! Started logfile: /vlbi/uf001/uvm//J1307+7649_X_a_dfm.log on Sun Jan 13 21:37:42 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1307+7649_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1307+7649_X_a_uvm.fits ! AN table 1: 76 integrations on 28 of 28 possible baselines. ! AN table 2: 157 integrations on 36 of 36 possible baselines. ! AN table 3: 74 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.659524 visibilities/baseline/integration-bin. ! Found source: J1307+7649 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 73872 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1307+7649_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! A total of 729 telescope corrections were flagged in sub-array 2. ! A total of 50 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! A total of 729 telescope corrections were flagged in sub-array 2. ! A total of 50 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! A total of 729 telescope corrections were flagged in sub-array 2. ! A total of 50 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! A total of 729 telescope corrections were flagged in sub-array 2. ! A total of 50 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 32 telescope corrections were flagged in sub-array 1. ! A total of 729 telescope corrections were flagged in sub-array 2. ! A total of 50 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 32 telescope corrections were flagged in sub-array 1. ! A total of 729 telescope corrections were flagged in sub-array 2. ! A total of 50 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 32 telescope corrections were flagged in sub-array 1. ! A total of 729 telescope corrections were flagged in sub-array 2. ! A total of 50 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 32 telescope corrections were flagged in sub-array 1. ! A total of 729 telescope corrections were flagged in sub-array 2. ! A total of 50 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 32 telescope corrections were flagged in sub-array 1. ! A total of 729 telescope corrections were flagged in sub-array 2. ! A total of 50 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 32 telescope corrections were flagged in sub-array 1. ! A total of 729 telescope corrections were flagged in sub-array 2. ! A total of 50 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 32 telescope corrections were flagged in sub-array 1. ! A total of 729 telescope corrections were flagged in sub-array 2. ! A total of 50 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 32 telescope corrections were flagged in sub-array 1. ! A total of 729 telescope corrections were flagged in sub-array 2. ! A total of 50 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.001591Jy sigma=24.117312 ! Fit after self-cal, rms=0.971065Jy sigma=23.479283 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.053 mas, bmaj=1.158 mas, bpa=-67.27 degrees ! Estimated noise=0.289378 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209923 Jy ! Component: 100 - total flux cleaned = 0.0258527 Jy ! Total flux subtracted in 100 components = 0.0258527 Jy ! Clean residual min=-0.002129 max=0.002956 Jy/beam ! Clean residual mean=-0.000001 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.0258527 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0258527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055488Jy sigma=1.272146 ! Fit after self-cal, rms=0.053947Jy sigma=1.233944 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00393296 Jy ! Component: 100 - total flux cleaned = 0.0057355 Jy ! Total flux subtracted in 100 components = 0.0057355 Jy ! Clean residual min=-0.001880 max=0.002815 Jy/beam ! Clean residual mean=-0.000001 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.0315882 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 14 components and 0.0315882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053317Jy sigma=1.219472 ! Fit after self-cal, rms=0.053306Jy sigma=1.219139 ! Inverting map ! Added new window around map position (-0.8, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282362 Jy ! Component: 100 - total flux cleaned = 0.00453137 Jy ! Total flux subtracted in 100 components = 0.00453137 Jy ! Clean residual min=-0.001895 max=0.002701 Jy/beam ! Clean residual mean=-0.000001 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.0361196 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 21 components and 0.0361196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052970Jy sigma=1.211049 ! Fit after self-cal, rms=0.052881Jy sigma=1.209363 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.425 mas, bmaj=1.638 mas, bpa=-82.1 degrees ! Estimated noise=0.111394 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00562882 Jy ! Component: 100 - total flux cleaned = 0.00972451 Jy ! Component: 150 - total flux cleaned = 0.0128937 Jy ! Component: 200 - total flux cleaned = 0.0153811 Jy ! Total flux subtracted in 200 components = 0.0153811 Jy ! Clean residual min=-0.001859 max=0.003278 Jy/beam ! Clean residual mean=-0.000003 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.0515008 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 79 components and 0.0515008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052056Jy sigma=1.188875 ! Fit after self-cal, rms=0.051842Jy sigma=1.184796 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.425 x 1.638 at -82.1 degrees (North through East) ! Clean map min=-0.0018024 max=0.030604 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.34 FD 1.10 KP 0.94 LA 0.90 ! MK 1.21 NL 1.12 OV 1.04 PT 0.78 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.35 FD 1.10 HN 1.00 KP 0.90 ! LA 0.96 NL 1.26 OV 1.03 PT 0.81 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.22 FD 1.28 KP 1.00 LA 0.69 ! MK 1.33 NL 1.38 PT 0.70 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.13 KP 0.96 LA 0.94 ! MK 1.25 NL 1.15 OV 1.09 PT 0.78 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.20 FD 1.06 HN 0.91 KP 0.97 ! LA 0.97 NL 1.30 OV 1.08 PT 0.78 ! SC 1.10 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 1.21 KP 1.13 LA 0.74 ! MK 1.13 NL 1.41 PT 0.70 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.38 FD 1.20 KP 0.96 LA 0.92 ! MK 1.22 NL 1.17 OV 1.10 PT 0.75 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.24 FD 1.06 HN 1.10 KP 0.91 ! LA 0.98 NL 1.17 OV 1.06 PT 0.80 ! SC 1.08 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.15 FD 1.22 KP 1.14 LA 0.65 ! MK 1.20 NL 1.63 PT 0.73 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 1.13 KP 0.94 LA 0.91 ! MK 1.18 NL 1.28 OV 1.15 PT 0.73 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.22 FD 1.09 HN 0.87 KP 0.98 ! LA 0.94 NL 1.21 OV 1.07 PT 0.79 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.12 FD 1.16 KP 1.11 LA 0.73 ! MK 1.06 NL 1.32 PT 0.68 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 FD 1.18 KP 0.96 LA 0.88 ! MK 0.99 NL 1.12 OV 1.11 PT 0.80 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.15 FD 1.07 HN 0.89 KP 0.98 ! LA 0.96 NL 1.15 OV 1.14 PT 0.82 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.22 KP 1.21 LA 0.69 ! MK 1.23 NL 1.38 PT 0.73 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.15 KP 1.07 LA 0.85 ! MK 1.03 NL 1.04 OV 1.25 PT 0.77 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.28 FD 1.05 HN 0.95 KP 0.97 ! LA 0.95 NL 1.04 OV 1.10 PT 0.83 ! SC 0.89 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.17 FD 1.29 KP 1.07 LA 0.74 ! MK 1.12 NL 1.35 PT 0.67 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.19 KP 1.07 LA 0.92 ! MK 1.03 NL 1.15 OV 1.19 PT 0.79 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.18 FD 1.08 HN 0.90 KP 1.09 ! LA 0.89 NL 1.16 OV 1.06 PT 0.82 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.20 KP 1.10 LA 0.71 ! MK 1.08 NL 1.33 PT 0.74 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.07 KP 0.94 LA 0.92 ! MK 1.08 NL 1.15 OV 1.16 PT 0.77 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 1.08 HN 0.80 KP 1.06 ! LA 0.94 NL 1.03 OV 0.99 PT 0.88 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.10 FD 1.19 KP 1.15 LA 0.71 ! MK 1.03 NL 1.32 PT 0.73 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.11 KP 1.14 LA 0.90 ! MK 0.93 NL 1.17 OV 1.18 PT 0.74 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.08 HN 0.85 KP 0.99 ! LA 0.90 NL 1.02 OV 1.00 PT 0.88 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.14 KP 1.03 LA 0.73 ! MK 1.14 NL 1.25 PT 0.76 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.11 KP 0.97 LA 0.98 ! MK 1.00 NL 1.16 OV 1.13 PT 0.76 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.15 FD 1.10 HN 0.87 KP 1.00 ! LA 0.89 NL 0.99 OV 1.10 PT 0.79 ! SC 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.17 KP 1.15 LA 0.69 ! MK 1.01 NL 1.31 PT 0.73 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.13 KP 0.92 LA 0.93 ! MK 0.81 NL 0.98 OV 1.13 PT 0.73 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.12 FD 1.06 HN 0.72 KP 0.99 ! LA 0.97 NL 0.97 OV 0.97 PT 0.91 ! SC 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.08 KP 1.05 LA 0.83 ! MK 0.85 NL 1.17 PT 0.70 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.12 KP 1.03 LA 0.95 ! MK 0.82 NL 0.99 OV 1.10 PT 0.81 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.03 HN 0.70 KP 1.00 ! LA 1.00 NL 0.93 OV 0.93 PT 0.80 ! SC 0.88 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.91 FD 0.99 KP 0.98 LA 0.80 ! MK 0.83 NL 1.06 PT 0.74 ! ! ! Fit before self-cal, rms=0.051842Jy sigma=1.184796 ! Fit after self-cal, rms=0.051904Jy sigma=1.167414 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.448 mas, bmaj=1.658 mas, bpa=-85.63 degrees ! Estimated noise=0.110809 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.4, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024234 Jy ! Component: 100 - total flux cleaned = 0.00402483 Jy ! Component: 150 - total flux cleaned = 0.00523803 Jy ! Component: 200 - total flux cleaned = 0.00618375 Jy ! Total flux subtracted in 200 components = 0.00618375 Jy ! Clean residual min=-0.001184 max=0.001546 Jy/beam ! Clean residual mean=-0.000005 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.0576845 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 115 components and 0.0576845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051776Jy sigma=1.163369 ! Fit after self-cal, rms=0.052035Jy sigma=1.158266 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052035Jy sigma=1.158266 ! Fit after self-cal, rms=0.053758Jy sigma=1.153140 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.438 mas, bmaj=1.651 mas, bpa=-87.86 degrees ! Estimated noise=0.11114 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127414 Jy ! Component: 100 - total flux cleaned = 0.00202142 Jy ! Component: 150 - total flux cleaned = 0.00228734 Jy ! Component: 200 - total flux cleaned = 0.00235559 Jy ! Total flux subtracted in 200 components = 0.00235559 Jy ! Clean residual min=-0.000956 max=0.001101 Jy/beam ! Clean residual mean=-0.000003 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.0600401 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 131 components and 0.0600401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053720Jy sigma=1.152047 ! Fit after self-cal, rms=0.053846Jy sigma=1.150588 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00080904 Jy ! Component: 100 - total flux cleaned = 0.000974635 Jy ! Component: 150 - total flux cleaned = 0.00101512 Jy ! Component: 200 - total flux cleaned = 0.00106682 Jy ! Total flux subtracted in 200 components = 0.00106682 Jy ! Clean residual min=-0.001081 max=0.001017 Jy/beam ! Clean residual mean=-0.000003 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.0611069 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 138 components and 0.0611069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053827Jy sigma=1.150153 ! Fit after self-cal, rms=0.053811Jy sigma=1.149949 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053811Jy sigma=1.149949 ! Fit after self-cal, rms=0.053737Jy sigma=1.149456 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.428 mas, bmaj=1.645 mas, bpa=-88.87 degrees ! Estimated noise=0.110346 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000802822 Jy ! Component: 100 - total flux cleaned = 0.00116484 Jy ! Component: 150 - total flux cleaned = 0.00127628 Jy ! Component: 200 - total flux cleaned = 0.00134253 Jy ! Total flux subtracted in 200 components = 0.00134253 Jy ! Clean residual min=-0.000878 max=0.000942 Jy/beam ! Clean residual mean=-0.000002 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.0624495 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 146 components and 0.0624495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053720Jy sigma=1.148975 ! Fit after self-cal, rms=0.053721Jy sigma=1.148669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000458112 Jy ! Component: 100 - total flux cleaned = 0.000475418 Jy ! Component: 150 - total flux cleaned = 0.000507359 Jy ! Component: 200 - total flux cleaned = 0.000535753 Jy ! Total flux subtracted in 200 components = 0.000535753 Jy ! Clean residual min=-0.000962 max=0.000959 Jy/beam ! Clean residual mean=-0.000002 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.0629852 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 149 components and 0.0629852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053710Jy sigma=1.148409 ! Fit after self-cal, rms=0.053695Jy sigma=1.148320 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053695Jy sigma=1.148320 ! Fit after self-cal, rms=0.053335Jy sigma=1.148123 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.586 mas, bmaj=3.212 mas, bpa=88.77 degrees ! Estimated noise=0.124524 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000708059 Jy ! Component: 100 - total flux cleaned = 0.00115786 Jy ! Component: 150 - total flux cleaned = 0.00133388 Jy ! Component: 200 - total flux cleaned = 0.00139081 Jy ! Total flux subtracted in 200 components = 0.00139081 Jy ! Clean residual min=-0.001019 max=0.001281 Jy/beam ! Clean residual mean=-0.000003 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.064376 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 169 components and 0.064376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053325Jy sigma=1.147889 ! Fit after self-cal, rms=0.053319Jy sigma=1.147696 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000291745 Jy ! Component: 100 - total flux cleaned = 0.000317108 Jy ! Component: 150 - total flux cleaned = 0.000349912 Jy ! Component: 200 - total flux cleaned = 0.000369787 Jy ! Total flux subtracted in 200 components = 0.000369787 Jy ! Clean residual min=-0.001024 max=0.001287 Jy/beam ! Clean residual mean=-0.000003 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.0647458 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 174 components and 0.0647458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053313Jy sigma=1.147589 ! Fit after self-cal, rms=0.053303Jy sigma=1.147509 ! Inverting map ! Added new window around map position (3.2, 29.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111148 Jy ! Component: 100 - total flux cleaned = 0.00131199 Jy ! Component: 150 - total flux cleaned = 0.00149652 Jy ! Component: 200 - total flux cleaned = 0.0016413 Jy ! Total flux subtracted in 200 components = 0.0016413 Jy ! Clean residual min=-0.001051 max=0.001122 Jy/beam ! Clean residual mean=-0.000003 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.0663871 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 206 components and 0.0663871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053283Jy sigma=1.147097 ! Fit after self-cal, rms=0.053261Jy sigma=1.146840 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.42 mas, bmaj=1.644 mas, bpa=-89.38 degrees ! Estimated noise=0.109588 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.42 x 1.644 at -89.38 degrees (North through East) ! Clean map min=-0.0010191 max=0.029118 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.052 mas, bmaj=1.14 mas, bpa=-78 degrees ! Estimated noise=0.283349 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215155 Jy ! Component: 100 - total flux cleaned = 0.0276993 Jy ! Component: 150 - total flux cleaned = 0.0320754 Jy ! Component: 200 - total flux cleaned = 0.0357124 Jy ! Total flux subtracted in 200 components = 0.0357124 Jy ! Clean residual min=-0.001883 max=0.002565 Jy/beam ! Clean residual mean=-0.000002 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.0357124 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0357124 Jy ! Inverting map and beam ! Estimated beam: bmin=1.42 mas, bmaj=1.644 mas, bpa=-89.38 degrees ! Estimated noise=0.109588 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00624135 Jy ! Component: 100 - total flux cleaned = 0.0105807 Jy ! Component: 150 - total flux cleaned = 0.0139904 Jy ! Component: 200 - total flux cleaned = 0.0167271 Jy ! Total flux subtracted in 200 components = 0.0167271 Jy ! Clean residual min=-0.001232 max=0.002152 Jy/beam ! Clean residual mean=-0.000003 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.0524395 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 75 components and 0.0524395 Jy ! Inverting map ! Added new window around map position (1.4, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232898 Jy ! Component: 100 - total flux cleaned = 0.00415211 Jy ! Component: 150 - total flux cleaned = 0.00567102 Jy ! Component: 200 - total flux cleaned = 0.0069599 Jy ! Total flux subtracted in 200 components = 0.0069599 Jy ! Clean residual min=-0.000982 max=0.001111 Jy/beam ! Clean residual mean=-0.000003 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.0593994 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 111 components and 0.0593994 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.586 mas, bmaj=3.212 mas, bpa=88.77 degrees ! Estimated noise=0.124524 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159969 Jy ! Component: 100 - total flux cleaned = 0.00283168 Jy ! Component: 150 - total flux cleaned = 0.00384415 Jy ! Component: 200 - total flux cleaned = 0.00453114 Jy ! Total flux subtracted in 200 components = 0.00453114 Jy ! Clean residual min=-0.000972 max=0.001180 Jy/beam ! Clean residual mean=-0.000003 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.0639305 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000366053 Jy ! Component: 100 - total flux cleaned = 0.000616106 Jy ! Component: 150 - total flux cleaned = 0.000900947 Jy ! Component: 200 - total flux cleaned = 0.00116547 Jy ! Total flux subtracted in 200 components = 0.00116547 Jy ! Clean residual min=-0.000945 max=0.001136 Jy/beam ! Clean residual mean=-0.000003 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 0.065096 Jy ! Adding 103 model components to the UV plane model. ! The established model now contains 197 components and 0.065096 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.42 mas, bmaj=1.644 mas, bpa=-89.38 degrees ! Estimated noise=0.109588 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000126777 Jy ! Component: 100 - total flux cleaned = 0.000260533 Jy ! Component: 150 - total flux cleaned = 0.0003632 Jy ! Component: 200 - total flux cleaned = 0.00044036 Jy ! Total flux subtracted in 200 components = 0.00044036 Jy ! Clean residual min=-0.000854 max=0.000929 Jy/beam ! Clean residual mean=-0.000002 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.0655364 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 227 components and 0.0655364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053248Jy sigma=1.146560 ! Fit after self-cal, rms=0.053219Jy sigma=1.146152 wmodel J1307+7649_X_a_map.mod ! Writing 227 model components to file: J1307+7649_X_a_map.mod wobs J1307+7649_X_a_uvs.fits ! Writing UV FITS file: J1307+7649_X_a_uvs.fits wwins J1307+7649_X_a_map.win ! wwins: Wrote 6 windows to J1307+7649_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.08341e-05 Jy ! Component: 100 - total flux cleaned = 0.000111689 Jy ! Component: 150 - total flux cleaned = 8.30533e-05 Jy ! Component: 200 - total flux cleaned = 4.14127e-05 Jy ! Component: 250 - total flux cleaned = 1.47484e-05 Jy ! Component: 300 - total flux cleaned = 2.76534e-05 Jy ! Component: 350 - total flux cleaned = 5.30433e-05 Jy ! Component: 400 - total flux cleaned = 0.000102477 Jy ! Component: 450 - total flux cleaned = 0.000138331 Jy ! Component: 500 - total flux cleaned = 0.000150117 Jy ! Component: 550 - total flux cleaned = 0.000208362 Jy ! Component: 600 - total flux cleaned = 0.000231307 Jy ! Component: 650 - total flux cleaned = 0.00022001 Jy ! Component: 700 - total flux cleaned = 0.000253571 Jy ! Component: 750 - total flux cleaned = 0.000275615 Jy ! Component: 800 - total flux cleaned = 0.000297137 Jy ! Component: 850 - total flux cleaned = 0.000307671 Jy ! Component: 900 - total flux cleaned = 0.000286424 Jy ! Component: 950 - total flux cleaned = 0.000265757 Jy ! Component: 1000 - total flux cleaned = 0.00027633 Jy ! Component: 1050 - total flux cleaned = 0.00029675 Jy ! Component: 1100 - total flux cleaned = 0.000316688 Jy ! Component: 1150 - total flux cleaned = 0.000286705 Jy ! Component: 1200 - total flux cleaned = 0.000306336 Jy ! Component: 1250 - total flux cleaned = 0.000296583 Jy ! Component: 1300 - total flux cleaned = 0.000315986 Jy ! Component: 1350 - total flux cleaned = 0.00033504 Jy ! Component: 1400 - total flux cleaned = 0.000353992 Jy ! Component: 1450 - total flux cleaned = 0.000372556 Jy ! Component: 1500 - total flux cleaned = 0.000354002 Jy ! Component: 1550 - total flux cleaned = 0.000381517 Jy ! Component: 1600 - total flux cleaned = 0.000399666 Jy ! Component: 1650 - total flux cleaned = 0.000408518 Jy ! Component: 1700 - total flux cleaned = 0.000408484 Jy ! Component: 1750 - total flux cleaned = 0.000382102 Jy ! Component: 1800 - total flux cleaned = 0.000373553 Jy ! Component: 1850 - total flux cleaned = 0.000399729 Jy ! Component: 1900 - total flux cleaned = 0.000425587 Jy ! Component: 1950 - total flux cleaned = 0.00035715 Jy ! Component: 2000 - total flux cleaned = 0.00039132 Jy ! Component: 2050 - total flux cleaned = 0.000382839 Jy ! Component: 2100 - total flux cleaned = 0.000399562 Jy ! Component: 2150 - total flux cleaned = 0.000357993 Jy ! Component: 2200 - total flux cleaned = 0.000382733 Jy ! Component: 2250 - total flux cleaned = 0.000366348 Jy ! Component: 2300 - total flux cleaned = 0.000366416 Jy ! Component: 2350 - total flux cleaned = 0.000334211 Jy ! Component: 2400 - total flux cleaned = 0.000350262 Jy ! Component: 2450 - total flux cleaned = 0.000334381 Jy ! Component: 2500 - total flux cleaned = 0.000350142 Jy ! Component: 2550 - total flux cleaned = 0.000334419 Jy ! Component: 2600 - total flux cleaned = 0.000326623 Jy ! Component: 2650 - total flux cleaned = 0.000326566 Jy ! Component: 2700 - total flux cleaned = 0.000318912 Jy ! Component: 2750 - total flux cleaned = 0.000273147 Jy ! Component: 2800 - total flux cleaned = 0.000295836 Jy ! Component: 2850 - total flux cleaned = 0.000273248 Jy ! Component: 2900 - total flux cleaned = 0.000250993 Jy ! Component: 2950 - total flux cleaned = 0.000295503 Jy ! Component: 3000 - total flux cleaned = 0.000273376 Jy ! Component: 3050 - total flux cleaned = 0.000309919 Jy ! Component: 3100 - total flux cleaned = 0.000295335 Jy ! Component: 3150 - total flux cleaned = 0.000324334 Jy ! Component: 3200 - total flux cleaned = 0.000302757 Jy ! Component: 3250 - total flux cleaned = 0.000317116 Jy ! Component: 3300 - total flux cleaned = 0.000324327 Jy ! Component: 3350 - total flux cleaned = 0.000338523 Jy ! Component: 3400 - total flux cleaned = 0.000359596 Jy ! Component: 3450 - total flux cleaned = 0.000366572 Jy ! Component: 3500 - total flux cleaned = 0.000366601 Jy ! Component: 3550 - total flux cleaned = 0.000352754 Jy ! Component: 3600 - total flux cleaned = 0.000359647 Jy ! Component: 3650 - total flux cleaned = 0.000332264 Jy ! Component: 3700 - total flux cleaned = 0.00033224 Jy ! Component: 3750 - total flux cleaned = 0.000372827 Jy ! Component: 3800 - total flux cleaned = 0.000366068 Jy ! Component: 3850 - total flux cleaned = 0.000345945 Jy ! Component: 3900 - total flux cleaned = 0.000379214 Jy ! Component: 3950 - total flux cleaned = 0.0003792 Jy ! Component: 4000 - total flux cleaned = 0.00038585 Jy ! Component: 4050 - total flux cleaned = 0.000379262 Jy ! Total flux subtracted in 4096 components = 0.000359676 Jy ! Clean residual min=-0.000416 max=0.000436 Jy/beam ! Clean residual mean=-0.000001 rms=0.000128 Jy/beam ! Combined flux in latest and established models = 0.065896 Jy keep ! Adding 363 model components to the UV plane model. ! The established model now contains 590 components and 0.065896 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1307+7649_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.42 x 1.644 at -89.38 degrees (North through East) ! Clean map min=-0.00077467 max=0.029118 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1307+7649_X_a_map.fits wmodel /vlbi/uf001/uvm//J1307+7649_X_a_map.mod ! Writing 590 model components to file: /vlbi/uf001/uvm//J1307+7649_X_a_map.mod wobs /vlbi/uf001/uvm//J1307+7649_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1307+7649_X_a_uvs.fits wwins /vlbi/uf001/uvm//J1307+7649_X_a_map.win ! wwins: Wrote 7 windows to /vlbi/uf001/uvm//J1307+7649_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0291178 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000126675 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.30513 1.30513 2.61025 5.22051 10.441 20.882 41.7641 83.5281 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.029 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 229.862 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1307+7649_X_a_dfm.log closed on Sun Jan 13 21:37:51 2019