! Started logfile: /vlbi/uf001/uva//J1323-3038_X_dfm.log on Mon Jan 14 02:21:42 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J1323-3038_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1323-3038_X_uva.fits
! AN table 1: 38 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.985965 visibilities/baseline/integration-bin.
! Found source: J1323-3038
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20232 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1323-3038_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014813Jy  sigma=17.841862
! Fit after  self-cal, rms=0.868376Jy  sigma=14.902821
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6464 mas, bmaj=1.705 mas, bpa=-7.201 degrees
! Estimated noise=0.682285 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103844 Jy
! Component: 100  -  total flux cleaned = 0.13626 Jy
! Total flux subtracted in 100 components = 0.13626 Jy
! Clean residual min=-0.011106 max=0.021686 Jy/beam
! Clean residual mean=-0.000006 rms=0.002668 Jy/beam
! Combined flux in latest and established models = 0.13626 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.13626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102203Jy  sigma=1.615502
! Fit after  self-cal, rms=0.102010Jy  sigma=1.612409
! Inverting map 
! Added new window around map position (-1.6, 0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0195622 Jy
! Component: 100  -  total flux cleaned = 0.0300702 Jy
! Total flux subtracted in 100 components = 0.0300702 Jy
! Clean residual min=-0.010139 max=0.018280 Jy/beam
! Clean residual mean=-0.000003 rms=0.002230 Jy/beam
! Combined flux in latest and established models = 0.16633 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 19 components and 0.16633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098475Jy  sigma=1.515124
! Fit after  self-cal, rms=0.098155Jy  sigma=1.505039
! Inverting map 
! Added new window around map position (1.6, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0134014 Jy
! Component: 100  -  total flux cleaned = 0.0208594 Jy
! Total flux subtracted in 100 components = 0.0208594 Jy
! Clean residual min=-0.009006 max=0.010955 Jy/beam
! Clean residual mean=-0.000002 rms=0.001938 Jy/beam
! Combined flux in latest and established models = 0.18719 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 27 components and 0.18719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096658Jy  sigma=1.466426
! Fit after  self-cal, rms=0.096608Jy  sigma=1.465281
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8752 mas, bmaj=2.222 mas, bpa=-6.312 degrees
! Estimated noise=0.309735 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (14, -25.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120671 Jy
! Component: 100  -  total flux cleaned = 0.0173132 Jy
! Component: 150  -  total flux cleaned = 0.0189627 Jy
! Component: 200  -  total flux cleaned = 0.0196694 Jy
! Total flux subtracted in 200 components = 0.0196694 Jy
! Clean residual min=-0.008532 max=0.010711 Jy/beam
! Clean residual mean=0.000001 rms=0.002160 Jy/beam
! Combined flux in latest and established models = 0.206859 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 53 components and 0.206859 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095339Jy  sigma=1.429079
! Fit after  self-cal, rms=0.095181Jy  sigma=1.425848
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8752 x 2.222 at -6.312 degrees (North through East)
! Clean map  min=-0.0082155  max=0.13215 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00     HN        1.01     KP        1.07     
!   LA        0.77     MK        0.95     NL        1.06     OV        1.14     
!   PT        1.04     SC        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.02     HN        1.04     KP        1.06     
!   LA        0.79     MK        0.98     NL        1.09     OV        1.09     
!   PT        1.03     SC        0.92     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.05     HN        1.08     KP        1.07     
!   LA        0.81     MK        0.93     NL        1.10     OV        1.09     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.02     HN        1.06     KP        1.06     
!   LA        0.79     MK        0.96     NL        1.06     OV        1.08     
!   PT        0.99     SC        0.91     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.10     KP        1.07     
!   LA        0.81     MK        0.97     NL        1.06     OV        1.08     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.06     HN        1.11     KP        1.06     
!   LA        0.75     MK        0.98     NL        1.11     OV        1.04     
!   PT        1.03     SC        0.93     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        1.12     KP        1.07     
!   LA        0.80     MK        0.91     NL        1.05     OV        1.10     
!   PT        1.04     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        1.01     HN        1.10     KP        1.08     
!   LA        0.78     MK        0.95     NL        1.05     OV        1.03     
!   PT        1.01     SC        0.91     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.08     HN        1.01     KP        1.04     
!   LA        0.79     MK        0.91     NL        1.09     OV        1.13     
!   PT        1.00     SC        0.92     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.10     KP        1.12     
!   LA        0.79     MK        0.96     NL        1.08     OV        1.10     
!   PT        1.02     SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.97     HN        1.01     KP        1.06     
!   LA        0.76     MK        0.98     NL        1.07     OV        1.09     
!   PT        1.04     SC        0.90     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.05     HN        1.03     KP        1.13     
!   LA        0.79     MK        0.91     NL        1.07     OV        1.11     
!   PT        1.03     SC        0.89     
! 
! 
! Fit before self-cal, rms=0.095181Jy  sigma=1.425848
! Fit after  self-cal, rms=0.093605Jy  sigma=1.358491
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8626 mas, bmaj=2.181 mas, bpa=-6.192 degrees
! Estimated noise=0.307573 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00181323 Jy
! Component: 100  -  total flux cleaned = -0.00263351 Jy
! Component: 150  -  total flux cleaned = -0.00322757 Jy
! Component: 200  -  total flux cleaned = -0.00357636 Jy
! Total flux subtracted in 200 components = -0.00357636 Jy
! Clean residual min=-0.005071 max=0.006944 Jy/beam
! Clean residual mean=-0.000011 rms=0.001450 Jy/beam
! Combined flux in latest and established models = 0.203283 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 70 components and 0.203283 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093303Jy  sigma=1.354232
! Fit after  self-cal, rms=0.093647Jy  sigma=1.352679
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093647Jy  sigma=1.352679
! Fit after  self-cal, rms=0.112059Jy  sigma=1.307067
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8732 mas, bmaj=2.234 mas, bpa=-6.19 degrees
! Estimated noise=0.315338 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00350883 Jy
! Component: 100  -  total flux cleaned = -0.00449542 Jy
! Component: 150  -  total flux cleaned = -0.00503388 Jy
! Component: 200  -  total flux cleaned = -0.00563632 Jy
! Total flux subtracted in 200 components = -0.00563632 Jy
! Clean residual min=-0.003646 max=0.003065 Jy/beam
! Clean residual mean=-0.000004 rms=0.000783 Jy/beam
! Combined flux in latest and established models = 0.197647 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 83 components and 0.197647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111827Jy  sigma=1.302999
! Fit after  self-cal, rms=0.112085Jy  sigma=1.302199
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000788361 Jy
! Component: 100  -  total flux cleaned = -0.00127717 Jy
! Component: 150  -  total flux cleaned = -0.00154297 Jy
! Component: 200  -  total flux cleaned = -0.00173733 Jy
! Total flux subtracted in 200 components = -0.00173733 Jy
! Clean residual min=-0.003357 max=0.003224 Jy/beam
! Clean residual mean=-0.000004 rms=0.000771 Jy/beam
! Combined flux in latest and established models = 0.195909 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 90 components and 0.195909 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.112027Jy  sigma=1.300974
! Fit after  self-cal, rms=0.112029Jy  sigma=1.300884
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.112029Jy  sigma=1.300884
! Fit after  self-cal, rms=0.117602Jy  sigma=1.298982
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8743 mas, bmaj=2.254 mas, bpa=-5.854 degrees
! Estimated noise=0.316958 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00267843 Jy
! Component: 100  -  total flux cleaned = -0.00339761 Jy
! Component: 150  -  total flux cleaned = -0.0037974 Jy
! Component: 200  -  total flux cleaned = -0.00420653 Jy
! Total flux subtracted in 200 components = -0.00420653 Jy
! Clean residual min=-0.003025 max=0.002630 Jy/beam
! Clean residual mean=-0.000002 rms=0.000669 Jy/beam
! Combined flux in latest and established models = 0.191703 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 99 components and 0.191703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.117480Jy  sigma=1.296831
! Fit after  self-cal, rms=0.117531Jy  sigma=1.296718
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000544938 Jy
! Component: 100  -  total flux cleaned = -0.000884801 Jy
! Component: 150  -  total flux cleaned = -0.00097403 Jy
! Component: 200  -  total flux cleaned = -0.00105914 Jy
! Total flux subtracted in 200 components = -0.00105914 Jy
! Clean residual min=-0.002863 max=0.002758 Jy/beam
! Clean residual mean=-0.000003 rms=0.000661 Jy/beam
! Combined flux in latest and established models = 0.190644 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 104 components and 0.190644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.117494Jy  sigma=1.295934
! Fit after  self-cal, rms=0.117495Jy  sigma=1.295891
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.117495Jy  sigma=1.295891
! Fit after  self-cal, rms=0.121271Jy  sigma=1.294909
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.343 mas, bmaj=5.888 mas, bpa=-1.474 degrees
! Estimated noise=0.373792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00198463 Jy
! Component: 100  -  total flux cleaned = -0.00262918 Jy
! Component: 150  -  total flux cleaned = -0.00270981 Jy
! Component: 200  -  total flux cleaned = -0.00282028 Jy
! Total flux subtracted in 200 components = -0.00282028 Jy
! Clean residual min=-0.002604 max=0.002759 Jy/beam
! Clean residual mean=-0.000002 rms=0.000769 Jy/beam
! Combined flux in latest and established models = 0.187823 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 114 components and 0.187823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.121228Jy  sigma=1.294077
! Fit after  self-cal, rms=0.121259Jy  sigma=1.293995
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000189203 Jy
! Component: 100  -  total flux cleaned = -0.000252287 Jy
! Component: 150  -  total flux cleaned = -0.000252515 Jy
! Component: 200  -  total flux cleaned = -0.000252738 Jy
! Total flux subtracted in 200 components = -0.000252738 Jy
! Clean residual min=-0.002545 max=0.002843 Jy/beam
! Clean residual mean=-0.000002 rms=0.000760 Jy/beam
! Combined flux in latest and established models = 0.187571 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 123 components and 0.187571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.121252Jy  sigma=1.293697
! Fit after  self-cal, rms=0.121247Jy  sigma=1.293673
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8753 mas, bmaj=2.272 mas, bpa=-5.559 degrees
! Estimated noise=0.31775 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8753 x 2.272 at -5.559 degrees (North through East)
! Clean map  min=-0.0027476  max=0.13855 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6434 mas, bmaj=1.738 mas, bpa=-6.087 degrees
! Estimated noise=0.712184 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107415 Jy
! Component: 100  -  total flux cleaned = 0.140168 Jy
! Component: 150  -  total flux cleaned = 0.156148 Jy
! Component: 200  -  total flux cleaned = 0.165945 Jy
! Total flux subtracted in 200 components = 0.165945 Jy
! Clean residual min=-0.005587 max=0.007126 Jy/beam
! Clean residual mean=-0.000003 rms=0.001226 Jy/beam
! Combined flux in latest and established models = 0.165945 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.165945 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8753 mas, bmaj=2.272 mas, bpa=-5.559 degrees
! Estimated noise=0.31775 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00856165 Jy
! Component: 100  -  total flux cleaned = 0.0134027 Jy
! Component: 150  -  total flux cleaned = 0.0165848 Jy
! Component: 200  -  total flux cleaned = 0.0185494 Jy
! Total flux subtracted in 200 components = 0.0185494 Jy
! Clean residual min=-0.002745 max=0.002688 Jy/beam
! Clean residual mean=-0.000002 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 0.184495 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 39 components and 0.184495 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.343 mas, bmaj=5.888 mas, bpa=-1.474 degrees
! Estimated noise=0.373792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00175771 Jy
! Component: 100  -  total flux cleaned = 0.00231994 Jy
! Component: 150  -  total flux cleaned = 0.00277319 Jy
! Component: 200  -  total flux cleaned = 0.00317939 Jy
! Total flux subtracted in 200 components = 0.00317939 Jy
! Clean residual min=-0.002540 max=0.002861 Jy/beam
! Clean residual mean=-0.000002 rms=0.000769 Jy/beam
! Combined flux in latest and established models = 0.187674 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000294895 Jy
! Component: 100  -  total flux cleaned = 0.000460096 Jy
! Component: 150  -  total flux cleaned = 0.000555325 Jy
! Component: 200  -  total flux cleaned = 0.000597491 Jy
! Total flux subtracted in 200 components = 0.000597491 Jy
! Clean residual min=-0.002390 max=0.002761 Jy/beam
! Clean residual mean=-0.000002 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.188271 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 65 components and 0.188271 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8753 mas, bmaj=2.272 mas, bpa=-5.559 degrees
! Estimated noise=0.31775 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000345454 Jy
! Component: 100  -  total flux cleaned = -0.000408489 Jy
! Component: 150  -  total flux cleaned = -0.000411845 Jy
! Component: 200  -  total flux cleaned = -0.000463575 Jy
! Total flux subtracted in 200 components = -0.000463575 Jy
! Clean residual min=-0.002375 max=0.002378 Jy/beam
! Clean residual mean=-0.000001 rms=0.000593 Jy/beam
! Combined flux in latest and established models = 0.187808 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 74 components and 0.187808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.121313Jy  sigma=1.294288
! Fit after  self-cal, rms=0.121265Jy  sigma=1.294030
wmodel J1323-3038_X_map.mod
! Writing 74 model components to file: J1323-3038_X_map.mod
wobs   J1323-3038_X_uvs.fits
! Writing UV FITS file: J1323-3038_X_uvs.fits
wwins  J1323-3038_X_map.win
! wwins: Wrote 4 windows to J1323-3038_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 1.53281e-05 Jy
! Component: 100  -  total flux cleaned = -0.000148592 Jy
! Component: 150  -  total flux cleaned = -0.000460457 Jy
! Component: 200  -  total flux cleaned = -0.000797795 Jy
! Component: 250  -  total flux cleaned = -0.000979597 Jy
! Component: 300  -  total flux cleaned = -0.00112014 Jy
! Component: 350  -  total flux cleaned = -0.0011886 Jy
! Component: 400  -  total flux cleaned = -0.00135715 Jy
! Component: 450  -  total flux cleaned = -0.00139029 Jy
! Component: 500  -  total flux cleaned = -0.00142293 Jy
! Component: 550  -  total flux cleaned = -0.00151788 Jy
! Component: 600  -  total flux cleaned = -0.00151741 Jy
! Component: 650  -  total flux cleaned = -0.00154824 Jy
! Component: 700  -  total flux cleaned = -0.00163819 Jy
! Component: 750  -  total flux cleaned = -0.0016376 Jy
! Component: 800  -  total flux cleaned = -0.00166686 Jy
! Component: 850  -  total flux cleaned = -0.00178221 Jy
! Component: 900  -  total flux cleaned = -0.00183903 Jy
! Component: 950  -  total flux cleaned = -0.00192291 Jy
! Component: 1000  -  total flux cleaned = -0.0019774 Jy
! Component: 1050  -  total flux cleaned = -0.0019773 Jy
! Component: 1100  -  total flux cleaned = -0.00203073 Jy
! Component: 1150  -  total flux cleaned = -0.00205677 Jy
! Component: 1200  -  total flux cleaned = -0.00213516 Jy
! Component: 1250  -  total flux cleaned = -0.00216013 Jy
! Component: 1300  -  total flux cleaned = -0.00223657 Jy
! Component: 1350  -  total flux cleaned = -0.00226221 Jy
! Component: 1400  -  total flux cleaned = -0.00233667 Jy
! Component: 1450  -  total flux cleaned = -0.00238569 Jy
! Component: 1500  -  total flux cleaned = -0.00241004 Jy
! Component: 1550  -  total flux cleaned = -0.00245772 Jy
! Component: 1600  -  total flux cleaned = -0.00243445 Jy
! Component: 1650  -  total flux cleaned = -0.0024817 Jy
! Component: 1700  -  total flux cleaned = -0.00250494 Jy
! Component: 1750  -  total flux cleaned = -0.00264273 Jy
! Component: 1800  -  total flux cleaned = -0.00266582 Jy
! Component: 1850  -  total flux cleaned = -0.00280078 Jy
! Component: 1900  -  total flux cleaned = -0.00288966 Jy
! Component: 1950  -  total flux cleaned = -0.00295574 Jy
! Component: 2000  -  total flux cleaned = -0.00299971 Jy
! Component: 2050  -  total flux cleaned = -0.00319465 Jy
! Component: 2100  -  total flux cleaned = -0.00323736 Jy
! Component: 2150  -  total flux cleaned = -0.00332207 Jy
! Component: 2200  -  total flux cleaned = -0.00342723 Jy
! Component: 2250  -  total flux cleaned = -0.00346858 Jy
! Component: 2300  -  total flux cleaned = -0.00351014 Jy
! Component: 2350  -  total flux cleaned = -0.00363288 Jy
! Component: 2400  -  total flux cleaned = -0.00367345 Jy
! Component: 2450  -  total flux cleaned = -0.0035928 Jy
! Component: 2500  -  total flux cleaned = -0.00373293 Jy
! Component: 2550  -  total flux cleaned = -0.00369335 Jy
! Component: 2600  -  total flux cleaned = -0.00373299 Jy
! Component: 2650  -  total flux cleaned = -0.00379166 Jy
! Component: 2700  -  total flux cleaned = -0.00377222 Jy
! Component: 2750  -  total flux cleaned = -0.00373386 Jy
! Component: 2800  -  total flux cleaned = -0.0037912 Jy
! Component: 2850  -  total flux cleaned = -0.00381005 Jy
! Component: 2900  -  total flux cleaned = -0.00386637 Jy
! Component: 2950  -  total flux cleaned = -0.00388494 Jy
! Component: 3000  -  total flux cleaned = -0.00392179 Jy
! Component: 3050  -  total flux cleaned = -0.00394018 Jy
! Component: 3100  -  total flux cleaned = -0.00403167 Jy
! Component: 3150  -  total flux cleaned = -0.0040132 Jy
! Component: 3200  -  total flux cleaned = -0.00406723 Jy
! Component: 3250  -  total flux cleaned = -0.00406726 Jy
! Component: 3300  -  total flux cleaned = -0.00412039 Jy
! Component: 3350  -  total flux cleaned = -0.00419105 Jy
! Component: 3400  -  total flux cleaned = -0.00422623 Jy
! Component: 3450  -  total flux cleaned = -0.00433089 Jy
! Component: 3500  -  total flux cleaned = -0.00445209 Jy
! Component: 3550  -  total flux cleaned = -0.0045036 Jy
! Component: 3600  -  total flux cleaned = -0.00453782 Jy
! Component: 3650  -  total flux cleaned = -0.00469077 Jy
! Component: 3700  -  total flux cleaned = -0.00475844 Jy
! Component: 3750  -  total flux cleaned = -0.00487606 Jy
! Component: 3800  -  total flux cleaned = -0.00485928 Jy
! Component: 3850  -  total flux cleaned = -0.00500889 Jy
! Component: 3900  -  total flux cleaned = -0.00505836 Jy
! Component: 3950  -  total flux cleaned = -0.00512393 Jy
! Component: 4000  -  total flux cleaned = -0.00515649 Jy
! Component: 4050  -  total flux cleaned = -0.00517282 Jy
! Total flux subtracted in 4096 components = -0.00523735 Jy
! Clean residual min=-0.000920 max=0.000839 Jy/beam
! Clean residual mean=-0.000001 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.18257 Jy
keep
! Adding 283 model components to the UV plane model.
! The established model now contains 357 components and 0.182571 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1323-3038_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8753 x 2.272 at -5.559 degrees (North through East)
! Clean map  min=-0.0018706  max=0.13929 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1323-3038_X_map.fits
wmodel /vlbi/uf001/uva//J1323-3038_X_map.mod
! Writing 357 model components to file: /vlbi/uf001/uva//J1323-3038_X_map.mod
wobs   /vlbi/uf001/uva//J1323-3038_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1323-3038_X_uvs.fits
wwins  /vlbi/uf001/uva//J1323-3038_X_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J1323-3038_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.139295 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000273354 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.588726 0.588726 1.17745 2.3549 4.70981 9.41961 18.8392 37.6785 75.3569
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.139 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  509.575 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1323-3038_X_dfm.log closed on Mon Jan 14 02:21:48 2019