! Started logfile: /vlbi/uf001/uva//J1311+1658_X_dfm.log on Mon Jan 14 02:14:50 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1311+1658_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1311+1658_X_uva.fits ! AN table 1: 87 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.990805 visibilities/baseline/integration-bin. ! Found source: J1311+1658 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 46548 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1311+1658_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006116Jy sigma=24.178437 ! Fit after self-cal, rms=0.918230Jy sigma=22.013006 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7215 mas, bmaj=1.584 mas, bpa=-2.754 degrees ! Estimated noise=0.250078 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0594712 Jy ! Component: 100 - total flux cleaned = 0.081973 Jy ! Total flux subtracted in 100 components = 0.081973 Jy ! Clean residual min=-0.005124 max=0.016867 Jy/beam ! Clean residual mean=-0.000005 rms=0.001382 Jy/beam ! Combined flux in latest and established models = 0.081973 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.081973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068842Jy sigma=1.611319 ! Fit after self-cal, rms=0.068319Jy sigma=1.598938 ! Inverting map ! Added new window around map position (-0.8, 2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171302 Jy ! Component: 100 - total flux cleaned = 0.0281634 Jy ! Total flux subtracted in 100 components = 0.0281634 Jy ! Clean residual min=-0.004428 max=0.008313 Jy/beam ! Clean residual mean=-0.000004 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.110136 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 30 components and 0.110136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061352Jy sigma=1.420455 ! Fit after self-cal, rms=0.060943Jy sigma=1.411353 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00967194 Jy ! Component: 100 - total flux cleaned = 0.0166577 Jy ! Total flux subtracted in 100 components = 0.0166577 Jy ! Clean residual min=-0.003562 max=0.005769 Jy/beam ! Clean residual mean=-0.000003 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.126794 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 37 components and 0.126794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058189Jy sigma=1.340347 ! Fit after self-cal, rms=0.058037Jy sigma=1.337212 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00611833 Jy ! Component: 100 - total flux cleaned = 0.0107216 Jy ! Total flux subtracted in 100 components = 0.0107216 Jy ! Clean residual min=-0.003105 max=0.004529 Jy/beam ! Clean residual mean=-0.000003 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.137516 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 46 components and 0.137516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056812Jy sigma=1.305843 ! Fit after self-cal, rms=0.056760Jy sigma=1.304814 ! Inverting map ! Added new window around map position (3.8, -7.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00453255 Jy ! Component: 100 - total flux cleaned = 0.00796994 Jy ! Total flux subtracted in 100 components = 0.00796994 Jy ! Clean residual min=-0.002942 max=0.004042 Jy/beam ! Clean residual mean=-0.000003 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.145486 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 55 components and 0.145486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056060Jy sigma=1.286966 ! Fit after self-cal, rms=0.056027Jy sigma=1.286324 ! Inverting map ! Added new window around map position (-6, 8.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00386365 Jy ! Component: 100 - total flux cleaned = 0.00679513 Jy ! Total flux subtracted in 100 components = 0.00679513 Jy ! Clean residual min=-0.002753 max=0.003691 Jy/beam ! Clean residual mean=-0.000002 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.152281 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 65 components and 0.152281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055539Jy sigma=1.274103 ! Fit after self-cal, rms=0.055523Jy sigma=1.273747 ! Inverting map ! Added new window around map position (-2.2, 3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355872 Jy ! Component: 100 - total flux cleaned = 0.00619265 Jy ! Total flux subtracted in 100 components = 0.00619265 Jy ! Clean residual min=-0.002649 max=0.003138 Jy/beam ! Clean residual mean=-0.000002 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.158474 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 72 components and 0.158474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055089Jy sigma=1.263172 ! Fit after self-cal, rms=0.055075Jy sigma=1.262880 ! Inverting map ! Added new window around map position (0.8, 3.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00303877 Jy ! Component: 100 - total flux cleaned = 0.00531223 Jy ! Total flux subtracted in 100 components = 0.00531223 Jy ! Clean residual min=-0.002531 max=0.002234 Jy/beam ! Clean residual mean=-0.000002 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.163786 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 81 components and 0.163786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054779Jy sigma=1.255375 ! Fit after self-cal, rms=0.054765Jy sigma=1.255142 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9092 mas, bmaj=1.888 mas, bpa=-2.838 degrees ! Estimated noise=0.140421 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00402806 Jy ! Component: 100 - total flux cleaned = 0.00722964 Jy ! Component: 150 - total flux cleaned = 0.0099522 Jy ! Component: 200 - total flux cleaned = 0.0123083 Jy ! Total flux subtracted in 200 components = 0.0123083 Jy ! Clean residual min=-0.002511 max=0.002843 Jy/beam ! Clean residual mean=-0.000004 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.176094 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 103 components and 0.176094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054280Jy sigma=1.243386 ! Fit after self-cal, rms=0.054253Jy sigma=1.242783 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9092 x 1.888 at -2.838 degrees (North through East) ! Clean map min=-0.002388 max=0.074456 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.04 HN 0.95 KP 0.99 ! LA 0.96 MK 1.06 NL 1.08 OV 0.96 ! PT 0.88 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.06 HN 0.96 KP 0.99 ! LA 0.96 MK 1.03 NL 1.08 OV 0.97 ! PT 0.89 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.07 HN 0.99 KP 0.99 ! LA 0.95 MK 1.01 NL 1.07 OV 0.96 ! PT 0.89 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.06 HN 0.95 KP 0.99 ! LA 0.97 MK 1.06 NL 1.07 OV 0.96 ! PT 0.89 SC 0.95 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.06 HN 0.95 KP 0.99 ! LA 0.99 MK 1.07 NL 1.08 OV 0.96 ! PT 0.89 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.07 HN 0.98 KP 1.00 ! LA 0.95 MK 1.06 NL 1.09 OV 0.97 ! PT 0.91 SC 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.07 HN 0.94 KP 1.01 ! LA 0.97 MK 1.04 NL 1.07 OV 0.97 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.09 HN 0.98 KP 1.00 ! LA 0.96 MK 1.05 NL 1.10 OV 0.96 ! PT 0.91 SC 0.94 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.06 HN 0.96 KP 1.02 ! LA 0.95 MK 1.09 NL 1.07 OV 0.96 ! PT 0.90 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.05 HN 0.96 KP 1.01 ! LA 0.97 MK 1.05 NL 1.11 OV 0.95 ! PT 0.90 SC 0.96 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 0.98 KP 1.02 ! LA 0.98 MK 1.06 NL 1.10 OV 0.94 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.05 HN 0.96 KP 1.02 ! LA 0.97 MK 1.04 NL 1.10 OV 0.98 ! PT 0.90 SC 0.95 ! ! ! Fit before self-cal, rms=0.054253Jy sigma=1.242783 ! Fit after self-cal, rms=0.053518Jy sigma=1.227379 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9168 mas, bmaj=1.902 mas, bpa=-2.274 degrees ! Estimated noise=0.140191 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197248 Jy ! Component: 100 - total flux cleaned = 0.00262192 Jy ! Component: 150 - total flux cleaned = 0.00306693 Jy ! Component: 200 - total flux cleaned = 0.00333112 Jy ! Total flux subtracted in 200 components = 0.00333112 Jy ! Clean residual min=-0.001397 max=0.001719 Jy/beam ! Clean residual mean=0.000000 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.179425 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 127 components and 0.179425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053414Jy sigma=1.224405 ! Fit after self-cal, rms=0.053420Jy sigma=1.223981 ! Inverting map ! Added new window around map position (1.6, -6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171953 Jy ! Component: 100 - total flux cleaned = 0.00223477 Jy ! Component: 150 - total flux cleaned = 0.00245105 Jy ! Component: 200 - total flux cleaned = 0.00267771 Jy ! Total flux subtracted in 200 components = 0.00267771 Jy ! Clean residual min=-0.001266 max=0.001302 Jy/beam ! Clean residual mean=0.000001 rms=0.000292 Jy/beam ! Combined flux in latest and established models = 0.182103 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 147 components and 0.182103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053351Jy sigma=1.222198 ! Fit after self-cal, rms=0.053345Jy sigma=1.222098 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053345Jy sigma=1.222098 ! Fit after self-cal, rms=0.053639Jy sigma=1.218206 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9131 mas, bmaj=1.898 mas, bpa=-2.385 degrees ! Estimated noise=0.139897 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101444 Jy ! Component: 100 - total flux cleaned = 0.000401394 Jy ! Component: 150 - total flux cleaned = 0.000638101 Jy ! Component: 200 - total flux cleaned = 0.000874611 Jy ! Total flux subtracted in 200 components = 0.000874611 Jy ! Clean residual min=-0.001033 max=0.001124 Jy/beam ! Clean residual mean=0.000000 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.182977 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 168 components and 0.182977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053604Jy sigma=1.217279 ! Fit after self-cal, rms=0.053612Jy sigma=1.217157 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8.6, 29.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000365335 Jy ! Component: 100 - total flux cleaned = 0.000391118 Jy ! Component: 150 - total flux cleaned = 0.00049802 Jy ! Component: 200 - total flux cleaned = 0.000571676 Jy ! Total flux subtracted in 200 components = 0.000571676 Jy ! Clean residual min=-0.000943 max=0.000969 Jy/beam ! Clean residual mean=0.000000 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.183549 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 181 components and 0.183549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053580Jy sigma=1.216419 ! Fit after self-cal, rms=0.053578Jy sigma=1.216370 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053578Jy sigma=1.216370 ! Fit after self-cal, rms=0.053592Jy sigma=1.216230 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9112 mas, bmaj=1.899 mas, bpa=-2.349 degrees ! Estimated noise=0.139775 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000168398 Jy ! Component: 100 - total flux cleaned = 0.000428184 Jy ! Component: 150 - total flux cleaned = 0.000545952 Jy ! Component: 200 - total flux cleaned = 0.000657188 Jy ! Total flux subtracted in 200 components = 0.000657188 Jy ! Clean residual min=-0.000915 max=0.000938 Jy/beam ! Clean residual mean=0.000000 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.184206 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 191 components and 0.184206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053571Jy sigma=1.215706 ! Fit after self-cal, rms=0.053571Jy sigma=1.215671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.4, 8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000550003 Jy ! Component: 100 - total flux cleaned = 0.000644366 Jy ! Component: 150 - total flux cleaned = 0.000731604 Jy ! Component: 200 - total flux cleaned = 0.000792103 Jy ! Total flux subtracted in 200 components = 0.000792103 Jy ! Clean residual min=-0.000904 max=0.000884 Jy/beam ! Clean residual mean=0.000000 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.184998 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 201 components and 0.184998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053549Jy sigma=1.215170 ! Fit after self-cal, rms=0.053547Jy sigma=1.215124 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053547Jy sigma=1.215124 ! Fit after self-cal, rms=0.053496Jy sigma=1.215049 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.108 mas, bmaj=2.907 mas, bpa=-2.542 degrees ! Estimated noise=0.173943 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103152 Jy ! Component: 100 - total flux cleaned = 0.00139433 Jy ! Component: 150 - total flux cleaned = 0.00150158 Jy ! Component: 200 - total flux cleaned = 0.00161498 Jy ! Total flux subtracted in 200 components = 0.00161498 Jy ! Clean residual min=-0.001002 max=0.000846 Jy/beam ! Clean residual mean=0.000001 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.186613 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 223 components and 0.186613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053487Jy sigma=1.214809 ! Fit after self-cal, rms=0.053485Jy sigma=1.214763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.17608e-05 Jy ! Component: 100 - total flux cleaned = 0.00014614 Jy ! Component: 150 - total flux cleaned = 0.000211337 Jy ! Component: 200 - total flux cleaned = 0.000256014 Jy ! Total flux subtracted in 200 components = 0.000256014 Jy ! Clean residual min=-0.000934 max=0.000802 Jy/beam ! Clean residual mean=0.000001 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.186869 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 235 components and 0.186869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053480Jy sigma=1.214621 ! Fit after self-cal, rms=0.053477Jy sigma=1.214588 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.91 mas, bmaj=1.9 mas, bpa=-2.372 degrees ! Estimated noise=0.139627 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.91 x 1.9 at -2.372 degrees (North through East) ! Clean map min=-0.00074365 max=0.073502 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7207 mas, bmaj=1.594 mas, bpa=-2.327 degrees ! Estimated noise=0.250159 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0602365 Jy ! Component: 100 - total flux cleaned = 0.0867205 Jy ! Component: 150 - total flux cleaned = 0.102943 Jy ! Component: 200 - total flux cleaned = 0.114172 Jy ! Total flux subtracted in 200 components = 0.114172 Jy ! Clean residual min=-0.002911 max=0.006359 Jy/beam ! Clean residual mean=-0.000003 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.114172 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.114172 Jy ! Inverting map and beam ! Estimated beam: bmin=0.91 mas, bmaj=1.9 mas, bpa=-2.372 degrees ! Estimated noise=0.139627 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133642 Jy ! Component: 100 - total flux cleaned = 0.0225027 Jy ! Component: 150 - total flux cleaned = 0.0293618 Jy ! Component: 200 - total flux cleaned = 0.0347191 Jy ! Total flux subtracted in 200 components = 0.0347191 Jy ! Clean residual min=-0.002034 max=0.003269 Jy/beam ! Clean residual mean=-0.000005 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.148891 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 70 components and 0.148891 Jy ! Inverting map ! Added new window around map position (0.8, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00437748 Jy ! Component: 100 - total flux cleaned = 0.00802343 Jy ! Component: 150 - total flux cleaned = 0.0111291 Jy ! Component: 200 - total flux cleaned = 0.0138258 Jy ! Total flux subtracted in 200 components = 0.0138258 Jy ! Clean residual min=-0.001475 max=0.001755 Jy/beam ! Clean residual mean=-0.000003 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.162717 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 113 components and 0.162717 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.108 mas, bmaj=2.907 mas, bpa=-2.542 degrees ! Estimated noise=0.173943 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00435147 Jy ! Component: 100 - total flux cleaned = 0.00769927 Jy ! Component: 150 - total flux cleaned = 0.0104031 Jy ! Component: 200 - total flux cleaned = 0.0126223 Jy ! Total flux subtracted in 200 components = 0.0126223 Jy ! Clean residual min=-0.001441 max=0.001440 Jy/beam ! Clean residual mean=-0.000002 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.17534 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183629 Jy ! Component: 100 - total flux cleaned = 0.0033659 Jy ! Component: 150 - total flux cleaned = 0.00465136 Jy ! Component: 200 - total flux cleaned = 0.00573761 Jy ! Total flux subtracted in 200 components = 0.00573761 Jy ! Clean residual min=-0.001039 max=0.000972 Jy/beam ! Clean residual mean=-0.000000 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.181077 Jy ! Adding 118 model components to the UV plane model. ! The established model now contains 213 components and 0.181077 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.91 mas, bmaj=1.9 mas, bpa=-2.372 degrees ! Estimated noise=0.139627 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122175 Jy ! Component: 100 - total flux cleaned = 0.00206373 Jy ! Component: 150 - total flux cleaned = 0.0025651 Jy ! Component: 200 - total flux cleaned = 0.00292767 Jy ! Total flux subtracted in 200 components = 0.00292767 Jy ! Clean residual min=-0.000880 max=0.000934 Jy/beam ! Clean residual mean=0.000000 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.184005 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 244 components and 0.184005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053520Jy sigma=1.215611 ! Fit after self-cal, rms=0.053492Jy sigma=1.215096 wmodel J1311+1658_X_map.mod ! Writing 244 model components to file: J1311+1658_X_map.mod wobs J1311+1658_X_uvs.fits ! Writing UV FITS file: J1311+1658_X_uvs.fits wwins J1311+1658_X_map.win ! wwins: Wrote 11 windows to J1311+1658_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.36719e-05 Jy ! Component: 100 - total flux cleaned = 0.000158448 Jy ! Component: 150 - total flux cleaned = 0.000172191 Jy ! Component: 200 - total flux cleaned = 0.000143896 Jy ! Component: 250 - total flux cleaned = 0.000143663 Jy ! Component: 300 - total flux cleaned = 0.000103782 Jy ! Component: 350 - total flux cleaned = 7.7836e-05 Jy ! Component: 400 - total flux cleaned = 7.78283e-05 Jy ! Component: 450 - total flux cleaned = 4.03129e-05 Jy ! Component: 500 - total flux cleaned = 2.80284e-05 Jy ! Component: 550 - total flux cleaned = 1.60542e-05 Jy ! Component: 600 - total flux cleaned = 1.60146e-05 Jy ! Component: 650 - total flux cleaned = 4.06152e-06 Jy ! Component: 700 - total flux cleaned = -7.72507e-06 Jy ! Component: 750 - total flux cleaned = -7.54597e-05 Jy ! Component: 800 - total flux cleaned = -7.52508e-05 Jy ! Component: 850 - total flux cleaned = -8.60918e-05 Jy ! Component: 900 - total flux cleaned = -6.46368e-05 Jy ! Component: 950 - total flux cleaned = -7.55227e-05 Jy ! Component: 1000 - total flux cleaned = -5.43214e-05 Jy ! Component: 1050 - total flux cleaned = -4.38859e-05 Jy ! Component: 1100 - total flux cleaned = -5.44748e-05 Jy ! Component: 1150 - total flux cleaned = -9.55591e-05 Jy ! Component: 1200 - total flux cleaned = -7.50969e-05 Jy ! Component: 1250 - total flux cleaned = -4.48612e-05 Jy ! Component: 1300 - total flux cleaned = -1.52344e-05 Jy ! Component: 1350 - total flux cleaned = -3.48517e-05 Jy ! Component: 1400 - total flux cleaned = -4.4487e-05 Jy ! Component: 1450 - total flux cleaned = -5.93285e-06 Jy ! Component: 1500 - total flux cleaned = -5.91884e-06 Jy ! Component: 1550 - total flux cleaned = -1.54735e-05 Jy ! Component: 1600 - total flux cleaned = -6.16549e-06 Jy ! Component: 1650 - total flux cleaned = -3.40174e-05 Jy ! Component: 1700 - total flux cleaned = 2.13608e-05 Jy ! Component: 1750 - total flux cleaned = 2.12948e-05 Jy ! Component: 1800 - total flux cleaned = 4.84442e-05 Jy ! Component: 1850 - total flux cleaned = 3.03042e-05 Jy ! Component: 1900 - total flux cleaned = 7.49715e-05 Jy ! Component: 1950 - total flux cleaned = 4.84301e-05 Jy ! Component: 2000 - total flux cleaned = 0.000109982 Jy ! Component: 2050 - total flux cleaned = 0.000101303 Jy ! Component: 2100 - total flux cleaned = 9.27187e-05 Jy ! Component: 2150 - total flux cleaned = 8.41766e-05 Jy ! Component: 2200 - total flux cleaned = 0.000126956 Jy ! Component: 2250 - total flux cleaned = 9.30546e-05 Jy ! Component: 2300 - total flux cleaned = 0.00012672 Jy ! Component: 2350 - total flux cleaned = 0.000118399 Jy ! Component: 2400 - total flux cleaned = 0.000118383 Jy ! Component: 2450 - total flux cleaned = 9.36362e-05 Jy ! Component: 2500 - total flux cleaned = 0.00011832 Jy ! Component: 2550 - total flux cleaned = 0.000118248 Jy ! Component: 2600 - total flux cleaned = 9.39611e-05 Jy ! Component: 2650 - total flux cleaned = 9.39315e-05 Jy ! Component: 2700 - total flux cleaned = 0.000101897 Jy ! Component: 2750 - total flux cleaned = 7.81257e-05 Jy ! Component: 2800 - total flux cleaned = 6.23313e-05 Jy ! Component: 2850 - total flux cleaned = 3.09471e-05 Jy ! Component: 2900 - total flux cleaned = 3.09496e-05 Jy ! Component: 2950 - total flux cleaned = 2.32286e-05 Jy ! Component: 3000 - total flux cleaned = 3.09471e-05 Jy ! Component: 3050 - total flux cleaned = 3.96419e-07 Jy ! Component: 3100 - total flux cleaned = 4.63453e-07 Jy ! Component: 3150 - total flux cleaned = 3.60645e-07 Jy ! Component: 3200 - total flux cleaned = -7.16357e-06 Jy ! Component: 3250 - total flux cleaned = -5.18324e-05 Jy ! Component: 3300 - total flux cleaned = -4.44238e-05 Jy ! Component: 3350 - total flux cleaned = -3.70946e-05 Jy ! Component: 3400 - total flux cleaned = -5.1688e-05 Jy ! Component: 3450 - total flux cleaned = -7.35039e-05 Jy ! Component: 3500 - total flux cleaned = -6.63417e-05 Jy ! Component: 3550 - total flux cleaned = -9.50726e-05 Jy ! Component: 3600 - total flux cleaned = -0.000109346 Jy ! Component: 3650 - total flux cleaned = -0.000116426 Jy ! Component: 3700 - total flux cleaned = -0.000116478 Jy ! Component: 3750 - total flux cleaned = -0.000144664 Jy ! Component: 3800 - total flux cleaned = -0.000137681 Jy ! Component: 3850 - total flux cleaned = -0.000179399 Jy ! Component: 3900 - total flux cleaned = -0.000227772 Jy ! Component: 3950 - total flux cleaned = -0.000220836 Jy ! Component: 4000 - total flux cleaned = -0.000220823 Jy ! Component: 4050 - total flux cleaned = -0.000247954 Jy ! Total flux subtracted in 4096 components = -0.00022764 Jy ! Clean residual min=-0.000413 max=0.000414 Jy/beam ! Clean residual mean=0.000000 rms=0.000116 Jy/beam ! Combined flux in latest and established models = 0.183777 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 560 components and 0.183777 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1311+1658_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.91 x 1.9 at -2.372 degrees (North through East) ! Clean map min=-0.00062555 max=0.073559 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1311+1658_X_map.fits wmodel /vlbi/uf001/uva//J1311+1658_X_map.mod ! Writing 560 model components to file: /vlbi/uf001/uva//J1311+1658_X_map.mod wobs /vlbi/uf001/uva//J1311+1658_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1311+1658_X_uvs.fits wwins /vlbi/uf001/uva//J1311+1658_X_map.win ! wwins: Wrote 12 windows to /vlbi/uf001/uva//J1311+1658_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0735587 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000116089 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.473453 0.473453 0.946907 1.89381 3.78763 7.57525 15.1505 30.301 60.602 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.073 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 633.642 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1311+1658_X_dfm.log closed on Mon Jan 14 02:14:57 2019