! Started logfile: /vlbi/uf001/uva//J1317+4115_X_dfm.log on Mon Jan 14 02:17:55 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1317+4115_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1317+4115_X_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.927096 visibilities/baseline/integration-bin. ! Found source: J1317+4115 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 28536 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1317+4115_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.005386Jy sigma=25.534269 ! Fit after self-cal, rms=0.948281Jy sigma=24.104953 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8024 mas, bmaj=1.138 mas, bpa=13.51 degrees ! Estimated noise=0.345849 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0330852 Jy ! Component: 100 - total flux cleaned = 0.0464324 Jy ! Total flux subtracted in 100 components = 0.0464324 Jy ! Clean residual min=-0.005081 max=0.009295 Jy/beam ! Clean residual mean=0.000029 rms=0.001469 Jy/beam ! Combined flux in latest and established models = 0.0464324 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0464324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073141Jy sigma=1.784376 ! Fit after self-cal, rms=0.072084Jy sigma=1.757954 ! Inverting map ! Added new window around map position (1.2, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114947 Jy ! Component: 100 - total flux cleaned = 0.0203792 Jy ! Total flux subtracted in 100 components = 0.0203792 Jy ! Clean residual min=-0.004783 max=0.009289 Jy/beam ! Clean residual mean=0.000023 rms=0.001308 Jy/beam ! Combined flux in latest and established models = 0.0668116 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 38 components and 0.0668116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067646Jy sigma=1.644977 ! Fit after self-cal, rms=0.067434Jy sigma=1.639237 ! Inverting map ! Added new window around map position (-1.8, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100997 Jy ! Component: 100 - total flux cleaned = 0.0179144 Jy ! Total flux subtracted in 100 components = 0.0179144 Jy ! Clean residual min=-0.004375 max=0.007436 Jy/beam ! Clean residual mean=0.000017 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 0.084726 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 60 components and 0.084726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063985Jy sigma=1.551161 ! Fit after self-cal, rms=0.063783Jy sigma=1.545558 ! Inverting map ! Added new window around map position (1.6, 3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.008649 Jy ! Component: 100 - total flux cleaned = 0.015191 Jy ! Total flux subtracted in 100 components = 0.015191 Jy ! Clean residual min=-0.003949 max=0.006394 Jy/beam ! Clean residual mean=0.000013 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.099917 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 72 components and 0.099917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061295Jy sigma=1.481266 ! Fit after self-cal, rms=0.061026Jy sigma=1.473275 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00755595 Jy ! Component: 100 - total flux cleaned = 0.0131603 Jy ! Total flux subtracted in 100 components = 0.0131603 Jy ! Clean residual min=-0.003541 max=0.004913 Jy/beam ! Clean residual mean=0.000009 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.113077 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 78 components and 0.113077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059121Jy sigma=1.423473 ! Fit after self-cal, rms=0.058917Jy sigma=1.417383 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00623504 Jy ! Component: 100 - total flux cleaned = 0.0108523 Jy ! Total flux subtracted in 100 components = 0.0108523 Jy ! Clean residual min=-0.003232 max=0.003893 Jy/beam ! Clean residual mean=0.000006 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.12393 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 88 components and 0.12393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057579Jy sigma=1.381952 ! Fit after self-cal, rms=0.057448Jy sigma=1.378219 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.036 mas, bmaj=1.456 mas, bpa=15.04 degrees ! Estimated noise=0.168961 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00873667 Jy ! Component: 100 - total flux cleaned = 0.0146353 Jy ! Component: 150 - total flux cleaned = 0.0191652 Jy ! Component: 200 - total flux cleaned = 0.0227221 Jy ! Total flux subtracted in 200 components = 0.0227221 Jy ! Clean residual min=-0.002822 max=0.005093 Jy/beam ! Clean residual mean=-0.000006 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.146652 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 118 components and 0.146652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055730Jy sigma=1.332560 ! Fit after self-cal, rms=0.055533Jy sigma=1.326812 ! Inverting map ! Added new window around map position (-1.6, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00468987 Jy ! Component: 100 - total flux cleaned = 0.00713902 Jy ! Component: 150 - total flux cleaned = 0.00863785 Jy ! Component: 200 - total flux cleaned = 0.00955192 Jy ! Total flux subtracted in 200 components = 0.00955192 Jy ! Clean residual min=-0.002309 max=0.003729 Jy/beam ! Clean residual mean=-0.000012 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.156204 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 128 components and 0.156204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055018Jy sigma=1.312817 ! Fit after self-cal, rms=0.054921Jy sigma=1.310416 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.036 x 1.456 at 15.04 degrees (North through East) ! Clean map min=-0.0020693 max=0.037878 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.99 HN 0.91 KP 0.94 ! LA 1.00 MK 1.13 NL 1.16 OV 0.94 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 0.93 KP 0.95 ! LA 0.95 MK 1.05 NL 1.17 OV 0.97 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 0.96 KP 1.00 ! LA 0.96 MK 1.16 NL 1.11 OV 0.90 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.98 HN 0.93 KP 1.00 ! LA 0.95 MK 1.15 NL 1.16 OV 0.95 ! PT 0.97 SC 1.08 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.03 HN 1.02 KP 0.97 ! LA 0.94 MK 1.16 NL 1.09 OV 0.93 ! PT 0.95 SC 1.07 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 0.94 HN 0.92 KP 0.98 ! LA 0.99 MK 1.08 NL 1.06 OV 0.95 ! PT 0.96 SC 1.10 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.99 HN 0.95 KP 1.04 ! LA 0.94 MK 1.09 NL 1.13 OV 0.95 ! PT 0.97 SC 0.93 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.97 HN 0.91 KP 0.94 ! LA 0.96 MK 1.16 NL 1.13 OV 0.96 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 0.98 HN 0.89 KP 1.03 ! LA 0.98 MK 1.07 NL 1.11 OV 0.94 ! PT 0.96 SC 1.06 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.01 HN 0.87 KP 0.98 ! LA 0.95 MK 1.10 NL 1.16 OV 0.91 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.05 HN 0.94 KP 1.01 ! LA 0.98 MK 1.11 NL 1.09 OV 0.93 ! PT 0.97 SC 1.08 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.05 HN 0.98 KP 0.97 ! LA 0.94 MK 1.02 NL 1.01 OV 0.98 ! PT 0.98 SC 1.11 ! ! ! Fit before self-cal, rms=0.054921Jy sigma=1.310416 ! Fit after self-cal, rms=0.057056Jy sigma=1.301092 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.052 mas, bmaj=1.482 mas, bpa=15.33 degrees ! Estimated noise=0.17546 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.92262e-05 Jy ! Component: 100 - total flux cleaned = 6.5625e-05 Jy ! Component: 150 - total flux cleaned = 0.000310966 Jy ! Component: 200 - total flux cleaned = 0.00047176 Jy ! Total flux subtracted in 200 components = 0.00047176 Jy ! Clean residual min=-0.001737 max=0.002165 Jy/beam ! Clean residual mean=-0.000018 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.156675 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 133 components and 0.156675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056882Jy sigma=1.296199 ! Fit after self-cal, rms=0.056869Jy sigma=1.294928 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056869Jy sigma=1.294928 ! Fit after self-cal, rms=0.056611Jy sigma=1.286836 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.05 mas, bmaj=1.472 mas, bpa=14.1 degrees ! Estimated noise=0.174781 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.61415e-05 Jy ! Component: 100 - total flux cleaned = 0.000324396 Jy ! Component: 150 - total flux cleaned = 0.000372282 Jy ! Component: 200 - total flux cleaned = 0.000459569 Jy ! Total flux subtracted in 200 components = 0.000459569 Jy ! Clean residual min=-0.001356 max=0.001636 Jy/beam ! Clean residual mean=-0.000009 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.157135 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 138 components and 0.157135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056515Jy sigma=1.284167 ! Fit after self-cal, rms=0.056510Jy sigma=1.283557 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000808245 Jy ! Component: 100 - total flux cleaned = 0.00102281 Jy ! Component: 150 - total flux cleaned = 0.0011127 Jy ! Component: 200 - total flux cleaned = 0.0012333 Jy ! Total flux subtracted in 200 components = 0.0012333 Jy ! Clean residual min=-0.001298 max=0.001313 Jy/beam ! Clean residual mean=-0.000009 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.158368 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 144 components and 0.158368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056429Jy sigma=1.281421 ! Fit after self-cal, rms=0.056415Jy sigma=1.281122 ! Inverting map ! Added new window around map position (9, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000713544 Jy ! Component: 100 - total flux cleaned = 0.000710183 Jy ! Component: 150 - total flux cleaned = 0.000708194 Jy ! Component: 200 - total flux cleaned = 0.000707759 Jy ! Total flux subtracted in 200 components = 0.000707759 Jy ! Clean residual min=-0.001284 max=0.001283 Jy/beam ! Clean residual mean=-0.000009 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.159076 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 155 components and 0.159076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056352Jy sigma=1.279460 ! Fit after self-cal, rms=0.056341Jy sigma=1.279161 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056341Jy sigma=1.279161 ! Fit after self-cal, rms=0.056039Jy sigma=1.276883 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.047 mas, bmaj=1.459 mas, bpa=13.56 degrees ! Estimated noise=0.17291 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000251309 Jy ! Component: 100 - total flux cleaned = -0.000248011 Jy ! Component: 150 - total flux cleaned = -0.000209437 Jy ! Component: 200 - total flux cleaned = -0.000143133 Jy ! Total flux subtracted in 200 components = -0.000143133 Jy ! Clean residual min=-0.001286 max=0.001172 Jy/beam ! Clean residual mean=-0.000001 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.158933 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 162 components and 0.158933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055990Jy sigma=1.275528 ! Fit after self-cal, rms=0.056002Jy sigma=1.275323 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.14615e-05 Jy ! Component: 100 - total flux cleaned = 9.33045e-05 Jy ! Component: 150 - total flux cleaned = 0.0001264 Jy ! Component: 200 - total flux cleaned = 0.000156504 Jy ! Total flux subtracted in 200 components = 0.000156504 Jy ! Clean residual min=-0.001282 max=0.001129 Jy/beam ! Clean residual mean=-0.000001 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.159089 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 170 components and 0.159089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055969Jy sigma=1.274383 ! Fit after self-cal, rms=0.055966Jy sigma=1.274287 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055966Jy sigma=1.274287 ! Fit after self-cal, rms=0.055437Jy sigma=1.274150 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.207 mas, bmaj=2.574 mas, bpa=18.4 degrees ! Estimated noise=0.211395 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000252805 Jy ! Component: 100 - total flux cleaned = 0.000253914 Jy ! Component: 150 - total flux cleaned = 0.000253187 Jy ! Component: 200 - total flux cleaned = 0.000310206 Jy ! Total flux subtracted in 200 components = 0.000310206 Jy ! Clean residual min=-0.001002 max=0.001006 Jy/beam ! Clean residual mean=-0.000003 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.1594 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 180 components and 0.1594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055424Jy sigma=1.273783 ! Fit after self-cal, rms=0.055420Jy sigma=1.273702 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.81221e-05 Jy ! Component: 100 - total flux cleaned = 6.16177e-05 Jy ! Component: 150 - total flux cleaned = 0.000131422 Jy ! Component: 200 - total flux cleaned = 0.000178024 Jy ! Total flux subtracted in 200 components = 0.000178024 Jy ! Clean residual min=-0.000967 max=0.000989 Jy/beam ! Clean residual mean=-0.000003 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.159578 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 188 components and 0.159578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055413Jy sigma=1.273485 ! Fit after self-cal, rms=0.055409Jy sigma=1.273434 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.042 mas, bmaj=1.452 mas, bpa=13.51 degrees ! Estimated noise=0.171292 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.042 x 1.452 at 13.51 degrees (North through East) ! Clean map min=-0.0011576 max=0.034063 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8056 mas, bmaj=1.127 mas, bpa=11.32 degrees ! Estimated noise=0.353149 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0333744 Jy ! Component: 100 - total flux cleaned = 0.0549767 Jy ! Component: 150 - total flux cleaned = 0.0713018 Jy ! Component: 200 - total flux cleaned = 0.0839543 Jy ! Total flux subtracted in 200 components = 0.0839543 Jy ! Clean residual min=-0.004260 max=0.008223 Jy/beam ! Clean residual mean=0.000020 rms=0.001139 Jy/beam ! Combined flux in latest and established models = 0.0839543 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.0839543 Jy ! Inverting map and beam ! Estimated beam: bmin=1.042 mas, bmaj=1.452 mas, bpa=13.51 degrees ! Estimated noise=0.171292 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179534 Jy ! Component: 100 - total flux cleaned = 0.0306542 Jy ! Component: 150 - total flux cleaned = 0.0400551 Jy ! Component: 200 - total flux cleaned = 0.0471495 Jy ! Total flux subtracted in 200 components = 0.0471495 Jy ! Clean residual min=-0.002175 max=0.004375 Jy/beam ! Clean residual mean=0.000015 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.131104 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 78 components and 0.131104 Jy ! Inverting map ! Added new window around map position (-0.8, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00557884 Jy ! Component: 100 - total flux cleaned = 0.0100181 Jy ! Component: 150 - total flux cleaned = 0.0136195 Jy ! Component: 200 - total flux cleaned = 0.0165691 Jy ! Total flux subtracted in 200 components = 0.0165691 Jy ! Clean residual min=-0.001634 max=0.002102 Jy/beam ! Clean residual mean=0.000005 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.147673 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 115 components and 0.147673 Jy ! Inverting map ! Added new window around map position (0.4, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250776 Jy ! Component: 100 - total flux cleaned = 0.00456889 Jy ! Component: 150 - total flux cleaned = 0.00596757 Jy ! Component: 200 - total flux cleaned = 0.00681554 Jy ! Total flux subtracted in 200 components = 0.00681554 Jy ! Clean residual min=-0.001393 max=0.001213 Jy/beam ! Clean residual mean=0.000002 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.154488 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 139 components and 0.154488 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.207 mas, bmaj=2.574 mas, bpa=18.4 degrees ! Estimated noise=0.211395 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020304 Jy ! Component: 100 - total flux cleaned = 0.00297766 Jy ! Component: 150 - total flux cleaned = 0.00351024 Jy ! Component: 200 - total flux cleaned = 0.0037845 Jy ! Total flux subtracted in 200 components = 0.0037845 Jy ! Clean residual min=-0.001127 max=0.001013 Jy/beam ! Clean residual mean=-0.000001 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.158273 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000210797 Jy ! Component: 100 - total flux cleaned = 0.000327071 Jy ! Component: 150 - total flux cleaned = 0.000452263 Jy ! Component: 200 - total flux cleaned = 0.00052753 Jy ! Total flux subtracted in 200 components = 0.00052753 Jy ! Clean residual min=-0.001090 max=0.000960 Jy/beam ! Clean residual mean=-0.000002 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.1588 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 198 components and 0.1588 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.042 mas, bmaj=1.452 mas, bpa=13.51 degrees ! Estimated noise=0.171292 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000515552 Jy ! Component: 100 - total flux cleaned = -0.000630438 Jy ! Component: 150 - total flux cleaned = -0.000461057 Jy ! Component: 200 - total flux cleaned = -0.000337077 Jy ! Total flux subtracted in 200 components = -0.000337077 Jy ! Clean residual min=-0.001161 max=0.000928 Jy/beam ! Clean residual mean=-0.000001 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.158463 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 220 components and 0.158463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055391Jy sigma=1.273034 ! Fit after self-cal, rms=0.055336Jy sigma=1.272044 wmodel J1317+4115_X_map.mod ! Writing 220 model components to file: J1317+4115_X_map.mod wobs J1317+4115_X_uvs.fits ! Writing UV FITS file: J1317+4115_X_uvs.fits wwins J1317+4115_X_map.win ! wwins: Wrote 9 windows to J1317+4115_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000496272 Jy ! Component: 100 - total flux cleaned = -0.000788823 Jy ! Component: 150 - total flux cleaned = -0.000953517 Jy ! Component: 200 - total flux cleaned = -0.00101742 Jy ! Component: 250 - total flux cleaned = -0.00111111 Jy ! Component: 300 - total flux cleaned = -0.00123309 Jy ! Component: 350 - total flux cleaned = -0.0013078 Jy ! Component: 400 - total flux cleaned = -0.00138126 Jy ! Component: 450 - total flux cleaned = -0.00145326 Jy ! Component: 500 - total flux cleaned = -0.00149559 Jy ! Component: 550 - total flux cleaned = -0.00153729 Jy ! Component: 600 - total flux cleaned = -0.00155092 Jy ! Component: 650 - total flux cleaned = -0.00163232 Jy ! Component: 700 - total flux cleaned = -0.00165882 Jy ! Component: 750 - total flux cleaned = -0.00167205 Jy ! Component: 800 - total flux cleaned = -0.00172419 Jy ! Component: 850 - total flux cleaned = -0.00177574 Jy ! Component: 900 - total flux cleaned = -0.00178839 Jy ! Component: 950 - total flux cleaned = -0.00185148 Jy ! Component: 1000 - total flux cleaned = -0.00187628 Jy ! Component: 1050 - total flux cleaned = -0.00190104 Jy ! Component: 1100 - total flux cleaned = -0.00197402 Jy ! Component: 1150 - total flux cleaned = -0.00198616 Jy ! Component: 1200 - total flux cleaned = -0.00202196 Jy ! Component: 1250 - total flux cleaned = -0.00206924 Jy ! Component: 1300 - total flux cleaned = -0.00211616 Jy ! Component: 1350 - total flux cleaned = -0.00216251 Jy ! Component: 1400 - total flux cleaned = -0.00223135 Jy ! Component: 1450 - total flux cleaned = -0.00228839 Jy ! Component: 1500 - total flux cleaned = -0.00229959 Jy ! Component: 1550 - total flux cleaned = -0.00236683 Jy ! Component: 1600 - total flux cleaned = -0.00241101 Jy ! Component: 1650 - total flux cleaned = -0.00245503 Jy ! Component: 1700 - total flux cleaned = -0.0025093 Jy ! Component: 1750 - total flux cleaned = -0.00254168 Jy ! Component: 1800 - total flux cleaned = -0.0025311 Jy ! Component: 1850 - total flux cleaned = -0.0025842 Jy ! Component: 1900 - total flux cleaned = -0.00261585 Jy ! Component: 1950 - total flux cleaned = -0.0026576 Jy ! Component: 2000 - total flux cleaned = -0.00263684 Jy ! Component: 2050 - total flux cleaned = -0.00265754 Jy ! Component: 2100 - total flux cleaned = -0.00268822 Jy ! Component: 2150 - total flux cleaned = -0.0027691 Jy ! Component: 2200 - total flux cleaned = -0.00276901 Jy ! Component: 2250 - total flux cleaned = -0.00276902 Jy ! Component: 2300 - total flux cleaned = -0.00279872 Jy ! Component: 2350 - total flux cleaned = -0.00275944 Jy ! Component: 2400 - total flux cleaned = -0.00279855 Jy ! Component: 2450 - total flux cleaned = -0.00288584 Jy ! Component: 2500 - total flux cleaned = -0.0028665 Jy ! Component: 2550 - total flux cleaned = -0.0028762 Jy ! Component: 2600 - total flux cleaned = -0.00293316 Jy ! Component: 2650 - total flux cleaned = -0.00293318 Jy ! Component: 2700 - total flux cleaned = -0.00297068 Jy ! Component: 2750 - total flux cleaned = -0.00297996 Jy ! Component: 2800 - total flux cleaned = -0.00299848 Jy ! Component: 2850 - total flux cleaned = -0.00306282 Jy ! Component: 2900 - total flux cleaned = -0.00310848 Jy ! Component: 2950 - total flux cleaned = -0.00309935 Jy ! Component: 3000 - total flux cleaned = -0.00312648 Jy ! Component: 3050 - total flux cleaned = -0.00318928 Jy ! Component: 3100 - total flux cleaned = -0.00319832 Jy ! Component: 3150 - total flux cleaned = -0.00323371 Jy ! Component: 3200 - total flux cleaned = -0.00328667 Jy ! Component: 3250 - total flux cleaned = -0.00332172 Jy ! Component: 3300 - total flux cleaned = -0.00333036 Jy ! Component: 3350 - total flux cleaned = -0.00338233 Jy ! Component: 3400 - total flux cleaned = -0.00338232 Jy ! Component: 3450 - total flux cleaned = -0.0034165 Jy ! Component: 3500 - total flux cleaned = -0.00345909 Jy ! Component: 3550 - total flux cleaned = -0.00349299 Jy ! Component: 3600 - total flux cleaned = -0.00352656 Jy ! Component: 3650 - total flux cleaned = -0.00356855 Jy ! Component: 3700 - total flux cleaned = -0.00355188 Jy ! Component: 3750 - total flux cleaned = -0.00360993 Jy ! Component: 3800 - total flux cleaned = -0.00364291 Jy ! Component: 3850 - total flux cleaned = -0.00369209 Jy ! Component: 3900 - total flux cleaned = -0.00370018 Jy ! Component: 3950 - total flux cleaned = -0.00376505 Jy ! Component: 4000 - total flux cleaned = -0.00378117 Jy ! Component: 4050 - total flux cleaned = -0.00379726 Jy ! Total flux subtracted in 4096 components = -0.00382924 Jy ! Clean residual min=-0.000491 max=0.000582 Jy/beam ! Clean residual mean=-0.000001 rms=0.000136 Jy/beam ! Combined flux in latest and established models = 0.154634 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 531 components and 0.154634 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1317+4115_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.042 x 1.452 at 13.51 degrees (North through East) ! Clean map min=-0.00076801 max=0.032818 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1317+4115_X_map.fits wmodel /vlbi/uf001/uva//J1317+4115_X_map.mod ! Writing 531 model components to file: /vlbi/uf001/uva//J1317+4115_X_map.mod wobs /vlbi/uf001/uva//J1317+4115_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1317+4115_X_uvs.fits wwins /vlbi/uf001/uva//J1317+4115_X_map.win ! wwins: Wrote 10 windows to /vlbi/uf001/uva//J1317+4115_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0328179 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000135908 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.24239 1.24239 2.48477 4.96954 9.93909 19.8782 39.7563 79.5127 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.032 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 241.47 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1317+4115_X_dfm.log closed on Mon Jan 14 02:18:02 2019