! Started logfile: /vlbi/uf001/uvm//J1332+0719_X_a_dfm.log on Sun Jan 13 21:40:36 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1332+0719_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1332+0719_X_a_uvm.fits ! AN table 1: 108 integrations on 45 of 45 possible baselines. ! AN table 2: 74 integrations on 28 of 28 possible baselines. ! AN table 3: 74 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.93203 visibilities/baseline/integration-bin. ! Found source: J1332+0719 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 100704 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1332+0719_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.001577Jy sigma=23.942858 ! Fit after self-cal, rms=0.977136Jy sigma=23.363239 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7504 mas, bmaj=1.718 mas, bpa=-3.251 degrees ! Estimated noise=0.227943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0188891 Jy ! Component: 100 - total flux cleaned = 0.023009 Jy ! Total flux subtracted in 100 components = 0.023009 Jy ! Clean residual min=-0.001410 max=0.001601 Jy/beam ! Clean residual mean=0.000000 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.023009 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.023009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051703Jy sigma=1.179238 ! Fit after self-cal, rms=0.050007Jy sigma=1.137794 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00381601 Jy ! Component: 100 - total flux cleaned = 0.00383788 Jy ! Total flux subtracted in 100 components = 0.00383788 Jy ! Clean residual min=-0.001444 max=0.001692 Jy/beam ! Clean residual mean=0.000000 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.0268469 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0268469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049761Jy sigma=1.132261 ! Fit after self-cal, rms=0.049743Jy sigma=1.131967 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.984 mas, bmaj=2.207 mas, bpa=-8.382 degrees ! Estimated noise=0.0949213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.8, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136553 Jy ! Component: 100 - total flux cleaned = 0.0014887 Jy ! Component: 150 - total flux cleaned = 0.00146489 Jy ! Component: 200 - total flux cleaned = 0.00146489 Jy ! Total flux subtracted in 200 components = 0.00146489 Jy ! Clean residual min=-0.000980 max=0.001295 Jy/beam ! Clean residual mean=0.000001 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.0283117 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 25 components and 0.0283117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049701Jy sigma=1.130754 ! Fit after self-cal, rms=0.049669Jy sigma=1.130245 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.984 x 2.207 at -8.382 degrees (North through East) ! Clean map min=-0.00089723 max=0.027607 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.15 HN 1.02 KP 1.01 ! LA 0.97 MK 1.12 NL 1.34 OV 0.94 ! PT 0.92 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 HN 1.00 KP 0.97 LA 0.79 ! MK 1.02 NL 1.38 OV 0.93 PT 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.06 KP 0.97 LA 0.85 ! MK 1.16 NL 1.28 OV 0.94 PT 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.06 HN 1.02 KP 1.03 ! LA 1.12 MK 1.04 NL 1.30 OV 1.00 ! PT 0.97 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 HN 0.99 KP 1.18 LA 0.83 ! MK 1.07 NL 1.26 OV 1.00 PT 1.10 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 0.96 KP 1.12 LA 0.81 ! MK 1.20 NL 1.14 OV 1.04 PT 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.11 HN 0.96 KP 1.17 ! LA 1.06 MK 1.11 NL 1.26 OV 1.03 ! PT 1.03 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 HN 0.91 KP 1.07 LA 0.81 ! MK 1.04 NL 1.29 OV 0.96 PT 1.09 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.03 KP 1.11 LA 0.79 ! MK 1.07 NL 1.18 OV 1.05 PT 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.11 HN 0.95 KP 1.05 ! LA 1.07 MK 1.07 NL 1.31 OV 1.03 ! PT 1.10 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 HN 0.96 KP 1.10 LA 0.82 ! MK 1.10 NL 1.41 OV 0.98 PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.04 KP 1.28 LA 0.77 ! MK 1.06 NL 1.27 OV 1.08 PT 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.08 HN 0.86 KP 1.16 ! LA 1.05 MK 1.07 NL 1.31 OV 0.97 ! PT 0.97 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 HN 0.88 KP 1.07 LA 0.76 ! MK 1.01 NL 1.21 OV 1.00 PT 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.91 FD 1.01 KP 1.20 LA 0.85 ! MK 1.06 NL 1.22 OV 1.00 PT 1.07 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 0.97 KP 1.24 ! LA 0.95 MK 1.12 NL 1.26 OV 0.90 ! PT 1.04 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 HN 1.02 KP 1.17 LA 0.70 ! MK 1.03 NL 1.23 OV 0.92 PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.98 KP 1.18 LA 0.76 ! MK 0.98 NL 1.20 OV 1.04 PT 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.09 HN 0.94 KP 1.15 ! LA 1.05 MK 1.00 NL 1.21 OV 0.99 ! PT 1.00 SC 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 HN 0.90 KP 1.16 LA 0.71 ! MK 0.96 NL 1.24 OV 1.02 PT 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 0.81 KP 1.30 LA 0.84 ! MK 1.06 NL 1.20 OV 0.88 PT 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 0.85 KP 1.24 ! LA 1.05 MK 1.00 NL 1.20 OV 0.95 ! PT 0.99 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 HN 0.84 KP 1.17 LA 0.76 ! MK 1.06 NL 1.21 OV 1.01 PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.92 KP 1.17 LA 0.85 ! MK 1.00 NL 1.17 OV 0.91 PT 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.08 HN 0.80 KP 1.08 ! LA 1.06 MK 1.02 NL 1.24 OV 0.88 ! PT 0.99 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.87 HN 0.83 KP 1.11 LA 0.74 ! MK 1.00 NL 1.21 OV 0.97 PT 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.90 FD 0.94 KP 1.09 LA 0.84 ! MK 0.95 NL 1.12 OV 0.93 PT 0.89 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.84 KP 1.23 ! LA 0.97 MK 0.97 NL 1.16 OV 0.95 ! PT 0.99 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 HN 0.89 KP 1.10 LA 0.70 ! MK 0.91 NL 1.29 OV 0.84 PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.85 FD 1.01 KP 1.00 LA 0.77 ! MK 0.94 NL 1.21 OV 0.88 PT 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 0.83 KP 1.10 ! LA 0.92 MK 0.86 NL 1.19 OV 0.96 ! PT 0.87 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.87 HN 0.85 KP 1.09 LA 0.79 ! MK 0.75 NL 1.30 OV 0.79 PT 0.89 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.81 FD 0.86 KP 1.09 LA 0.74 ! MK 0.74 NL 1.20 OV 0.91 PT 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.90 HN 0.84 KP 1.01 ! LA 0.96 MK 0.77 NL 1.26 OV 0.84 ! PT 0.83 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.87 HN 0.79 KP 0.98 LA 0.77 ! MK 0.74 NL 1.05 OV 0.90 PT 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.79 FD 0.83 KP 1.00 LA 0.75 ! MK 0.79 NL 1.15 OV 0.92 PT 0.89 ! ! ! Fit before self-cal, rms=0.049669Jy sigma=1.130245 ! Fit after self-cal, rms=0.048517Jy sigma=1.122793 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9733 mas, bmaj=2.189 mas, bpa=-7.872 degrees ! Estimated noise=0.0939799 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000247791 Jy ! Component: 100 - total flux cleaned = -0.000248683 Jy ! Component: 150 - total flux cleaned = -0.000263173 Jy ! Component: 200 - total flux cleaned = -0.000271719 Jy ! Total flux subtracted in 200 components = -0.000271719 Jy ! Clean residual min=-0.000503 max=0.000442 Jy/beam ! Clean residual mean=0.000000 rms=0.000105 Jy/beam ! Combined flux in latest and established models = 0.02804 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 43 components and 0.02804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048515Jy sigma=1.122751 ! Fit after self-cal, rms=0.048672Jy sigma=1.120317 ! Inverting map ! Added new window around map position (29.4, -8.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000359009 Jy ! Component: 100 - total flux cleaned = 0.000359672 Jy ! Component: 150 - total flux cleaned = 0.000368621 Jy ! Component: 200 - total flux cleaned = 0.00036045 Jy ! Total flux subtracted in 200 components = 0.00036045 Jy ! Clean residual min=-0.000527 max=0.000500 Jy/beam ! Clean residual mean=0.000000 rms=0.000121 Jy/beam ! Combined flux in latest and established models = 0.0284005 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 57 components and 0.0284005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048665Jy sigma=1.120160 ! Fit after self-cal, rms=0.048669Jy sigma=1.119983 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048669Jy sigma=1.119983 ! Fit after self-cal, rms=0.049655Jy sigma=1.118732 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9719 mas, bmaj=2.185 mas, bpa=-7.607 degrees ! Estimated noise=0.0940511 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00013851 Jy ! Component: 100 - total flux cleaned = -0.000207067 Jy ! Component: 150 - total flux cleaned = -0.000261197 Jy ! Component: 200 - total flux cleaned = -0.00030108 Jy ! Total flux subtracted in 200 components = -0.00030108 Jy ! Clean residual min=-0.000425 max=0.000439 Jy/beam ! Clean residual mean=0.000000 rms=0.000101 Jy/beam ! Combined flux in latest and established models = 0.0280994 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 72 components and 0.0280994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049652Jy sigma=1.118672 ! Fit after self-cal, rms=0.049771Jy sigma=1.118070 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.53197e-05 Jy ! Component: 100 - total flux cleaned = 1.33371e-05 Jy ! Component: 150 - total flux cleaned = -1.85155e-05 Jy ! Component: 200 - total flux cleaned = -4.62671e-05 Jy ! Total flux subtracted in 200 components = -4.62671e-05 Jy ! Clean residual min=-0.000454 max=0.000440 Jy/beam ! Clean residual mean=0.000000 rms=0.000105 Jy/beam ! Combined flux in latest and established models = 0.0280531 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 83 components and 0.0280531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049768Jy sigma=1.118039 ! Fit after self-cal, rms=0.049772Jy sigma=1.117972 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049772Jy sigma=1.117972 ! Fit after self-cal, rms=0.050367Jy sigma=1.117771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9722 mas, bmaj=2.187 mas, bpa=-7.55 degrees ! Estimated noise=0.0940505 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000112635 Jy ! Component: 100 - total flux cleaned = -0.000165225 Jy ! Component: 150 - total flux cleaned = -0.00022094 Jy ! Component: 200 - total flux cleaned = -0.000265889 Jy ! Total flux subtracted in 200 components = -0.000265889 Jy ! Clean residual min=-0.000430 max=0.000437 Jy/beam ! Clean residual mean=0.000000 rms=0.000101 Jy/beam ! Combined flux in latest and established models = 0.0277872 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 87 components and 0.0277872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050365Jy sigma=1.117739 ! Fit after self-cal, rms=0.050428Jy sigma=1.117542 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.74703e-05 Jy ! Component: 100 - total flux cleaned = -5.13536e-05 Jy ! Component: 150 - total flux cleaned = -7.77846e-05 Jy ! Component: 200 - total flux cleaned = -0.000111135 Jy ! Total flux subtracted in 200 components = -0.000111135 Jy ! Clean residual min=-0.000439 max=0.000445 Jy/beam ! Clean residual mean=0.000000 rms=0.000101 Jy/beam ! Combined flux in latest and established models = 0.0276761 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 90 components and 0.0276761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050427Jy sigma=1.117518 ! Fit after self-cal, rms=0.050428Jy sigma=1.117488 ! Inverting map ! Added new window around map position (27.6, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000418266 Jy ! Component: 100 - total flux cleaned = 0.000644833 Jy ! Component: 150 - total flux cleaned = 0.000818515 Jy ! Component: 200 - total flux cleaned = 0.000913701 Jy ! Total flux subtracted in 200 components = 0.000913701 Jy ! Clean residual min=-0.000423 max=0.000381 Jy/beam ! Clean residual mean=0.000000 rms=0.000096 Jy/beam ! Combined flux in latest and established models = 0.0285898 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 109 components and 0.0285898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050425Jy sigma=1.117388 ! Fit after self-cal, rms=0.050428Jy sigma=1.117341 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050428Jy sigma=1.117341 ! Fit after self-cal, rms=0.050699Jy sigma=1.117277 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.213 mas, bmaj=3.254 mas, bpa=2.172 degrees ! Estimated noise=0.115379 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00035098 Jy ! Component: 100 - total flux cleaned = 0.000450421 Jy ! Component: 150 - total flux cleaned = 0.000437562 Jy ! Component: 200 - total flux cleaned = 0.000410677 Jy ! Total flux subtracted in 200 components = 0.000410677 Jy ! Clean residual min=-0.000378 max=0.000430 Jy/beam ! Clean residual mean=0.000001 rms=0.000114 Jy/beam ! Combined flux in latest and established models = 0.0290005 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 131 components and 0.0290005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050696Jy sigma=1.117235 ! Fit after self-cal, rms=0.050734Jy sigma=1.117147 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000271904 Jy ! Component: 100 - total flux cleaned = 0.000340187 Jy ! Component: 150 - total flux cleaned = 0.000361772 Jy ! Component: 200 - total flux cleaned = 0.000352087 Jy ! Total flux subtracted in 200 components = 0.000352087 Jy ! Clean residual min=-0.000405 max=0.000428 Jy/beam ! Clean residual mean=0.000001 rms=0.000114 Jy/beam ! Combined flux in latest and established models = 0.0293526 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 145 components and 0.0293526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050733Jy sigma=1.117124 ! Fit after self-cal, rms=0.050737Jy sigma=1.117059 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9731 mas, bmaj=2.192 mas, bpa=-7.547 degrees ! Estimated noise=0.0939575 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9731 x 2.192 at -7.547 degrees (North through East) ! Clean map min=-0.00066365 max=0.026952 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7374 mas, bmaj=1.711 mas, bpa=-2.869 degrees ! Estimated noise=0.222463 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.021365 Jy ! Component: 100 - total flux cleaned = 0.0260243 Jy ! Component: 150 - total flux cleaned = 0.0270464 Jy ! Component: 200 - total flux cleaned = 0.0276428 Jy ! Total flux subtracted in 200 components = 0.0276428 Jy ! Clean residual min=-0.001161 max=0.001162 Jy/beam ! Clean residual mean=0.000000 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.0276428 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0276428 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9731 mas, bmaj=2.192 mas, bpa=-7.547 degrees ! Estimated noise=0.0939575 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000863953 Jy ! Component: 100 - total flux cleaned = 0.00121749 Jy ! Component: 150 - total flux cleaned = 0.00130787 Jy ! Component: 200 - total flux cleaned = 0.00142574 Jy ! Total flux subtracted in 200 components = 0.00142574 Jy ! Clean residual min=-0.000498 max=0.000495 Jy/beam ! Clean residual mean=0.000000 rms=0.000110 Jy/beam ! Combined flux in latest and established models = 0.0290685 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 36 components and 0.0290685 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.213 mas, bmaj=3.254 mas, bpa=2.172 degrees ! Estimated noise=0.115379 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000263209 Jy ! Component: 100 - total flux cleaned = 0.00043335 Jy ! Component: 150 - total flux cleaned = 0.00048008 Jy ! Component: 200 - total flux cleaned = 0.000521411 Jy ! Total flux subtracted in 200 components = 0.000521411 Jy ! Clean residual min=-0.000413 max=0.000479 Jy/beam ! Clean residual mean=0.000001 rms=0.000120 Jy/beam ! Combined flux in latest and established models = 0.0295899 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.4454e-05 Jy ! Component: 100 - total flux cleaned = 0.000102901 Jy ! Component: 150 - total flux cleaned = 0.000125073 Jy ! Component: 200 - total flux cleaned = 0.000138702 Jy ! Total flux subtracted in 200 components = 0.000138702 Jy ! Clean residual min=-0.000414 max=0.000459 Jy/beam ! Clean residual mean=0.000001 rms=0.000116 Jy/beam ! Combined flux in latest and established models = 0.0297286 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 75 components and 0.0297286 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9731 mas, bmaj=2.192 mas, bpa=-7.547 degrees ! Estimated noise=0.0939575 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109699 Jy ! Component: 100 - total flux cleaned = 0.000186878 Jy ! Component: 150 - total flux cleaned = 0.000221674 Jy ! Component: 200 - total flux cleaned = 0.000264159 Jy ! Total flux subtracted in 200 components = 0.000264159 Jy ! Clean residual min=-0.000441 max=0.000398 Jy/beam ! Clean residual mean=0.000000 rms=0.000097 Jy/beam ! Combined flux in latest and established models = 0.0299928 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 89 components and 0.0299928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050742Jy sigma=1.117214 ! Fit after self-cal, rms=0.050743Jy sigma=1.117103 wmodel J1332+0719_X_a_map.mod ! Writing 89 model components to file: J1332+0719_X_a_map.mod wobs J1332+0719_X_a_uvs.fits ! Writing UV FITS file: J1332+0719_X_a_uvs.fits wwins J1332+0719_X_a_map.win ! wwins: Wrote 4 windows to J1332+0719_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -9.75424e-05 Jy ! Component: 100 - total flux cleaned = -0.00011849 Jy ! Component: 150 - total flux cleaned = -0.000131558 Jy ! Component: 200 - total flux cleaned = -0.000150783 Jy ! Component: 250 - total flux cleaned = -0.000163102 Jy ! Component: 300 - total flux cleaned = -0.000169102 Jy ! Component: 350 - total flux cleaned = -0.00017496 Jy ! Component: 400 - total flux cleaned = -0.000180697 Jy ! Component: 450 - total flux cleaned = -0.000180624 Jy ! Component: 500 - total flux cleaned = -0.000163914 Jy ! Component: 550 - total flux cleaned = -0.000163892 Jy ! Component: 600 - total flux cleaned = -0.000152978 Jy ! Component: 650 - total flux cleaned = -0.000126185 Jy ! Component: 700 - total flux cleaned = -0.000115638 Jy ! Component: 750 - total flux cleaned = -0.000115617 Jy ! Component: 800 - total flux cleaned = -0.000105343 Jy ! Component: 850 - total flux cleaned = -0.000100216 Jy ! Component: 900 - total flux cleaned = -9.51827e-05 Jy ! Component: 950 - total flux cleaned = -0.000120006 Jy ! Component: 1000 - total flux cleaned = -0.000105135 Jy ! Component: 1050 - total flux cleaned = -0.000105154 Jy ! Component: 1100 - total flux cleaned = -0.000114851 Jy ! Component: 1150 - total flux cleaned = -0.00011962 Jy ! Component: 1200 - total flux cleaned = -0.000119647 Jy ! Component: 1250 - total flux cleaned = -0.00012447 Jy ! Component: 1300 - total flux cleaned = -0.000143113 Jy ! Component: 1350 - total flux cleaned = -0.000161575 Jy ! Component: 1400 - total flux cleaned = -0.000170677 Jy ! Component: 1450 - total flux cleaned = -0.000157054 Jy ! Component: 1500 - total flux cleaned = -0.00016612 Jy ! Component: 1550 - total flux cleaned = -0.000170567 Jy ! Component: 1600 - total flux cleaned = -0.000183962 Jy ! Component: 1650 - total flux cleaned = -0.000197197 Jy ! Component: 1700 - total flux cleaned = -0.000188494 Jy ! Component: 1750 - total flux cleaned = -0.000201488 Jy ! Component: 1800 - total flux cleaned = -0.000197184 Jy ! Component: 1850 - total flux cleaned = -0.00018868 Jy ! Component: 1900 - total flux cleaned = -0.00017593 Jy ! Component: 1950 - total flux cleaned = -0.000171706 Jy ! Component: 2000 - total flux cleaned = -0.000171723 Jy ! Component: 2050 - total flux cleaned = -0.000175882 Jy ! Component: 2100 - total flux cleaned = -0.000171753 Jy ! Component: 2150 - total flux cleaned = -0.000163523 Jy ! Component: 2200 - total flux cleaned = -0.000163507 Jy ! Component: 2250 - total flux cleaned = -0.000147298 Jy ! Component: 2300 - total flux cleaned = -0.00013123 Jy ! Component: 2350 - total flux cleaned = -0.000131219 Jy ! Component: 2400 - total flux cleaned = -0.000127264 Jy ! Component: 2450 - total flux cleaned = -0.000119347 Jy ! Component: 2500 - total flux cleaned = -0.000115396 Jy ! Component: 2550 - total flux cleaned = -9.19617e-05 Jy ! Component: 2600 - total flux cleaned = -7.64355e-05 Jy ! Component: 2650 - total flux cleaned = -8.41402e-05 Jy ! Component: 2700 - total flux cleaned = -5.7276e-05 Jy ! Component: 2750 - total flux cleaned = -4.96324e-05 Jy ! Component: 2800 - total flux cleaned = -5.34183e-05 Jy ! Component: 2850 - total flux cleaned = -3.83229e-05 Jy ! Component: 2900 - total flux cleaned = -4.20684e-05 Jy ! Component: 2950 - total flux cleaned = -2.34118e-05 Jy ! Component: 3000 - total flux cleaned = -4.86892e-06 Jy ! Component: 3050 - total flux cleaned = -8.57242e-06 Jy ! Component: 3100 - total flux cleaned = 6.15026e-06 Jy ! Component: 3150 - total flux cleaned = 1.34641e-05 Jy ! Component: 3200 - total flux cleaned = 2.80162e-05 Jy ! Component: 3250 - total flux cleaned = 2.07653e-05 Jy ! Component: 3300 - total flux cleaned = 2.43938e-05 Jy ! Component: 3350 - total flux cleaned = 4.23186e-05 Jy ! Component: 3400 - total flux cleaned = 3.87584e-05 Jy ! Component: 3450 - total flux cleaned = 4.22959e-05 Jy ! Component: 3500 - total flux cleaned = 4.93639e-05 Jy ! Component: 3550 - total flux cleaned = 5.28583e-05 Jy ! Component: 3600 - total flux cleaned = 5.28621e-05 Jy ! Component: 3650 - total flux cleaned = 3.19661e-05 Jy ! Component: 3700 - total flux cleaned = 4.58318e-05 Jy ! Component: 3750 - total flux cleaned = 5.27299e-05 Jy ! Component: 3800 - total flux cleaned = 4.23955e-05 Jy ! Component: 3850 - total flux cleaned = 4.92561e-05 Jy ! Component: 3900 - total flux cleaned = 5.26648e-05 Jy ! Component: 3950 - total flux cleaned = 4.58758e-05 Jy ! Component: 4000 - total flux cleaned = 5.60175e-05 Jy ! Component: 4050 - total flux cleaned = 5.93829e-05 Jy ! Total flux subtracted in 4096 components = 5.93847e-05 Jy ! Clean residual min=-0.000199 max=0.000187 Jy/beam ! Clean residual mean=0.000000 rms=0.000059 Jy/beam ! Combined flux in latest and established models = 0.0300522 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 389 components and 0.0300521 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1332+0719_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9731 x 2.192 at -7.547 degrees (North through East) ! Clean map min=-0.0006361 max=0.026863 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1332+0719_X_a_map.fits wmodel /vlbi/uf001/uvm//J1332+0719_X_a_map.mod ! Writing 389 model components to file: /vlbi/uf001/uvm//J1332+0719_X_a_map.mod wobs /vlbi/uf001/uvm//J1332+0719_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1332+0719_X_a_uvs.fits wwins /vlbi/uf001/uvm//J1332+0719_X_a_map.win ! wwins: Wrote 5 windows to /vlbi/uf001/uvm//J1332+0719_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0268625 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 5.88344e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.657062 0.657062 1.31412 2.62825 5.25649 10.513 21.026 42.052 84.1039 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.026 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 456.578 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1332+0719_X_a_dfm.log closed on Sun Jan 13 21:40:46 2019