! Started logfile: /vlbi/uf001/uva//J1331-0341_S_dfm.log on Mon Jan 14 02:26:41 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1331-0341_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1331-0341_S_uva.fits ! AN table 1: 42 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.988095 visibilities/baseline/integration-bin. ! Found source: J1331-0341 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 3486 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1331-0341_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.014033Jy sigma=17.536652 ! Fit after self-cal, rms=0.887238Jy sigma=15.198417 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.483 mas, bmaj=6.165 mas, bpa=-3.281 degrees ! Estimated noise=0.922862 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0891801 Jy ! Component: 100 - total flux cleaned = 0.110792 Jy ! Total flux subtracted in 100 components = 0.110792 Jy ! Clean residual min=-0.008572 max=0.009369 Jy/beam ! Clean residual mean=0.000002 rms=0.001907 Jy/beam ! Combined flux in latest and established models = 0.110792 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.110792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.081230Jy sigma=1.298079 ! Fit after self-cal, rms=0.080942Jy sigma=1.296083 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.835 mas, bmaj=6.76 mas, bpa=-2.557 degrees ! Estimated noise=0.767609 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124191 Jy ! Component: 100 - total flux cleaned = 0.0184156 Jy ! Component: 150 - total flux cleaned = 0.0217814 Jy ! Component: 200 - total flux cleaned = 0.0228954 Jy ! Total flux subtracted in 200 components = 0.0228954 Jy ! Clean residual min=-0.006672 max=0.007590 Jy/beam ! Clean residual mean=0.000005 rms=0.001731 Jy/beam ! Combined flux in latest and established models = 0.133688 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 19 components and 0.133688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.079543Jy sigma=1.258783 ! Fit after self-cal, rms=0.079529Jy sigma=1.258195 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.835 x 6.76 at -2.557 degrees (North through East) ! Clean map min=-0.0064773 max=0.11776 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.72 HN 1.01 LA 0.85 MK 1.04 ! NL 1.16 OV 1.22 PT 0.96 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 0.93 LA 0.91 MK 0.97 ! NL 1.06 OV 1.23 PT 1.00 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 HN 1.02 LA 0.92 MK 1.02 ! NL 1.06 OV 1.22 PT 0.99 SC 1.02 ! ! ! Fit before self-cal, rms=0.079529Jy sigma=1.258195 ! Fit after self-cal, rms=0.078496Jy sigma=1.216191 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.867 mas, bmaj=6.75 mas, bpa=-2.582 degrees ! Estimated noise=0.758053 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00084521 Jy ! Component: 100 - total flux cleaned = -0.00106429 Jy ! Component: 150 - total flux cleaned = -0.00120905 Jy ! Component: 200 - total flux cleaned = -0.00132541 Jy ! Total flux subtracted in 200 components = -0.00132541 Jy ! Clean residual min=-0.004483 max=0.004938 Jy/beam ! Clean residual mean=-0.000007 rms=0.001141 Jy/beam ! Combined flux in latest and established models = 0.132362 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 36 components and 0.132362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078444Jy sigma=1.216056 ! Fit after self-cal, rms=0.078679Jy sigma=1.214862 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078679Jy sigma=1.214862 ! Fit after self-cal, rms=0.087158Jy sigma=1.198482 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.861 mas, bmaj=6.739 mas, bpa=-2.431 degrees ! Estimated noise=0.760976 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000969041 Jy ! Component: 100 - total flux cleaned = 0.00121492 Jy ! Component: 150 - total flux cleaned = 0.00126474 Jy ! Component: 200 - total flux cleaned = 0.00129301 Jy ! Total flux subtracted in 200 components = 0.00129301 Jy ! Clean residual min=-0.003729 max=0.003996 Jy/beam ! Clean residual mean=-0.000002 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.133655 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.133655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087139Jy sigma=1.198348 ! Fit after self-cal, rms=0.087316Jy sigma=1.198057 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-83.5, -112). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00330997 Jy ! Component: 100 - total flux cleaned = 0.00383102 Jy ! Component: 150 - total flux cleaned = 0.00377093 Jy ! Component: 200 - total flux cleaned = 0.00367078 Jy ! Total flux subtracted in 200 components = 0.00367078 Jy ! Clean residual min=-0.003629 max=0.003628 Jy/beam ! Clean residual mean=-0.000005 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.137326 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 64 components and 0.137326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087152Jy sigma=1.194735 ! Fit after self-cal, rms=0.087164Jy sigma=1.194477 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087164Jy sigma=1.194477 ! Fit after self-cal, rms=0.092743Jy sigma=1.192507 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.855 mas, bmaj=6.728 mas, bpa=-2.381 degrees ! Estimated noise=0.760115 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0008219 Jy ! Component: 100 - total flux cleaned = 0.000913081 Jy ! Component: 150 - total flux cleaned = 0.000872569 Jy ! Component: 200 - total flux cleaned = 0.000871818 Jy ! Total flux subtracted in 200 components = 0.000871818 Jy ! Clean residual min=-0.003190 max=0.003551 Jy/beam ! Clean residual mean=-0.000002 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.138198 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 75 components and 0.138198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.092703Jy sigma=1.191603 ! Fit after self-cal, rms=0.092752Jy sigma=1.191534 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-29.5, -80). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00303997 Jy ! Component: 100 - total flux cleaned = 0.00355448 Jy ! Component: 150 - total flux cleaned = 0.0040517 Jy ! Component: 200 - total flux cleaned = 0.00449358 Jy ! Total flux subtracted in 200 components = 0.00449358 Jy ! Clean residual min=-0.002985 max=0.003140 Jy/beam ! Clean residual mean=0.000000 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.142691 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 98 components and 0.142691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.092550Jy sigma=1.189217 ! Fit after self-cal, rms=0.092562Jy sigma=1.189070 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.092562Jy sigma=1.189070 ! Fit after self-cal, rms=0.092223Jy sigma=1.188914 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.389 mas, bmaj=11.41 mas, bpa=3.448 degrees ! Estimated noise=1.05579 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000485314 Jy ! Component: 100 - total flux cleaned = 0.000763569 Jy ! Component: 150 - total flux cleaned = 0.000896154 Jy ! Component: 200 - total flux cleaned = 0.00108664 Jy ! Total flux subtracted in 200 components = 0.00108664 Jy ! Clean residual min=-0.003932 max=0.003863 Jy/beam ! Clean residual mean=-0.000001 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 0.143778 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 115 components and 0.143778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.092180Jy sigma=1.188796 ! Fit after self-cal, rms=0.092189Jy sigma=1.188717 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000162292 Jy ! Component: 100 - total flux cleaned = 0.000163142 Jy ! Component: 150 - total flux cleaned = 0.000101562 Jy ! Component: 200 - total flux cleaned = 0.000129436 Jy ! Total flux subtracted in 200 components = 0.000129436 Jy ! Clean residual min=-0.003893 max=0.003854 Jy/beam ! Clean residual mean=-0.000002 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.143907 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 121 components and 0.143907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.092175Jy sigma=1.188738 ! Fit after self-cal, rms=0.092178Jy sigma=1.188705 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.857 mas, bmaj=6.731 mas, bpa=-2.399 degrees ! Estimated noise=0.759412 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.857 x 6.731 at -2.399 degrees (North through East) ! Clean map min=-0.0029163 max=0.11642 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.499 mas, bmaj=6.117 mas, bpa=-3.143 degrees ! Estimated noise=0.920044 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.088672 Jy ! Component: 100 - total flux cleaned = 0.110173 Jy ! Component: 150 - total flux cleaned = 0.12014 Jy ! Component: 200 - total flux cleaned = 0.12649 Jy ! Total flux subtracted in 200 components = 0.12649 Jy ! Clean residual min=-0.004574 max=0.004592 Jy/beam ! Clean residual mean=0.000001 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 0.126489 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.126489 Jy ! Inverting map and beam ! Estimated beam: bmin=2.857 mas, bmaj=6.731 mas, bpa=-2.399 degrees ! Estimated noise=0.759412 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00522751 Jy ! Component: 100 - total flux cleaned = 0.00885366 Jy ! Component: 150 - total flux cleaned = 0.0116902 Jy ! Component: 200 - total flux cleaned = 0.0135942 Jy ! Total flux subtracted in 200 components = 0.0135942 Jy ! Clean residual min=-0.003283 max=0.003031 Jy/beam ! Clean residual mean=-0.000000 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 0.140084 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 36 components and 0.140084 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.389 mas, bmaj=11.41 mas, bpa=3.448 degrees ! Estimated noise=1.05579 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240765 Jy ! Component: 100 - total flux cleaned = 0.00309068 Jy ! Component: 150 - total flux cleaned = 0.00336413 Jy ! Component: 200 - total flux cleaned = 0.00354321 Jy ! Total flux subtracted in 200 components = 0.00354321 Jy ! Clean residual min=-0.004161 max=0.004226 Jy/beam ! Clean residual mean=-0.000002 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.143627 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000107271 Jy ! Component: 100 - total flux cleaned = 0.000154939 Jy ! Component: 150 - total flux cleaned = 0.000235261 Jy ! Component: 200 - total flux cleaned = 0.00023312 Jy ! Total flux subtracted in 200 components = 0.00023312 Jy ! Clean residual min=-0.003955 max=0.004004 Jy/beam ! Clean residual mean=-0.000002 rms=0.001125 Jy/beam ! Combined flux in latest and established models = 0.14386 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 79 components and 0.14386 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.857 mas, bmaj=6.731 mas, bpa=-2.399 degrees ! Estimated noise=0.759412 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000544018 Jy ! Component: 100 - total flux cleaned = -0.000293682 Jy ! Component: 150 - total flux cleaned = -0.000236902 Jy ! Component: 200 - total flux cleaned = -3.5986e-05 Jy ! Total flux subtracted in 200 components = -3.5986e-05 Jy ! Clean residual min=-0.003288 max=0.003168 Jy/beam ! Clean residual mean=-0.000001 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.143824 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 93 components and 0.143824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.092217Jy sigma=1.189449 ! Fit after self-cal, rms=0.092222Jy sigma=1.189195 wmodel J1331-0341_S_map.mod ! Writing 93 model components to file: J1331-0341_S_map.mod wobs J1331-0341_S_uvs.fits ! Writing UV FITS file: J1331-0341_S_uvs.fits wwins J1331-0341_S_map.win ! wwins: Wrote 3 windows to J1331-0341_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000236264 Jy ! Component: 100 - total flux cleaned = 0.000235246 Jy ! Component: 150 - total flux cleaned = 0.000237358 Jy ! Component: 200 - total flux cleaned = 0.000190739 Jy ! Component: 250 - total flux cleaned = 4.93844e-05 Jy ! Component: 300 - total flux cleaned = -0.000178675 Jy ! Component: 350 - total flux cleaned = -0.000355968 Jy ! Component: 400 - total flux cleaned = -0.000399835 Jy ! Component: 450 - total flux cleaned = -0.000528121 Jy ! Component: 500 - total flux cleaned = -0.000487375 Jy ! Component: 550 - total flux cleaned = -0.000528696 Jy ! Component: 600 - total flux cleaned = -0.000608901 Jy ! Component: 650 - total flux cleaned = -0.000726686 Jy ! Component: 700 - total flux cleaned = -0.000688183 Jy ! Component: 750 - total flux cleaned = -0.000726607 Jy ! Component: 800 - total flux cleaned = -0.000726532 Jy ! Component: 850 - total flux cleaned = -0.00065335 Jy ! Component: 900 - total flux cleaned = -0.0006899 Jy ! Component: 950 - total flux cleaned = -0.000654678 Jy ! Component: 1000 - total flux cleaned = -0.000689553 Jy ! Component: 1050 - total flux cleaned = -0.000655044 Jy ! Component: 1100 - total flux cleaned = -0.000689173 Jy ! Component: 1150 - total flux cleaned = -0.000621663 Jy ! Component: 1200 - total flux cleaned = -0.000522938 Jy ! Component: 1250 - total flux cleaned = -0.000555908 Jy ! Component: 1300 - total flux cleaned = -0.00052399 Jy ! Component: 1350 - total flux cleaned = -0.000492907 Jy ! Component: 1400 - total flux cleaned = -0.000431059 Jy ! Component: 1450 - total flux cleaned = -0.0004622 Jy ! Component: 1500 - total flux cleaned = -0.000401664 Jy ! Component: 1550 - total flux cleaned = -0.000431224 Jy ! Component: 1600 - total flux cleaned = -0.000371587 Jy ! Component: 1650 - total flux cleaned = -0.000401001 Jy ! Component: 1700 - total flux cleaned = -0.000429974 Jy ! Component: 1750 - total flux cleaned = -0.000344148 Jy ! Component: 1800 - total flux cleaned = -0.00028743 Jy ! Component: 1850 - total flux cleaned = -0.000259383 Jy ! Component: 1900 - total flux cleaned = -0.000369919 Jy ! Component: 1950 - total flux cleaned = -0.000314995 Jy ! Component: 2000 - total flux cleaned = -0.000288028 Jy ! Component: 2050 - total flux cleaned = -0.00026141 Jy ! Component: 2100 - total flux cleaned = -0.000340444 Jy ! Component: 2150 - total flux cleaned = -0.000340434 Jy ! Component: 2200 - total flux cleaned = -0.000392495 Jy ! Component: 2250 - total flux cleaned = -0.000443811 Jy ! Component: 2300 - total flux cleaned = -0.000443767 Jy ! Component: 2350 - total flux cleaned = -0.000543814 Jy ! Component: 2400 - total flux cleaned = -0.00054371 Jy ! Component: 2450 - total flux cleaned = -0.000494618 Jy ! Component: 2500 - total flux cleaned = -0.000640654 Jy ! Component: 2550 - total flux cleaned = -0.000664675 Jy ! Component: 2600 - total flux cleaned = -0.000712529 Jy ! Component: 2650 - total flux cleaned = -0.000736088 Jy ! Component: 2700 - total flux cleaned = -0.000806251 Jy ! Component: 2750 - total flux cleaned = -0.000875598 Jy ! Component: 2800 - total flux cleaned = -0.000806422 Jy ! Component: 2850 - total flux cleaned = -0.000920377 Jy ! Component: 2900 - total flux cleaned = -0.000897835 Jy ! Component: 2950 - total flux cleaned = -0.00103249 Jy ! Component: 3000 - total flux cleaned = -0.00109886 Jy ! Component: 3050 - total flux cleaned = -0.00098867 Jy ! Component: 3100 - total flux cleaned = -0.00107629 Jy ! Component: 3150 - total flux cleaned = -0.00111962 Jy ! Component: 3200 - total flux cleaned = -0.00109832 Jy ! Component: 3250 - total flux cleaned = -0.00118369 Jy ! Component: 3300 - total flux cleaned = -0.0011625 Jy ! Component: 3350 - total flux cleaned = -0.00124666 Jy ! Component: 3400 - total flux cleaned = -0.00124645 Jy ! Component: 3450 - total flux cleaned = -0.00126703 Jy ! Component: 3500 - total flux cleaned = -0.001308 Jy ! Component: 3550 - total flux cleaned = -0.00134866 Jy ! Component: 3600 - total flux cleaned = -0.00142948 Jy ! Component: 3650 - total flux cleaned = -0.00146932 Jy ! Component: 3700 - total flux cleaned = -0.00142949 Jy ! Component: 3750 - total flux cleaned = -0.00148896 Jy ! Component: 3800 - total flux cleaned = -0.00156751 Jy ! Component: 3850 - total flux cleaned = -0.00154817 Jy ! Component: 3900 - total flux cleaned = -0.00158698 Jy ! Component: 3950 - total flux cleaned = -0.00166404 Jy ! Component: 4000 - total flux cleaned = -0.00170231 Jy ! Component: 4050 - total flux cleaned = -0.00172118 Jy ! Total flux subtracted in 4096 components = -0.00174007 Jy ! Clean residual min=-0.001108 max=0.001030 Jy/beam ! Clean residual mean=0.000001 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.142084 Jy keep ! Adding 314 model components to the UV plane model. ! The established model now contains 407 components and 0.142084 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1331-0341_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.857 x 6.731 at -2.399 degrees (North through East) ! Clean map min=-0.0024171 max=0.11625 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1331-0341_S_map.fits wmodel /vlbi/uf001/uva//J1331-0341_S_map.mod ! Writing 407 model components to file: /vlbi/uf001/uva//J1331-0341_S_map.mod wobs /vlbi/uf001/uva//J1331-0341_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1331-0341_S_uvs.fits wwins /vlbi/uf001/uva//J1331-0341_S_map.win ! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1331-0341_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.116251 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000335545 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.865916 0.865916 1.73183 3.46366 6.92733 13.8547 27.7093 55.4186 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.116 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 346.454 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1331-0341_S_dfm.log closed on Mon Jan 14 02:26:46 2019