! Started logfile: /vlbi/uf001/uva//J1305-3132_S_dfm.log on Mon Jan 14 02:11:45 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1305-3132_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1305-3132_S_uva.fits
! AN table 1: 38 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.884795 visibilities/baseline/integration-bin.
! Found source: J1305-3132
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4539 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1305-3132_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014216Jy  sigma=16.583215
! Fit after  self-cal, rms=0.905926Jy  sigma=14.744204
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.715 mas, bmaj=8.161 mas, bpa=-3.056 degrees
! Estimated noise=0.907563 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0755776 Jy
! Component: 100  -  total flux cleaned = 0.0933473 Jy
! Total flux subtracted in 100 components = 0.0933473 Jy
! Clean residual min=-0.006742 max=0.009198 Jy/beam
! Clean residual mean=0.000002 rms=0.001519 Jy/beam
! Combined flux in latest and established models = 0.0933473 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0933473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084034Jy  sigma=1.284798
! Fit after  self-cal, rms=0.083462Jy  sigma=1.278162
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.217 mas, bmaj=9.547 mas, bpa=-1.84 degrees
! Estimated noise=0.6854 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, -7.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00954403 Jy
! Component: 100  -  total flux cleaned = 0.0145073 Jy
! Component: 150  -  total flux cleaned = 0.0174528 Jy
! Component: 200  -  total flux cleaned = 0.0186151 Jy
! Total flux subtracted in 200 components = 0.0186151 Jy
! Clean residual min=-0.004812 max=0.004791 Jy/beam
! Clean residual mean=-0.000024 rms=0.001096 Jy/beam
! Combined flux in latest and established models = 0.111962 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 41 components and 0.111962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082549Jy  sigma=1.257142
! Fit after  self-cal, rms=0.082525Jy  sigma=1.255927
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.217 x 9.547 at -1.84 degrees (North through East)
! Clean map  min=-0.0043156  max=0.09474 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.94     HN        1.14     KP        0.99     
!   LA        0.90     MK        0.99     NL        1.08     OV        0.98     
!   PT        1.00     SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.90     HN        1.17     KP        1.05     
!   LA        0.93     MK        1.03     NL        1.04     OV        0.95     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.92     HN        1.11     KP        1.04     
!   LA        0.92     MK        1.05     NL        1.13     OV        0.98     
!   PT        0.98     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.082525Jy  sigma=1.255927
! Fit after  self-cal, rms=0.086391Jy  sigma=1.246768
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.248 mas, bmaj=9.595 mas, bpa=-1.387 degrees
! Estimated noise=0.686673 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000900621 Jy
! Component: 100  -  total flux cleaned = -0.00117138 Jy
! Component: 150  -  total flux cleaned = -0.00135105 Jy
! Component: 200  -  total flux cleaned = -0.00142934 Jy
! Total flux subtracted in 200 components = -0.00142934 Jy
! Clean residual min=-0.003300 max=0.003342 Jy/beam
! Clean residual mean=-0.000010 rms=0.000843 Jy/beam
! Combined flux in latest and established models = 0.110533 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 71 components and 0.110533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086322Jy  sigma=1.245834
! Fit after  self-cal, rms=0.086476Jy  sigma=1.245469
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086476Jy  sigma=1.245469
! Fit after  self-cal, rms=0.086850Jy  sigma=1.245384
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.255 mas, bmaj=9.612 mas, bpa=-1.335 degrees
! Estimated noise=0.68586 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000842885 Jy
! Component: 100  -  total flux cleaned = -0.000920782 Jy
! Component: 150  -  total flux cleaned = -0.000922091 Jy
! Component: 200  -  total flux cleaned = -0.000923327 Jy
! Total flux subtracted in 200 components = -0.000923327 Jy
! Clean residual min=-0.003280 max=0.003369 Jy/beam
! Clean residual mean=-0.000010 rms=0.000836 Jy/beam
! Combined flux in latest and established models = 0.10961 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 86 components and 0.10961 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086812Jy  sigma=1.244977
! Fit after  self-cal, rms=0.086825Jy  sigma=1.244938
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000182784 Jy
! Component: 100  -  total flux cleaned = -0.000183257 Jy
! Component: 150  -  total flux cleaned = -0.000182611 Jy
! Component: 200  -  total flux cleaned = -0.000155664 Jy
! Total flux subtracted in 200 components = -0.000155664 Jy
! Clean residual min=-0.003271 max=0.003358 Jy/beam
! Clean residual mean=-0.000010 rms=0.000832 Jy/beam
! Combined flux in latest and established models = 0.109454 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 93 components and 0.109454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086802Jy  sigma=1.244712
! Fit after  self-cal, rms=0.086802Jy  sigma=1.244698
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086802Jy  sigma=1.244698
! Fit after  self-cal, rms=0.087787Jy  sigma=1.242009
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.262 mas, bmaj=9.609 mas, bpa=-1.26 degrees
! Estimated noise=0.684336 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000226864 Jy
! Component: 100  -  total flux cleaned = 0.000250426 Jy
! Component: 150  -  total flux cleaned = 0.000272155 Jy
! Component: 200  -  total flux cleaned = 0.000292539 Jy
! Total flux subtracted in 200 components = 0.000292539 Jy
! Clean residual min=-0.003020 max=0.003440 Jy/beam
! Clean residual mean=-0.000001 rms=0.000775 Jy/beam
! Combined flux in latest and established models = 0.109747 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 108 components and 0.109747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087772Jy  sigma=1.241841
! Fit after  self-cal, rms=0.087808Jy  sigma=1.241746
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (54, 88).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00293843 Jy
! Component: 100  -  total flux cleaned = 0.00301596 Jy
! Component: 150  -  total flux cleaned = 0.00281338 Jy
! Component: 200  -  total flux cleaned = 0.00272585 Jy
! Total flux subtracted in 200 components = 0.00272585 Jy
! Clean residual min=-0.002808 max=0.002814 Jy/beam
! Clean residual mean=-0.000005 rms=0.000716 Jy/beam
! Combined flux in latest and established models = 0.112472 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 126 components and 0.112472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087683Jy  sigma=1.239679
! Fit after  self-cal, rms=0.087679Jy  sigma=1.239570
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087679Jy  sigma=1.239570
! Fit after  self-cal, rms=0.087320Jy  sigma=1.239485
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.943 mas, bmaj=22.28 mas, bpa=-0.01548 degrees
! Estimated noise=0.835926 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.58102e-05 Jy
! Component: 100  -  total flux cleaned = 0.000210889 Jy
! Component: 150  -  total flux cleaned = 0.000149018 Jy
! Component: 200  -  total flux cleaned = 0.000122133 Jy
! Total flux subtracted in 200 components = 0.000122133 Jy
! Clean residual min=-0.002615 max=0.002955 Jy/beam
! Clean residual mean=-0.000005 rms=0.000904 Jy/beam
! Combined flux in latest and established models = 0.112595 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 140 components and 0.112595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087297Jy  sigma=1.239380
! Fit after  self-cal, rms=0.087302Jy  sigma=1.239355
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.39082e-05 Jy
! Component: 100  -  total flux cleaned = 1.97273e-05 Jy
! Component: 150  -  total flux cleaned = 1.97683e-05 Jy
! Component: 200  -  total flux cleaned = -2.54609e-05 Jy
! Total flux subtracted in 200 components = -2.54609e-05 Jy
! Clean residual min=-0.002619 max=0.002899 Jy/beam
! Clean residual mean=-0.000004 rms=0.000898 Jy/beam
! Combined flux in latest and established models = 0.112569 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 143 components and 0.112569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087289Jy  sigma=1.239376
! Fit after  self-cal, rms=0.087291Jy  sigma=1.239369
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.264 mas, bmaj=9.613 mas, bpa=-1.262 degrees
! Estimated noise=0.680959 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.264 x 9.613 at -1.262 degrees (North through East)
! Clean map  min=-0.002646  max=0.094744 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.74 mas, bmaj=8.166 mas, bpa=-2.342 degrees
! Estimated noise=0.916644 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0765393 Jy
! Component: 100  -  total flux cleaned = 0.0942325 Jy
! Component: 150  -  total flux cleaned = 0.101608 Jy
! Component: 200  -  total flux cleaned = 0.106329 Jy
! Total flux subtracted in 200 components = 0.106329 Jy
! Clean residual min=-0.003690 max=0.003806 Jy/beam
! Clean residual mean=0.000002 rms=0.000985 Jy/beam
! Combined flux in latest and established models = 0.106329 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.106329 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.264 mas, bmaj=9.613 mas, bpa=-1.262 degrees
! Estimated noise=0.680959 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0020717 Jy
! Component: 100  -  total flux cleaned = 0.00333361 Jy
! Component: 150  -  total flux cleaned = 0.00361732 Jy
! Component: 200  -  total flux cleaned = 0.00386826 Jy
! Total flux subtracted in 200 components = 0.00386826 Jy
! Clean residual min=-0.002982 max=0.002894 Jy/beam
! Clean residual mean=-0.000007 rms=0.000749 Jy/beam
! Combined flux in latest and established models = 0.110197 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 51 components and 0.110197 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.943 mas, bmaj=22.28 mas, bpa=-0.01548 degrees
! Estimated noise=0.835926 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000863719 Jy
! Component: 100  -  total flux cleaned = 0.00129044 Jy
! Component: 150  -  total flux cleaned = 0.00146837 Jy
! Component: 200  -  total flux cleaned = 0.00150818 Jy
! Total flux subtracted in 200 components = 0.00150818 Jy
! Clean residual min=-0.002682 max=0.003109 Jy/beam
! Clean residual mean=-0.000008 rms=0.000917 Jy/beam
! Combined flux in latest and established models = 0.111705 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000103206 Jy
! Component: 100  -  total flux cleaned = 0.000134192 Jy
! Component: 150  -  total flux cleaned = 0.00010681 Jy
! Component: 200  -  total flux cleaned = 0.000106136 Jy
! Total flux subtracted in 200 components = 0.000106136 Jy
! Clean residual min=-0.002596 max=0.003048 Jy/beam
! Clean residual mean=-0.000007 rms=0.000904 Jy/beam
! Combined flux in latest and established models = 0.111811 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 86 components and 0.111811 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.264 mas, bmaj=9.613 mas, bpa=-1.262 degrees
! Estimated noise=0.680959 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000497202 Jy
! Component: 100  -  total flux cleaned = -0.000650013 Jy
! Component: 150  -  total flux cleaned = -0.000781218 Jy
! Component: 200  -  total flux cleaned = -0.000935213 Jy
! Total flux subtracted in 200 components = -0.000935213 Jy
! Clean residual min=-0.002742 max=0.002719 Jy/beam
! Clean residual mean=-0.000004 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.110876 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 98 components and 0.110876 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087309Jy  sigma=1.239402
! Fit after  self-cal, rms=0.087291Jy  sigma=1.239311
wmodel J1305-3132_S_map.mod
! Writing 98 model components to file: J1305-3132_S_map.mod
wobs   J1305-3132_S_uvs.fits
! Writing UV FITS file: J1305-3132_S_uvs.fits
wwins  J1305-3132_S_map.win
! wwins: Wrote 3 windows to J1305-3132_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000302248 Jy
! Component: 100  -  total flux cleaned = 0.000209381 Jy
! Component: 150  -  total flux cleaned = 0.000119851 Jy
! Component: 200  -  total flux cleaned = 0.00024476 Jy
! Component: 250  -  total flux cleaned = 0.000325602 Jy
! Component: 300  -  total flux cleaned = 0.000481361 Jy
! Component: 350  -  total flux cleaned = 0.000367211 Jy
! Component: 400  -  total flux cleaned = 0.000368222 Jy
! Component: 450  -  total flux cleaned = 0.000476709 Jy
! Component: 500  -  total flux cleaned = 0.000477719 Jy
! Component: 550  -  total flux cleaned = 0.000614753 Jy
! Component: 600  -  total flux cleaned = 0.000648163 Jy
! Component: 650  -  total flux cleaned = 0.000680657 Jy
! Component: 700  -  total flux cleaned = 0.000744591 Jy
! Component: 750  -  total flux cleaned = 0.000775835 Jy
! Component: 800  -  total flux cleaned = 0.000806711 Jy
! Component: 850  -  total flux cleaned = 0.000807231 Jy
! Component: 900  -  total flux cleaned = 0.000866728 Jy
! Component: 950  -  total flux cleaned = 0.000953372 Jy
! Component: 1000  -  total flux cleaned = 0.000867548 Jy
! Component: 1050  -  total flux cleaned = 0.000924261 Jy
! Component: 1100  -  total flux cleaned = 0.000923852 Jy
! Component: 1150  -  total flux cleaned = 0.000842424 Jy
! Component: 1200  -  total flux cleaned = 0.000789303 Jy
! Component: 1250  -  total flux cleaned = 0.000842492 Jy
! Component: 1300  -  total flux cleaned = 0.000790631 Jy
! Component: 1350  -  total flux cleaned = 0.000816963 Jy
! Component: 1400  -  total flux cleaned = 0.000867386 Jy
! Component: 1450  -  total flux cleaned = 0.000792381 Jy
! Component: 1500  -  total flux cleaned = 0.00096503 Jy
! Component: 1550  -  total flux cleaned = 0.00101332 Jy
! Component: 1600  -  total flux cleaned = 0.00103738 Jy
! Component: 1650  -  total flux cleaned = 0.00115534 Jy
! Component: 1700  -  total flux cleaned = 0.00117887 Jy
! Component: 1750  -  total flux cleaned = 0.00124836 Jy
! Component: 1800  -  total flux cleaned = 0.00133963 Jy
! Component: 1850  -  total flux cleaned = 0.0014075 Jy
! Component: 1900  -  total flux cleaned = 0.00149686 Jy
! Component: 1950  -  total flux cleaned = 0.0015408 Jy
! Component: 2000  -  total flux cleaned = 0.00154093 Jy
! Component: 2050  -  total flux cleaned = 0.00164936 Jy
! Component: 2100  -  total flux cleaned = 0.00160679 Jy
! Component: 2150  -  total flux cleaned = 0.00173388 Jy
! Component: 2200  -  total flux cleaned = 0.00173353 Jy
! Component: 2250  -  total flux cleaned = 0.00181648 Jy
! Component: 2300  -  total flux cleaned = 0.00185759 Jy
! Component: 2350  -  total flux cleaned = 0.00195937 Jy
! Component: 2400  -  total flux cleaned = 0.00204036 Jy
! Component: 2450  -  total flux cleaned = 0.00210006 Jy
! Component: 2500  -  total flux cleaned = 0.00223843 Jy
! Component: 2550  -  total flux cleaned = 0.00229711 Jy
! Component: 2600  -  total flux cleaned = 0.00227796 Jy
! Component: 2650  -  total flux cleaned = 0.00241292 Jy
! Component: 2700  -  total flux cleaned = 0.0025082 Jy
! Component: 2750  -  total flux cleaned = 0.00252704 Jy
! Component: 2800  -  total flux cleaned = 0.0025644 Jy
! Component: 2850  -  total flux cleaned = 0.00267579 Jy
! Component: 2900  -  total flux cleaned = 0.00278608 Jy
! Component: 2950  -  total flux cleaned = 0.00285913 Jy
! Component: 3000  -  total flux cleaned = 0.00296773 Jy
! Component: 3050  -  total flux cleaned = 0.00307574 Jy
! Component: 3100  -  total flux cleaned = 0.00312931 Jy
! Component: 3150  -  total flux cleaned = 0.00321764 Jy
! Component: 3200  -  total flux cleaned = 0.00330517 Jy
! Component: 3250  -  total flux cleaned = 0.00337483 Jy
! Component: 3300  -  total flux cleaned = 0.00344385 Jy
! Component: 3350  -  total flux cleaned = 0.00349526 Jy
! Component: 3400  -  total flux cleaned = 0.00358049 Jy
! Component: 3450  -  total flux cleaned = 0.00364813 Jy
! Component: 3500  -  total flux cleaned = 0.00379938 Jy
! Component: 3550  -  total flux cleaned = 0.00384943 Jy
! Component: 3600  -  total flux cleaned = 0.00389921 Jy
! Component: 3650  -  total flux cleaned = 0.00404728 Jy
! Component: 3700  -  total flux cleaned = 0.00411249 Jy
! Component: 3750  -  total flux cleaned = 0.00417748 Jy
! Component: 3800  -  total flux cleaned = 0.00424194 Jy
! Component: 3850  -  total flux cleaned = 0.00437021 Jy
! Component: 3900  -  total flux cleaned = 0.0044339 Jy
! Component: 3950  -  total flux cleaned = 0.00452887 Jy
! Component: 4000  -  total flux cleaned = 0.00451324 Jy
! Component: 4050  -  total flux cleaned = 0.00459157 Jy
! Total flux subtracted in 4096 components = 0.00459167 Jy
! Clean residual min=-0.000848 max=0.000894 Jy/beam
! Clean residual mean=0.000000 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.115468 Jy
keep
! Adding 294 model components to the UV plane model.
! The established model now contains 392 components and 0.115468 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1305-3132_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.264 x 9.613 at -1.262 degrees (North through East)
! Clean map  min=-0.0021016  max=0.09605 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1305-3132_S_map.fits
wmodel /vlbi/uf001/uva//J1305-3132_S_map.mod
! Writing 392 model components to file: /vlbi/uf001/uva//J1305-3132_S_map.mod
wobs   /vlbi/uf001/uva//J1305-3132_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1305-3132_S_uvs.fits
wwins  /vlbi/uf001/uva//J1305-3132_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1305-3132_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0960504 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000294035 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.918378 0.918378 1.83676 3.67351 7.34703 14.6941 29.3881 58.7762
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.096 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  326.662 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1305-3132_S_dfm.log closed on Mon Jan 14 02:11:49 2019