degrees
! Estimated noise=0.509778 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00049613 Jy
! Component: 100  -  total flux cleaned = 0.000712019 Jy
! Component: 150  -  total flux cleaned = 0.000732491 Jy
! Component: 200  -  total flux cleaned = 0.000714703 Jy
! Total flux subtracted in 200 components = 0.000714703 Jy
! Clean residual min=-0.002147 max=0.001887 Jy/beam
! Clean residual mean=0.000013 rms=0.000533 Jy/beam
! Combined flux in latest and established models = 0.22741 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.14328e-07 Jy
! Component: 100  -  total flux cleaned = 4.00105e-07 Jy
! Component: 150  -  total flux cleaned = -1.51255e-05 Jy
! Component: 200  -  total flux cleaned = -1.50244e-05 Jy
! Total flux subtracted in 200 components = -1.50244e-05 Jy
! Clean residual min=-0.002116 max=0.001883 Jy/beam
! Clean residual mean=0.000013 rms=0.000530 Jy/beam
! Combined flux in latest and established models = 0.227395 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 110 components and 0.227395 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.316 mas, bmaj=7.881 mas, bpa=-3.874 degrees
! Estimated noise=0.407977 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.50097e-05 Jy
! Component: 100  -  total flux cleaned = 3.86759e-05 Jy
! Component: 150  -  total flux cleaned = 6.09314e-05 Jy
! Component: 200  -  total flux cleaned = 6.09797e-05 Jy
! Total flux subtracted in 200 components = 6.09797e-05 Jy
! Clean residual min=-0.001892 max=0.001794 Jy/beam
! Clean residual mean=0.000006 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.227456 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 124 components and 0.227456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079186Jy  sigma=1.187609
! Fit after  self-cal, rms=0.079181Jy  sigma=1.187439
wmodel J1337+0206_S_map.mod
! Writing 124 model components to file: J1337+0206_S_map.mod
wobs   J1337+0206_S_uvs.fits
! Writing UV FITS file: J1337+0206_S_uvs.fits
wwins  J1337+0206_S_map.win
! wwins: Wrote 3 windows to J1337+0206_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -7.49428e-05 Jy
! Component: 100  -  total flux cleaned = 8.04608e-05 Jy
! Component: 150  -  total flux cleaned = 0.000259009 Jy
! Component: 200  -  total flux cleaned = 0.000429522 Jy
! Component: 250  -  total flux cleaned = 0.000592251 Jy
! Component: 300  -  total flux cleaned = 0.000645059 Jy
! Component: 350  -  total flux cleaned = 0.000696605 Jy
! Component: 400  -  total flux cleaned = 0.000746867 Jy
! Component: 450  -  total flux cleaned = 0.000819689 Jy
! Component: 500  -  total flux cleaned = 0.000867072 Jy
! Component: 550  -  total flux cleaned = 0.00098381 Jy
! Component: 600  -  total flux cleaned = 0.00105218 Jy
! Component: 650  -  total flux cleaned = 0.00107484 Jy
! Component: 700  -  total flux cleaned = 0.00116405 Jy
! Component: 750  -  total flux cleaned = 0.00114287 Jy
! Component: 800  -  total flux cleaned = 0.00118654 Jy
! Component: 850  -  total flux cleaned = 0.00129288 Jy
! Component: 900  -  total flux cleaned = 0.00135538 Jy
! Component: 950  -  total flux cleaned = 0.00131406 Jy
! Component: 1000  -  total flux cleaned = 0.00145661 Jy
! Component: 1050  -  total flux cleaned = 0.001436 Jy
! Component: 1100  -  total flux cleaned = 0.0014959 Jy
! Component: 1150  -  total flux cleaned = 0.00157427 Jy
! Component: 1200  -  total flux cleaned = 0.00159372 Jy
! Component: 1250  -  total flux cleaned = 0.00167079 Jy
! Component: 1300  -  total flux cleaned = 0.00169002 Jy
! Component: 1350  -  total flux cleaned = 0.00184074 Jy
! Component: 1400  -  total flux cleaned = 0.00187783 Jy
! Component: 1450  -  total flux cleaned = 0.00189605 Jy
! Component: 1500  -  total flux cleaned = 0.00196911 Jy
! Component: 1550  -  total flux cleaned = 0.00196929 Jy
! Component: 1600  -  total flux cleaned = 0.00204118 Jy
! Component: 1650  -  total flux cleaned = 0.00211229 Jy
! Component: 1700  -  total flux cleaned = 0.0020773 Jy
! Component: 1750  -  total flux cleaned = 0.00209493 Jy
! Component: 1800  -  total flux cleaned = 0.00212971 Jy
! Component: 1850  -  total flux cleaned = 0.00212959 Jy
! Component: 1900  -  total flux cleaned = 0.00216366 Jy
! Component: 1950  -  total flux cleaned = 0.00221407 Jy
! Component: 2000  -  total flux cleaned = 0.00224754 Jy
! Component: 2050  -  total flux cleaned = 0.00224753 Jy
! Component: 2100  -  total flux cleaned = 0.00228043 Jy
! Component: 2150  -  total flux cleaned = 0.00229711 Jy
! Component: 2200  -  total flux cleaned = 0.00234576 Jy
! Component: 2250  -  total flux cleaned = 0.00236209 Jy
! Component: 2300  -  total flux cleaned = 0.00240994 Jy
! Component: 2350  -  total flux cleaned = 0.00239434 Jy
! Component: 2400  -  total flux cleaned = 0.00245748 Jy
! Component: 2450  -  total flux cleaned = 0.00256644 Jy
! Component: 2500  -  total flux cleaned = 0.00256625 Jy
! Component: 2550  -  total flux cleaned = 0.00261231 Jy
! Component: 2600  -  total flux cleaned = 0.00261226 Jy
! Component: 2650  -  total flux cleaned = 0.00271833 Jy
! Component: 2700  -  total flux cleaned = 0.00273338 Jy
! Component: 2750  -  total flux cleaned = 0.00276332 Jy
! Component: 2800  -  total flux cleaned = 0.0027783 Jy
! Component: 2850  -  total flux cleaned = 0.00277833 Jy
! Component: 2900  -  total flux cleaned = 0.00279303 Jy
! Component: 2950  -  total flux cleaned = 0.00280756 Jy
! Component: 3000  -  total flux cleaned = 0.00287972 Jy
! Component: 3050  -  total flux cleaned = 0.00285107 Jy
! Component: 3100  -  total flux cleaned = 0.00295046 Jy
! Component: 3150  -  total flux cleaned = 0.00290808 Jy
! Component: 3200  -  total flux cleaned = 0.00297822 Jy
! Component: 3250  -  total flux cleaned = 0.00299213 Jy
! Component: 3300  -  total flux cleaned = 0.00300589 Jy
! Component: 3350  -  total flux cleaned = 0.00303346 Jy
! Component: 3400  -  total flux cleaned = 0.00311547 Jy
! Component: 3450  -  total flux cleaned = 0.00314277 Jy
! Component: 3500  -  total flux cleaned = 0.00314274 Jy
! Component: 3550  -  total flux cleaned = 0.00316961 Jy
! Component: 3600  -  total flux cleaned = 0.00320947 Jy
! Component: 3650  -  total flux cleaned = 0.00326243 Jy
! Component: 3700  -  total flux cleaned = 0.00326243 Jy
! Component: 3750  -  total flux cleaned = 0.00327544 Jy
! Component: 3800  -  total flux cleaned = 0.00324944 Jy
! Component: 3850  -  total flux cleaned = 0.0032753 Jy
! Component: 3900  -  total flux cleaned = 0.00324964 Jy
! Component: 3950  -  total flux cleaned = 0.00328813 Jy
! Component: 4000  -  total flux cleaned = 0.00331347 Jy
! Component: 4050  -  total flux cleaned = 0.00333877 Jy
! Total flux subtracted in 4096 components = 0.00333874 Jy
! Clean residual min=-0.000764 max=0.000694 Jy/beam
! Clean residual mean=0.000002 rms=0.000230 Jy/beam
! Combined flux in latest and established models = 0.230795 Jy
keep
! Adding 286 model components to the UV plane model.
! The established model now contains 410 components and 0.230795 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1337+0206_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.316 x 7.881 at -3.874 degrees (North through East)
! Clean map  min=-0.0013669  max=0.15357 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1337+0206_S_map.fits
wmodel /vlbi/uf001/uva//J1337+0206_S_map.mod
! Writing 410 model components to file: /vlbi/uf001/uva//J1337+0206_S_map.mod
wobs   /vlbi/uf001/uva//J1337+0206_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1337+0206_S_uvs.fits
wwins  /vlbi/uf001/uva//J1337+0206_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1337+0206_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.153567 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000230633 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.450551 0.450551 0.901101 1.8022 3.60441 7.20881 14.4176 28.8352 57.6705
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.153 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  665.851 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1337+0206_S_dfm.log closed on Mon Jan 14 02:30:33 2019