! Started logfile: /vlbi/uf001/uva//J1323-4452_S_dfm.log on Mon Jan 14 02:22:11 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1323-4452_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1323-4452_S_uva.fits ! AN table 1: 73 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.762231 visibilities/baseline/integration-bin. ! Found source: J1323-4452 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 4674 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1323-4452_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.196351Jy sigma=13.390161 ! Fit after self-cal, rms=0.767485Jy sigma=9.147461 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.228 mas, bmaj=8.33 mas, bpa=-11.51 degrees ! Estimated noise=1.70379 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.264371 Jy ! Component: 100 - total flux cleaned = 0.431927 Jy ! Total flux subtracted in 100 components = 0.431927 Jy ! Clean residual min=-0.052580 max=0.096210 Jy/beam ! Clean residual mean=-0.001198 rms=0.024824 Jy/beam ! Combined flux in latest and established models = 0.431927 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 55 components and 0.431927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.441815Jy sigma=4.072977 ! Fit after self-cal, rms=0.440697Jy sigma=4.060724 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.966 mas, bmaj=9.802 mas, bpa=-8.74 degrees ! Estimated noise=0.908375 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.152485 Jy ! Component: 100 - total flux cleaned = 0.229557 Jy ! Component: 150 - total flux cleaned = 0.268643 Jy ! Component: 200 - total flux cleaned = 0.288512 Jy ! Total flux subtracted in 200 components = 0.288512 Jy ! Clean residual min=-0.076067 max=0.139504 Jy/beam ! Clean residual mean=-0.001645 rms=0.030640 Jy/beam ! Combined flux in latest and established models = 0.720439 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 67 components and 0.720439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.374302Jy sigma=3.443847 ! Fit after self-cal, rms=0.374098Jy sigma=3.440766 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.966 x 9.802 at -8.74 degrees (North through East) ! Clean map min=-0.077043 max=0.23461 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 KP 1.54 LA 0.61 MK 1.15 ! NL 2.79 OV 0.99 PT 0.91 SC 2.57 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 KP 1.40 LA 0.67 MK 1.22 ! NL 2.91 OV 0.92 PT 0.98 SC 2.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 KP 1.39 LA 0.68 MK 1.13 ! NL 2.82 OV 0.93 PT 1.02 SC 1.60 ! ! ! Fit before self-cal, rms=0.374098Jy sigma=3.440766 ! Fit after self-cal, rms=0.352834Jy sigma=2.792638 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=10.99 mas, bpa=-11.22 degrees ! Estimated noise=1.06081 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125253 Jy ! Component: 100 - total flux cleaned = 0.0162676 Jy ! Component: 150 - total flux cleaned = 0.0168661 Jy ! Component: 200 - total flux cleaned = 0.0173821 Jy ! Total flux subtracted in 200 components = 0.0173821 Jy ! Clean residual min=-0.059927 max=0.102951 Jy/beam ! Clean residual mean=0.000715 rms=0.026321 Jy/beam ! Combined flux in latest and established models = 0.737821 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 77 components and 0.737821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.351748Jy sigma=2.794046 ! Fit after self-cal, rms=0.359539Jy sigma=2.747608 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.359539Jy sigma=2.747608 ! Fit after self-cal, rms=0.408083Jy sigma=2.532995 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=11.48 mas, bpa=-10.96 degrees ! Estimated noise=1.04036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105735 Jy ! Component: 100 - total flux cleaned = 0.0112276 Jy ! Component: 150 - total flux cleaned = 0.0115875 Jy ! Component: 200 - total flux cleaned = 0.0118846 Jy ! Total flux subtracted in 200 components = 0.0118846 Jy ! Clean residual min=-0.056351 max=0.079428 Jy/beam ! Clean residual mean=0.000674 rms=0.021755 Jy/beam ! Combined flux in latest and established models = 0.749705 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 85 components and 0.749705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.407609Jy sigma=2.533002 ! Fit after self-cal, rms=0.408506Jy sigma=2.531156 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000852509 Jy ! Component: 100 - total flux cleaned = -0.000704306 Jy ! Component: 150 - total flux cleaned = -0.000464938 Jy ! Component: 200 - total flux cleaned = -0.000365705 Jy ! Total flux subtracted in 200 components = -0.000365705 Jy ! Clean residual min=-0.056392 max=0.078418 Jy/beam ! Clean residual mean=0.000671 rms=0.021763 Jy/beam ! Combined flux in latest and established models = 0.749339 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 90 components and 0.74934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.408549Jy sigma=2.530559 ! Fit after self-cal, rms=0.408576Jy sigma=2.530299 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.408576Jy sigma=2.530299 ! Fit after self-cal, rms=0.438084Jy sigma=2.527508 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.191 mas, bmaj=12.03 mas, bpa=-10.89 degrees ! Estimated noise=1.04997 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00970654 Jy ! Component: 100 - total flux cleaned = 0.0114864 Jy ! Component: 150 - total flux cleaned = 0.0117841 Jy ! Component: 200 - total flux cleaned = 0.0120321 Jy ! Total flux subtracted in 200 components = 0.0120321 Jy ! Clean residual min=-0.057213 max=0.078762 Jy/beam ! Clean residual mean=0.000677 rms=0.021952 Jy/beam ! Combined flux in latest and established models = 0.761372 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 91 components and 0.761372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.437743Jy sigma=2.528520 ! Fit after self-cal, rms=0.437865Jy sigma=2.528252 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000388943 Jy ! Component: 100 - total flux cleaned = -0.000262405 Jy ! Component: 150 - total flux cleaned = -0.00015332 Jy ! Component: 200 - total flux cleaned = -5.23816e-05 Jy ! Total flux subtracted in 200 components = -5.23816e-05 Jy ! Clean residual min=-0.057237 max=0.078783 Jy/beam ! Clean residual mean=0.000677 rms=0.021955 Jy/beam ! Combined flux in latest and established models = 0.761319 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 93 components and 0.761319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.437937Jy sigma=2.528085 ! Fit after self-cal, rms=0.437941Jy sigma=2.527902 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.437941Jy sigma=2.527902 ! Fit after self-cal, rms=0.468555Jy sigma=2.525393 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.63 mas, bmaj=35.26 mas, bpa=-3.681 degrees ! Estimated noise=1.33997 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108522 Jy ! Component: 100 - total flux cleaned = 0.010864 Jy ! Component: 150 - total flux cleaned = 0.0108685 Jy ! Component: 200 - total flux cleaned = 0.0107071 Jy ! Total flux subtracted in 200 components = 0.0107071 Jy ! Clean residual min=-0.090920 max=0.134435 Jy/beam ! Clean residual mean=0.001226 rms=0.039396 Jy/beam ! Combined flux in latest and established models = 0.772026 Jy selfcal ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 94 components and 0.772026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.469211Jy sigma=2.532586 ! Fit after self-cal, rms=0.469116Jy sigma=2.529162 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000548374 Jy ! Component: 100 - total flux cleaned = 0.000329393 Jy ! Component: 150 - total flux cleaned = 0.000156528 Jy ! Component: 200 - total flux cleaned = 1.1018e-05 Jy ! Total flux subtracted in 200 components = 1.1018e-05 Jy ! Clean residual min=-0.090766 max=0.134661 Jy/beam ! Clean residual mean=0.001230 rms=0.039405 Jy/beam ! Combined flux in latest and established models = 0.772037 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 94 components and 0.772037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.469844Jy sigma=2.533757 ! Fit after self-cal, rms=0.469696Jy sigma=2.532389 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=12.54 mas, bpa=-10.64 degrees ! Estimated noise=1.06473 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.195 x 12.54 at -10.64 degrees (North through East) ! Clean map min=-0.055832 max=0.29531 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.608 mas, bmaj=9.993 mas, bpa=-13.25 degrees ! Estimated noise=2.29346 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.342666 Jy ! Component: 100 - total flux cleaned = 0.532643 Jy ! Component: 150 - total flux cleaned = 0.642909 Jy ! Component: 200 - total flux cleaned = 0.70747 Jy ! Total flux subtracted in 200 components = 0.70747 Jy ! Clean residual min=-0.049333 max=0.063942 Jy/beam ! Clean residual mean=0.000009 rms=0.017746 Jy/beam ! Combined flux in latest and established models = 0.70747 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 66 model components to the UV plane model. ! The established model now contains 66 components and 0.70747 Jy ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=12.54 mas, bpa=-10.64 degrees ! Estimated noise=1.06473 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0343857 Jy ! Component: 100 - total flux cleaned = 0.0495336 Jy ! Component: 150 - total flux cleaned = 0.0565024 Jy ! Component: 200 - total flux cleaned = 0.0576699 Jy ! Total flux subtracted in 200 components = 0.0576699 Jy ! Clean residual min=-0.052940 max=0.080768 Jy/beam ! Clean residual mean=0.000641 rms=0.022259 Jy/beam ! Combined flux in latest and established models = 0.76514 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 81 components and 0.76514 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.63 mas, bmaj=35.26 mas, bpa=-3.681 degrees ! Estimated noise=1.33997 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182914 Jy ! Component: 100 - total flux cleaned = 0.00185082 Jy ! Component: 150 - total flux cleaned = 0.00186278 Jy ! Component: 200 - total flux cleaned = 0.00187111 Jy ! Total flux subtracted in 200 components = 0.00187111 Jy ! Clean residual min=-0.090772 max=0.134088 Jy/beam ! Clean residual mean=0.001180 rms=0.039426 Jy/beam ! Combined flux in latest and established models = 0.767011 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.48677e-06 Jy ! Component: 100 - total flux cleaned = 7.45878e-06 Jy ! Component: 150 - total flux cleaned = -0.000196815 Jy ! Component: 200 - total flux cleaned = -0.00028436 Jy ! Total flux subtracted in 200 components = -0.00028436 Jy ! Clean residual min=-0.090499 max=0.133676 Jy/beam ! Clean residual mean=0.001178 rms=0.039439 Jy/beam ! Combined flux in latest and established models = 0.766726 Jy ! Adding 3 model components to the UV plane model. ! The established model now contains 83 components and 0.766726 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=12.54 mas, bpa=-10.64 degrees ! Estimated noise=1.06473 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151665 Jy ! Component: 100 - total flux cleaned = 0.0014912 Jy ! Component: 150 - total flux cleaned = 0.00127029 Jy ! Component: 200 - total flux cleaned = 0.00126617 Jy ! Total flux subtracted in 200 components = 0.00126617 Jy ! Clean residual min=-0.053337 max=0.080383 Jy/beam ! Clean residual mean=0.000656 rms=0.022269 Jy/beam ! Combined flux in latest and established models = 0.767993 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 90 components and 0.767993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.474019Jy sigma=2.532762 ! Fit after self-cal, rms=0.473402Jy sigma=2.529009 wmodel J1323-4452_S_map.mod ! Writing 90 model components to file: J1323-4452_S_map.mod wobs J1323-4452_S_uvs.fits ! Writing UV FITS file: J1323-4452_S_uvs.fits wwins J1323-4452_S_map.win ! wwins: Wrote 1 windows to J1323-4452_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0355511 Jy ! Component: 100 - total flux cleaned = 0.0654082 Jy ! Component: 150 - total flux cleaned = 0.0920954 Jy ! Component: 200 - total flux cleaned = 0.113492 Jy ! Component: 250 - total flux cleaned = 0.132554 Jy ! Component: 300 - total flux cleaned = 0.148059 Jy ! Component: 350 - total flux cleaned = 0.164474 Jy ! Component: 400 - total flux cleaned = 0.177841 Jy ! Component: 450 - total flux cleaned = 0.191424 Jy ! Component: 500 - total flux cleaned = 0.203034 Jy ! Component: 550 - total flux cleaned = 0.210742 Jy ! Component: 600 - total flux cleaned = 0.217495 Jy ! Component: 650 - total flux cleaned = 0.223361 Jy ! Component: 700 - total flux cleaned = 0.229652 Jy ! Component: 750 - total flux cleaned = 0.232703 Jy ! Component: 800 - total flux cleaned = 0.236849 Jy ! Component: 850 - total flux cleaned = 0.239722 Jy ! Component: 900 - total flux cleaned = 0.244163 Jy ! Component: 950 - total flux cleaned = 0.245784 Jy ! Component: 1000 - total flux cleaned = 0.24788 Jy ! Component: 1050 - total flux cleaned = 0.248894 Jy ! Component: 1100 - total flux cleaned = 0.250383 Jy ! Component: 1150 - total flux cleaned = 0.250867 Jy ! Component: 1200 - total flux cleaned = 0.252272 Jy ! Component: 1250 - total flux cleaned = 0.253193 Jy ! Component: 1300 - total flux cleaned = 0.254533 Jy ! Component: 1350 - total flux cleaned = 0.257172 Jy ! Component: 1400 - total flux cleaned = 0.258037 Jy ! Component: 1450 - total flux cleaned = 0.260579 Jy ! Component: 1500 - total flux cleaned = 0.263892 Jy ! Component: 1550 - total flux cleaned = 0.266339 Jy ! Component: 1600 - total flux cleaned = 0.269536 Jy ! Component: 1650 - total flux cleaned = 0.272275 Jy ! Component: 1700 - total flux cleaned = 0.275353 Jy ! Component: 1750 - total flux cleaned = 0.277997 Jy ! Component: 1800 - total flux cleaned = 0.280222 Jy ! Component: 1850 - total flux cleaned = 0.283151 Jy ! Component: 1900 - total flux cleaned = 0.285307 Jy ! Component: 1950 - total flux cleaned = 0.287774 Jy ! Component: 2000 - total flux cleaned = 0.290204 Jy ! Component: 2050 - total flux cleaned = 0.293276 Jy ! Component: 2100 - total flux cleaned = 0.294951 Jy ! Component: 2150 - total flux cleaned = 0.297603 Jy ! Component: 2200 - total flux cleaned = 0.300856 Jy ! Component: 2250 - total flux cleaned = 0.303101 Jy ! Component: 2300 - total flux cleaned = 0.306581 Jy ! Component: 2350 - total flux cleaned = 0.30814 Jy ! Component: 2400 - total flux cleaned = 0.310296 Jy ! Component: 2450 - total flux cleaned = 0.313036 Jy ! Component: 2500 - total flux cleaned = 0.314837 Jy ! Component: 2550 - total flux cleaned = 0.317796 Jy ! Component: 2600 - total flux cleaned = 0.320418 Jy ! Component: 2650 - total flux cleaned = 0.322145 Jy ! Component: 2700 - total flux cleaned = 0.323855 Jy ! Component: 2750 - total flux cleaned = 0.325819 Jy ! Component: 2800 - total flux cleaned = 0.327207 Jy ! Component: 2850 - total flux cleaned = 0.329125 Jy ! Component: 2900 - total flux cleaned = 0.330753 Jy ! Component: 2950 - total flux cleaned = 0.332359 Jy ! Component: 3000 - total flux cleaned = 0.333152 Jy ! Component: 3050 - total flux cleaned = 0.333412 Jy ! Component: 3100 - total flux cleaned = 0.33393 Jy ! Component: 3150 - total flux cleaned = 0.3347 Jy ! Component: 3200 - total flux cleaned = 0.335463 Jy ! Component: 3250 - total flux cleaned = 0.336468 Jy ! Component: 3300 - total flux cleaned = 0.336716 Jy ! Component: 3350 - total flux cleaned = 0.336964 Jy ! Component: 3400 - total flux cleaned = 0.33745 Jy ! Component: 3450 - total flux cleaned = 0.33721 Jy ! Component: 3500 - total flux cleaned = 0.33745 Jy ! Component: 3550 - total flux cleaned = 0.337689 Jy ! Component: 3600 - total flux cleaned = 0.338157 Jy ! Component: 3650 - total flux cleaned = 0.33839 Jy ! Component: 3700 - total flux cleaned = 0.33862 Jy ! Component: 3750 - total flux cleaned = 0.338618 Jy ! Component: 3800 - total flux cleaned = 0.339521 Jy ! Component: 3850 - total flux cleaned = 0.33907 Jy ! Component: 3900 - total flux cleaned = 0.339517 Jy ! Component: 3950 - total flux cleaned = 0.339519 Jy ! Component: 4000 - total flux cleaned = 0.339958 Jy ! Component: 4050 - total flux cleaned = 0.340392 Jy ! Total flux subtracted in 4096 components = 0.340176 Jy ! Clean residual min=-0.011934 max=0.011932 Jy/beam ! Clean residual mean=0.000177 rms=0.005108 Jy/beam ! Combined flux in latest and established models = 1.10817 Jy keep ! Adding 642 model components to the UV plane model. ! The established model now contains 732 components and 1.10817 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1323-4452_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.195 x 12.54 at -10.64 degrees (North through East) ! Clean map min=-0.039624 max=0.34142 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1323-4452_S_map.fits wmodel /vlbi/uf001/uva//J1323-4452_S_map.mod ! Writing 732 model components to file: /vlbi/uf001/uva//J1323-4452_S_map.mod wobs /vlbi/uf001/uva//J1323-4452_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1323-4452_S_uvs.fits wwins /vlbi/uf001/uva//J1323-4452_S_map.win ! wwins: Wrote 2 windows to /vlbi/uf001/uva//J1323-4452_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.341417 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00459026 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.03342 4.03342 8.06684 16.1337 32.2674 64.5347 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0137 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.341 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 74.378 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1323-4452_S_dfm.log closed on Mon Jan 14 02:22:15 2019