! Started logfile: /vlbi/uf001/uvm//J1327+2210_X_a_dfm.log on Sun Jan 13 21:40:24 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1327+2210_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1327+2210_X_a_uvm.fits ! AN table 1: 73 integrations on 45 of 45 possible baselines. ! AN table 2: 15 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.51268 visibilities/baseline/integration-bin. ! Found source: J1327+2210 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 23532 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1327+2210_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 389 telescope corrections were flagged in sub-array 1. ! A total of 35 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 389 telescope corrections were flagged in sub-array 1. ! A total of 35 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 389 telescope corrections were flagged in sub-array 1. ! A total of 35 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 389 telescope corrections were flagged in sub-array 1. ! A total of 35 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 389 telescope corrections were flagged in sub-array 1. ! A total of 35 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 389 telescope corrections were flagged in sub-array 1. ! A total of 35 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 389 telescope corrections were flagged in sub-array 1. ! A total of 35 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 389 telescope corrections were flagged in sub-array 1. ! A total of 35 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 389 telescope corrections were flagged in sub-array 1. ! A total of 35 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 389 telescope corrections were flagged in sub-array 1. ! A total of 35 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 389 telescope corrections were flagged in sub-array 1. ! A total of 35 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 389 telescope corrections were flagged in sub-array 1. ! A total of 35 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.089677Jy sigma=22.233806 ! Fit after self-cal, rms=0.587659Jy sigma=12.027205 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7375 mas, bmaj=1.506 mas, bpa=-1.663 degrees ! Estimated noise=0.386974 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.316067 Jy ! Component: 100 - total flux cleaned = 0.385164 Jy ! Total flux subtracted in 100 components = 0.385164 Jy ! Clean residual min=-0.010482 max=0.020332 Jy/beam ! Clean residual mean=0.000008 rms=0.001877 Jy/beam ! Combined flux in latest and established models = 0.385164 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.385164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101141Jy sigma=2.025535 ! Fit after self-cal, rms=0.101130Jy sigma=2.025025 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0222701 Jy ! Component: 100 - total flux cleaned = 0.0340243 Jy ! Total flux subtracted in 100 components = 0.0340243 Jy ! Clean residual min=-0.009702 max=0.013651 Jy/beam ! Clean residual mean=0.000005 rms=0.001687 Jy/beam ! Combined flux in latest and established models = 0.419189 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 8 components and 0.419189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092355Jy sigma=1.853010 ! Fit after self-cal, rms=0.092299Jy sigma=1.852028 ! Inverting map ! Added new window around map position (-1.8, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131345 Jy ! Component: 100 - total flux cleaned = 0.0217651 Jy ! Total flux subtracted in 100 components = 0.0217651 Jy ! Clean residual min=-0.009797 max=0.011844 Jy/beam ! Clean residual mean=0.000004 rms=0.001588 Jy/beam ! Combined flux in latest and established models = 0.440954 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 19 components and 0.440954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088714Jy sigma=1.776337 ! Fit after self-cal, rms=0.088534Jy sigma=1.772614 ! Inverting map ! Added new window around map position (-0.6, -3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010917 Jy ! Component: 100 - total flux cleaned = 0.0179847 Jy ! Total flux subtracted in 100 components = 0.0179847 Jy ! Clean residual min=-0.009225 max=0.009400 Jy/beam ! Clean residual mean=0.000004 rms=0.001512 Jy/beam ! Combined flux in latest and established models = 0.458939 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.458939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086135Jy sigma=1.722944 ! Fit after self-cal, rms=0.086048Jy sigma=1.721370 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9931 mas, bmaj=1.885 mas, bpa=-2.317 degrees ! Estimated noise=0.252408 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147552 Jy ! Component: 100 - total flux cleaned = 0.025463 Jy ! Component: 150 - total flux cleaned = 0.0339433 Jy ! Component: 200 - total flux cleaned = 0.0407648 Jy ! Total flux subtracted in 200 components = 0.0407648 Jy ! Clean residual min=-0.010289 max=0.008247 Jy/beam ! Clean residual mean=0.000011 rms=0.001757 Jy/beam ! Combined flux in latest and established models = 0.499703 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 62 components and 0.499703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082505Jy sigma=1.647110 ! Fit after self-cal, rms=0.082454Jy sigma=1.646087 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9931 x 1.885 at -2.317 degrees (North through East) ! Clean map min=-0.0099404 max=0.41309 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 0.96 KP 1.01 ! LA 0.98 MK 1.03 NL 1.09 OV 0.91 ! PT 0.93 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 HN 0.94 KP 1.17 LA 0.98 ! MK 0.99 NL 1.02 OV 0.88 PT 1.13 ! SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 0.96 KP 1.01 ! LA 0.97 MK 1.01 NL 1.12 OV 0.92 ! PT 0.92 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 HN 0.96 KP 1.15 LA 0.97 ! MK 1.02 NL 1.03 OV 0.89 PT 1.14 ! SC 0.97 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 0.95 KP 1.00 ! LA 0.98 MK 1.05 NL 1.09 OV 0.90 ! PT 0.93 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 HN 0.94 KP 1.18 LA 0.96 ! MK 1.02 NL 1.03 OV 0.89 PT 1.13 ! SC 0.93 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.95 KP 1.02 ! LA 0.97 MK 1.03 NL 1.09 OV 0.92 ! PT 0.93 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 HN 0.95 KP 1.17 LA 0.96 ! MK 1.00 NL 1.04 OV 0.90 PT 1.14 ! SC 0.96 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 0.95 KP 1.00 ! LA 0.97 MK 1.03 NL 1.11 OV 0.91 ! PT 0.93 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 HN 0.95 KP 1.17 LA 0.97 ! MK 1.01 NL 1.05 OV 0.88 PT 1.12 ! SC 0.98 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 0.97 KP 1.01 ! LA 0.98 MK 1.01 NL 1.09 OV 0.90 ! PT 0.94 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 HN 0.96 KP 1.23 LA 0.96 ! MK 1.01 NL 1.03 OV 0.90 PT 1.15 ! SC 0.97 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.96 KP 1.03 ! LA 0.97 MK 1.02 NL 1.10 OV 0.91 ! PT 0.93 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 HN 0.95 KP 1.23 LA 0.99 ! MK 1.01 NL 1.03 OV 0.92 PT 1.14 ! SC 0.96 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 0.96 KP 1.01 ! LA 0.98 MK 1.05 NL 1.09 OV 0.90 ! PT 0.93 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 HN 0.94 KP 1.18 LA 0.97 ! MK 1.06 NL 1.02 OV 0.90 PT 1.12 ! SC 0.97 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.97 KP 1.01 ! LA 0.98 MK 1.02 NL 1.09 OV 0.90 ! PT 0.94 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 HN 0.99 KP 1.17 LA 0.97 ! MK 1.03 NL 1.04 OV 0.92 PT 1.12 ! SC 0.96 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.97 KP 1.01 ! LA 0.97 MK 1.04 NL 1.10 OV 0.93 ! PT 0.92 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 HN 0.99 KP 1.19 LA 0.97 ! MK 1.00 NL 1.04 OV 0.90 PT 1.15 ! SC 0.97 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 0.98 KP 1.02 ! LA 0.98 MK 1.03 NL 1.09 OV 0.92 ! PT 0.93 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 HN 0.97 KP 1.21 LA 0.97 ! MK 1.02 NL 1.03 OV 0.91 PT 1.14 ! SC 1.00 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.98 KP 0.99 ! LA 0.98 MK 1.04 NL 1.10 OV 0.92 ! PT 0.93 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 HN 0.96 KP 1.22 LA 0.99 ! MK 1.03 NL 1.02 OV 0.92 PT 1.12 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.082454Jy sigma=1.646087 ! Fit after self-cal, rms=0.077626Jy sigma=1.474593 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.994 mas, bmaj=1.891 mas, bpa=-1.983 degrees ! Estimated noise=0.251591 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00273257 Jy ! Component: 100 - total flux cleaned = -0.0040116 Jy ! Component: 150 - total flux cleaned = -0.00480314 Jy ! Component: 200 - total flux cleaned = -0.005363 Jy ! Total flux subtracted in 200 components = -0.005363 Jy ! Clean residual min=-0.006079 max=0.006344 Jy/beam ! Clean residual mean=0.000012 rms=0.001219 Jy/beam ! Combined flux in latest and established models = 0.49434 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 78 components and 0.49434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077114Jy sigma=1.462542 ! Fit after self-cal, rms=0.077136Jy sigma=1.462067 ! Inverting map ! Added new window around map position (-13.6, 6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00486932 Jy ! Component: 100 - total flux cleaned = 0.0053679 Jy ! Component: 150 - total flux cleaned = 0.00558255 Jy ! Component: 200 - total flux cleaned = 0.00549696 Jy ! Total flux subtracted in 200 components = 0.00549696 Jy ! Clean residual min=-0.005641 max=0.005806 Jy/beam ! Clean residual mean=0.000010 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.499837 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 99 components and 0.499837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076606Jy sigma=1.453900 ! Fit after self-cal, rms=0.076574Jy sigma=1.452992 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076574Jy sigma=1.452992 ! Fit after self-cal, rms=0.061107Jy sigma=1.112011 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9961 mas, bmaj=1.887 mas, bpa=-2.005 degrees ! Estimated noise=0.252783 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00294271 Jy ! Component: 100 - total flux cleaned = -0.00370896 Jy ! Component: 150 - total flux cleaned = -0.00442827 Jy ! Component: 200 - total flux cleaned = -0.00477495 Jy ! Total flux subtracted in 200 components = -0.00477495 Jy ! Clean residual min=-0.002156 max=0.002259 Jy/beam ! Clean residual mean=-0.000000 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.495062 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 111 components and 0.495062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060854Jy sigma=1.106208 ! Fit after self-cal, rms=0.060935Jy sigma=1.105735 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153693 Jy ! Component: 100 - total flux cleaned = 0.00165469 Jy ! Component: 150 - total flux cleaned = 0.0017638 Jy ! Component: 200 - total flux cleaned = 0.0018149 Jy ! Total flux subtracted in 200 components = 0.0018149 Jy ! Clean residual min=-0.002087 max=0.002049 Jy/beam ! Clean residual mean=-0.000001 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.496877 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 125 components and 0.496877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060819Jy sigma=1.103183 ! Fit after self-cal, rms=0.060814Jy sigma=1.103097 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060814Jy sigma=1.103097 ! Fit after self-cal, rms=0.060524Jy sigma=1.093732 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9949 mas, bmaj=1.887 mas, bpa=-2.022 degrees ! Estimated noise=0.252618 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00191122 Jy ! Component: 100 - total flux cleaned = -0.00292217 Jy ! Component: 150 - total flux cleaned = -0.00354728 Jy ! Component: 200 - total flux cleaned = -0.00374796 Jy ! Total flux subtracted in 200 components = -0.00374796 Jy ! Clean residual min=-0.001707 max=0.001853 Jy/beam ! Clean residual mean=-0.000002 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.493129 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 134 components and 0.493129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060404Jy sigma=1.090933 ! Fit after self-cal, rms=0.060401Jy sigma=1.090866 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.2, 23.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000863009 Jy ! Component: 100 - total flux cleaned = 0.00106088 Jy ! Component: 150 - total flux cleaned = 0.00124301 Jy ! Component: 200 - total flux cleaned = 0.00137046 Jy ! Total flux subtracted in 200 components = 0.00137046 Jy ! Clean residual min=-0.001613 max=0.001646 Jy/beam ! Clean residual mean=-0.000002 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.4945 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 152 components and 0.4945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060319Jy sigma=1.089114 ! Fit after self-cal, rms=0.060315Jy sigma=1.089059 ! Inverting map ! Added new window around map position (-5.6, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00018461 Jy ! Component: 100 - total flux cleaned = 0.000126896 Jy ! Component: 150 - total flux cleaned = 0.000125324 Jy ! Component: 200 - total flux cleaned = 8.64046e-05 Jy ! Total flux subtracted in 200 components = 8.64046e-05 Jy ! Clean residual min=-0.001504 max=0.001415 Jy/beam ! Clean residual mean=-0.000002 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.494586 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 170 components and 0.494586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060238Jy sigma=1.087467 ! Fit after self-cal, rms=0.060234Jy sigma=1.087417 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060234Jy sigma=1.087417 ! Fit after self-cal, rms=0.060221Jy sigma=1.086720 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.131 mas, bmaj=2.765 mas, bpa=-1.987 degrees ! Estimated noise=0.309949 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00096314 Jy ! Component: 100 - total flux cleaned = -0.000963746 Jy ! Component: 150 - total flux cleaned = -0.000800553 Jy ! Component: 200 - total flux cleaned = -0.000690207 Jy ! Total flux subtracted in 200 components = -0.000690207 Jy ! Clean residual min=-0.001716 max=0.001559 Jy/beam ! Clean residual mean=-0.000006 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.493896 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 191 components and 0.493896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060186Jy sigma=1.085917 ! Fit after self-cal, rms=0.060183Jy sigma=1.085887 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143316 Jy ! Component: 100 - total flux cleaned = 0.000273414 Jy ! Component: 150 - total flux cleaned = 0.000362745 Jy ! Component: 200 - total flux cleaned = 0.000390159 Jy ! Total flux subtracted in 200 components = 0.000390159 Jy ! Clean residual min=-0.001669 max=0.001536 Jy/beam ! Clean residual mean=-0.000006 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.494286 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 212 components and 0.494286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060166Jy sigma=1.085523 ! Fit after self-cal, rms=0.060165Jy sigma=1.085507 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9941 mas, bmaj=1.886 mas, bpa=-2.027 degrees ! Estimated noise=0.252581 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9941 x 1.886 at -2.027 degrees (North through East) ! Clean map min=-0.001376 max=0.41113 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7381 mas, bmaj=1.505 mas, bpa=-1.261 degrees ! Estimated noise=0.385678 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.314804 Jy ! Component: 100 - total flux cleaned = 0.384011 Jy ! Component: 150 - total flux cleaned = 0.408166 Jy ! Component: 200 - total flux cleaned = 0.422374 Jy ! Total flux subtracted in 200 components = 0.422374 Jy ! Clean residual min=-0.003036 max=0.008786 Jy/beam ! Clean residual mean=0.000002 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.422374 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.422374 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9941 mas, bmaj=1.886 mas, bpa=-2.027 degrees ! Estimated noise=0.252581 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169114 Jy ! Component: 100 - total flux cleaned = 0.0269101 Jy ! Component: 150 - total flux cleaned = 0.0338624 Jy ! Component: 200 - total flux cleaned = 0.0392006 Jy ! Total flux subtracted in 200 components = 0.0392006 Jy ! Clean residual min=-0.002053 max=0.003270 Jy/beam ! Clean residual mean=0.000003 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.461575 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 58 components and 0.461575 Jy ! Inverting map ! Added new window around map position (2.4, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00425648 Jy ! Component: 100 - total flux cleaned = 0.00773364 Jy ! Component: 150 - total flux cleaned = 0.0106671 Jy ! Component: 200 - total flux cleaned = 0.0132494 Jy ! Total flux subtracted in 200 components = 0.0132494 Jy ! Clean residual min=-0.001641 max=0.002084 Jy/beam ! Clean residual mean=0.000001 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.474824 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 100 components and 0.474824 Jy ! Inverting map ! Added new window around map position (-2.6, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238153 Jy ! Component: 100 - total flux cleaned = 0.00437362 Jy ! Component: 150 - total flux cleaned = 0.00594937 Jy ! Component: 200 - total flux cleaned = 0.00724541 Jy ! Total flux subtracted in 200 components = 0.00724541 Jy ! Clean residual min=-0.001488 max=0.001578 Jy/beam ! Clean residual mean=-0.000000 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.48207 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 127 components and 0.48207 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.131 mas, bmaj=2.765 mas, bpa=-1.987 degrees ! Estimated noise=0.309949 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252939 Jy ! Component: 100 - total flux cleaned = 0.00442654 Jy ! Component: 150 - total flux cleaned = 0.00558301 Jy ! Component: 200 - total flux cleaned = 0.00641594 Jy ! Total flux subtracted in 200 components = 0.00641594 Jy ! Clean residual min=-0.001802 max=0.001783 Jy/beam ! Clean residual mean=-0.000003 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.488486 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000636898 Jy ! Component: 100 - total flux cleaned = 0.00116246 Jy ! Component: 150 - total flux cleaned = 0.00148167 Jy ! Component: 200 - total flux cleaned = 0.00173897 Jy ! Total flux subtracted in 200 components = 0.00173897 Jy ! Clean residual min=-0.001689 max=0.001656 Jy/beam ! Clean residual mean=-0.000004 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.490225 Jy ! Adding 109 model components to the UV plane model. ! The established model now contains 220 components and 0.490225 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9941 mas, bmaj=1.886 mas, bpa=-2.027 degrees ! Estimated noise=0.252581 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000259633 Jy ! Component: 100 - total flux cleaned = -0.000263634 Jy ! Component: 150 - total flux cleaned = -0.000151845 Jy ! Component: 200 - total flux cleaned = -4.86721e-05 Jy ! Total flux subtracted in 200 components = -4.86721e-05 Jy ! Clean residual min=-0.001291 max=0.001406 Jy/beam ! Clean residual mean=-0.000002 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.490176 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 243 components and 0.490176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060063Jy sigma=1.083225 ! Fit after self-cal, rms=0.060048Jy sigma=1.082897 wmodel J1327+2210_X_a_map.mod ! Writing 243 model components to file: J1327+2210_X_a_map.mod wobs J1327+2210_X_a_uvs.fits ! Writing UV FITS file: J1327+2210_X_a_uvs.fits wwins J1327+2210_X_a_map.win ! wwins: Wrote 11 windows to J1327+2210_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000197651 Jy ! Component: 100 - total flux cleaned = 0.000198429 Jy ! Component: 150 - total flux cleaned = 0.000153478 Jy ! Component: 200 - total flux cleaned = 0.000109407 Jy ! Component: 250 - total flux cleaned = 8.73865e-05 Jy ! Component: 300 - total flux cleaned = 8.71766e-05 Jy ! Component: 350 - total flux cleaned = 0.000148647 Jy ! Component: 400 - total flux cleaned = 0.000188679 Jy ! Component: 450 - total flux cleaned = 0.000189021 Jy ! Component: 500 - total flux cleaned = 0.000267392 Jy ! Component: 550 - total flux cleaned = 0.000248542 Jy ! Component: 600 - total flux cleaned = 0.000305429 Jy ! Component: 650 - total flux cleaned = 0.000324193 Jy ! Component: 700 - total flux cleaned = 0.000361218 Jy ! Component: 750 - total flux cleaned = 0.000416152 Jy ! Component: 800 - total flux cleaned = 0.0004519 Jy ! Component: 850 - total flux cleaned = 0.000469658 Jy ! Component: 900 - total flux cleaned = 0.000487248 Jy ! Component: 950 - total flux cleaned = 0.000504779 Jy ! Component: 1000 - total flux cleaned = 0.000591838 Jy ! Component: 1050 - total flux cleaned = 0.000539985 Jy ! Component: 1100 - total flux cleaned = 0.000642957 Jy ! Component: 1150 - total flux cleaned = 0.000693988 Jy ! Component: 1200 - total flux cleaned = 0.000778161 Jy ! Component: 1250 - total flux cleaned = 0.000761341 Jy ! Component: 1300 - total flux cleaned = 0.000761505 Jy ! Component: 1350 - total flux cleaned = 0.000860508 Jy ! Component: 1400 - total flux cleaned = 0.000811215 Jy ! Component: 1450 - total flux cleaned = 0.000795099 Jy ! Component: 1500 - total flux cleaned = 0.000795083 Jy ! Component: 1550 - total flux cleaned = 0.000811087 Jy ! Component: 1600 - total flux cleaned = 0.000843024 Jy ! Component: 1650 - total flux cleaned = 0.000827327 Jy ! Component: 1700 - total flux cleaned = 0.000827347 Jy ! Component: 1750 - total flux cleaned = 0.000827477 Jy ! Component: 1800 - total flux cleaned = 0.000827667 Jy ! Component: 1850 - total flux cleaned = 0.000796786 Jy ! Component: 1900 - total flux cleaned = 0.00087356 Jy ! Component: 1950 - total flux cleaned = 0.000873494 Jy ! Component: 2000 - total flux cleaned = 0.000797708 Jy ! Component: 2050 - total flux cleaned = 0.000842916 Jy ! Component: 2100 - total flux cleaned = 0.00079796 Jy ! Component: 2150 - total flux cleaned = 0.00084274 Jy ! Component: 2200 - total flux cleaned = 0.000783386 Jy ! Component: 2250 - total flux cleaned = 0.00078332 Jy ! Component: 2300 - total flux cleaned = 0.000783445 Jy ! Component: 2350 - total flux cleaned = 0.000783432 Jy ! Component: 2400 - total flux cleaned = 0.000754528 Jy ! Component: 2450 - total flux cleaned = 0.000841003 Jy ! Component: 2500 - total flux cleaned = 0.000769231 Jy ! Component: 2550 - total flux cleaned = 0.000797739 Jy ! Component: 2600 - total flux cleaned = 0.000797847 Jy ! Component: 2650 - total flux cleaned = 0.000755459 Jy ! Component: 2700 - total flux cleaned = 0.000783623 Jy ! Component: 2750 - total flux cleaned = 0.000797706 Jy ! Component: 2800 - total flux cleaned = 0.000727931 Jy ! Component: 2850 - total flux cleaned = 0.000797477 Jy ! Component: 2900 - total flux cleaned = 0.000811327 Jy ! Component: 2950 - total flux cleaned = 0.000783841 Jy ! Component: 3000 - total flux cleaned = 0.000811287 Jy ! Component: 3050 - total flux cleaned = 0.000770379 Jy ! Component: 3100 - total flux cleaned = 0.00083831 Jy ! Component: 3150 - total flux cleaned = 0.000784267 Jy ! Component: 3200 - total flux cleaned = 0.00077075 Jy ! Component: 3250 - total flux cleaned = 0.000757469 Jy ! Component: 3300 - total flux cleaned = 0.000837609 Jy ! Component: 3350 - total flux cleaned = 0.000811012 Jy ! Component: 3400 - total flux cleaned = 0.000811048 Jy ! Component: 3450 - total flux cleaned = 0.000797923 Jy ! Component: 3500 - total flux cleaned = 0.000811152 Jy ! Component: 3550 - total flux cleaned = 0.000824228 Jy ! Component: 3600 - total flux cleaned = 0.000850308 Jy ! Component: 3650 - total flux cleaned = 0.000837355 Jy ! Component: 3700 - total flux cleaned = 0.00075973 Jy ! Component: 3750 - total flux cleaned = 0.000759732 Jy ! Component: 3800 - total flux cleaned = 0.00078541 Jy ! Component: 3850 - total flux cleaned = 0.000759783 Jy ! Component: 3900 - total flux cleaned = 0.000797916 Jy ! Component: 3950 - total flux cleaned = 0.000835991 Jy ! Component: 4000 - total flux cleaned = 0.000797997 Jy ! Component: 4050 - total flux cleaned = 0.00074756 Jy ! Total flux subtracted in 4096 components = 0.000760074 Jy ! Clean residual min=-0.000719 max=0.000766 Jy/beam ! Clean residual mean=-0.000002 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.490936 Jy keep ! Adding 360 model components to the UV plane model. ! The established model now contains 603 components and 0.490936 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1327+2210_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9941 x 1.886 at -2.027 degrees (North through East) ! Clean map min=-0.0012904 max=0.41216 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1327+2210_X_a_map.fits wmodel /vlbi/uf001/uvm//J1327+2210_X_a_map.mod ! Writing 603 model components to file: /vlbi/uf001/uvm//J1327+2210_X_a_map.mod wobs /vlbi/uf001/uvm//J1327+2210_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1327+2210_X_a_uvs.fits wwins /vlbi/uf001/uvm//J1327+2210_X_a_map.win ! wwins: Wrote 12 windows to /vlbi/uf001/uvm//J1327+2210_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.41216 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000230876 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.168049 0.168049 0.336097 0.672194 1.34439 2.68878 5.37755 10.7551 21.5102 43.0204 86.0408 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.412 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1785.2 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1327+2210_X_a_dfm.log closed on Sun Jan 13 21:40:30 2019