! Started logfile: /vlbi/uf001/uva//J1336+0314_S_dfm.log on Mon Jan 14 02:29:40 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1336+0314_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1336+0314_S_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.996491 visibilities/baseline/integration-bin. ! Found source: J1336+0314 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 7668 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1336+0314_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.006102Jy sigma=21.707988 ! Fit after self-cal, rms=0.887874Jy sigma=19.151736 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=7.21 mas, bpa=-4.426 degrees ! Estimated noise=0.490257 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0881288 Jy ! Component: 100 - total flux cleaned = 0.10747 Jy ! Total flux subtracted in 100 components = 0.10747 Jy ! Clean residual min=-0.005468 max=0.009515 Jy/beam ! Clean residual mean=-0.000007 rms=0.001620 Jy/beam ! Combined flux in latest and established models = 0.10747 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.10747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073848Jy sigma=1.439414 ! Fit after self-cal, rms=0.073720Jy sigma=1.437500 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.318 mas, bmaj=7.827 mas, bpa=-4.016 degrees ! Estimated noise=0.387375 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00950068 Jy ! Component: 100 - total flux cleaned = 0.014987 Jy ! Component: 150 - total flux cleaned = 0.018674 Jy ! Component: 200 - total flux cleaned = 0.0203987 Jy ! Total flux subtracted in 200 components = 0.0203987 Jy ! Clean residual min=-0.004495 max=0.007116 Jy/beam ! Clean residual mean=-0.000005 rms=0.001268 Jy/beam ! Combined flux in latest and established models = 0.127869 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 38 components and 0.127869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072467Jy sigma=1.404708 ! Fit after self-cal, rms=0.072383Jy sigma=1.402488 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.318 x 7.827 at -4.016 degrees (North through East) ! Clean map min=-0.004146 max=0.1132 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 HN 0.93 KP 1.02 ! LA 0.94 MK 1.09 NL 1.04 OV 0.96 ! PT 0.97 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 0.93 HN 0.96 KP 0.97 ! LA 0.95 MK 1.05 NL 1.12 OV 0.98 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.96 HN 0.95 KP 0.98 ! LA 0.91 MK 1.04 NL 1.16 OV 0.95 ! PT 0.97 SC 0.99 ! ! ! Fit before self-cal, rms=0.072383Jy sigma=1.402488 ! Fit after self-cal, rms=0.075018Jy sigma=1.383100 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.351 mas, bmaj=7.954 mas, bpa=-3.548 degrees ! Estimated noise=0.385646 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00294641 Jy ! Component: 100 - total flux cleaned = -0.00376345 Jy ! Component: 150 - total flux cleaned = -0.00429953 Jy ! Component: 200 - total flux cleaned = -0.00452831 Jy ! Total flux subtracted in 200 components = -0.00452831 Jy ! Clean residual min=-0.004012 max=0.004736 Jy/beam ! Clean residual mean=-0.000007 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 0.123341 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 59 components and 0.123341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074784Jy sigma=1.379756 ! Fit after self-cal, rms=0.074816Jy sigma=1.379239 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074816Jy sigma=1.379239 ! Fit after self-cal, rms=0.077015Jy sigma=1.329220 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.352 mas, bmaj=7.967 mas, bpa=-3.291 degrees ! Estimated noise=0.38736 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000777971 Jy ! Component: 100 - total flux cleaned = -0.000961755 Jy ! Component: 150 - total flux cleaned = -0.000959364 Jy ! Component: 200 - total flux cleaned = -0.000997427 Jy ! Total flux subtracted in 200 components = -0.000997427 Jy ! Clean residual min=-0.003101 max=0.002151 Jy/beam ! Clean residual mean=-0.000003 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.122343 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 77 components and 0.122343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076926Jy sigma=1.327066 ! Fit after self-cal, rms=0.077054Jy sigma=1.326341 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000275014 Jy ! Component: 100 - total flux cleaned = -0.000273108 Jy ! Component: 150 - total flux cleaned = -0.000273578 Jy ! Component: 200 - total flux cleaned = -0.000332991 Jy ! Total flux subtracted in 200 components = -0.000332991 Jy ! Clean residual min=-0.002952 max=0.002160 Jy/beam ! Clean residual mean=-0.000003 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.12201 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 87 components and 0.12201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077028Jy sigma=1.325614 ! Fit after self-cal, rms=0.077024Jy sigma=1.325584 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077024Jy sigma=1.325584 ! Fit after self-cal, rms=0.078321Jy sigma=1.324651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=7.971 mas, bpa=-3.267 degrees ! Estimated noise=0.386643 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000967146 Jy ! Component: 100 - total flux cleaned = -0.000968333 Jy ! Component: 150 - total flux cleaned = -0.000967354 Jy ! Component: 200 - total flux cleaned = -0.000939946 Jy ! Total flux subtracted in 200 components = -0.000939946 Jy ! Clean residual min=-0.002730 max=0.002104 Jy/beam ! Clean residual mean=-0.000003 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.12107 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 96 components and 0.12107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078286Jy sigma=1.323763 ! Fit after self-cal, rms=0.078298Jy sigma=1.323676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000203366 Jy ! Component: 100 - total flux cleaned = -0.000102776 Jy ! Component: 150 - total flux cleaned = -5.68669e-05 Jy ! Component: 200 - total flux cleaned = -3.55375e-05 Jy ! Total flux subtracted in 200 components = -3.55375e-05 Jy ! Clean residual min=-0.002637 max=0.002122 Jy/beam ! Clean residual mean=-0.000003 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.121035 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 101 components and 0.121035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078285Jy sigma=1.323319 ! Fit after self-cal, rms=0.078283Jy sigma=1.323307 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078283Jy sigma=1.323307 ! Fit after self-cal, rms=0.078810Jy sigma=1.323080 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.632 mas, bmaj=12.26 mas, bpa=-1.596 degrees ! Estimated noise=0.477821 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000467191 Jy ! Component: 100 - total flux cleaned = -0.000505638 Jy ! Component: 150 - total flux cleaned = -0.000507181 Jy ! Component: 200 - total flux cleaned = -0.000483204 Jy ! Total flux subtracted in 200 components = -0.000483204 Jy ! Clean residual min=-0.002367 max=0.002144 Jy/beam ! Clean residual mean=-0.000005 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.120551 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 115 components and 0.120552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078802Jy sigma=1.322860 ! Fit after self-cal, rms=0.078805Jy sigma=1.322818 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.75369e-05 Jy ! Component: 100 - total flux cleaned = 1.91343e-06 Jy ! Component: 150 - total flux cleaned = 2.23889e-05 Jy ! Component: 200 - total flux cleaned = 3.10278e-05 Jy ! Total flux subtracted in 200 components = 3.10278e-05 Jy ! Clean residual min=-0.002345 max=0.002156 Jy/beam ! Clean residual mean=-0.000004 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.120583 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 122 components and 0.120583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078803Jy sigma=1.322772 ! Fit after self-cal, rms=0.078802Jy sigma=1.322761 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.348 mas, bmaj=7.975 mas, bpa=-3.264 degrees ! Estimated noise=0.386082 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.348 x 7.975 at -3.264 degrees (North through East) ! Clean map min=-0.0023567 max=0.11354 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.85 mas, bmaj=7.265 mas, bpa=-3.651 degrees ! Estimated noise=0.499496 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0897895 Jy ! Component: 100 - total flux cleaned = 0.109429 Jy ! Component: 150 - total flux cleaned = 0.114304 Jy ! Component: 200 - total flux cleaned = 0.116716 Jy ! Total flux subtracted in 200 components = 0.116716 Jy ! Clean residual min=-0.003139 max=0.002814 Jy/beam ! Clean residual mean=-0.000002 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.116716 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.116716 Jy ! Inverting map and beam ! Estimated beam: bmin=3.348 mas, bmaj=7.975 mas, bpa=-3.264 degrees ! Estimated noise=0.386082 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015819 Jy ! Component: 100 - total flux cleaned = 0.00210685 Jy ! Component: 150 - total flux cleaned = 0.00238857 Jy ! Component: 200 - total flux cleaned = 0.00262607 Jy ! Total flux subtracted in 200 components = 0.00262607 Jy ! Clean residual min=-0.002408 max=0.002030 Jy/beam ! Clean residual mean=-0.000002 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.119342 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 51 components and 0.119342 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.632 mas, bmaj=12.26 mas, bpa=-1.596 degrees ! Estimated noise=0.477821 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000678935 Jy ! Component: 100 - total flux cleaned = 0.000802121 Jy ! Component: 150 - total flux cleaned = 0.000891 Jy ! Component: 200 - total flux cleaned = 0.000933931 Jy ! Total flux subtracted in 200 components = 0.000933931 Jy ! Clean residual min=-0.002319 max=0.002158 Jy/beam ! Clean residual mean=-0.000005 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.120276 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.35382e-05 Jy ! Component: 100 - total flux cleaned = 3.83483e-05 Jy ! Component: 150 - total flux cleaned = 5.24114e-05 Jy ! Component: 200 - total flux cleaned = 6.59489e-05 Jy ! Total flux subtracted in 200 components = 6.59489e-05 Jy ! Clean residual min=-0.002316 max=0.002164 Jy/beam ! Clean residual mean=-0.000004 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.120342 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 69 components and 0.120342 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.348 mas, bmaj=7.975 mas, bpa=-3.264 degrees ! Estimated noise=0.386082 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000194489 Jy ! Component: 100 - total flux cleaned = -0.000195329 Jy ! Component: 150 - total flux cleaned = -0.000195372 Jy ! Component: 200 - total flux cleaned = -0.000180051 Jy ! Total flux subtracted in 200 components = -0.000180051 Jy ! Clean residual min=-0.002341 max=0.002043 Jy/beam ! Clean residual mean=-0.000002 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.120162 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 86 components and 0.120162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078800Jy sigma=1.322669 ! Fit after self-cal, rms=0.078795Jy sigma=1.322573 wmodel J1336+0314_S_map.mod ! Writing 86 model components to file: J1336+0314_S_map.mod wobs J1336+0314_S_uvs.fits ! Writing UV FITS file: J1336+0314_S_uvs.fits wwins J1336+0314_S_map.win ! wwins: Wrote 2 windows to J1336+0314_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000190278 Jy ! Component: 100 - total flux cleaned = 0.000160453 Jy ! Component: 150 - total flux cleaned = 0.00062367 Jy ! Component: 200 - total flux cleaned = 0.000877332 Jy ! Component: 250 - total flux cleaned = 0.00109142 Jy ! Component: 300 - total flux cleaned = 0.00123882 Jy ! Component: 350 - total flux cleaned = 0.00129642 Jy ! Component: 400 - total flux cleaned = 0.00140844 Jy ! Component: 450 - total flux cleaned = 0.00143595 Jy ! Component: 500 - total flux cleaned = 0.00143671 Jy ! Component: 550 - total flux cleaned = 0.00154158 Jy ! Component: 600 - total flux cleaned = 0.0015662 Jy ! Component: 650 - total flux cleaned = 0.00151515 Jy ! Component: 700 - total flux cleaned = 0.00146505 Jy ! Component: 750 - total flux cleaned = 0.00141621 Jy ! Component: 800 - total flux cleaned = 0.00132088 Jy ! Component: 850 - total flux cleaned = 0.00136803 Jy ! Component: 900 - total flux cleaned = 0.00136746 Jy ! Component: 950 - total flux cleaned = 0.00127598 Jy ! Component: 1000 - total flux cleaned = 0.00132111 Jy ! Component: 1050 - total flux cleaned = 0.00134411 Jy ! Component: 1100 - total flux cleaned = 0.00138832 Jy ! Component: 1150 - total flux cleaned = 0.00147563 Jy ! Component: 1200 - total flux cleaned = 0.00154009 Jy ! Component: 1250 - total flux cleaned = 0.00153993 Jy ! Component: 1300 - total flux cleaned = 0.00158209 Jy ! Component: 1350 - total flux cleaned = 0.0016028 Jy ! Component: 1400 - total flux cleaned = 0.00156186 Jy ! Component: 1450 - total flux cleaned = 0.00158224 Jy ! Component: 1500 - total flux cleaned = 0.00160246 Jy ! Component: 1550 - total flux cleaned = 0.00166222 Jy ! Component: 1600 - total flux cleaned = 0.00170139 Jy ! Component: 1650 - total flux cleaned = 0.00174035 Jy ! Component: 1700 - total flux cleaned = 0.00175949 Jy ! Component: 1750 - total flux cleaned = 0.00177839 Jy ! Component: 1800 - total flux cleaned = 0.00179728 Jy ! Component: 1850 - total flux cleaned = 0.00181565 Jy ! Component: 1900 - total flux cleaned = 0.00179703 Jy ! Component: 1950 - total flux cleaned = 0.00183386 Jy ! Component: 2000 - total flux cleaned = 0.0018155 Jy ! Component: 2050 - total flux cleaned = 0.00183364 Jy ! Component: 2100 - total flux cleaned = 0.00185146 Jy ! Component: 2150 - total flux cleaned = 0.00183348 Jy ! Component: 2200 - total flux cleaned = 0.00178044 Jy ! Component: 2250 - total flux cleaned = 0.00183342 Jy ! Component: 2300 - total flux cleaned = 0.00178146 Jy ! Component: 2350 - total flux cleaned = 0.00179886 Jy ! Component: 2400 - total flux cleaned = 0.00186732 Jy ! Component: 2450 - total flux cleaned = 0.00185049 Jy ! Component: 2500 - total flux cleaned = 0.00193502 Jy ! Component: 2550 - total flux cleaned = 0.00191813 Jy ! Component: 2600 - total flux cleaned = 0.00186828 Jy ! Component: 2650 - total flux cleaned = 0.00198405 Jy ! Component: 2700 - total flux cleaned = 0.00196761 Jy ! Component: 2750 - total flux cleaned = 0.00198408 Jy ! Component: 2800 - total flux cleaned = 0.00198385 Jy ! Component: 2850 - total flux cleaned = 0.00200001 Jy ! Component: 2900 - total flux cleaned = 0.00196798 Jy ! Component: 2950 - total flux cleaned = 0.00203145 Jy ! Component: 3000 - total flux cleaned = 0.00201559 Jy ! Component: 3050 - total flux cleaned = 0.00204677 Jy ! Component: 3100 - total flux cleaned = 0.00201555 Jy ! Component: 3150 - total flux cleaned = 0.00207746 Jy ! Component: 3200 - total flux cleaned = 0.00204673 Jy ! Component: 3250 - total flux cleaned = 0.00207747 Jy ! Component: 3300 - total flux cleaned = 0.00207739 Jy ! Component: 3350 - total flux cleaned = 0.00209269 Jy ! Component: 3400 - total flux cleaned = 0.0020776 Jy ! Component: 3450 - total flux cleaned = 0.00207768 Jy ! Component: 3500 - total flux cleaned = 0.0020627 Jy ! Component: 3550 - total flux cleaned = 0.00204777 Jy ! Component: 3600 - total flux cleaned = 0.00210653 Jy ! Component: 3650 - total flux cleaned = 0.00207729 Jy ! Component: 3700 - total flux cleaned = 0.00210638 Jy ! Component: 3750 - total flux cleaned = 0.0021641 Jy ! Component: 3800 - total flux cleaned = 0.00214979 Jy ! Component: 3850 - total flux cleaned = 0.00213548 Jy ! Component: 3900 - total flux cleaned = 0.00216395 Jy ! Component: 3950 - total flux cleaned = 0.00212165 Jy ! Component: 4000 - total flux cleaned = 0.00210777 Jy ! Component: 4050 - total flux cleaned = 0.00216364 Jy ! Total flux subtracted in 4096 components = 0.00219138 Jy ! Clean residual min=-0.000803 max=0.000794 Jy/beam ! Clean residual mean=-0.000002 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.122353 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 365 components and 0.122353 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1336+0314_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.348 x 7.975 at -3.264 degrees (North through East) ! Clean map min=-0.0019092 max=0.11447 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1336+0314_S_map.fits wmodel /vlbi/uf001/uva//J1336+0314_S_map.mod ! Writing 365 model components to file: /vlbi/uf001/uva//J1336+0314_S_map.mod wobs /vlbi/uf001/uva//J1336+0314_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1336+0314_S_uvs.fits wwins /vlbi/uf001/uva//J1336+0314_S_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uva//J1336+0314_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.114475 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0002559 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.670627 0.670627 1.34125 2.68251 5.36502 10.73 21.4601 42.9201 85.8402 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.114 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 447.342 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1336+0314_S_dfm.log closed on Mon Jan 14 02:29:45 2019