! Started logfile: /vlbi/uf001/uva//J1333+2725_S_dfm.log on Mon Jan 14 02:28:02 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1333+2725_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1333+2725_S_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.839153 visibilities/baseline/integration-bin.
! Found source: J1333+2725
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4758 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1333+2725_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.018854Jy  sigma=21.932788
! Fit after  self-cal, rms=0.809403Jy  sigma=17.441796
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.108 mas, bmaj=6.39 mas, bpa=7.13 degrees
! Estimated noise=0.698821 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.144733 Jy
! Component: 100  -  total flux cleaned = 0.181154 Jy
! Total flux subtracted in 100 components = 0.181154 Jy
! Clean residual min=-0.006461 max=0.015118 Jy/beam
! Clean residual mean=0.000005 rms=0.001918 Jy/beam
! Combined flux in latest and established models = 0.181154 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.181154 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068479Jy  sigma=1.395838
! Fit after  self-cal, rms=0.068433Jy  sigma=1.395007
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0164683 Jy
! Component: 100  -  total flux cleaned = 0.02445 Jy
! Total flux subtracted in 100 components = 0.02445 Jy
! Clean residual min=-0.005189 max=0.009583 Jy/beam
! Clean residual mean=0.000004 rms=0.001449 Jy/beam
! Combined flux in latest and established models = 0.205604 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 13 components and 0.205604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063785Jy  sigma=1.304238
! Fit after  self-cal, rms=0.063718Jy  sigma=1.302903
! Inverting map 
! Added new window around map position (6, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00849033 Jy
! Component: 100  -  total flux cleaned = 0.0129944 Jy
! Total flux subtracted in 100 components = 0.0129944 Jy
! Clean residual min=-0.004952 max=0.007332 Jy/beam
! Clean residual mean=0.000003 rms=0.001302 Jy/beam
! Combined flux in latest and established models = 0.218598 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 33 components and 0.218598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062309Jy  sigma=1.269275
! Fit after  self-cal, rms=0.062217Jy  sigma=1.266569
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.706 mas, bmaj=7.391 mas, bpa=6.066 degrees
! Estimated noise=0.528607 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00524074 Jy
! Component: 100  -  total flux cleaned = 0.0083147 Jy
! Component: 150  -  total flux cleaned = 0.0104412 Jy
! Component: 200  -  total flux cleaned = 0.0114493 Jy
! Total flux subtracted in 200 components = 0.0114493 Jy
! Clean residual min=-0.004433 max=0.006116 Jy/beam
! Clean residual mean=0.000006 rms=0.001149 Jy/beam
! Combined flux in latest and established models = 0.230048 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 53 components and 0.230048 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061770Jy  sigma=1.254004
! Fit after  self-cal, rms=0.061755Jy  sigma=1.253196
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.706 x 7.391 at 6.066 degrees (North through East)
! Clean map  min=-0.0042128  max=0.18794 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        0.98     KP        0.98     
!   LA        0.94     MK        0.96     NL        1.02     OV        0.97     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        0.97     KP        0.99     
!   LA        0.94     MK        1.03     NL        1.10     OV        1.03     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        0.97     KP        1.00     
!   LA        0.95     MK        1.04     NL        1.22     OV        0.98     
!   PT        0.99     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.061755Jy  sigma=1.253196
! Fit after  self-cal, rms=0.060483Jy  sigma=1.213438
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.71 mas, bmaj=7.403 mas, bpa=6.174 degrees
! Estimated noise=0.529178 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00259465 Jy
! Component: 100  -  total flux cleaned = -0.00366029 Jy
! Component: 150  -  total flux cleaned = -0.00407538 Jy
! Component: 200  -  total flux cleaned = -0.00432988 Jy
! Total flux subtracted in 200 components = -0.00432988 Jy
! Clean residual min=-0.003053 max=0.003726 Jy/beam
! Clean residual mean=0.000003 rms=0.000851 Jy/beam
! Combined flux in latest and established models = 0.225718 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 69 components and 0.225718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060340Jy  sigma=1.211017
! Fit after  self-cal, rms=0.060314Jy  sigma=1.210573
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060314Jy  sigma=1.210573
! Fit after  self-cal, rms=0.058727Jy  sigma=1.174179
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.716 mas, bmaj=7.41 mas, bpa=6.351 degrees
! Estimated noise=0.528927 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00245869 Jy
! Component: 100  -  total flux cleaned = -0.00289727 Jy
! Component: 150  -  total flux cleaned = -0.00298697 Jy
! Component: 200  -  total flux cleaned = -0.00301036 Jy
! Total flux subtracted in 200 components = -0.00301036 Jy
! Clean residual min=-0.002543 max=0.002371 Jy/beam
! Clean residual mean=0.000002 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.222708 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 81 components and 0.222708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058621Jy  sigma=1.172043
! Fit after  self-cal, rms=0.058619Jy  sigma=1.171629
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000335601 Jy
! Component: 100  -  total flux cleaned = -0.000374555 Jy
! Component: 150  -  total flux cleaned = -0.000443903 Jy
! Component: 200  -  total flux cleaned = -0.000505149 Jy
! Total flux subtracted in 200 components = -0.000505149 Jy
! Clean residual min=-0.002539 max=0.002398 Jy/beam
! Clean residual mean=0.000002 rms=0.000561 Jy/beam
! Combined flux in latest and established models = 0.222203 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 91 components and 0.222202 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058605Jy  sigma=1.171354
! Fit after  self-cal, rms=0.058602Jy  sigma=1.171331
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058602Jy  sigma=1.171331
! Fit after  self-cal, rms=0.058690Jy  sigma=1.170589
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.712 mas, bmaj=7.418 mas, bpa=6.338 degrees
! Estimated noise=0.528618 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00106824 Jy
! Component: 100  -  total flux cleaned = -0.00128271 Jy
! Component: 150  -  total flux cleaned = -0.00138175 Jy
! Component: 200  -  total flux cleaned = -0.001399 Jy
! Total flux subtracted in 200 components = -0.001399 Jy
! Clean residual min=-0.002533 max=0.002282 Jy/beam
! Clean residual mean=0.000001 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.220803 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 96 components and 0.220803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058666Jy  sigma=1.170098
! Fit after  self-cal, rms=0.058665Jy  sigma=1.170047
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000147702 Jy
! Component: 100  -  total flux cleaned = -0.000178427 Jy
! Component: 150  -  total flux cleaned = -0.000192413 Jy
! Component: 200  -  total flux cleaned = -0.000205823 Jy
! Total flux subtracted in 200 components = -0.000205823 Jy
! Clean residual min=-0.002532 max=0.002318 Jy/beam
! Clean residual mean=0.000001 rms=0.000538 Jy/beam
! Combined flux in latest and established models = 0.220598 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 99 components and 0.220598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058657Jy  sigma=1.169900
! Fit after  self-cal, rms=0.058657Jy  sigma=1.169895
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058657Jy  sigma=1.169895
! Fit after  self-cal, rms=0.058693Jy  sigma=1.169750
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.511 mas, bmaj=10.1 mas, bpa=2.389 degrees
! Estimated noise=0.632699 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000656306 Jy
! Component: 100  -  total flux cleaned = -0.000886259 Jy
! Component: 150  -  total flux cleaned = -0.000917862 Jy
! Component: 200  -  total flux cleaned = -0.000945566 Jy
! Total flux subtracted in 200 components = -0.000945566 Jy
! Clean residual min=-0.002308 max=0.002509 Jy/beam
! Clean residual mean=0.000002 rms=0.000650 Jy/beam
! Combined flux in latest and established models = 0.219652 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 104 components and 0.219652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058688Jy  sigma=1.169664
! Fit after  self-cal, rms=0.058688Jy  sigma=1.169650
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.58266e-05 Jy
! Component: 100  -  total flux cleaned = -6.95289e-05 Jy
! Component: 150  -  total flux cleaned = -7.70862e-05 Jy
! Component: 200  -  total flux cleaned = -7.72366e-05 Jy
! Total flux subtracted in 200 components = -7.72366e-05 Jy
! Clean residual min=-0.002305 max=0.002499 Jy/beam
! Clean residual mean=0.000002 rms=0.000648 Jy/beam
! Combined flux in latest and established models = 0.219575 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 108 components and 0.219575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058688Jy  sigma=1.169661
! Fit after  self-cal, rms=0.058688Jy  sigma=1.169656
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.71 mas, bmaj=7.423 mas, bpa=6.321 degrees
! Estimated noise=0.528323 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.71 x 7.423 at 6.321 degrees (North through East)
! Clean map  min=-0.0024791  max=0.18845 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.113 mas, bmaj=6.42 mas, bpa=7.209 degrees
! Estimated noise=0.698579 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.14454 Jy
! Component: 100  -  total flux cleaned = 0.1818 Jy
! Component: 150  -  total flux cleaned = 0.198586 Jy
! Component: 200  -  total flux cleaned = 0.207482 Jy
! Total flux subtracted in 200 components = 0.207482 Jy
! Clean residual min=-0.003450 max=0.004342 Jy/beam
! Clean residual mean=0.000001 rms=0.000928 Jy/beam
! Combined flux in latest and established models = 0.207482 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.207482 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.71 mas, bmaj=7.423 mas, bpa=6.321 degrees
! Estimated noise=0.528323 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00578174 Jy
! Component: 100  -  total flux cleaned = 0.00893861 Jy
! Component: 150  -  total flux cleaned = 0.0102841 Jy
! Component: 200  -  total flux cleaned = 0.0107312 Jy
! Total flux subtracted in 200 components = 0.0107312 Jy
! Clean residual min=-0.002609 max=0.002300 Jy/beam
! Clean residual mean=0.000001 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.218213 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 38 components and 0.218213 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.511 mas, bmaj=10.1 mas, bpa=2.389 degrees
! Estimated noise=0.632699 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000774156 Jy
! Component: 100  -  total flux cleaned = 0.000988086 Jy
! Component: 150  -  total flux cleaned = 0.00116616 Jy
! Component: 200  -  total flux cleaned = 0.0012599 Jy
! Total flux subtracted in 200 components = 0.0012599 Jy
! Clean residual min=-0.002308 max=0.002514 Jy/beam
! Clean residual mean=0.000002 rms=0.000650 Jy/beam
! Combined flux in latest and established models = 0.219473 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.10941e-05 Jy
! Component: 100  -  total flux cleaned = 1.85364e-05 Jy
! Component: 150  -  total flux cleaned = 1.90248e-05 Jy
! Component: 200  -  total flux cleaned = 9.06385e-06 Jy
! Total flux subtracted in 200 components = 9.06385e-06 Jy
! Clean residual min=-0.002306 max=0.002524 Jy/beam
! Clean residual mean=0.000002 rms=0.000648 Jy/beam
! Combined flux in latest and established models = 0.219482 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 64 components and 0.219482 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.71 mas, bmaj=7.423 mas, bpa=6.321 degrees
! Estimated noise=0.528323 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000361907 Jy
! Component: 100  -  total flux cleaned = -0.000505888 Jy
! Component: 150  -  total flux cleaned = -0.000545396 Jy
! Component: 200  -  total flux cleaned = -0.000545885 Jy
! Total flux subtracted in 200 components = -0.000545885 Jy
! Clean residual min=-0.002551 max=0.002392 Jy/beam
! Clean residual mean=0.000001 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.218936 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 75 components and 0.218936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058691Jy  sigma=1.169782
! Fit after  self-cal, rms=0.058685Jy  sigma=1.169636
wmodel J1333+2725_S_map.mod
! Writing 75 model components to file: J1333+2725_S_map.mod
wobs   J1333+2725_S_uvs.fits
! Writing UV FITS file: J1333+2725_S_uvs.fits
wwins  J1333+2725_S_map.win
! wwins: Wrote 2 windows to J1333+2725_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000357102 Jy
! Component: 100  -  total flux cleaned = -0.00051351 Jy
! Component: 150  -  total flux cleaned = -0.000514865 Jy
! Component: 200  -  total flux cleaned = -0.000411998 Jy
! Component: 250  -  total flux cleaned = -0.000543224 Jy
! Component: 300  -  total flux cleaned = -0.000671081 Jy
! Component: 350  -  total flux cleaned = -0.000795363 Jy
! Component: 400  -  total flux cleaned = -0.000916341 Jy
! Component: 450  -  total flux cleaned = -0.00103491 Jy
! Component: 500  -  total flux cleaned = -0.00118052 Jy
! Component: 550  -  total flux cleaned = -0.0013518 Jy
! Component: 600  -  total flux cleaned = -0.00149217 Jy
! Component: 650  -  total flux cleaned = -0.00171215 Jy
! Component: 700  -  total flux cleaned = -0.00179272 Jy
! Component: 750  -  total flux cleaned = -0.0018723 Jy
! Component: 800  -  total flux cleaned = -0.00192501 Jy
! Component: 850  -  total flux cleaned = -0.00202809 Jy
! Component: 900  -  total flux cleaned = -0.00207842 Jy
! Component: 950  -  total flux cleaned = -0.00212797 Jy
! Component: 1000  -  total flux cleaned = -0.00217689 Jy
! Component: 1050  -  total flux cleaned = -0.00222491 Jy
! Component: 1100  -  total flux cleaned = -0.00222494 Jy
! Component: 1150  -  total flux cleaned = -0.00227223 Jy
! Component: 1200  -  total flux cleaned = -0.00224954 Jy
! Component: 1250  -  total flux cleaned = -0.00234026 Jy
! Component: 1300  -  total flux cleaned = -0.00222721 Jy
! Component: 1350  -  total flux cleaned = -0.00227161 Jy
! Component: 1400  -  total flux cleaned = -0.00224944 Jy
! Component: 1450  -  total flux cleaned = -0.0022709 Jy
! Component: 1500  -  total flux cleaned = -0.00227104 Jy
! Component: 1550  -  total flux cleaned = -0.00222917 Jy
! Component: 1600  -  total flux cleaned = -0.00231254 Jy
! Component: 1650  -  total flux cleaned = -0.00231236 Jy
! Component: 1700  -  total flux cleaned = -0.00233285 Jy
! Component: 1750  -  total flux cleaned = -0.0023729 Jy
! Component: 1800  -  total flux cleaned = -0.00245228 Jy
! Component: 1850  -  total flux cleaned = -0.00245197 Jy
! Component: 1900  -  total flux cleaned = -0.00254902 Jy
! Component: 1950  -  total flux cleaned = -0.00254949 Jy
! Component: 2000  -  total flux cleaned = -0.00262597 Jy
! Component: 2050  -  total flux cleaned = -0.0027017 Jy
! Component: 2100  -  total flux cleaned = -0.00272026 Jy
! Component: 2150  -  total flux cleaned = -0.00281261 Jy
! Component: 2200  -  total flux cleaned = -0.00281251 Jy
! Component: 2250  -  total flux cleaned = -0.00283066 Jy
! Component: 2300  -  total flux cleaned = -0.00281297 Jy
! Component: 2350  -  total flux cleaned = -0.00290221 Jy
! Component: 2400  -  total flux cleaned = -0.00293782 Jy
! Component: 2450  -  total flux cleaned = -0.00297283 Jy
! Component: 2500  -  total flux cleaned = -0.0029552 Jy
! Component: 2550  -  total flux cleaned = -0.00302406 Jy
! Component: 2600  -  total flux cleaned = -0.00302401 Jy
! Component: 2650  -  total flux cleaned = -0.0030072 Jy
! Component: 2700  -  total flux cleaned = -0.00309114 Jy
! Component: 2750  -  total flux cleaned = -0.00312441 Jy
! Component: 2800  -  total flux cleaned = -0.00312423 Jy
! Component: 2850  -  total flux cleaned = -0.00310767 Jy
! Component: 2900  -  total flux cleaned = -0.00313995 Jy
! Component: 2950  -  total flux cleaned = -0.00312375 Jy
! Component: 3000  -  total flux cleaned = -0.00318742 Jy
! Component: 3050  -  total flux cleaned = -0.00314003 Jy
! Component: 3100  -  total flux cleaned = -0.00321845 Jy
! Component: 3150  -  total flux cleaned = -0.00318724 Jy
! Component: 3200  -  total flux cleaned = -0.00321803 Jy
! Component: 3250  -  total flux cleaned = -0.00323331 Jy
! Component: 3300  -  total flux cleaned = -0.00323322 Jy
! Component: 3350  -  total flux cleaned = -0.00320317 Jy
! Component: 3400  -  total flux cleaned = -0.0032482 Jy
! Component: 3450  -  total flux cleaned = -0.00321853 Jy
! Component: 3500  -  total flux cleaned = -0.00323339 Jy
! Component: 3550  -  total flux cleaned = -0.00321873 Jy
! Component: 3600  -  total flux cleaned = -0.00320423 Jy
! Component: 3650  -  total flux cleaned = -0.00318961 Jy
! Component: 3700  -  total flux cleaned = -0.00314649 Jy
! Component: 3750  -  total flux cleaned = -0.00311791 Jy
! Component: 3800  -  total flux cleaned = -0.00314645 Jy
! Component: 3850  -  total flux cleaned = -0.00308983 Jy
! Component: 3900  -  total flux cleaned = -0.00308982 Jy
! Component: 3950  -  total flux cleaned = -0.0030619 Jy
! Component: 4000  -  total flux cleaned = -0.00303416 Jy
! Component: 4050  -  total flux cleaned = -0.00303426 Jy
! Total flux subtracted in 4096 components = -0.00303432 Jy
! Clean residual min=-0.000815 max=0.000873 Jy/beam
! Clean residual mean=-0.000001 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.215902 Jy
keep
! Adding 282 model components to the UV plane model.
! The established model now contains 357 components and 0.215902 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1333+2725_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.71 x 7.423 at 6.321 degrees (North through East)
! Clean map  min=-0.0021366  max=0.18853 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1333+2725_S_map.fits
wmodel /vlbi/uf001/uva//J1333+2725_S_map.mod
! Writing 357 model components to file: /vlbi/uf001/uva//J1333+2725_S_map.mod
wobs   /vlbi/uf001/uva//J1333+2725_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1333+2725_S_uvs.fits
wwins  /vlbi/uf001/uva//J1333+2725_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J1333+2725_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.188531 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00025715 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.409189 0.409189 0.818377 1.63675 3.27351 6.54702 13.094 26.1881 52.3761
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.188 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  733.158 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1333+2725_S_dfm.log closed on Mon Jan 14 02:28:07 2019