! Started logfile: /vlbi/uf001/uva//J1319+1039_S_dfm.log on Mon Jan 14 02:18:48 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1319+1039_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1319+1039_S_uva.fits
! AN table 1: 72 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.873148 visibilities/baseline/integration-bin.
! Found source: J1319+1039
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 8487 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1319+1039_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.020191Jy  sigma=21.184968
! Fit after  self-cal, rms=0.857429Jy  sigma=17.851953
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.174 mas, bmaj=6.606 mas, bpa=0.5108 degrees
! Estimated noise=0.472907 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.106488 Jy
! Component: 100  -  total flux cleaned = 0.146118 Jy
! Total flux subtracted in 100 components = 0.146118 Jy
! Clean residual min=-0.006558 max=0.018252 Jy/beam
! Clean residual mean=-0.000055 rms=0.001983 Jy/beam
! Combined flux in latest and established models = 0.146118 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.146118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072667Jy  sigma=1.408768
! Fit after  self-cal, rms=0.072001Jy  sigma=1.395086
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0219504 Jy
! Component: 100  -  total flux cleaned = 0.0334395 Jy
! Total flux subtracted in 100 components = 0.0334395 Jy
! Clean residual min=-0.004214 max=0.005843 Jy/beam
! Clean residual mean=-0.000024 rms=0.001069 Jy/beam
! Combined flux in latest and established models = 0.179558 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 28 components and 0.179558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064200Jy  sigma=1.227721
! Fit after  self-cal, rms=0.064025Jy  sigma=1.223739
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00779137 Jy
! Component: 100  -  total flux cleaned = 0.0124003 Jy
! Total flux subtracted in 100 components = 0.0124003 Jy
! Clean residual min=-0.003604 max=0.003741 Jy/beam
! Clean residual mean=-0.000012 rms=0.000899 Jy/beam
! Combined flux in latest and established models = 0.191958 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 35 components and 0.191958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062814Jy  sigma=1.200002
! Fit after  self-cal, rms=0.062784Jy  sigma=1.199230
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.717 mas, bmaj=7.489 mas, bpa=-0.1434 degrees
! Estimated noise=0.377751 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00418506 Jy
! Component: 100  -  total flux cleaned = 0.0064194 Jy
! Component: 150  -  total flux cleaned = 0.00751032 Jy
! Component: 200  -  total flux cleaned = 0.0077649 Jy
! Total flux subtracted in 200 components = 0.0077649 Jy
! Clean residual min=-0.002925 max=0.003034 Jy/beam
! Clean residual mean=-0.000010 rms=0.000771 Jy/beam
! Combined flux in latest and established models = 0.199723 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 42 components and 0.199723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062441Jy  sigma=1.194149
! Fit after  self-cal, rms=0.062433Jy  sigma=1.193984
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.717 x 7.489 at -0.1434 degrees (North through East)
! Clean map  min=-0.0029389  max=0.14024 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.97     KP        1.02     
!   LA        0.99     MK        1.06     NL        1.06     OV        0.99     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        1.00     KP        1.02     
!   LA        0.98     MK        1.03     NL        1.09     OV        0.99     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.98     HN        1.00     KP        1.03     
!   LA        0.97     MK        1.01     NL        1.08     OV        0.99     
!   PT        0.94     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.062433Jy  sigma=1.193984
! Fit after  self-cal, rms=0.061865Jy  sigma=1.183797
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.746 mas, bmaj=7.531 mas, bpa=-0.01106 degrees
! Estimated noise=0.380331 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000733289 Jy
! Component: 100  -  total flux cleaned = -0.000592641 Jy
! Component: 150  -  total flux cleaned = -0.00058958 Jy
! Component: 200  -  total flux cleaned = -0.000616278 Jy
! Total flux subtracted in 200 components = -0.000616278 Jy
! Clean residual min=-0.002702 max=0.002585 Jy/beam
! Clean residual mean=-0.000003 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.199107 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 47 components and 0.199107 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061825Jy  sigma=1.182960
! Fit after  self-cal, rms=0.061816Jy  sigma=1.182714
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061816Jy  sigma=1.182714
! Fit after  self-cal, rms=0.060614Jy  sigma=1.168184
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.727 mas, bmaj=7.462 mas, bpa=-0.6592 degrees
! Estimated noise=0.377404 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000425086 Jy
! Component: 100  -  total flux cleaned = 0.000322926 Jy
! Component: 150  -  total flux cleaned = 0.000207422 Jy
! Component: 200  -  total flux cleaned = 8.28549e-05 Jy
! Total flux subtracted in 200 components = 8.28549e-05 Jy
! Clean residual min=-0.001707 max=0.001631 Jy/beam
! Clean residual mean=-0.000001 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.19919 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 53 components and 0.19919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060582Jy  sigma=1.167478
! Fit after  self-cal, rms=0.060586Jy  sigma=1.167292
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.82585e-05 Jy
! Component: 100  -  total flux cleaned = -0.000157898 Jy
! Component: 150  -  total flux cleaned = -0.000235438 Jy
! Component: 200  -  total flux cleaned = -0.000270952 Jy
! Total flux subtracted in 200 components = -0.000270952 Jy
! Clean residual min=-0.001697 max=0.001623 Jy/beam
! Clean residual mean=-0.000002 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.198919 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 54 components and 0.198919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060569Jy  sigma=1.166957
! Fit after  self-cal, rms=0.060567Jy  sigma=1.166870
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060567Jy  sigma=1.166870
! Fit after  self-cal, rms=0.060448Jy  sigma=1.166736
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.72 mas, bmaj=7.444 mas, bpa=-0.8353 degrees
! Estimated noise=0.376483 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.60395e-05 Jy
! Component: 100  -  total flux cleaned = -3.10709e-05 Jy
! Component: 150  -  total flux cleaned = -9.71586e-05 Jy
! Component: 200  -  total flux cleaned = -0.000126176 Jy
! Total flux subtracted in 200 components = -0.000126176 Jy
! Clean residual min=-0.001663 max=0.001589 Jy/beam
! Clean residual mean=-0.000001 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.198793 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 57 components and 0.198793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060436Jy  sigma=1.166479
! Fit after  self-cal, rms=0.060436Jy  sigma=1.166413
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.86655e-05 Jy
! Component: 100  -  total flux cleaned = -8.23019e-05 Jy
! Component: 150  -  total flux cleaned = -9.46966e-05 Jy
! Component: 200  -  total flux cleaned = -0.00010664 Jy
! Total flux subtracted in 200 components = -0.00010664 Jy
! Clean residual min=-0.001654 max=0.001597 Jy/beam
! Clean residual mean=-0.000001 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.198686 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 62 components and 0.198686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060428Jy  sigma=1.166250
! Fit after  self-cal, rms=0.060427Jy  sigma=1.166192
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060427Jy  sigma=1.166192
! Fit after  self-cal, rms=0.060401Jy  sigma=1.166181
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.379 mas, bmaj=10.84 mas, bpa=-1.951 degrees
! Estimated noise=0.463828 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000619461 Jy
! Component: 100  -  total flux cleaned = -0.000719946 Jy
! Component: 150  -  total flux cleaned = -0.000733534 Jy
! Component: 200  -  total flux cleaned = -0.000733645 Jy
! Total flux subtracted in 200 components = -0.000733645 Jy
! Clean residual min=-0.001917 max=0.001634 Jy/beam
! Clean residual mean=-0.000005 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.197952 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 69 components and 0.197952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060399Jy  sigma=1.166119
! Fit after  self-cal, rms=0.060399Jy  sigma=1.166089
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.65021e-05 Jy
! Component: 100  -  total flux cleaned = -3.14018e-05 Jy
! Component: 150  -  total flux cleaned = -4.98021e-05 Jy
! Component: 200  -  total flux cleaned = -5.98449e-05 Jy
! Total flux subtracted in 200 components = -5.98449e-05 Jy
! Clean residual min=-0.001923 max=0.001635 Jy/beam
! Clean residual mean=-0.000005 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.197892 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 71 components and 0.197892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060396Jy  sigma=1.166038
! Fit after  self-cal, rms=0.060396Jy  sigma=1.166011
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.718 mas, bmaj=7.441 mas, bpa=-0.8608 degrees
! Estimated noise=0.376264 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.718 x 7.441 at -0.8608 degrees (North through East)
! Clean map  min=-0.0016586  max=0.13933 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.17 mas, bmaj=6.546 mas, bpa=-0.3585 degrees
! Estimated noise=0.472191 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107903 Jy
! Component: 100  -  total flux cleaned = 0.150573 Jy
! Component: 150  -  total flux cleaned = 0.171877 Jy
! Component: 200  -  total flux cleaned = 0.182835 Jy
! Total flux subtracted in 200 components = 0.182835 Jy
! Clean residual min=-0.002801 max=0.005290 Jy/beam
! Clean residual mean=-0.000015 rms=0.000775 Jy/beam
! Combined flux in latest and established models = 0.182835 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.182835 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.718 mas, bmaj=7.441 mas, bpa=-0.8608 degrees
! Estimated noise=0.376264 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00725078 Jy
! Component: 100  -  total flux cleaned = 0.0110295 Jy
! Component: 150  -  total flux cleaned = 0.0130792 Jy
! Component: 200  -  total flux cleaned = 0.014229 Jy
! Total flux subtracted in 200 components = 0.014229 Jy
! Clean residual min=-0.001618 max=0.001706 Jy/beam
! Clean residual mean=-0.000003 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.197064 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 42 components and 0.197064 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.379 mas, bmaj=10.84 mas, bpa=-1.951 degrees
! Estimated noise=0.463828 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000536293 Jy
! Component: 100  -  total flux cleaned = 0.000711995 Jy
! Component: 150  -  total flux cleaned = 0.000743233 Jy
! Component: 200  -  total flux cleaned = 0.000765604 Jy
! Total flux subtracted in 200 components = 0.000765604 Jy
! Clean residual min=-0.001906 max=0.001612 Jy/beam
! Clean residual mean=-0.000005 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.197829 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.55863e-05 Jy
! Component: 100  -  total flux cleaned = 2.90314e-05 Jy
! Component: 150  -  total flux cleaned = 3.2068e-05 Jy
! Component: 200  -  total flux cleaned = 2.89315e-05 Jy
! Total flux subtracted in 200 components = 2.89315e-05 Jy
! Clean residual min=-0.001907 max=0.001614 Jy/beam
! Clean residual mean=-0.000005 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.197858 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 53 components and 0.197858 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.718 mas, bmaj=7.441 mas, bpa=-0.8608 degrees
! Estimated noise=0.376264 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.04624e-05 Jy
! Component: 100  -  total flux cleaned = 9.46047e-05 Jy
! Component: 150  -  total flux cleaned = 9.40586e-05 Jy
! Component: 200  -  total flux cleaned = 0.000126253 Jy
! Total flux subtracted in 200 components = 0.000126253 Jy
! Clean residual min=-0.001618 max=0.001653 Jy/beam
! Clean residual mean=-0.000002 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.197985 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 59 components and 0.197985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060398Jy  sigma=1.166031
! Fit after  self-cal, rms=0.060396Jy  sigma=1.165981
wmodel J1319+1039_S_map.mod
! Writing 59 model components to file: J1319+1039_S_map.mod
wobs   J1319+1039_S_uvs.fits
! Writing UV FITS file: J1319+1039_S_uvs.fits
wwins  J1319+1039_S_map.win
! wwins: Wrote 1 windows to J1319+1039_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 8.9911e-05 Jy
! Component: 100  -  total flux cleaned = 0.000116743 Jy
! Component: 150  -  total flux cleaned = 0.000116851 Jy
! Component: 200  -  total flux cleaned = 6.79115e-05 Jy
! Component: 250  -  total flux cleaned = 2.00089e-05 Jy
! Component: 300  -  total flux cleaned = 6.64838e-05 Jy
! Component: 350  -  total flux cleaned = 4.36876e-05 Jy
! Component: 400  -  total flux cleaned = 0.000133613 Jy
! Component: 450  -  total flux cleaned = 0.000221147 Jy
! Component: 500  -  total flux cleaned = 0.000306375 Jy
! Component: 550  -  total flux cleaned = 0.000285043 Jy
! Component: 600  -  total flux cleaned = 0.000347339 Jy
! Component: 650  -  total flux cleaned = 0.000388415 Jy
! Component: 700  -  total flux cleaned = 0.000509227 Jy
! Component: 750  -  total flux cleaned = 0.000548652 Jy
! Component: 800  -  total flux cleaned = 0.000626417 Jy
! Component: 850  -  total flux cleaned = 0.000703071 Jy
! Component: 900  -  total flux cleaned = 0.000759618 Jy
! Component: 950  -  total flux cleaned = 0.000796799 Jy
! Component: 1000  -  total flux cleaned = 0.000852375 Jy
! Component: 1050  -  total flux cleaned = 0.000943408 Jy
! Component: 1100  -  total flux cleaned = 0.000961672 Jy
! Component: 1150  -  total flux cleaned = 0.00105087 Jy
! Component: 1200  -  total flux cleaned = 0.00112091 Jy
! Component: 1250  -  total flux cleaned = 0.00113796 Jy
! Component: 1300  -  total flux cleaned = 0.0011381 Jy
! Component: 1350  -  total flux cleaned = 0.00125679 Jy
! Component: 1400  -  total flux cleaned = 0.0013068 Jy
! Component: 1450  -  total flux cleaned = 0.00132336 Jy
! Component: 1500  -  total flux cleaned = 0.0014054 Jy
! Component: 1550  -  total flux cleaned = 0.00138904 Jy
! Component: 1600  -  total flux cleaned = 0.00142123 Jy
! Component: 1650  -  total flux cleaned = 0.00140524 Jy
! Component: 1700  -  total flux cleaned = 0.00145289 Jy
! Component: 1750  -  total flux cleaned = 0.001515 Jy
! Component: 1800  -  total flux cleaned = 0.00148411 Jy
! Component: 1850  -  total flux cleaned = 0.00156101 Jy
! Component: 1900  -  total flux cleaned = 0.00157616 Jy
! Component: 1950  -  total flux cleaned = 0.00163634 Jy
! Component: 2000  -  total flux cleaned = 0.0016513 Jy
! Component: 2050  -  total flux cleaned = 0.00175484 Jy
! Component: 2100  -  total flux cleaned = 0.00178417 Jy
! Component: 2150  -  total flux cleaned = 0.00182766 Jy
! Component: 2200  -  total flux cleaned = 0.00187087 Jy
! Component: 2250  -  total flux cleaned = 0.00188514 Jy
! Component: 2300  -  total flux cleaned = 0.00198411 Jy
! Component: 2350  -  total flux cleaned = 0.00202619 Jy
! Component: 2400  -  total flux cleaned = 0.00204 Jy
! Component: 2450  -  total flux cleaned = 0.00212293 Jy
! Component: 2500  -  total flux cleaned = 0.0021504 Jy
! Component: 2550  -  total flux cleaned = 0.00220472 Jy
! Component: 2600  -  total flux cleaned = 0.00225873 Jy
! Component: 2650  -  total flux cleaned = 0.00227209 Jy
! Component: 2700  -  total flux cleaned = 0.00233857 Jy
! Component: 2750  -  total flux cleaned = 0.00232521 Jy
! Component: 2800  -  total flux cleaned = 0.00236443 Jy
! Component: 2850  -  total flux cleaned = 0.00242925 Jy
! Component: 2900  -  total flux cleaned = 0.00245517 Jy
! Component: 2950  -  total flux cleaned = 0.00248095 Jy
! Component: 3000  -  total flux cleaned = 0.00255709 Jy
! Component: 3050  -  total flux cleaned = 0.00254433 Jy
! Component: 3100  -  total flux cleaned = 0.00255697 Jy
! Component: 3150  -  total flux cleaned = 0.00266875 Jy
! Component: 3200  -  total flux cleaned = 0.00265622 Jy
! Component: 3250  -  total flux cleaned = 0.00271761 Jy
! Component: 3300  -  total flux cleaned = 0.00276635 Jy
! Component: 3350  -  total flux cleaned = 0.00280266 Jy
! Component: 3400  -  total flux cleaned = 0.00286272 Jy
! Component: 3450  -  total flux cleaned = 0.00288683 Jy
! Component: 3500  -  total flux cleaned = 0.0029935 Jy
! Component: 3550  -  total flux cleaned = 0.00301708 Jy
! Component: 3600  -  total flux cleaned = 0.00313413 Jy
! Component: 3650  -  total flux cleaned = 0.00314556 Jy
! Component: 3700  -  total flux cleaned = 0.0031916 Jy
! Component: 3750  -  total flux cleaned = 0.00323756 Jy
! Component: 3800  -  total flux cleaned = 0.00329459 Jy
! Component: 3850  -  total flux cleaned = 0.00333988 Jy
! Component: 3900  -  total flux cleaned = 0.00343002 Jy
! Component: 3950  -  total flux cleaned = 0.0034861 Jy
! Component: 4000  -  total flux cleaned = 0.00350839 Jy
! Component: 4050  -  total flux cleaned = 0.0035747 Jy
! Total flux subtracted in 4096 components = 0.00364065 Jy
! Clean residual min=-0.000737 max=0.000812 Jy/beam
! Clean residual mean=0.000001 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.201625 Jy
keep
! Adding 295 model components to the UV plane model.
! The established model now contains 354 components and 0.201625 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1319+1039_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.718 x 7.441 at -0.8608 degrees (North through East)
! Clean map  min=-0.0012812  max=0.13924 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1319+1039_S_map.fits
wmodel /vlbi/uf001/uva//J1319+1039_S_map.mod
! Writing 354 model components to file: /vlbi/uf001/uva//J1319+1039_S_map.mod
wobs   /vlbi/uf001/uva//J1319+1039_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1319+1039_S_uvs.fits
wwins  /vlbi/uf001/uva//J1319+1039_S_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J1319+1039_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.139243 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000203768 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.439021 0.439021 0.878042 1.75608 3.51217 7.02433 14.0487 28.0973 56.1947
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.139 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  683.338 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1319+1039_S_dfm.log closed on Mon Jan 14 02:18:52 2019