! Started logfile: /vlbi/uf001/uva//J1333-2356_S_dfm.log on Mon Jan 14 02:28:38 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1333-2356_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1333-2356_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.573879 visibilities/baseline/integration-bin.
! Found source: J1333-2356
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4416 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1333-2356_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 154 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 154 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 154 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010587Jy  sigma=17.073251
! Fit after  self-cal, rms=0.891380Jy  sigma=15.082973
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.82 mas, bmaj=6.53 mas, bpa=-1.905 degrees
! Estimated noise=0.808232 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0849927 Jy
! Component: 100  -  total flux cleaned = 0.10663 Jy
! Total flux subtracted in 100 components = 0.10663 Jy
! Clean residual min=-0.005305 max=0.008487 Jy/beam
! Clean residual mean=0.000031 rms=0.001494 Jy/beam
! Combined flux in latest and established models = 0.10663 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.10663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088741Jy  sigma=1.310464
! Fit after  self-cal, rms=0.088711Jy  sigma=1.310017
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.363 mas, bmaj=7.564 mas, bpa=0.3 degrees
! Estimated noise=0.654286 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0127191 Jy
! Component: 100  -  total flux cleaned = 0.0198036 Jy
! Component: 150  -  total flux cleaned = 0.0239755 Jy
! Component: 200  -  total flux cleaned = 0.0264533 Jy
! Total flux subtracted in 200 components = 0.0264533 Jy
! Clean residual min=-0.004696 max=0.005322 Jy/beam
! Clean residual mean=0.000000 rms=0.001218 Jy/beam
! Combined flux in latest and established models = 0.133083 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 37 components and 0.133083 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087024Jy  sigma=1.271892
! Fit after  self-cal, rms=0.087030Jy  sigma=1.271274
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.363 x 7.564 at 0.3 degrees (North through East)
! Clean map  min=-0.0044805  max=0.10718 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.91     HN        1.09     KP        1.03     
!   LA        0.96     MK        1.05     NL        1.05     OV        1.04     
!   PT        0.90     SC        1.03     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        1.10     KP        1.02     
!   LA        0.97     MK        1.04     NL        1.14     OV        1.02     
!   PT        0.94     SC        0.94     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.93     HN        1.12     KP        1.03     
!   LA        0.98     MK        0.97     NL        1.00     OV        1.01     
!   PT        0.94     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.087030Jy  sigma=1.271274
! Fit after  self-cal, rms=0.088548Jy  sigma=1.260877
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.385 mas, bmaj=7.613 mas, bpa=0.7885 degrees
! Estimated noise=0.656548 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000586134 Jy
! Component: 100  -  total flux cleaned = -0.00062649 Jy
! Component: 150  -  total flux cleaned = -0.000626155 Jy
! Component: 200  -  total flux cleaned = -0.000627424 Jy
! Total flux subtracted in 200 components = -0.000627424 Jy
! Clean residual min=-0.003974 max=0.003808 Jy/beam
! Clean residual mean=0.000001 rms=0.000989 Jy/beam
! Combined flux in latest and established models = 0.132456 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 44 components and 0.132456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088510Jy  sigma=1.260309
! Fit after  self-cal, rms=0.088639Jy  sigma=1.260004
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088639Jy  sigma=1.260004
! Fit after  self-cal, rms=0.092417Jy  sigma=1.254005
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.382 mas, bmaj=7.624 mas, bpa=0.756 degrees
! Estimated noise=0.657818 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000402358 Jy
! Component: 100  -  total flux cleaned = 0.000457853 Jy
! Component: 150  -  total flux cleaned = 0.00043293 Jy
! Component: 200  -  total flux cleaned = 0.000388015 Jy
! Total flux subtracted in 200 components = 0.000388015 Jy
! Clean residual min=-0.003278 max=0.003487 Jy/beam
! Clean residual mean=0.000003 rms=0.000864 Jy/beam
! Combined flux in latest and established models = 0.132844 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 48 components and 0.132844 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092402Jy  sigma=1.253747
! Fit after  self-cal, rms=0.092537Jy  sigma=1.253626
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.66847e-05 Jy
! Component: 100  -  total flux cleaned = -6.69255e-05 Jy
! Component: 150  -  total flux cleaned = -8.53139e-05 Jy
! Component: 200  -  total flux cleaned = -0.000102641 Jy
! Total flux subtracted in 200 components = -0.000102641 Jy
! Clean residual min=-0.003288 max=0.003523 Jy/beam
! Clean residual mean=0.000003 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 0.132741 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 51 components and 0.132741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092527Jy  sigma=1.253483
! Fit after  self-cal, rms=0.092529Jy  sigma=1.253467
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092529Jy  sigma=1.253467
! Fit after  self-cal, rms=0.095291Jy  sigma=1.252833
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.382 mas, bmaj=7.634 mas, bpa=0.5488 degrees
! Estimated noise=0.660065 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000276735 Jy
! Component: 100  -  total flux cleaned = 0.000253588 Jy
! Component: 150  -  total flux cleaned = 0.000254547 Jy
! Component: 200  -  total flux cleaned = 0.000221196 Jy
! Total flux subtracted in 200 components = 0.000221196 Jy
! Clean residual min=-0.003299 max=0.003351 Jy/beam
! Clean residual mean=0.000004 rms=0.000850 Jy/beam
! Combined flux in latest and established models = 0.132962 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 58 components and 0.132962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095277Jy  sigma=1.252737
! Fit after  self-cal, rms=0.095331Jy  sigma=1.252707
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.19199e-06 Jy
! Component: 100  -  total flux cleaned = -2.9213e-05 Jy
! Component: 150  -  total flux cleaned = -5.7936e-05 Jy
! Component: 200  -  total flux cleaned = -7.16392e-05 Jy
! Total flux subtracted in 200 components = -7.16392e-05 Jy
! Clean residual min=-0.003278 max=0.003403 Jy/beam
! Clean residual mean=0.000004 rms=0.000847 Jy/beam
! Combined flux in latest and established models = 0.132891 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 60 components and 0.132891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095325Jy  sigma=1.252638
! Fit after  self-cal, rms=0.095328Jy  sigma=1.252631
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095328Jy  sigma=1.252631
! Fit after  self-cal, rms=0.095678Jy  sigma=1.252491
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.326 mas, bmaj=16.17 mas, bpa=1.833 degrees
! Estimated noise=0.82035 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000471329 Jy
! Component: 100  -  total flux cleaned = 0.000464921 Jy
! Component: 150  -  total flux cleaned = 0.000463097 Jy
! Component: 200  -  total flux cleaned = 0.000508352 Jy
! Total flux subtracted in 200 components = 0.000508352 Jy
! Clean residual min=-0.003578 max=0.004417 Jy/beam
! Clean residual mean=0.000006 rms=0.001121 Jy/beam
! Combined flux in latest and established models = 0.133399 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 60 components and 0.133399 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095682Jy  sigma=1.252609
! Fit after  self-cal, rms=0.095661Jy  sigma=1.252447
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.12892e-05 Jy
! Component: 100  -  total flux cleaned = 7.90274e-05 Jy
! Component: 150  -  total flux cleaned = 7.82797e-05 Jy
! Component: 200  -  total flux cleaned = 7.84295e-05 Jy
! Total flux subtracted in 200 components = 7.84295e-05 Jy
! Clean residual min=-0.003574 max=0.004405 Jy/beam
! Clean residual mean=0.000006 rms=0.001113 Jy/beam
! Combined flux in latest and established models = 0.133478 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 61 components and 0.133478 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095671Jy  sigma=1.252672
! Fit after  self-cal, rms=0.095658Jy  sigma=1.252581
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.385 mas, bmaj=7.637 mas, bpa=0.3649 degrees
! Estimated noise=0.662252 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.385 x 7.637 at 0.3649 degrees (North through East)
! Clean map  min=-0.0029856  max=0.10912 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.825 mas, bmaj=6.556 mas, bpa=-1.983 degrees
! Estimated noise=0.822215 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0862309 Jy
! Component: 100  -  total flux cleaned = 0.108655 Jy
! Component: 150  -  total flux cleaned = 0.117998 Jy
! Component: 200  -  total flux cleaned = 0.123666 Jy
! Total flux subtracted in 200 components = 0.123666 Jy
! Clean residual min=-0.004030 max=0.004410 Jy/beam
! Clean residual mean=0.000013 rms=0.001022 Jy/beam
! Combined flux in latest and established models = 0.123666 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.123666 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.385 mas, bmaj=7.637 mas, bpa=0.3649 degrees
! Estimated noise=0.662252 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, 4.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00514716 Jy
! Component: 100  -  total flux cleaned = 0.0078826 Jy
! Component: 150  -  total flux cleaned = 0.00941094 Jy
! Component: 200  -  total flux cleaned = 0.00981084 Jy
! Total flux subtracted in 200 components = 0.00981084 Jy
! Clean residual min=-0.003225 max=0.003468 Jy/beam
! Clean residual mean=0.000006 rms=0.000821 Jy/beam
! Combined flux in latest and established models = 0.133477 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 41 components and 0.133477 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.326 mas, bmaj=16.17 mas, bpa=1.833 degrees
! Estimated noise=0.82035 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00136054 Jy
! Component: 100  -  total flux cleaned = 0.00159442 Jy
! Component: 150  -  total flux cleaned = 0.00173323 Jy
! Component: 200  -  total flux cleaned = 0.00170932 Jy
! Total flux subtracted in 200 components = 0.00170932 Jy
! Clean residual min=-0.003485 max=0.004040 Jy/beam
! Clean residual mean=0.000009 rms=0.001041 Jy/beam
! Combined flux in latest and established models = 0.135186 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.02388e-05 Jy
! Component: 100  -  total flux cleaned = 9.24907e-05 Jy
! Component: 150  -  total flux cleaned = 0.000123614 Jy
! Component: 200  -  total flux cleaned = 0.00015283 Jy
! Total flux subtracted in 200 components = 0.00015283 Jy
! Clean residual min=-0.003485 max=0.004031 Jy/beam
! Clean residual mean=0.000009 rms=0.001038 Jy/beam
! Combined flux in latest and established models = 0.135339 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 57 components and 0.135339 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.385 mas, bmaj=7.637 mas, bpa=0.3649 degrees
! Estimated noise=0.662252 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000724107 Jy
! Component: 100  -  total flux cleaned = -0.000681825 Jy
! Component: 150  -  total flux cleaned = -0.000576629 Jy
! Component: 200  -  total flux cleaned = -0.000483337 Jy
! Total flux subtracted in 200 components = -0.000483337 Jy
! Clean residual min=-0.002998 max=0.003399 Jy/beam
! Clean residual mean=0.000005 rms=0.000798 Jy/beam
! Combined flux in latest and established models = 0.134856 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 69 components and 0.134856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095578Jy  sigma=1.250896
! Fit after  self-cal, rms=0.095575Jy  sigma=1.250578
wmodel J1333-2356_S_map.mod
! Writing 69 model components to file: J1333-2356_S_map.mod
wobs   J1333-2356_S_uvs.fits
! Writing UV FITS file: J1333-2356_S_uvs.fits
wwins  J1333-2356_S_map.win
! wwins: Wrote 2 windows to J1333-2356_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000468007 Jy
! Component: 100  -  total flux cleaned = 0.000311741 Jy
! Component: 150  -  total flux cleaned = 0.000311349 Jy
! Component: 200  -  total flux cleaned = 0.000499653 Jy
! Component: 250  -  total flux cleaned = 0.000590689 Jy
! Component: 300  -  total flux cleaned = 0.00076795 Jy
! Component: 350  -  total flux cleaned = 0.00076791 Jy
! Component: 400  -  total flux cleaned = 0.000892671 Jy
! Component: 450  -  total flux cleaned = 0.00105444 Jy
! Component: 500  -  total flux cleaned = 0.00113393 Jy
! Component: 550  -  total flux cleaned = 0.00136628 Jy
! Component: 600  -  total flux cleaned = 0.00151684 Jy
! Component: 650  -  total flux cleaned = 0.00159005 Jy
! Component: 700  -  total flux cleaned = 0.00166223 Jy
! Component: 750  -  total flux cleaned = 0.00183852 Jy
! Component: 800  -  total flux cleaned = 0.00194173 Jy
! Component: 850  -  total flux cleaned = 0.00197619 Jy
! Component: 900  -  total flux cleaned = 0.00207607 Jy
! Component: 950  -  total flux cleaned = 0.00210889 Jy
! Component: 1000  -  total flux cleaned = 0.00207769 Jy
! Component: 1050  -  total flux cleaned = 0.00217292 Jy
! Component: 1100  -  total flux cleaned = 0.00226515 Jy
! Component: 1150  -  total flux cleaned = 0.00229544 Jy
! Component: 1200  -  total flux cleaned = 0.00241447 Jy
! Component: 1250  -  total flux cleaned = 0.00250211 Jy
! Component: 1300  -  total flux cleaned = 0.00264587 Jy
! Component: 1350  -  total flux cleaned = 0.00267491 Jy
! Component: 1400  -  total flux cleaned = 0.00275942 Jy
! Component: 1450  -  total flux cleaned = 0.00289781 Jy
! Component: 1500  -  total flux cleaned = 0.00300653 Jy
! Component: 1550  -  total flux cleaned = 0.00311373 Jy
! Component: 1600  -  total flux cleaned = 0.00313974 Jy
! Component: 1650  -  total flux cleaned = 0.00324403 Jy
! Component: 1700  -  total flux cleaned = 0.00329558 Jy
! Component: 1750  -  total flux cleaned = 0.00332131 Jy
! Component: 1800  -  total flux cleaned = 0.00339674 Jy
! Component: 1850  -  total flux cleaned = 0.00342175 Jy
! Component: 1900  -  total flux cleaned = 0.00347042 Jy
! Component: 1950  -  total flux cleaned = 0.00349485 Jy
! Component: 2000  -  total flux cleaned = 0.00356739 Jy
! Component: 2050  -  total flux cleaned = 0.00366215 Jy
! Component: 2100  -  total flux cleaned = 0.00363875 Jy
! Component: 2150  -  total flux cleaned = 0.00370851 Jy
! Component: 2200  -  total flux cleaned = 0.00382314 Jy
! Component: 2250  -  total flux cleaned = 0.00380021 Jy
! Component: 2300  -  total flux cleaned = 0.0039123 Jy
! Component: 2350  -  total flux cleaned = 0.00386747 Jy
! Component: 2400  -  total flux cleaned = 0.00386762 Jy
! Component: 2450  -  total flux cleaned = 0.0038895 Jy
! Component: 2500  -  total flux cleaned = 0.00395382 Jy
! Component: 2550  -  total flux cleaned = 0.00399646 Jy
! Component: 2600  -  total flux cleaned = 0.00403858 Jy
! Component: 2650  -  total flux cleaned = 0.00405917 Jy
! Component: 2700  -  total flux cleaned = 0.00405903 Jy
! Component: 2750  -  total flux cleaned = 0.00409989 Jy
! Component: 2800  -  total flux cleaned = 0.00407988 Jy
! Component: 2850  -  total flux cleaned = 0.00414008 Jy
! Component: 2900  -  total flux cleaned = 0.00410002 Jy
! Component: 2950  -  total flux cleaned = 0.00415921 Jy
! Component: 3000  -  total flux cleaned = 0.00417873 Jy
! Component: 3050  -  total flux cleaned = 0.00417856 Jy
! Component: 3100  -  total flux cleaned = 0.00419784 Jy
! Component: 3150  -  total flux cleaned = 0.00425539 Jy
! Component: 3200  -  total flux cleaned = 0.00431205 Jy
! Component: 3250  -  total flux cleaned = 0.00434967 Jy
! Component: 3300  -  total flux cleaned = 0.00438697 Jy
! Component: 3350  -  total flux cleaned = 0.00444243 Jy
! Component: 3400  -  total flux cleaned = 0.00447935 Jy
! Component: 3450  -  total flux cleaned = 0.00457036 Jy
! Component: 3500  -  total flux cleaned = 0.00457053 Jy
! Component: 3550  -  total flux cleaned = 0.00473241 Jy
! Component: 3600  -  total flux cleaned = 0.00478607 Jy
! Component: 3650  -  total flux cleaned = 0.0049104 Jy
! Component: 3700  -  total flux cleaned = 0.00503351 Jy
! Component: 3750  -  total flux cleaned = 0.00515584 Jy
! Component: 3800  -  total flux cleaned = 0.00520782 Jy
! Component: 3850  -  total flux cleaned = 0.00532898 Jy
! Component: 3900  -  total flux cleaned = 0.00544918 Jy
! Component: 3950  -  total flux cleaned = 0.00550039 Jy
! Component: 4000  -  total flux cleaned = 0.00561936 Jy
! Component: 4050  -  total flux cleaned = 0.0056531 Jy
! Total flux subtracted in 4096 components = 0.0057204 Jy
! Clean residual min=-0.001318 max=0.001277 Jy/beam
! Clean residual mean=0.000006 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.140576 Jy
keep
! Adding 292 model components to the UV plane model.
! The established model now contains 361 components and 0.140576 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1333-2356_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.385 x 7.637 at 0.3649 degrees (North through East)
! Clean map  min=-0.0024087  max=0.11026 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1333-2356_S_map.fits
wmodel /vlbi/uf001/uva//J1333-2356_S_map.mod
! Writing 361 model components to file: /vlbi/uf001/uva//J1333-2356_S_map.mod
wobs   /vlbi/uf001/uva//J1333-2356_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1333-2356_S_uvs.fits
wwins  /vlbi/uf001/uva//J1333-2356_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J1333-2356_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.110263 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000300224 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.816843 0.816843 1.63369 3.26737 6.53475 13.0695 26.139 52.278
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.11 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  367.267 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1333-2356_S_dfm.log closed on Mon Jan 14 02:28:42 2019