! Started logfile: /vlbi/uf001/uva//J1311+1417_S_dfm.log on Mon Jan 14 02:14:30 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1311+1417_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1311+1417_S_uva.fits
! AN table 1: 72 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.921914 visibilities/baseline/integration-bin.
! Found source: J1311+1417
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 8961 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1311+1417_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.157344Jy  sigma=21.223123
! Fit after  self-cal, rms=0.540979Jy  sigma=10.616706
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.847 mas, bmaj=6.382 mas, bpa=-4.043 degrees
! Estimated noise=0.546309 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.386345 Jy
! Component: 100  -  total flux cleaned = 0.537801 Jy
! Total flux subtracted in 100 components = 0.537801 Jy
! Clean residual min=-0.020227 max=0.066744 Jy/beam
! Clean residual mean=-0.000028 rms=0.006624 Jy/beam
! Combined flux in latest and established models = 0.537801 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.537801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.157879Jy  sigma=2.688518
! Fit after  self-cal, rms=0.153895Jy  sigma=2.589536
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0783254 Jy
! Component: 100  -  total flux cleaned = 0.120595 Jy
! Total flux subtracted in 100 components = 0.120595 Jy
! Clean residual min=-0.010650 max=0.021298 Jy/beam
! Clean residual mean=-0.000012 rms=0.002749 Jy/beam
! Combined flux in latest and established models = 0.658396 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 19 components and 0.658396 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094985Jy  sigma=1.531603
! Fit after  self-cal, rms=0.094558Jy  sigma=1.520923
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.026331 Jy
! Component: 100  -  total flux cleaned = 0.0420244 Jy
! Total flux subtracted in 100 components = 0.0420244 Jy
! Clean residual min=-0.007544 max=0.009944 Jy/beam
! Clean residual mean=-0.000008 rms=0.001926 Jy/beam
! Combined flux in latest and established models = 0.70042 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 30 components and 0.70042 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084464Jy  sigma=1.341112
! Fit after  self-cal, rms=0.084386Jy  sigma=1.339334
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.324 mas, bmaj=7.042 mas, bpa=-2.772 degrees
! Estimated noise=0.410793 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0127778 Jy
! Component: 100  -  total flux cleaned = 0.019751 Jy
! Component: 150  -  total flux cleaned = 0.0239153 Jy
! Component: 200  -  total flux cleaned = 0.0254416 Jy
! Total flux subtracted in 200 components = 0.0254416 Jy
! Clean residual min=-0.006717 max=0.008968 Jy/beam
! Clean residual mean=-0.000006 rms=0.001686 Jy/beam
! Combined flux in latest and established models = 0.725862 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 40 components and 0.725862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081993Jy  sigma=1.303421
! Fit after  self-cal, rms=0.081953Jy  sigma=1.302670
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.324 x 7.042 at -2.772 degrees (North through East)
! Clean map  min=-0.0062828  max=0.47176 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        0.97     KP        1.01     
!   LA        0.96     MK        0.95     NL        1.03     OV        0.99     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        1.00     KP        1.02     
!   LA        0.98     MK        0.99     NL        1.06     OV        0.95     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.00     KP        1.01     
!   LA        0.98     MK        1.09     NL        1.08     OV        1.03     
!   PT        1.01     SC        1.07     
! 
! 
! Fit before self-cal, rms=0.081953Jy  sigma=1.302670
! Fit after  self-cal, rms=0.077483Jy  sigma=1.205639
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.339 mas, bmaj=7.093 mas, bpa=-3.02 degrees
! Estimated noise=0.414568 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110115 Jy
! Component: 100  -  total flux cleaned = 0.00174062 Jy
! Component: 150  -  total flux cleaned = 0.00167641 Jy
! Component: 200  -  total flux cleaned = 0.00161869 Jy
! Total flux subtracted in 200 components = 0.00161869 Jy
! Clean residual min=-0.004638 max=0.005296 Jy/beam
! Clean residual mean=0.000002 rms=0.001175 Jy/beam
! Combined flux in latest and established models = 0.727481 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 47 components and 0.727481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077214Jy  sigma=1.203834
! Fit after  self-cal, rms=0.077195Jy  sigma=1.203324
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077195Jy  sigma=1.203324
! Fit after  self-cal, rms=0.062122Jy  sigma=1.081864
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.341 mas, bmaj=7.099 mas, bpa=-3.041 degrees
! Estimated noise=0.415123 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000723786 Jy
! Component: 100  -  total flux cleaned = 0.00054913 Jy
! Component: 150  -  total flux cleaned = 0.000388602 Jy
! Component: 200  -  total flux cleaned = 0.000289802 Jy
! Total flux subtracted in 200 components = 0.000289802 Jy
! Clean residual min=-0.003349 max=0.002865 Jy/beam
! Clean residual mean=-0.000000 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.727771 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 53 components and 0.727771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062018Jy  sigma=1.079735
! Fit after  self-cal, rms=0.062005Jy  sigma=1.079526
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000249857 Jy
! Component: 100  -  total flux cleaned = -0.000299357 Jy
! Component: 150  -  total flux cleaned = -0.000345417 Jy
! Component: 200  -  total flux cleaned = -0.000390064 Jy
! Total flux subtracted in 200 components = -0.000390064 Jy
! Clean residual min=-0.003262 max=0.002818 Jy/beam
! Clean residual mean=-0.000000 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.727381 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 57 components and 0.727381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061939Jy  sigma=1.078231
! Fit after  self-cal, rms=0.061933Jy  sigma=1.078118
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061933Jy  sigma=1.078118
! Fit after  self-cal, rms=0.061262Jy  sigma=1.072179
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.342 mas, bmaj=7.099 mas, bpa=-3.003 degrees
! Estimated noise=0.414855 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000314319 Jy
! Component: 100  -  total flux cleaned = -0.000411317 Jy
! Component: 150  -  total flux cleaned = -0.000453381 Jy
! Component: 200  -  total flux cleaned = -0.000454645 Jy
! Total flux subtracted in 200 components = -0.000454645 Jy
! Clean residual min=-0.003063 max=0.002487 Jy/beam
! Clean residual mean=-0.000001 rms=0.000546 Jy/beam
! Combined flux in latest and established models = 0.726926 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 68 components and 0.726926 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061205Jy  sigma=1.070908
! Fit after  self-cal, rms=0.061200Jy  sigma=1.070842
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.89728e-05 Jy
! Component: 100  -  total flux cleaned = 7.5847e-06 Jy
! Component: 150  -  total flux cleaned = -7.22e-05 Jy
! Component: 200  -  total flux cleaned = -0.00011116 Jy
! Total flux subtracted in 200 components = -0.00011116 Jy
! Clean residual min=-0.002971 max=0.002447 Jy/beam
! Clean residual mean=-0.000001 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.726815 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 70 components and 0.726815 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061157Jy  sigma=1.069960
! Fit after  self-cal, rms=0.061155Jy  sigma=1.069922
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061155Jy  sigma=1.069922
! Fit after  self-cal, rms=0.061076Jy  sigma=1.069848
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.295 mas, bmaj=10.48 mas, bpa=-0.4742 degrees
! Estimated noise=0.546829 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000415526 Jy
! Component: 100  -  total flux cleaned = -0.000621784 Jy
! Component: 150  -  total flux cleaned = -0.000775011 Jy
! Component: 200  -  total flux cleaned = -0.000890493 Jy
! Total flux subtracted in 200 components = -0.000890493 Jy
! Clean residual min=-0.001882 max=0.001992 Jy/beam
! Clean residual mean=-0.000001 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.725924 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 77 components and 0.725924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061066Jy  sigma=1.069574
! Fit after  self-cal, rms=0.061057Jy  sigma=1.069398
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.57904e-05 Jy
! Component: 100  -  total flux cleaned = -8.5685e-05 Jy
! Component: 150  -  total flux cleaned = -0.000166821 Jy
! Component: 200  -  total flux cleaned = -0.000216373 Jy
! Total flux subtracted in 200 components = -0.000216373 Jy
! Clean residual min=-0.001869 max=0.001969 Jy/beam
! Clean residual mean=-0.000001 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.725708 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 81 components and 0.725708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061054Jy  sigma=1.069300
! Fit after  self-cal, rms=0.061043Jy  sigma=1.069089
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.343 mas, bmaj=7.095 mas, bpa=-2.937 degrees
! Estimated noise=0.414524 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.343 x 7.095 at -2.937 degrees (North through East)
! Clean map  min=-0.0020256  max=0.47706 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.859 mas, bmaj=6.427 mas, bpa=-4.24 degrees
! Estimated noise=0.554142 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.39365 Jy
! Component: 100  -  total flux cleaned = 0.549818 Jy
! Component: 150  -  total flux cleaned = 0.624823 Jy
! Component: 200  -  total flux cleaned = 0.665839 Jy
! Total flux subtracted in 200 components = 0.665839 Jy
! Clean residual min=-0.007256 max=0.020431 Jy/beam
! Clean residual mean=-0.000004 rms=0.002175 Jy/beam
! Combined flux in latest and established models = 0.665839 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.665839 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.343 mas, bmaj=7.095 mas, bpa=-2.937 degrees
! Estimated noise=0.414524 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0278697 Jy
! Component: 100  -  total flux cleaned = 0.0426667 Jy
! Component: 150  -  total flux cleaned = 0.0508751 Jy
! Component: 200  -  total flux cleaned = 0.0555897 Jy
! Total flux subtracted in 200 components = 0.0555897 Jy
! Clean residual min=-0.002305 max=0.002937 Jy/beam
! Clean residual mean=-0.000000 rms=0.000572 Jy/beam
! Combined flux in latest and established models = 0.721429 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 48 components and 0.721429 Jy
! Inverting map 
! Added new window around map position (4, -4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00298525 Jy
! Component: 100  -  total flux cleaned = 0.00340597 Jy
! Component: 150  -  total flux cleaned = 0.00347894 Jy
! Component: 200  -  total flux cleaned = 0.0035438 Jy
! Total flux subtracted in 200 components = 0.0035438 Jy
! Clean residual min=-0.002037 max=0.002036 Jy/beam
! Clean residual mean=-0.000000 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.724973 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 66 components and 0.724973 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.295 mas, bmaj=10.48 mas, bpa=-0.4742 degrees
! Estimated noise=0.546829 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000252316 Jy
! Component: 100  -  total flux cleaned = -6.57691e-06 Jy
! Component: 150  -  total flux cleaned = -0.000142211 Jy
! Component: 200  -  total flux cleaned = -0.000198703 Jy
! Total flux subtracted in 200 components = -0.000198703 Jy
! Clean residual min=-0.001787 max=0.001952 Jy/beam
! Clean residual mean=-0.000001 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.724774 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.07866e-05 Jy
! Component: 100  -  total flux cleaned = -9.52857e-05 Jy
! Component: 150  -  total flux cleaned = -0.000121732 Jy
! Component: 200  -  total flux cleaned = -0.000158821 Jy
! Total flux subtracted in 200 components = -0.000158821 Jy
! Clean residual min=-0.001764 max=0.001930 Jy/beam
! Clean residual mean=-0.000001 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.724615 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 89 components and 0.724615 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.343 mas, bmaj=7.095 mas, bpa=-2.937 degrees
! Estimated noise=0.414524 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.16436e-05 Jy
! Component: 100  -  total flux cleaned = -0.000103525 Jy
! Component: 150  -  total flux cleaned = -0.000152772 Jy
! Component: 200  -  total flux cleaned = -0.000104998 Jy
! Total flux subtracted in 200 components = -0.000104998 Jy
! Clean residual min=-0.001849 max=0.001994 Jy/beam
! Clean residual mean=-0.000001 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.72451 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 101 components and 0.72451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060862Jy  sigma=1.065550
! Fit after  self-cal, rms=0.060838Jy  sigma=1.065178
wmodel J1311+1417_S_map.mod
! Writing 101 model components to file: J1311+1417_S_map.mod
wobs   J1311+1417_S_uvs.fits
! Writing UV FITS file: J1311+1417_S_uvs.fits
wwins  J1311+1417_S_map.win
! wwins: Wrote 2 windows to J1311+1417_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000523163 Jy
! Component: 100  -  total flux cleaned = 0.000822217 Jy
! Component: 150  -  total flux cleaned = 0.000980746 Jy
! Component: 200  -  total flux cleaned = 0.000980592 Jy
! Component: 250  -  total flux cleaned = 0.00103961 Jy
! Component: 300  -  total flux cleaned = 0.00112598 Jy
! Component: 350  -  total flux cleaned = 0.00126571 Jy
! Component: 400  -  total flux cleaned = 0.00137427 Jy
! Component: 450  -  total flux cleaned = 0.00145447 Jy
! Component: 500  -  total flux cleaned = 0.00161191 Jy
! Component: 550  -  total flux cleaned = 0.00179164 Jy
! Component: 600  -  total flux cleaned = 0.00189206 Jy
! Component: 650  -  total flux cleaned = 0.00199097 Jy
! Component: 700  -  total flux cleaned = 0.00206474 Jy
! Component: 750  -  total flux cleaned = 0.0022093 Jy
! Component: 800  -  total flux cleaned = 0.00225613 Jy
! Component: 850  -  total flux cleaned = 0.00237237 Jy
! Component: 900  -  total flux cleaned = 0.00241801 Jy
! Component: 950  -  total flux cleaned = 0.00250824 Jy
! Component: 1000  -  total flux cleaned = 0.00255298 Jy
! Component: 1050  -  total flux cleaned = 0.00255323 Jy
! Component: 1100  -  total flux cleaned = 0.00266144 Jy
! Component: 1150  -  total flux cleaned = 0.00264033 Jy
! Component: 1200  -  total flux cleaned = 0.00272422 Jy
! Component: 1250  -  total flux cleaned = 0.00274493 Jy
! Component: 1300  -  total flux cleaned = 0.00280666 Jy
! Component: 1350  -  total flux cleaned = 0.00286731 Jy
! Component: 1400  -  total flux cleaned = 0.00296722 Jy
! Component: 1450  -  total flux cleaned = 0.00300676 Jy
! Component: 1500  -  total flux cleaned = 0.00306517 Jy
! Component: 1550  -  total flux cleaned = 0.00316127 Jy
! Component: 1600  -  total flux cleaned = 0.00321837 Jy
! Component: 1650  -  total flux cleaned = 0.0032375 Jy
! Component: 1700  -  total flux cleaned = 0.00333085 Jy
! Component: 1750  -  total flux cleaned = 0.00333067 Jy
! Component: 1800  -  total flux cleaned = 0.00334887 Jy
! Component: 1850  -  total flux cleaned = 0.00340293 Jy
! Component: 1900  -  total flux cleaned = 0.00349163 Jy
! Component: 1950  -  total flux cleaned = 0.00347406 Jy
! Component: 2000  -  total flux cleaned = 0.00350923 Jy
! Component: 2050  -  total flux cleaned = 0.00356097 Jy
! Component: 2100  -  total flux cleaned = 0.00357808 Jy
! Component: 2150  -  total flux cleaned = 0.00354438 Jy
! Component: 2200  -  total flux cleaned = 0.00362801 Jy
! Component: 2250  -  total flux cleaned = 0.00367755 Jy
! Component: 2300  -  total flux cleaned = 0.00369379 Jy
! Component: 2350  -  total flux cleaned = 0.00369398 Jy
! Component: 2400  -  total flux cleaned = 0.00372615 Jy
! Component: 2450  -  total flux cleaned = 0.00372605 Jy
! Component: 2500  -  total flux cleaned = 0.00374168 Jy
! Component: 2550  -  total flux cleaned = 0.00366372 Jy
! Component: 2600  -  total flux cleaned = 0.00367932 Jy
! Component: 2650  -  total flux cleaned = 0.00375608 Jy
! Component: 2700  -  total flux cleaned = 0.00374097 Jy
! Component: 2750  -  total flux cleaned = 0.00375623 Jy
! Component: 2800  -  total flux cleaned = 0.00377108 Jy
! Component: 2850  -  total flux cleaned = 0.00366725 Jy
! Component: 2900  -  total flux cleaned = 0.00366744 Jy
! Component: 2950  -  total flux cleaned = 0.00365287 Jy
! Component: 3000  -  total flux cleaned = 0.00365282 Jy
! Component: 3050  -  total flux cleaned = 0.00363849 Jy
! Component: 3100  -  total flux cleaned = 0.00366695 Jy
! Component: 3150  -  total flux cleaned = 0.00361036 Jy
! Component: 3200  -  total flux cleaned = 0.00359646 Jy
! Component: 3250  -  total flux cleaned = 0.00362436 Jy
! Component: 3300  -  total flux cleaned = 0.00359679 Jy
! Component: 3350  -  total flux cleaned = 0.00356955 Jy
! Component: 3400  -  total flux cleaned = 0.00356963 Jy
! Component: 3450  -  total flux cleaned = 0.00358318 Jy
! Component: 3500  -  total flux cleaned = 0.00355643 Jy
! Component: 3550  -  total flux cleaned = 0.00356979 Jy
! Component: 3600  -  total flux cleaned = 0.00353046 Jy
! Component: 3650  -  total flux cleaned = 0.00350439 Jy
! Component: 3700  -  total flux cleaned = 0.00356904 Jy
! Component: 3750  -  total flux cleaned = 0.00356883 Jy
! Component: 3800  -  total flux cleaned = 0.00349229 Jy
! Component: 3850  -  total flux cleaned = 0.00355548 Jy
! Component: 3900  -  total flux cleaned = 0.00349264 Jy
! Component: 3950  -  total flux cleaned = 0.00345529 Jy
! Component: 4000  -  total flux cleaned = 0.00343052 Jy
! Component: 4050  -  total flux cleaned = 0.00345512 Jy
! Total flux subtracted in 4096 components = 0.00346732 Jy
! Clean residual min=-0.000719 max=0.000811 Jy/beam
! Clean residual mean=-0.000001 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.727978 Jy
keep
! Adding 289 model components to the UV plane model.
! The established model now contains 390 components and 0.727977 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1311+1417_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.343 x 7.095 at -2.937 degrees (North through East)
! Clean map  min=-0.0011862  max=0.47582 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1311+1417_S_map.fits
wmodel /vlbi/uf001/uva//J1311+1417_S_map.mod
! Writing 390 model components to file: /vlbi/uf001/uva//J1311+1417_S_map.mod
wobs   /vlbi/uf001/uva//J1311+1417_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1311+1417_S_uvs.fits
wwins  /vlbi/uf001/uva//J1311+1417_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J1311+1417_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.475817 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000222249 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.140127 0.140127 0.280253 0.560506 1.12101 2.24202 4.48405 8.9681 17.9362 35.8724 71.7448
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.475 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2140.92 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1311+1417_S_dfm.log closed on Mon Jan 14 02:14:34 2019