! Started logfile: /vlbi/uf001/uvm//J1326+0326_X_a_dfm.log on Sun Jan 13 21:39:57 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1326+0326_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1326+0326_X_a_uvm.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! AN table 2: 58 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.916118 visibilities/baseline/integration-bin. ! Found source: J1326+0326 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 53472 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1326+0326_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.002517Jy sigma=22.973084 ! Fit after self-cal, rms=0.964870Jy sigma=22.104985 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.737 mas, bmaj=1.74 mas, bpa=-4.524 degrees ! Estimated noise=0.254034 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.025163 Jy ! Component: 100 - total flux cleaned = 0.0321598 Jy ! Total flux subtracted in 100 components = 0.0321598 Jy ! Clean residual min=-0.002501 max=0.005971 Jy/beam ! Clean residual mean=-0.000003 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.0321598 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0321598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060151Jy sigma=1.286538 ! Fit after self-cal, rms=0.058750Jy sigma=1.252994 ! Inverting map ! Added new window around map position (1, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00689834 Jy ! Component: 100 - total flux cleaned = 0.0109412 Jy ! Total flux subtracted in 100 components = 0.0109412 Jy ! Clean residual min=-0.001935 max=0.004454 Jy/beam ! Clean residual mean=-0.000002 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.043101 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 20 components and 0.043101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057426Jy sigma=1.219456 ! Fit after self-cal, rms=0.057328Jy sigma=1.216539 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043341 Jy ! Component: 100 - total flux cleaned = 0.00663945 Jy ! Total flux subtracted in 100 components = 0.00663945 Jy ! Clean residual min=-0.001902 max=0.003354 Jy/beam ! Clean residual mean=-0.000002 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.0497405 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.0497405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056809Jy sigma=1.203670 ! Fit after self-cal, rms=0.056720Jy sigma=1.201292 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305514 Jy ! Component: 100 - total flux cleaned = 0.00452225 Jy ! Total flux subtracted in 100 components = 0.00452225 Jy ! Clean residual min=-0.001864 max=0.002259 Jy/beam ! Clean residual mean=-0.000001 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.0542627 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 28 components and 0.0542627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056476Jy sigma=1.195482 ! Fit after self-cal, rms=0.056419Jy sigma=1.194103 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9567 mas, bmaj=2.142 mas, bpa=-5.825 degrees ! Estimated noise=0.136506 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296618 Jy ! Component: 100 - total flux cleaned = 0.00428042 Jy ! Component: 150 - total flux cleaned = 0.00509607 Jy ! Component: 200 - total flux cleaned = 0.00548323 Jy ! Total flux subtracted in 200 components = 0.00548323 Jy ! Clean residual min=-0.001499 max=0.002160 Jy/beam ! Clean residual mean=-0.000002 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.059746 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 39 components and 0.059746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056274Jy sigma=1.190493 ! Fit after self-cal, rms=0.056225Jy sigma=1.189357 ! Inverting map ! Added new window around map position (2.8, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218916 Jy ! Component: 100 - total flux cleaned = 0.00296328 Jy ! Component: 150 - total flux cleaned = 0.00319779 Jy ! Component: 200 - total flux cleaned = 0.00332458 Jy ! Total flux subtracted in 200 components = 0.00332458 Jy ! Clean residual min=-0.001304 max=0.001334 Jy/beam ! Clean residual mean=-0.000001 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.0630705 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 60 components and 0.0630705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056134Jy sigma=1.186885 ! Fit after self-cal, rms=0.056089Jy sigma=1.186221 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9567 x 2.142 at -5.825 degrees (North through East) ! Clean map min=-0.0012173 max=0.035363 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.06 HN 1.08 KP 1.05 ! LA 1.10 MK 1.02 NL 1.14 OV 0.99 ! PT 0.90 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.00 HN 0.97 KP 0.92 ! LA 0.99 MK 0.97 NL 1.21 PT 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.09 HN 0.99 KP 1.01 ! LA 0.98 MK 1.09 NL 1.18 OV 1.00 ! PT 0.85 SC 1.10 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.96 HN 0.90 KP 0.98 ! LA 1.00 MK 1.04 NL 1.18 PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.99 HN 1.10 KP 1.08 ! LA 1.03 MK 0.97 NL 1.13 OV 0.94 ! PT 0.83 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.99 HN 0.95 KP 1.03 ! LA 0.99 MK 1.04 NL 1.11 PT 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 0.92 KP 1.08 ! LA 1.02 MK 1.05 NL 1.11 OV 0.96 ! PT 0.92 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 1.00 HN 0.87 KP 0.98 ! LA 0.94 MK 0.95 NL 1.20 PT 0.93 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.06 HN 0.98 KP 1.09 ! LA 1.01 MK 0.90 NL 1.19 OV 0.96 ! PT 0.81 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.96 HN 0.86 KP 0.99 ! LA 1.02 MK 1.02 NL 1.20 PT 0.91 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.99 HN 0.94 KP 1.06 ! LA 1.02 MK 0.92 NL 1.13 OV 0.97 ! PT 0.97 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.01 HN 0.97 KP 1.08 ! LA 0.97 MK 0.99 NL 1.10 PT 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.05 KP 1.10 ! LA 0.96 MK 0.99 NL 1.11 OV 1.07 ! PT 0.93 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.02 HN 0.83 KP 1.00 ! LA 1.02 MK 1.08 NL 1.10 PT 0.90 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 HN 0.98 KP 1.08 ! LA 1.01 MK 0.98 NL 1.17 OV 0.94 ! PT 0.91 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.02 HN 0.79 KP 1.05 ! LA 0.92 MK 0.92 NL 1.12 PT 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 0.96 KP 1.05 ! LA 1.07 MK 0.96 NL 1.09 OV 0.90 ! PT 0.92 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.99 HN 0.80 KP 1.11 ! LA 1.06 MK 0.96 NL 1.12 PT 0.85 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.95 HN 0.99 KP 1.02 ! LA 0.99 MK 0.86 NL 1.11 OV 0.94 ! PT 0.90 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 1.00 HN 0.73 KP 0.99 ! LA 1.04 MK 1.00 NL 1.09 PT 1.04 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 0.89 KP 1.10 ! LA 1.03 MK 1.00 NL 1.08 OV 0.92 ! PT 0.91 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.97 HN 0.71 KP 0.93 ! LA 1.13 MK 0.99 NL 1.16 PT 0.88 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 0.87 KP 1.08 ! LA 1.03 MK 0.93 NL 1.26 OV 0.95 ! PT 0.83 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.85 FD 0.88 HN 0.70 KP 0.94 ! LA 0.98 MK 0.86 NL 1.20 PT 0.93 ! ! ! Fit before self-cal, rms=0.056089Jy sigma=1.186221 ! Fit after self-cal, rms=0.054300Jy sigma=1.181083 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9438 mas, bmaj=2.149 mas, bpa=-6.174 degrees ! Estimated noise=0.136225 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000529868 Jy ! Component: 100 - total flux cleaned = 0.000502031 Jy ! Component: 150 - total flux cleaned = 0.000404998 Jy ! Component: 200 - total flux cleaned = 0.000305712 Jy ! Total flux subtracted in 200 components = 0.000305712 Jy ! Clean residual min=-0.000784 max=0.000872 Jy/beam ! Clean residual mean=-0.000000 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.0633762 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 0.0633762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054262Jy sigma=1.180317 ! Fit after self-cal, rms=0.054254Jy sigma=1.179117 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054254Jy sigma=1.179117 ! Fit after self-cal, rms=0.053912Jy sigma=1.176603 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9377 mas, bmaj=2.142 mas, bpa=-6.086 degrees ! Estimated noise=0.135407 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000424427 Jy ! Component: 100 - total flux cleaned = 0.00034975 Jy ! Component: 150 - total flux cleaned = 0.000254772 Jy ! Component: 200 - total flux cleaned = 0.00020739 Jy ! Total flux subtracted in 200 components = 0.00020739 Jy ! Clean residual min=-0.000682 max=0.000721 Jy/beam ! Clean residual mean=-0.000000 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.0635836 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 86 components and 0.0635836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053887Jy sigma=1.176158 ! Fit after self-cal, rms=0.053902Jy sigma=1.175618 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-40.4, 9.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000598764 Jy ! Component: 100 - total flux cleaned = 0.000659933 Jy ! Component: 150 - total flux cleaned = 0.00064235 Jy ! Component: 200 - total flux cleaned = 0.000611347 Jy ! Total flux subtracted in 200 components = 0.000611347 Jy ! Clean residual min=-0.000722 max=0.000682 Jy/beam ! Clean residual mean=-0.000000 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.064195 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 96 components and 0.064195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053884Jy sigma=1.175296 ! Fit after self-cal, rms=0.053876Jy sigma=1.175174 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053876Jy sigma=1.175174 ! Fit after self-cal, rms=0.053806Jy sigma=1.175011 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9347 mas, bmaj=2.138 mas, bpa=-6.022 degrees ! Estimated noise=0.134799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000412217 Jy ! Component: 100 - total flux cleaned = 0.000414343 Jy ! Component: 150 - total flux cleaned = 0.000398604 Jy ! Component: 200 - total flux cleaned = 0.000385112 Jy ! Total flux subtracted in 200 components = 0.000385112 Jy ! Clean residual min=-0.000725 max=0.000683 Jy/beam ! Clean residual mean=-0.000000 rms=0.000161 Jy/beam ! Combined flux in latest and established models = 0.0645801 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 102 components and 0.0645801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053793Jy sigma=1.174773 ! Fit after self-cal, rms=0.053803Jy sigma=1.174677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174443 Jy ! Component: 100 - total flux cleaned = 0.000157817 Jy ! Component: 150 - total flux cleaned = 0.000117846 Jy ! Component: 200 - total flux cleaned = 9.32628e-05 Jy ! Total flux subtracted in 200 components = 9.32628e-05 Jy ! Clean residual min=-0.000692 max=0.000677 Jy/beam ! Clean residual mean=-0.000000 rms=0.000160 Jy/beam ! Combined flux in latest and established models = 0.0646734 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 106 components and 0.0646734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053794Jy sigma=1.174533 ! Fit after self-cal, rms=0.053790Jy sigma=1.174438 ! Inverting map ! Added new window around map position (-30, 14.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000494263 Jy ! Component: 100 - total flux cleaned = 0.000621874 Jy ! Component: 150 - total flux cleaned = 0.00064995 Jy ! Component: 200 - total flux cleaned = 0.000662547 Jy ! Total flux subtracted in 200 components = 0.000662547 Jy ! Clean residual min=-0.000666 max=0.000633 Jy/beam ! Clean residual mean=0.000000 rms=0.000156 Jy/beam ! Combined flux in latest and established models = 0.0653359 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 119 components and 0.0653359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053779Jy sigma=1.174226 ! Fit after self-cal, rms=0.053777Jy sigma=1.174175 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053777Jy sigma=1.174175 ! Fit after self-cal, rms=0.053704Jy sigma=1.174109 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.074 mas, bmaj=3.174 mas, bpa=-5.654 degrees ! Estimated noise=0.170218 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165925 Jy ! Component: 100 - total flux cleaned = 0.000134947 Jy ! Component: 150 - total flux cleaned = 0.000112246 Jy ! Component: 200 - total flux cleaned = 9.26969e-05 Jy ! Total flux subtracted in 200 components = 9.26969e-05 Jy ! Clean residual min=-0.000730 max=0.000617 Jy/beam ! Clean residual mean=-0.000000 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.0654286 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 135 components and 0.0654286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053699Jy sigma=1.174018 ! Fit after self-cal, rms=0.053696Jy sigma=1.173858 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000130999 Jy ! Component: 100 - total flux cleaned = 0.000131047 Jy ! Component: 150 - total flux cleaned = 0.000122066 Jy ! Component: 200 - total flux cleaned = 8.93685e-05 Jy ! Total flux subtracted in 200 components = 8.93685e-05 Jy ! Clean residual min=-0.000716 max=0.000606 Jy/beam ! Clean residual mean=0.000000 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.065518 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 146 components and 0.065518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053693Jy sigma=1.173812 ! Fit after self-cal, rms=0.053692Jy sigma=1.173769 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.933 mas, bmaj=2.136 mas, bpa=-5.985 degrees ! Estimated noise=0.134416 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.933 x 2.136 at -5.985 degrees (North through East) ! Clean map min=-0.00084616 max=0.034292 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.723 mas, bmaj=1.746 mas, bpa=-4.817 degrees ! Estimated noise=0.244144 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0265863 Jy ! Component: 100 - total flux cleaned = 0.0395206 Jy ! Component: 150 - total flux cleaned = 0.0465934 Jy ! Component: 200 - total flux cleaned = 0.050606 Jy ! Total flux subtracted in 200 components = 0.050606 Jy ! Clean residual min=-0.001560 max=0.002122 Jy/beam ! Clean residual mean=-0.000001 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.0506059 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0506059 Jy ! Inverting map and beam ! Estimated beam: bmin=0.933 mas, bmaj=2.136 mas, bpa=-5.985 degrees ! Estimated noise=0.134416 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0044453 Jy ! Component: 100 - total flux cleaned = 0.00720274 Jy ! Component: 150 - total flux cleaned = 0.00913658 Jy ! Component: 200 - total flux cleaned = 0.0105915 Jy ! Total flux subtracted in 200 components = 0.0105915 Jy ! Clean residual min=-0.000800 max=0.001087 Jy/beam ! Clean residual mean=-0.000001 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.0611975 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 47 components and 0.0611975 Jy ! Inverting map ! Added new window around map position (-7.8, 8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121636 Jy ! Component: 100 - total flux cleaned = 0.00215023 Jy ! Component: 150 - total flux cleaned = 0.0027397 Jy ! Component: 200 - total flux cleaned = 0.00305498 Jy ! Total flux subtracted in 200 components = 0.00305498 Jy ! Clean residual min=-0.000693 max=0.000693 Jy/beam ! Clean residual mean=-0.000001 rms=0.000170 Jy/beam ! Combined flux in latest and established models = 0.0642525 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 68 components and 0.0642525 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.074 mas, bmaj=3.174 mas, bpa=-5.654 degrees ! Estimated noise=0.170218 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000741704 Jy ! Component: 100 - total flux cleaned = 0.000853593 Jy ! Component: 150 - total flux cleaned = 0.00090732 Jy ! Component: 200 - total flux cleaned = 0.000939858 Jy ! Total flux subtracted in 200 components = 0.000939858 Jy ! Clean residual min=-0.000683 max=0.000641 Jy/beam ! Clean residual mean=-0.000001 rms=0.000177 Jy/beam ! Combined flux in latest and established models = 0.0651923 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.33813e-05 Jy ! Component: 100 - total flux cleaned = 0.000138745 Jy ! Component: 150 - total flux cleaned = 0.000185714 Jy ! Component: 200 - total flux cleaned = 0.000217933 Jy ! Total flux subtracted in 200 components = 0.000217933 Jy ! Clean residual min=-0.000681 max=0.000630 Jy/beam ! Clean residual mean=-0.000001 rms=0.000172 Jy/beam ! Combined flux in latest and established models = 0.0654103 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 106 components and 0.0654103 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.933 mas, bmaj=2.136 mas, bpa=-5.985 degrees ! Estimated noise=0.134416 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.03915e-05 Jy ! Component: 100 - total flux cleaned = -3.12175e-05 Jy ! Component: 150 - total flux cleaned = -4.92596e-05 Jy ! Component: 200 - total flux cleaned = -8.17715e-05 Jy ! Total flux subtracted in 200 components = -8.17715e-05 Jy ! Clean residual min=-0.000640 max=0.000637 Jy/beam ! Clean residual mean=-0.000000 rms=0.000154 Jy/beam ! Combined flux in latest and established models = 0.0653285 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 124 components and 0.0653285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053692Jy sigma=1.173863 ! Fit after self-cal, rms=0.053680Jy sigma=1.173598 wmodel J1326+0326_X_a_map.mod ! Writing 124 model components to file: J1326+0326_X_a_map.mod wobs J1326+0326_X_a_uvs.fits ! Writing UV FITS file: J1326+0326_X_a_uvs.fits wwins J1326+0326_X_a_map.win ! wwins: Wrote 6 windows to J1326+0326_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -9.39843e-05 Jy ! Component: 100 - total flux cleaned = -0.000217806 Jy ! Component: 150 - total flux cleaned = -0.000271884 Jy ! Component: 200 - total flux cleaned = -0.000303305 Jy ! Component: 250 - total flux cleaned = -0.000303407 Jy ! Component: 300 - total flux cleaned = -0.000293355 Jy ! Component: 350 - total flux cleaned = -0.00028351 Jy ! Component: 400 - total flux cleaned = -0.000283523 Jy ! Component: 450 - total flux cleaned = -0.00030232 Jy ! Component: 500 - total flux cleaned = -0.000293034 Jy ! Component: 550 - total flux cleaned = -0.00030226 Jy ! Component: 600 - total flux cleaned = -0.000302278 Jy ! Component: 650 - total flux cleaned = -0.000302333 Jy ! Component: 700 - total flux cleaned = -0.000320113 Jy ! Component: 750 - total flux cleaned = -0.000337569 Jy ! Component: 800 - total flux cleaned = -0.000346365 Jy ! Component: 850 - total flux cleaned = -0.000363459 Jy ! Component: 900 - total flux cleaned = -0.000371859 Jy ! Component: 950 - total flux cleaned = -0.000355071 Jy ! Component: 1000 - total flux cleaned = -0.000371896 Jy ! Component: 1050 - total flux cleaned = -0.000396652 Jy ! Component: 1100 - total flux cleaned = -0.000388442 Jy ! Component: 1150 - total flux cleaned = -0.000412713 Jy ! Component: 1200 - total flux cleaned = -0.000444844 Jy ! Component: 1250 - total flux cleaned = -0.000452775 Jy ! Component: 1300 - total flux cleaned = -0.00048431 Jy ! Component: 1350 - total flux cleaned = -0.000460851 Jy ! Component: 1400 - total flux cleaned = -0.000507511 Jy ! Component: 1450 - total flux cleaned = -0.000522785 Jy ! Component: 1500 - total flux cleaned = -0.000538078 Jy ! Component: 1550 - total flux cleaned = -0.000568363 Jy ! Component: 1600 - total flux cleaned = -0.00056077 Jy ! Component: 1650 - total flux cleaned = -0.000597978 Jy ! Component: 1700 - total flux cleaned = -0.000605294 Jy ! Component: 1750 - total flux cleaned = -0.000612579 Jy ! Component: 1800 - total flux cleaned = -0.000641651 Jy ! Component: 1850 - total flux cleaned = -0.00062718 Jy ! Component: 1900 - total flux cleaned = -0.000641598 Jy ! Component: 1950 - total flux cleaned = -0.00064873 Jy ! Component: 2000 - total flux cleaned = -0.000606189 Jy ! Component: 2050 - total flux cleaned = -0.000655629 Jy ! Component: 2100 - total flux cleaned = -0.000606603 Jy ! Component: 2150 - total flux cleaned = -0.000620494 Jy ! Component: 2200 - total flux cleaned = -0.000599712 Jy ! Component: 2250 - total flux cleaned = -0.000613456 Jy ! Component: 2300 - total flux cleaned = -0.000579334 Jy ! Component: 2350 - total flux cleaned = -0.000572501 Jy ! Component: 2400 - total flux cleaned = -0.000606228 Jy ! Component: 2450 - total flux cleaned = -0.000586116 Jy ! Component: 2500 - total flux cleaned = -0.000572718 Jy ! Component: 2550 - total flux cleaned = -0.000566094 Jy ! Component: 2600 - total flux cleaned = -0.000579249 Jy ! Component: 2650 - total flux cleaned = -0.000546427 Jy ! Component: 2700 - total flux cleaned = -0.000526861 Jy ! Component: 2750 - total flux cleaned = -0.000539805 Jy ! Component: 2800 - total flux cleaned = -0.000546229 Jy ! Component: 2850 - total flux cleaned = -0.000514124 Jy ! Component: 2900 - total flux cleaned = -0.000520541 Jy ! Component: 2950 - total flux cleaned = -0.000501407 Jy ! Component: 3000 - total flux cleaned = -0.000495081 Jy ! Component: 3050 - total flux cleaned = -0.000495094 Jy ! Component: 3100 - total flux cleaned = -0.00050135 Jy ! Component: 3150 - total flux cleaned = -0.000476525 Jy ! Component: 3200 - total flux cleaned = -0.000476594 Jy ! Component: 3250 - total flux cleaned = -0.000488905 Jy ! Component: 3300 - total flux cleaned = -0.000482853 Jy ! Component: 3350 - total flux cleaned = -0.000440144 Jy ! Component: 3400 - total flux cleaned = -0.000434069 Jy ! Component: 3450 - total flux cleaned = -0.000470319 Jy ! Component: 3500 - total flux cleaned = -0.000464333 Jy ! Component: 3550 - total flux cleaned = -0.000452393 Jy ! Component: 3600 - total flux cleaned = -0.000452441 Jy ! Component: 3650 - total flux cleaned = -0.000452423 Jy ! Component: 3700 - total flux cleaned = -0.000428773 Jy ! Component: 3750 - total flux cleaned = -0.000399425 Jy ! Component: 3800 - total flux cleaned = -0.000399432 Jy ! Component: 3850 - total flux cleaned = -0.00041108 Jy ! Component: 3900 - total flux cleaned = -0.000422679 Jy ! Component: 3950 - total flux cleaned = -0.00039383 Jy ! Component: 4000 - total flux cleaned = -0.000382351 Jy ! Component: 4050 - total flux cleaned = -0.000370929 Jy ! Total flux subtracted in 4096 components = -0.000393699 Jy ! Clean residual min=-0.000284 max=0.000354 Jy/beam ! Clean residual mean=-0.000000 rms=0.000102 Jy/beam ! Combined flux in latest and established models = 0.0649348 Jy keep ! Adding 343 model components to the UV plane model. ! The established model now contains 466 components and 0.0649348 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1326+0326_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.933 x 2.136 at -5.985 degrees (North through East) ! Clean map min=-0.000539 max=0.034242 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1326+0326_X_a_map.fits wmodel /vlbi/uf001/uvm//J1326+0326_X_a_map.mod ! Writing 466 model components to file: /vlbi/uf001/uvm//J1326+0326_X_a_map.mod wobs /vlbi/uf001/uvm//J1326+0326_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1326+0326_X_a_uvs.fits wwins /vlbi/uf001/uvm//J1326+0326_X_a_map.win ! wwins: Wrote 7 windows to /vlbi/uf001/uvm//J1326+0326_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0342421 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000101287 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.887388 0.887388 1.77478 3.54955 7.0991 14.1982 28.3964 56.7928 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.034 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 338.07 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1326+0326_X_a_dfm.log closed on Sun Jan 13 21:40:04 2019